mirror of
https://github.com/CTCaer/hekate.git
synced 2024-12-27 02:16:02 +00:00
clk: Refactor CLK devices bits
This commit is contained in:
CTCaer
parent
3ddd1c26ad
commit
e158d9bc00
10 changed files with 414 additions and 140 deletions
30
bdk/gfx/di.c
30
bdk/gfx/di.c
|
|
@ -64,28 +64,28 @@ void display_init()
|
|||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO7, MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH | MAX77620_CNFG_GPIO_DRV_PUSHPULL);
|
||||
|
||||
// Enable Display Interface specific clocks.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = 0x1010000; // Clear reset DSI, MIPI_CAL.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = 0x1010000; // Set enable clock DSI, MIPI_CAL.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = 0x18000000; // Clear reset DISP1, HOST1X.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = 0x18000000; // Set enable clock DISP1, HOST1X.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = 0x20000; // Set enable clock UART_FST_MIPI_CAL.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = BIT(CLK_X_UART_FST_MIPI_CAL);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIPI_CAL) = 10; // Set PLLP_OUT3 and div 6 (17MHz).
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_W_SET) = 0x80000; // Set enable clock DSIA_LP.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_W_SET) = BIT(CLK_W_DSIA_LP);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP) = 10; // Set PLLP_OUT and div 6 (68MHz).
|
||||
|
||||
// Disable deep power down.
|
||||
PMC(APBDEV_PMC_IO_DPD_REQ) = 0x40000000;
|
||||
PMC(APBDEV_PMC_IO_DPD_REQ) = 0x40000000;
|
||||
PMC(APBDEV_PMC_IO_DPD2_REQ) = 0x40000000;
|
||||
|
||||
// Config LCD and Backlight pins.
|
||||
PINMUX_AUX(PINMUX_AUX_NFC_EN) &= ~PINMUX_TRISTATE; // PULL_DOWN
|
||||
PINMUX_AUX(PINMUX_AUX_NFC_INT) &= ~PINMUX_TRISTATE; // PULL_DOWN
|
||||
PINMUX_AUX(PINMUX_AUX_NFC_EN) &= ~PINMUX_TRISTATE; // PULL_DOWN
|
||||
PINMUX_AUX(PINMUX_AUX_NFC_INT) &= ~PINMUX_TRISTATE; // PULL_DOWN
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) &= ~PINMUX_TRISTATE; // PULL_DOWN | 1
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) &= ~PINMUX_TRISTATE; // PULL_DOWN
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_RST) &= ~PINMUX_TRISTATE; // PULL_DOWN
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) &= ~PINMUX_TRISTATE; // PULL_DOWN
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_RST) &= ~PINMUX_TRISTATE; // PULL_DOWN
|
||||
|
||||
// Set Backlight +-5V pins mode and direction
|
||||
gpio_config(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_MODE_GPIO);
|
||||
|
|
@ -305,10 +305,10 @@ void display_end()
|
|||
usleep(10000);
|
||||
|
||||
// Disable Display Interface specific clocks.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_SET) = 0x1010000; // Set reset clock DSI, MIPI_CAL.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_CLR) = 0x1010000; // Clear enable clock DSI, MIPI_CAL.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = 0x18000000; // Set reset DISP1, HOST1X.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = 0x18000000; // Clear enable DISP1, HOST1X.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_SET) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_CLR) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
|
||||
|
||||
// Power down pads.
|
||||
DSI(_DSIREG(DSI_PAD_CONTROL_0)) = DSI_PAD_CONTROL_VS1_PULLDN_CLK | DSI_PAD_CONTROL_VS1_PULLDN(0xF) | DSI_PAD_CONTROL_VS1_PDIO_CLK | DSI_PAD_CONTROL_VS1_PDIO(0xF);
|
||||
|
|
|
|||
13
bdk/mem/mc.c
13
bdk/mem/mc.c
|
|
@ -144,13 +144,12 @@ void mc_disable_ahb_redirect()
|
|||
void mc_enable()
|
||||
{
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_EMC) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_EMC) & 0x1FFFFFFF) | 0x40000000;
|
||||
// Enable EMC clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = (CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) & 0xFDFFFFFF) | 0x2000000;
|
||||
// Enable MC clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = (CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) & 0xFFFFFFFE) | 1;
|
||||
// Enable EMC DLL clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = (CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) & 0xFFFFBFFF) | 0x4000;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = 0x2000001; //Clear EMC and MC reset.
|
||||
// Enable memory clocks.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = (CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) & ~BIT(CLK_H_EMC)) | BIT(CLK_H_EMC);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = (CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) & ~BIT(CLK_H_MEM)) | BIT(CLK_H_MEM);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = (CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) & ~BIT(CLK_X_EMC_DLL)) | BIT(CLK_X_EMC_DLL);
|
||||
// Clear clock resets for memory.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = BIT(CLK_H_EMC) | BIT(CLK_H_MEM);
|
||||
usleep(5);
|
||||
|
||||
//#ifdef CONFIG_ENABLE_AHB_REDIRECT
|
||||
|
|
|
|||
|
|
@ -143,9 +143,10 @@ break_nosleep:
|
|||
if (params->clear_clock2_mc1)
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_W_CLR) = 0x40000000; // Clear Reset to MC1.
