Modernize hekate_ipl.ini once again.

Additionally explain in **explicit words** that stock option disables CFW kips.

README.md

@@ -92,7 +92,7 @@ You can find a template [Here](./res/hekate_ipl_template.ini)
 | emupath={SD folder}    | Forces emuMMC to use the selected one. (=emuMMC/RAW1, =emuMMC/SD00, etc). emuMMC must be created by hekate because it uses the raw_based/file_based files. |
 | emummcforce=1          | Forces the use of emuMMC. If emummc.ini is disabled or not found, then it causes an error. |
 | emummc_force_disable=1 | Disables emuMMC, if it's enabled.                           |
-| stock=1                | Disables unneeded kernel patching when running stock or semi-stock. `If emuMMC is enabled, emummc_force_disabled=1` is required. emuMMC is not supported on stock. If additional KIPs are needed other than OFW's, you can define them with `kip1` key. No kip should be used that relies on Atmosphère patching, because it will hang. If `NOGC` is needed, use `kip1patch=nogc`. |
+| stock=1                | Disables unneeded kernel patching and CFW kips when running stock or semi-stock. `If emuMMC is enabled, emummc_force_disabled=1` is required. emuMMC is not supported on stock. If additional KIPs are needed other than OFW's, you can define them with `kip1` key. No kip should be used that relies on Atmosphère patching, because it will hang. If `NOGC` is needed, use `kip1patch=nogc`. |
 | id=idname              | Identifies boot entry for forced boot via id. Max 7 chars. |
 | payload={SD path}      | Payload launching. Tools, Linux, CFW bootloaders, etc.     |
 | logopath={SD path}     | If no logopath, `bootloader/bootlogo.bmp` will be used if exists. If logopath exists, it will load the specified bitmap. |

res/hekate_ipl_template.ini

@@ -6,37 +6,53 @@ backlight=100
 autohosoff=0
 autonogc=1
 updater2p=1
+bootprotect=0
+
 
 {-------- Stock -------}
-[Stock 6.2.0 and lower]
+[Stock]
-stock=1
-emummc_force_disable=1
-
-[Stock All FW]
 fss0=atmosphere/fusee-secondary.bin
 stock=1
 emummc_force_disable=1
-# Both above disable kernel patching
-# Stock All FW, includes exosphere and warmboot, ONLY when >= 7.0.0.
 
-[Stock emuMMC All FW]
+# This disables kernel patching and CFW kips.
-fss0=atmosphere/fusee-secondary.bin
+# Includes exosphere and warmboot, ONLY when >= 7.0.0 and Erista.
-stock=1
+# Includes exosphere on Mariko.
-{ }
+# Exosphere/warmboot are not identifiable as it is now.
+# This is the closest to OFW, especially when AutoRCM is needed.
+
+
 
 {-- Custom Firmwares --}
-[Atmo FSS0 Vanilla]
+[Atmo Vanilla]
 fss0=atmosphere/fusee-secondary.bin
-logopath=bootloader/res/bootlogo_atmo.bmp
-icon=bootloader/res/icon_atmo.bmp
 
 # Note:
+# The above adheres to emummc.ini. It will launch emuMMC if enabled, otherwise sysMMC
 # You can have 2 entries of everything where one can boot with emuMMC and one without,
-#  via the emummc_force_disable=1 key.
+#  via the emummc_force_disable=1 and emummcforce=1 keys. Examples follow below.
-# logopath= key is for bootlogo. icon= key is for Nyx icon.
+
-# All entries can have these stylistic keys.
+[Atmo EMU]
+fss0=atmosphere/fusee-secondary.bin
+emummcforce=1
+
+[Atmo SYS]
+fss0=atmosphere/fusee-secondary.bin
+emummc_force_disable=1
 
 
+[Atmo with extra kips]
+fss0=atmosphere/fusee-secondary.bin
+kip1=cfw/mods/mods_extra/*
+kip1=cfw/mods/mods_extra/single/extra.kip
+
+# Note:
+# The above can be used with any fss0 entry. Like the ones above.
+# You can even override atmosphere (fss0) kips with this.
+
+
+
+{-- Custom Firmwares Old methods --}
 [CFW FSS0 extra kips & patches]
 fss0=atmosphere/fusee-secondary.bin
 kip1patch=name_of_patch
@@ -45,12 +61,12 @@ kip1=cfw/mods/mods_extra/single/extra.kip
 
 # Note:
 # Both options for kip1 can be used. Wildcard and single.
-#  You can override kips loaded from FSS0 if you define them after that entry.
+#  You can override kips loaded from FSS0 if you define them after the fss0 key.
 # If kip1 patch resides in patches.ini and that file OR the patch for
 #  current HOS version does not exist, it will error out.
 
 
-[Atmo Vanilla]
+[CFW KIPs method]
 secmon=cfw/mods/exosphere.bin
 warmboot=cfw/mods/lp0fw.bin
 kip1=cfw/mods/loader.kip
@@ -66,7 +82,7 @@ atmosphere=1
 # atmosphere=1 key is IMPORTANT when no FFS0 is defined.
 
 
-[CFW Extra kips]
+[CFW KIPs method with wildcard]
 secmon=cfw/mods/exosphere.bin
 warmboot=cfw/mods/lp0fw.bin
 kip1=cfw/mods/*
@@ -83,7 +99,12 @@ atmosphere=1
 payload=bootloader/payloads/memloader.bin
 
 
-# hekate - CTCaer mod v5.0.0 .ini template
+# hekate - CTCaer mod v5.5.3 .ini template
+
+# All entries in this template can have these stylistic keys.
+# Like logopath= key which is for bootlogo and icon= key for Nyx icon.
+# Other than these there many other keys to choose from, like the exosphere configuration keys.
+# All of them are descibed in the main README.
 
 # NOT TO BE USED AS IS!
 #  Pick [config] and then only the needed [sections]. # or { } lines can be ommited.