mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-08 11:31:44 +00:00
Code Issues Releases Activity

bdk: display: remove max77620 gpio 7 enable

Browse source 
It is actually not used at all.
So do not configure it to save power.
This commit is contained in:
CTCaer 2024-06-05 15:20:27 +03:00
parent 8d49bc3c33
commit 14c482ddce
2 changed files with 7 additions and 13 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

18
bdk/display/di.c
View file

@ -373,13 +373,10 @@ void display_init()
// Get Chip ID.
bool tegra_t210 = hw_get_chip_id() == GP_HIDREV_MAJOR_T210;
// Enable LCD DVDD.
// Enable DSI AVDD.
max7762x_regulator_set_voltage(REGULATOR_LDO0, 1200000);
max7762x_regulator_enable(REGULATOR_LDO0, true);
if (tegra_t210)
max77620_config_gpio(7, MAX77620_GPIO_OUTPUT_ENABLE); // T210: LD0 -> GPIO7 -> LCD.
// Enable Display Interface specific clocks.
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
@ -791,6 +788,10 @@ skip_panel_deinit:
{
gpio_write(GPIO_PORT_I, GPIO_PIN_1, GPIO_LOW); // LCD AVDD -5.4V disable.
gpio_write(GPIO_PORT_I, GPIO_PIN_0, GPIO_LOW); // LCD AVDD +5.4V disable.
// Make sure LCD PWM backlight pin is in PWM0 mode.
gpio_config(GPIO_PORT_V, GPIO_PIN_0, GPIO_MODE_SPIO); // Backlight PWM.
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = PINMUX_TRISTATE | PINMUX_PULL_DOWN | 1; // Set PWM0 mode.
}
usleep(10000);
@ -805,14 +806,7 @@ skip_panel_deinit:
DSI_PAD_CONTROL_VS1_PDIO_CLK | DSI_PAD_CONTROL_VS1_PDIO(0xF);
DSI(_DSIREG(DSI_POWER_CONTROL)) = 0;
// Switch LCD PWM backlight pin to special function mode and enable PWM0 mode.
if (!_nx_aula)
{
gpio_config(GPIO_PORT_V, GPIO_PIN_0, GPIO_MODE_SPIO); // Backlight PWM.
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = PINMUX_TRISTATE | PINMUX_PULL_DOWN | 1; // Set PWM0 mode.
}
// Disable LCD DVDD.
// Disable DSI AVDD.
max7762x_regulator_enable(REGULATOR_LDO0, false);
}

2
bdk/soc/hw_init.c
View file

@ -300,7 +300,7 @@ static void _config_regulators(bool tegra_t210, bool nx_hoag)
gpio_write(GPIO_PORT_E, GPIO_PIN_4, GPIO_LOW);
sd_power_cycle_time_start = get_tmr_ms();
// Disable LCD DVDD to make sure it's in a reset state.
// Disable DSI AVDD to make sure it's in a reset state.
max7762x_regulator_enable(REGULATOR_LDO0, false);
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CNFGBBC, MAX77620_CNFGBBC_RESISTOR_1K);