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = 0x2000001; // Enable EMC and MEM clocks.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = 0x4000; // Enable EMC_DLL clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = 0x2000001; // Clear EMC and MEM resets.
|
||||
// Enable and clear reset for memory clocks.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = BIT(CLK_H_EMC) | BIT(CLK_H_MEM);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = BIT(CLK_X_EMC_DLL);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = BIT(CLK_H_EMC) | BIT(CLK_H_MEM);
|
||||
|
||||
// Set pad macros.
|
||||
EMC(EMC_PMACRO_VTTGEN_CTRL_0) = params->emc_pmacro_vttgen_ctrl0;
|
||||
|
|
|
|||
|
|
@ -94,12 +94,12 @@ void ccplex_boot_cpu0(u32 entry)
|
|||
|
||||
// Configure MSELECT source and enable clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_MSELECT) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_MSELECT) & 0x1FFFFF00) | 6;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) = (CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) & 0xFFFFFFF7) | 8;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) = (CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) & ~BIT(CLK_V_MSELECT)) | BIT(CLK_V_MSELECT);
|
||||
|
||||
// Configure initial CPU clock frequency and enable clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_CCLK_BURST_POLICY) = 0x20008888;
|
||||
CLOCK(CLK_RST_CONTROLLER_SUPER_CCLK_DIVIDER) = 0x80000000;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_V_SET) = 1;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_V_SET) = BIT(CLK_V_CPUG);
|
||||
|
||||
clock_enable_coresight();
|
||||
|
||||
|
|
@ -131,7 +131,7 @@ void ccplex_boot_cpu0(u32 entry)
|
|||
// MC(MC_TZ_SECURITY_CTRL) = 1;
|
||||
|
||||
// Clear MSELECT reset.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_V) &= 0xFFFFFFF7;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_V) &= ~BIT(CLK_V_MSELECT);
|
||||
// Clear NONCPU reset.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_CPUG_CMPLX_CLR) = 0x20000000;
|
||||
// Clear CPU0 reset.
|
||||
|
|
|
|||
134
bdk/soc/clock.c
134
bdk/soc/clock.c
|
|
@ -34,63 +34,63 @@
|
|||
/* clock_t: reset, enable, source, index, clk_src, clk_div */
|
||||
|
||||
static const clock_t _clock_uart[] = {
|
||||
/* UART A */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTA, 6, 0, 2 },
|
||||
/* UART B */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTB, 7, 0, 2 },
|
||||
/* UART C */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_UARTC, 23, 0, 2 },
|
||||
/* UART D */ { CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_UARTD, 1, 0, 2 },
|
||||
/* UART E */ { CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_RST_CONTROLLER_CLK_SOURCE_UARTAPE, 20, 0, 2 }
|
||||
{ CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTA, CLK_L_UARTA, 0, 2 },
|
||||
{ CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTB, CLK_L_UARTB, 0, 2 },
|
||||
{ CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_UARTC, CLK_H_UARTC, 0, 2 },
|
||||
{ CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_UARTD, CLK_U_UARTD, 0, 2 },
|
||||
{ CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_RST_CONTROLLER_CLK_SOURCE_UARTAPE, CLK_Y_UARTAPE, 0, 2 }
|
||||
};
|
||||
|
||||
//I2C default parameters - TLOW: 4, THIGH: 2, DEBOUNCE: 0, FM_DIV: 26.
|
||||
static const clock_t _clock_i2c[] = {
|
||||
/* I2C1 */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_I2C1, 12, 0, 19 }, //20.4MHz -> 100KHz
|
||||
/* I2C2 */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_I2C2, 22, 0, 4 }, //81.6MHz -> 400KHz
|
||||
/* I2C3 */ { CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_I2C3, 3, 0, 4 }, //81.6MHz -> 400KHz
|
||||
/* I2C4 */ { CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_RST_CONTROLLER_CLK_SOURCE_I2C4, 7, 0, 19 }, //20.4MHz -> 100KHz
|
||||
/* I2C5 */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_I2C5, 15, 0, 4 }, //81.6MHz -> 400KHz
|
||||
/* I2C6 */ { CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_RST_CONTROLLER_CLK_SOURCE_I2C6, 6, 0, 19 } //20.4MHz -> 100KHz
|
||||
{ CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_I2C1, CLK_L_I2C1, 0, 19 }, //20.4MHz -> 100KHz
|
||||
{ CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_I2C2, CLK_H_I2C2, 0, 4 }, //81.6MHz -> 400KHz
|
||||
{ CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_I2C3, CLK_U_I2C3, 0, 4 }, //81.6MHz -> 400KHz
|
||||
{ CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_RST_CONTROLLER_CLK_SOURCE_I2C4, CLK_V_I2C4, 0, 19 }, //20.4MHz -> 100KHz
|
||||
{ CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_I2C5, CLK_H_I2C5, 0, 4 }, //81.6MHz -> 400KHz
|
||||
{ CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_RST_CONTROLLER_CLK_SOURCE_I2C6, CLK_X_I2C6, 0, 19 } //20.4MHz -> 100KHz
|
||||
};
|
||||
|
||||
static clock_t _clock_se = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_RST_CONTROLLER_CLK_SOURCE_SE, 31, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_RST_CONTROLLER_CLK_SOURCE_SE, CLK_V_SE, 0, 0
|
||||
};
|
||||
|
||||
static clock_t _clock_tzram = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_NO_SOURCE, 30, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_NO_SOURCE, CLK_V_TZRAM, 0, 0
|
||||
};
|
||||
|
||||
static clock_t _clock_host1x = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X, 28, 4, 3
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X, CLK_L_HOST1X, 4, 3
|
||||
};
|
||||
static clock_t _clock_tsec = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_TSEC, 19, 0, 2
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_TSEC, CLK_U_TSEC, 0, 2
|
||||
};
|
||||
static clock_t _clock_sor_safe = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_NO_SOURCE, 30, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_NO_SOURCE, CLK_Y_SOR_SAFE, 0, 0
|
||||
};
|
||||
static clock_t _clock_sor0 = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_NO_SOURCE, 22, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_NO_SOURCE, CLK_X_SOR0, 0, 0
|
||||
};
|
||||
static clock_t _clock_sor1 = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_RST_CONTROLLER_CLK_SOURCE_SOR1, 23, 0, 2
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_RST_CONTROLLER_CLK_SOURCE_SOR1, CLK_X_SOR1, 0, 2
|
||||
};
|
||||
static clock_t _clock_kfuse = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_NO_SOURCE, 8, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_NO_SOURCE, CLK_H_KFUSE, 0, 0
|
||||
};
|
||||
|
||||
static clock_t _clock_cl_dvfs = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_W, CLK_RST_CONTROLLER_CLK_OUT_ENB_W, CLK_NO_SOURCE, 27, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_W, CLK_RST_CONTROLLER_CLK_OUT_ENB_W, CLK_NO_SOURCE, CLK_W_DVFS, 0, 0
|
||||
};
|
||||
static clock_t _clock_coresight = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_CSITE, 9, 0, 4
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_CSITE, CLK_U_CSITE, 0, 4
|
||||
};
|
||||
|
||||
static clock_t _clock_pwm = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_PWM, 17, 6, 4 // Fref: 6.2MHz.
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_PWM, CLK_L_PWM, 6, 4 // Fref: 6.2MHz.
|
||||
};
|
||||
|
||||
static clock_t _clock_sdmmc_legacy_tm = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM, 1, 4, 66
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM, CLK_Y_SDMMC_LEGACY_TM, 4, 66
|
||||
};
|
||||
|
||||
void clock_enable(const clock_t *clk)
|
||||
|
|
@ -223,12 +223,12 @@ void clock_disable_sor1()
|
|||
|
||||
void clock_enable_kfuse()
|
||||
{
|
||||
//clock_enable(&_clock_kfuse);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_H) = (CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_H) & 0xFFFFFEFF) | 0x100;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_H) &= 0xFFFFFEFF;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_H) = (CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_H) & 0xFFFFFEFF) | 0x100;
|
||||
u32 kfuse_clk_unmask = ~BIT(CLK_H_KFUSE);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_H) = (CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_H) & kfuse_clk_unmask) | BIT(CLK_H_KFUSE);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_H) &= kfuse_clk_unmask;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_H) = (CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_H) & kfuse_clk_unmask) | BIT(CLK_H_KFUSE);
|
||||
usleep(10);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_H) &= 0xFFFFFEFF;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_H) &= kfuse_clk_unmask;
|
||||
usleep(20);
|
||||
}
|
||||
|
||||
|
|
@ -362,48 +362,18 @@ static void _clock_disable_pllc4(u32 mask)
|
|||
pllc4_enabled = 0;
|
||||
}
|
||||
|
||||
#define L_SWR_SDMMC1_RST (1 << 14)
|
||||
#define L_SWR_SDMMC2_RST (1 << 9)
|
||||
#define L_SWR_SDMMC4_RST (1 << 15)
|
||||
#define U_SWR_SDMMC3_RST (1 << 5)
|
||||
|
||||
#define L_CLK_ENB_SDMMC1 (1 << 14)
|
||||
#define L_CLK_ENB_SDMMC2 (1 << 9)
|
||||
#define L_CLK_ENB_SDMMC4 (1 << 15)
|
||||
#define U_CLK_ENB_SDMMC3 (1 << 5)
|
||||
|
||||
#define L_SET_SDMMC1_RST (1 << 14)
|
||||
#define L_SET_SDMMC2_RST (1 << 9)
|
||||
#define L_SET_SDMMC4_RST (1 << 15)
|
||||
#define U_SET_SDMMC3_RST (1 << 5)
|
||||
|
||||
#define L_CLR_SDMMC1_RST (1 << 14)
|
||||
#define L_CLR_SDMMC2_RST (1 << 9)
|
||||
#define L_CLR_SDMMC4_RST (1 << 15)
|
||||
#define U_CLR_SDMMC3_RST (1 << 5)
|
||||
|
||||
#define L_SET_CLK_ENB_SDMMC1 (1 << 14)
|
||||
#define L_SET_CLK_ENB_SDMMC2 (1 << 9)
|
||||
#define L_SET_CLK_ENB_SDMMC4 (1 << 15)
|
||||
#define U_SET_CLK_ENB_SDMMC3 (1 << 5)
|
||||
|
||||
#define L_CLR_CLK_ENB_SDMMC1 (1 << 14)
|
||||
#define L_CLR_CLK_ENB_SDMMC2 (1 << 9)
|
||||
#define L_CLR_CLK_ENB_SDMMC4 (1 << 15)
|
||||
#define U_CLR_CLK_ENB_SDMMC3 (1 << 5)
|
||||
|
||||
static int _clock_sdmmc_is_reset(u32 id)
|
||||
{
|
||||
switch (id)
|
||||
{
|
||||
case SDMMC_1:
|
||||
return CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_L) & L_SWR_SDMMC1_RST;
|
||||
return CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_L) & BIT(CLK_L_SDMMC1);
|
||||
case SDMMC_2:
|
||||
return CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_L) & L_SWR_SDMMC2_RST;
|
||||
return CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_L) & BIT(CLK_L_SDMMC2);
|
||||
case SDMMC_3:
|
||||
return CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_U) & U_SWR_SDMMC3_RST;
|
||||
return CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_U) & BIT(CLK_U_SDMMC3);
|
||||
case SDMMC_4:
|
||||
return CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_L) & L_SWR_SDMMC4_RST;
|
||||
return CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_L) & BIT(CLK_L_SDMMC4);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -413,16 +383,16 @@ static void _clock_sdmmc_set_reset(u32 id)
|
|||
switch (id)
|
||||
{
|
||||
case SDMMC_1:
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = L_SET_SDMMC1_RST;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = BIT(CLK_L_SDMMC1);
|
||||
break;
|
||||
case SDMMC_2:
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = L_SET_SDMMC2_RST;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = BIT(CLK_L_SDMMC2);
|
||||
break;
|
||||
case SDMMC_3:
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_U_SET) = U_SET_SDMMC3_RST;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_U_SET) = BIT(CLK_U_SDMMC3);
|
||||
break;
|
||||
case SDMMC_4:
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = L_SET_SDMMC4_RST;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = BIT(CLK_L_SDMMC4);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
|
@ -432,16 +402,16 @@ static void _clock_sdmmc_clear_reset(u32 id)
|
|||
switch (id)
|
||||
{
|
||||
case SDMMC_1:
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = L_CLR_SDMMC1_RST;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_SDMMC1);
|
||||
break;
|
||||
case SDMMC_2:
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = L_CLR_SDMMC2_RST;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_SDMMC2);
|
||||
break;
|
||||
case SDMMC_3:
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_U_CLR) = U_CLR_SDMMC3_RST;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_U_CLR) = BIT(CLK_U_SDMMC3);
|
||||
break;
|
||||
case SDMMC_4:
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = L_CLR_SDMMC4_RST;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_SDMMC4);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
|
@ -451,13 +421,13 @@ static int _clock_sdmmc_is_enabled(u32 id)
|
|||
switch (id)
|
||||
{
|
||||
case SDMMC_1:
|
||||
return CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) & L_CLK_ENB_SDMMC1;
|
||||
return CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) & BIT(CLK_L_SDMMC1);
|
||||
case SDMMC_2:
|
||||
return CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) & L_CLK_ENB_SDMMC2;
|
||||
return CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) & BIT(CLK_L_SDMMC2);
|
||||
case SDMMC_3:
|
||||
return CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_U) & U_CLK_ENB_SDMMC3;
|
||||
return CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_U) & BIT(CLK_U_SDMMC3);
|
||||
case SDMMC_4:
|
||||
return CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) & L_CLK_ENB_SDMMC4;
|
||||
return CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) & BIT(CLK_L_SDMMC4);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -467,16 +437,16 @@ static void _clock_sdmmc_set_enable(u32 id)
|
|||
switch (id)
|
||||
{
|
||||
case SDMMC_1:
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = L_SET_CLK_ENB_SDMMC1;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = BIT(CLK_L_SDMMC1);
|
||||
break;
|
||||
case SDMMC_2:
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = L_SET_CLK_ENB_SDMMC2;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = BIT(CLK_L_SDMMC2);
|
||||
break;
|
||||
case SDMMC_3:
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_U_SET) = U_SET_CLK_ENB_SDMMC3;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_U_SET) = BIT(CLK_U_SDMMC3);
|
||||
break;
|
||||
case SDMMC_4:
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = L_SET_CLK_ENB_SDMMC4;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = BIT(CLK_L_SDMMC4);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
|
@ -486,16 +456,16 @@ static void _clock_sdmmc_clear_enable(u32 id)
|
|||
switch (id)
|
||||
{
|
||||
case SDMMC_1:
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = L_CLR_CLK_ENB_SDMMC1;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = BIT(CLK_L_SDMMC1);
|
||||
break;
|
||||
case SDMMC_2:
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = L_CLR_CLK_ENB_SDMMC2;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = BIT(CLK_L_SDMMC2);
|
||||
break;
|
||||
case SDMMC_3:
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_U_CLR) = U_CLR_CLK_ENB_SDMMC3;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_U_CLR) = BIT(CLK_U_SDMMC3);
|
||||
break;
|
||||
case SDMMC_4:
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = L_CLR_CLK_ENB_SDMMC4;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = BIT(CLK_L_SDMMC4);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
|
|
|||
263
bdk/soc/clock.h
263
bdk/soc/clock.h
|
|
@ -171,6 +171,269 @@
|
|||
#define PLLC4_OUT3_CLKEN (1 << 1)
|
||||
#define PLLC4_OUT3_RSTN_CLR (1 << 0)
|
||||
|
||||
/*
|
||||
* CLOCK Peripherals:
|
||||
* L 0 - 31
|
||||
* H 32 - 63
|
||||
* U 64 - 95
|
||||
* V 96 - 127
|
||||
* W 128 - 159
|
||||
* X 160 - 191
|
||||
* Y 192 - 223
|
||||
*/
|
||||
|
||||
enum CLK_L_DEV
|
||||
{
|
||||
CLK_L_CPU = 0, // Only reset. Deprecated.
|
||||
CLK_L_BPMP = 1, // Only reset.
|
||||
CLK_L_SYS = 2, // Only reset.
|
||||
CLK_L_ISPB = 3,
|
||||
CLK_L_RTC = 4,
|
||||
CLK_L_TMR = 5,
|
||||
CLK_L_UARTA = 6,
|
||||
CLK_L_UARTB = 7,
|
||||
CLK_L_GPIO = 8,
|
||||
CLK_L_SDMMC2 = 9,
|
||||
CLK_L_SPDIF = 10,
|
||||
CLK_L_I2S2 = 11, // I2S1
|
||||
CLK_L_I2C1 = 12,
|
||||
CLK_L_NDFLASH = 13, // HIDDEN.
|
||||
CLK_L_SDMMC1 = 14,
|
||||
CLK_L_SDMMC4 = 15,
|
||||
CLK_L_TWC = 16, // HIDDEN.
|
||||
CLK_L_PWM = 17,
|
||||
CLK_L_I2S3 = 18,
|
||||
CLK_L_EPP = 19, // HIDDEN.
|
||||
CLK_L_VI = 20,
|
||||
CLK_L_2D = 21, // HIDDEN.
|
||||
CLK_L_USBD = 22,
|
||||
CLK_L_ISP = 23,
|
||||
CLK_L_3D = 24, // HIDDEN.
|
||||
//CLK_L_ = 25,
|
||||
CLK_L_DISP2 = 26,
|
||||
CLK_L_DISP1 = 27,
|
||||
CLK_L_HOST1X = 28,
|
||||
CLK_L_VCP = 29, // HIDDEN.
|
||||
CLK_L_I2S1 = 30, // I2S0
|
||||
CLK_L_BPMP_CACHE_CTRL = 31, // CONTROLLER
|
||||
};
|
||||
|
||||
enum CLK_H_DEV
|
||||
{
|
||||
CLK_H_MEM = 0, // MC.
|
||||
CLK_H_AHBDMA = 1,
|
||||
CLK_H_APBDMA = 2,
|
||||
//CLK_H_ = 3,
|
||||
CLK_H_KBC = 4, // HIDDEN.
|
||||
CLK_H_STAT_MON = 5,
|
||||
CLK_H_PMC = 6,
|
||||
CLK_H_FUSE = 7,
|
||||
CLK_H_KFUSE = 8,
|
||||
CLK_H_SPI1 = 9,
|
||||
CLK_H_SNOR = 10, // HIDDEN.
|
||||
CLK_H_JTAG2TBC = 11,
|
||||
CLK_H_SPI2 = 12,
|
||||
CLK_H_XIO = 13, // HIDDEN.
|
||||
CLK_H_SPI3 = 14,
|
||||
CLK_H_I2C5 = 15,
|
||||
CLK_H_DSI = 16,
|
||||
//CLK_H_ = 17,
|
||||
CLK_H_HSI = 18, // HIDDEN.
|
||||
CLK_H_HDMI = 19, // HIDDEN.
|
||||
CLK_H_CSI = 20,
|
||||
//CLK_H_ = 21,
|
||||
CLK_H_I2C2 = 22,
|
||||
CLK_H_UARTC = 23,
|
||||
CLK_H_MIPI_CAL = 24,
|
||||
CLK_H_EMC = 25,
|
||||
CLK_H_USB2 = 26,
|
||||
CLK_H_USB3 = 27, // HIDDEN.
|
||||
CLK_H_MPE = 28, // HIDDEN.
|
||||
CLK_H_VDE = 29, // HIDDEN.
|
||||
CLK_H_BSEA = 30, // HIDDEN.
|
||||
CLK_H_BSEV = 31,
|
||||
};
|
||||
|
||||
enum CLK_U_DEV
|
||||
{
|
||||
//CLK_U_ = 0,
|
||||
CLK_U_UARTD = 1,
|
||||
CLK_U_UARTE = 2, // HIDDEN.
|
||||
CLK_U_I2C3 = 3,
|
||||
CLK_U_SPI4 = 4,
|
||||
CLK_U_SDMMC3 = 5,
|
||||
CLK_U_PCIE = 6,
|
||||
CLK_U_UNUSED = 7, // RESERVED
|
||||
CLK_U_AFI = 8,
|
||||
CLK_U_CSITE = 9,
|
||||
CLK_U_PCIEXCLK = 10, // Only reset.
|
||||
CLK_U_BPMPUCQ = 11, // HIDDEN.
|
||||
CLK_U_LA = 12,
|
||||
CLK_U_TRACECLKIN = 13, // HIDDEN.
|
||||
CLK_U_SOC_THERM = 14,
|
||||
CLK_U_DTV = 15,
|
||||
CLK_U_NAND_SPEED = 16, // HIDDEN.
|
||||
CLK_U_I2C_SLOW = 17,
|
||||
CLK_U_DSIB = 18,
|
||||
CLK_U_TSEC = 19,
|
||||
CLK_U_IRAMA = 20,
|
||||
CLK_U_IRAMB = 21,
|
||||
CLK_U_IRAMC = 22,
|
||||
CLK_U_IRAMD = 23, // EMUCIF ON RESET
|
||||
CLK_U_BPMP_CACHE_RAM = 24,
|
||||
CLK_U_XUSB_HOST = 25,
|
||||
CLK_U_CLK_M_DOUBLER = 26,
|
||||
CLK_U_MSENC = 27, // HIDDEN.
|
||||
CLK_U_SUS_OUT = 28,
|
||||
CLK_U_DEV2_OUT = 29,
|
||||
CLK_U_DEV1_OUT = 30,
|
||||
CLK_U_XUSB_DEV = 31,
|
||||
};
|
||||
|
||||
enum CLK_V_DEV
|
||||
{
|
||||
CLK_V_CPUG = 0,
|
||||
CLK_V_CPULP = 1, // Reserved.
|
||||
CLK_V_3D2 = 2, // HIDDEN.
|
||||
CLK_V_MSELECT = 3,
|
||||
CLK_V_TSENSOR = 4,
|
||||
CLK_V_I2S4 = 5,
|
||||
CLK_V_I2S5 = 6,
|
||||
CLK_V_I2C4 = 7,
|
||||
CLK_V_SPI5 = 8, // HIDDEN.
|
||||
CLK_V_SPI6 = 9, // HIDDEN.
|
||||
CLK_V_AHUB = 10, // AUDIO.
|
||||
CLK_V_APB2APE = 11, // APBIF.
|
||||
CLK_V_DAM0 = 12, // HIDDEN.
|
||||
CLK_V_DAM1 = 13, // HIDDEN.
|
||||
CLK_V_DAM2 = 14, // HIDDEN.
|
||||
CLK_V_HDA2CODEC_2X = 15,
|
||||
CLK_V_ATOMICS = 16,
|
||||
//CLK_V_ = 17,
|
||||
//CLK_V_ = 18,
|
||||
//CLK_V_ = 19,
|
||||
//CLK_V_ = 20,
|
||||
//CLK_V_ = 21,
|
||||
CLK_V_SPDIF_DOUBLER = 22,
|
||||
CLK_V_ACTMON = 23,
|
||||
CLK_V_EXTPERIPH1 = 24,
|
||||
CLK_V_EXTPERIPH2 = 25,
|
||||
CLK_V_EXTPERIPH3 = 26,
|
||||
CLK_V_SATA_OOB = 27,
|
||||
CLK_V_SATA = 28,
|
||||
CLK_V_HDA = 29,
|
||||
CLK_V_TZRAM = 30, // HIDDEN.
|
||||
CLK_V_SE = 31, // HIDDEN.
|
||||
};
|
||||
|
||||
enum CLK_W_DEV
|
||||
{
|
||||
CLK_W_HDA2HDMICODEC = 0,
|
||||
CLK_W_RESERVED0 = 1, //satacoldrstn
|
||||
CLK_W_PCIERX0 = 2,
|
||||
CLK_W_PCIERX1 = 3,
|
||||
CLK_W_PCIERX2 = 4,
|
||||
CLK_W_PCIERX3 = 5,
|
||||
CLK_W_PCIERX4 = 6,
|
||||
CLK_W_PCIERX5 = 7,
|
||||
CLK_W_CEC = 8,
|
||||
CLK_W_PCIE2_IOBIST = 9,
|
||||
CLK_W_EMC_IOBIST = 10,
|
||||
CLK_W_HDMI_IOBIST = 11, // HIDDEN.
|
||||
CLK_W_SATA_IOBIST = 12,
|
||||
CLK_W_MIPI_IOBIST = 13,
|
||||
CLK_W_XUSB_PADCTL = 14, // Only reset.
|
||||
CLK_W_XUSB = 15,
|
||||
CLK_W_CILAB = 16,
|
||||
CLK_W_CILCD = 17,
|
||||
CLK_W_CILEF = 18,
|
||||
CLK_W_DSIA_LP = 19,
|
||||
CLK_W_DSIB_LP = 20,
|
||||
CLK_W_ENTROPY = 21,
|
||||
CLK_W_DDS = 22, // HIDDEN.
|
||||
//CLK_W_ = 23,
|
||||
CLK_W_DP2 = 24, // HIDDEN.
|
||||
CLK_W_AMX0 = 25, // HIDDEN.
|
||||
CLK_W_ADX0 = 26, // HIDDEN.
|
||||
CLK_W_DVFS = 27,
|
||||
CLK_W_XUSB_SS = 28,
|
||||
CLK_W_EMC_LATENCY = 29,
|
||||
CLK_W_MC1 = 30,
|
||||
//CLK_W_ = 31,
|
||||
};
|
||||
|
||||
enum CLK_X_DEV
|
||||
{
|
||||
CLK_X_SPARE = 0,
|
||||
CLK_X_DMIC1 = 1,
|
||||
CLK_X_DMIC2 = 2,
|
||||
CLK_X_ETR = 3,
|
||||
CLK_X_CAM_MCLK = 4,
|
||||
CLK_X_CAM_MCLK2 = 5,
|
||||
CLK_X_I2C6 = 6,
|
||||
CLK_X_MC_CAPA = 7, // MC DAISY CHAIN1
|
||||
CLK_X_MC_CBPA = 8, // MC DAISY CHAIN2
|
||||
CLK_X_MC_CPU = 9,
|
||||
CLK_X_MC_BBC = 10,
|
||||
CLK_X_VIM2_CLK = 11,
|
||||
//CLK_X_ = 12,
|
||||
CLK_X_MIPIBIF = 13, //RESERVED
|
||||
CLK_X_EMC_DLL = 14,
|
||||
//CLK_X_ = 15,
|
||||
CLK_X_HDMI_AUDIO = 16, // HIDDEN.
|
||||
CLK_X_UART_FST_MIPI_CAL = 17,
|
||||
CLK_X_VIC = 18,
|
||||
//CLK_X_ = 19,
|
||||
CLK_X_ADX1 = 20, // HIDDEN.
|
||||
CLK_X_DPAUX = 21,
|
||||
CLK_X_SOR0 = 22,
|
||||
CLK_X_SOR1 = 23,
|
||||
CLK_X_GPU = 24,
|
||||
CLK_X_DBGAPB = 25,
|
||||
CLK_X_HPLL_ADSP = 26,
|
||||
CLK_X_PLLP_ADSP = 27,
|
||||
CLK_X_PLLA_ADSP = 28,
|
||||
CLK_X_PLLG_REF = 29,
|
||||
//CLK_X_ = 30,
|
||||
//CLK_X_ = 31,
|
||||
};
|
||||
|
||||
enum CLK_Y_DEV
|
||||
{
|
||||
CLK_Y_SPARE1 = 0,
|
||||
CLK_Y_SDMMC_LEGACY_TM = 1,
|
||||
CLK_Y_NVDEC = 2,
|
||||
CLK_Y_NVJPG = 3,
|
||||
CLK_Y_AXIAP = 4,
|
||||
CLK_Y_DMIC3 = 5,
|
||||
CLK_Y_APE = 6,
|
||||
CLK_Y_ADSP = 7,
|
||||
CLK_Y_MC_CDPA = 8, // MC DAISY CHAIN4
|
||||
CLK_Y_MC_CCPA = 9, // MC DAISY CHAIN3
|
||||
CLK_Y_MAUD = 10,
|
||||
//CLK_Y_ = 11,
|
||||
CLK_Y_SATA_USB_UPHY = 12, // Only reset.
|
||||
CLK_Y_PEX_USB_UPHY = 13, // Only reset.
|
||||
CLK_Y_TSECB = 14,
|
||||
CLK_Y_DPAUX1 = 15,
|
||||
CLK_Y_VI_I2C = 16,
|
||||
CLK_Y_HSIC_TRK = 17,
|
||||
CLK_Y_USB2_TRK = 18,
|
||||
CLK_Y_QSPI = 19,
|
||||
CLK_Y_UARTAPE = 20,
|
||||
CLK_Y_ADSPINTF = 21, // Only reset.
|
||||
CLK_Y_ADSPPERIPH = 22, // Only reset.
|
||||
CLK_Y_ADSPDBG = 23, // Only reset.
|
||||
CLK_Y_ADSPWDT = 24, // Only reset.
|
||||
CLK_Y_ADSPSCU = 25, // Only reset.
|
||||
CLK_Y_ADSPNEON = 26,
|
||||
CLK_Y_NVENC = 27,
|
||||
CLK_Y_IQC2 = 28,
|
||||
CLK_Y_IQC1 = 29,
|
||||
CLK_Y_SOR_SAFE = 30,
|
||||
CLK_Y_PLLP_OUT_CPU = 31,
|
||||
};
|
||||
|
||||
/*! Generic clock descriptor. */
|
||||
typedef struct _clock_t
|
||||
{
|
||||
|
|
|
|||
|
|
@ -129,18 +129,19 @@ void _config_pmc_scratch()
|
|||
|
||||
void _mbist_workaround()
|
||||
{
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) |= (1 << 10); // Enable AHUB clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) |= (1 << 6); // Enable APE clock.
|
||||
// Make sure Audio clocks are enabled before accessing I2S.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) |= BIT(CLK_V_AHUB);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) |= BIT(CLK_Y_APE);
|
||||
|
||||
// Set mux output to SOR1 clock switch.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) | 0x8000) & 0xFFFFBFFF;
|
||||
// Enabled PLLD and set csi to PLLD for test pattern generation.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) |= 0x40800000;
|
||||
|
||||
// Clear per-clock resets.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_Y_CLR) = 0x40; // Clear reset APE.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_X_CLR) = 0x40000; // Clear reset VIC.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = 0x18000000; // Clear reset DISP1, HOST1X.
|
||||
// Clear per-clock resets for APE/VIC/HOST1X/DISP1.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_Y_CLR) = BIT(CLK_Y_APE);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_X_CLR) = BIT(CLK_X_VIC);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
|
||||
usleep(2);
|
||||
|
||||
// I2S channels to master and disable SLCG.
|
||||
|
|
@ -159,20 +160,59 @@ void _mbist_workaround()
|
|||
VIC(0x8C) = 0xFFFFFFFF;
|
||||
usleep(2);
|
||||
|
||||
// Set per-clock reset.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_Y_SET) = 0x40; // Set reset APE.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = 0x18000000; // Set reset DISP1, HOST1x.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_X_SET) = 0x40000; // Set reset VIC.
|
||||
// Set per-clock reset for APE/VIC/HOST1X/DISP1.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_Y_SET) = BIT(CLK_Y_APE);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_X_SET) = BIT(CLK_X_VIC);
|
||||
|
||||
// Enable specific clocks and disable all others.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_H) = 0xC0; // Enable clock PMC, FUSE.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) = 0x80000130; // Enable clock RTC, TMR, GPIO, BPMP_CACHE.
|
||||
//CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) = 0x80400130; // Keep USBD ON.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_U) = 0x1F00200; // Enable clock CSITE, IRAMA, IRAMB, IRAMC, IRAMD, BPMP_CACHE_RAM.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) = 0x80400808; // Enable clock MSELECT, APB2APE, SPDIF_DOUBLER, SE.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_W) = 0x402000FC; // Enable clock PCIERX0, PCIERX1, PCIERX2, PCIERX3, PCIERX4, PCIERX5, ENTROPY, MC1.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_X) = 0x23000780; // Enable clock MC_CAPA, MC_CAPB, MC_CPU, MC_BBC, DBGAPB, HPLL_ADSP, PLLG_REF.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) = 0x300; // Enable clock MC_CDPA, MC_CCPA.
|
||||
// CLK L Devices.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_H) =
|
||||
BIT(CLK_H_PMC) |
|
||||
BIT(CLK_H_FUSE);
|
||||
// CLK H Devices.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) =
|
||||
BIT(CLK_L_RTC) |
|
||||
BIT(CLK_L_TMR) |
|
||||
BIT(CLK_L_GPIO) |
|
||||
BIT(CLK_L_BPMP_CACHE_CTRL);
|
||||
// CLK U Devices.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_U) =
|
||||
BIT(CLK_U_CSITE) |
|
||||
BIT(CLK_U_IRAMA) |
|
||||
BIT(CLK_U_IRAMB) |
|
||||
BIT(CLK_U_IRAMC) |
|
||||
BIT(CLK_U_IRAMD) |
|
||||
BIT(CLK_U_BPMP_CACHE_RAM);
|
||||
// CLK V Devices.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) =
|
||||
BIT(CLK_V_MSELECT) |
|
||||
BIT(CLK_V_APB2APE) |
|
||||
BIT(CLK_V_SPDIF_DOUBLER) |
|
||||
BIT(CLK_V_SE);
|
||||
// CLK W Devices.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_W) =
|
||||
BIT(CLK_W_PCIERX0) |
|
||||
BIT(CLK_W_PCIERX1) |
|
||||
BIT(CLK_W_PCIERX2) |
|
||||
BIT(CLK_W_PCIERX3) |
|
||||
BIT(CLK_W_PCIERX4) |
|
||||
BIT(CLK_W_PCIERX5) |
|
||||
BIT(CLK_W_ENTROPY) |
|
||||
BIT(CLK_W_MC1);
|
||||
// CLK X Devices.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_X) =
|
||||
BIT(CLK_X_MC_CAPA) |
|
||||
BIT(CLK_X_MC_CBPA) |
|
||||
BIT(CLK_X_MC_CPU) |
|
||||
BIT(CLK_X_MC_BBC) |
|
||||
BIT(CLK_X_GPU) |
|
||||
BIT(CLK_X_DBGAPB) |
|
||||
BIT(CLK_X_PLLG_REF);
|
||||
// CLK Y Devices.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) =
|
||||
BIT(CLK_Y_MC_CDPA) |
|
||||
BIT(CLK_Y_MC_CCPA);
|
||||
|
||||
// Disable clock gate overrides.
|
||||
CLOCK(CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRA) = 0;
|
||||
|
|
@ -353,8 +393,8 @@ void reconfig_hw_workaround(bool extra_reconfig, u32 magic)
|
|||
nyx_str->mtc_cfg.init_done = 0;
|
||||
|
||||
// Re-enable clocks to Audio Processing Engine as a workaround to hanging.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) |= (1 << 10); // Enable AHUB clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) |= (1 << 6); // Enable APE clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) |= BIT(CLK_V_AHUB);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) |= BIT(CLK_Y_APE);
|
||||
|
||||
if (extra_reconfig)
|
||||
{
|
||||
|
|
@ -376,7 +416,7 @@ void reconfig_hw_workaround(bool extra_reconfig, u32 magic)
|
|||
// Enable clock to USBD and init SDMMC1 to avoid hangs with bad hw inits.
|
||||
if (magic == 0xBAADF00D)
|
||||
{
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) |= (1 << 22);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = BIT(CLK_L_USBD);
|
||||
sdmmc_init(&sd_sdmmc, SDMMC_1, SDMMC_POWER_3_3, SDMMC_BUS_WIDTH_1, SDHCI_TIMING_SD_ID, 0);
|
||||
clock_disable_cl_dvfs();
|
||||
|
||||
|
|
|
|||
|
|
@ -351,15 +351,15 @@ int usb_device_init()
|
|||
CLOCK(CLK_RST_CONTROLLER_PLLU_BASE) = CLOCK(CLK_RST_CONTROLLER_PLLU_BASE) | 0x2600000 | 0x800000;
|
||||
|
||||
// Enable USBD clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = (1 << 22);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = BIT(CLK_L_USBD);
|
||||
usleep(2);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = (1 << 22);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = BIT(CLK_L_USBD);
|
||||
usleep(2);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = (1 << 22);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_USBD);
|
||||
usleep(2);
|
||||
|
||||
// Clear XUSB_PADCTL reset
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_W_CLR) = (1 << 14);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_W_CLR) = BIT(CLK_W_XUSB_PADCTL);
|
||||
|
||||
// Enable USB PHY and reset for programming.
|
||||
u32 usb_susp_ctrl = USB(USB1_IF_USB_SUSP_CTRL);
|
||||
|
|
@ -419,7 +419,7 @@ int usb_device_init()
|
|||
// Enable crystal clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_UTMIP_PLL_CFG2) |= 0x40000000;
|
||||
// Enable USB2 tracking.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) |= 0x40000;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_Y_SET) = BIT(CLK_Y_USB2_TRK);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_USB2_HSIC_TRK) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_USB2_HSIC_TRK) & 0xFFFFFF00) | 6; // Set trank divisor to 4.
|
||||
|
||||
USB(USB1_UTMIP_BIAS_CFG1) = (USB(USB1_UTMIP_BIAS_CFG1) & 0xFFC03F07) | 0x78000 | 0x50; // Set delays.
|
||||
|
|
@ -442,7 +442,7 @@ int usb_device_init()
|
|||
USB(USB1_UTMIP_BIAS_CFG1) = (USB(USB1_UTMIP_BIAS_CFG1) & 0xFF7FFFFF) | 1;
|
||||
|
||||
// Disable USB2_TRK clock and configure UTMIP misc.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) &= 0xFFFBFFFF;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_Y_CLR) = BIT(CLK_Y_USB2_TRK);
|
||||
CLOCK(CLK_RST_CONTROLLER_UTMIP_PLL_CFG2) = (CLOCK(CLK_RST_CONTROLLER_UTMIP_PLL_CFG2) & 0xFEFFFFEA) | 0x2000000 | 0x28 | 2;
|
||||
usleep(1);
|
||||
|
||||
|
|
@ -535,10 +535,10 @@ static void _usb_device_power_down()
|
|||
CLOCK(CLK_RST_CONTROLLER_UTMIPLL_HW_PWRDN_CFG0) |= 2;
|
||||
|
||||
// Set XUSB_PADCTL reset
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_W_SET) = (1 << 14);
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_W_SET) = BIT(CLK_W_XUSB_PADCTL);
|
||||
|
||||
// Disable USBD clock.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = (1 << 22);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = BIT(CLK_L_USBD);
|
||||
|
||||
// Completely disable PLLU.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLU_BASE) &= ~0x2E00000; // Disable PLLU USB/HSIC/ICUSB/48M.
|
||||
|
|
|
|||
|
|
@ -21,6 +21,7 @@
|
|||
|
||||
#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
|
||||
#define ALIGN_DOWN(x, a) (((x) - ((a) - 1)) & ~((a) - 1))
|
||||
#define BIT(n) (1U << (n))
|
||||
#define MAX(a, b) ((a) > (b) ? (a) : (b))
|
||||
#define MIN(a, b) ((a) < (b) ? (a) : (b))
|
||||
|
||||
|
|
|
|||
|
|
@ -1034,7 +1034,7 @@ int hos_launch(ini_sec_t *cfg)
|
|||
EMC(EMC_SCRATCH0) = 0;
|
||||
|
||||
// Hold USBD in reset for SoC state validation on sleep.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEVICES_L) |= 0x400000;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_USBD);
|
||||
|
||||
// Flush cache and disable MMU.
|
||||
bpmp_mmu_disable();
|
||||
|
|
|
|||
Loading…
Reference in a new issue