diff --git a/bdk/mem/smmu.c b/bdk/mem/smmu.c
index 8bc9aac..6e2b7e8 100644
--- a/bdk/mem/smmu.c
+++ b/bdk/mem/smmu.c
@@ -1,7 +1,7 @@
 /*
  * Copyright (c) 2018 naehrwert
  * Copyright (c) 2018 balika011
- * Copyright (c) 2018-2022 CTCaer
+ * Copyright (c) 2018-2024 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -94,7 +94,7 @@ void smmu_enable()
 	if (smmu_used)
 		return;
 
-	ccplex_boot_cpu0((u32)smmu_payload);
+	ccplex_boot_cpu0((u32)smmu_payload, true);
 	smmu_used = true;
 	msleep(150);
 
diff --git a/bdk/soc/ccplex.c b/bdk/soc/ccplex.c
index 37ce73d..d8e315a 100644
--- a/bdk/soc/ccplex.c
+++ b/bdk/soc/ccplex.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (c) 2018 naehrwert
- * Copyright (c) 2018-2022 CTCaer
+ * Copyright (c) 2018-2024 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -27,7 +27,9 @@
 #include <power/max77812.h>
 #include <utils/util.h>
 
-void _ccplex_enable_power_t210()
+#define CCPLEX_FLOWCTRL_POWERGATING 0
+
+static void _ccplex_enable_power_t210()
 {
 	// Configure GPIO5 and enable output in order to power CPU pmic.
 	max77620_config_gpio(5, MAX77620_GPIO_OUTPUT_ENABLE);
@@ -37,19 +39,31 @@ void _ccplex_enable_power_t210()
 	// 1.0.0-3.x: MAX77621_T_JUNCTION_120 | MAX77621_CKKADV_TRIP_DISABLE | MAX77621_INDUCTOR_NOMINAL.
 	max77621_config_default(REGULATOR_CPU0, MAX77621_CTRL_HOS_CFG);
 
-	// Set voltage and enable cores power.
+	// Set voltage and enable cluster power.
 	max7762x_regulator_set_voltage(REGULATOR_CPU0, 950000);
 	max7762x_regulator_enable(REGULATOR_CPU0, true);
 }
 
-void _ccplex_enable_power_t210b01()
+static void _ccplex_enable_power_t210b01()
 {
-	// Set voltage and enable cores power.
+	// Set voltage and enable cluster power.
 	max7762x_regulator_set_voltage(REGULATOR_CPU1, 800000);
 	max7762x_regulator_enable(REGULATOR_CPU1, true);
 }
 
-void ccplex_boot_cpu0(u32 entry)
+static void _ccplex_disable_power()
+{
+	// Disable cluster power.
+	if (hw_get_chip_id() == GP_HIDREV_MAJOR_T210)
+	{
+		max7762x_regulator_enable(REGULATOR_CPU0, false);
+		i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO5, 0);
+	}
+	else
+		max7762x_regulator_enable(REGULATOR_CPU1, false);
+}
+
+void ccplex_boot_cpu0(u32 entry, bool lock)
 {
 	// Set ACTIVE_CLUSER to FAST.
 	FLOW_CTLR(FLOW_CTLR_BPMP_CLUSTER_CONTROL) &= ~CLUSTER_CTRL_ACTIVE_SLOW;
@@ -62,12 +76,12 @@ void ccplex_boot_cpu0(u32 entry)
 	clock_enable_pllx();
 
 	// Configure MSELECT source and enable clock to 102MHz.
-	CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_MSELECT) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_MSELECT) & 0x1FFFFF00) | 6;
+	CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_MSELECT) = 6;
 	CLOCK(CLK_RST_CONTROLLER_CLK_ENB_V_SET)      = BIT(CLK_V_MSELECT);
 
 	// Configure initial CPU clock frequency and enable clock.
 	CLOCK(CLK_RST_CONTROLLER_CCLK_BURST_POLICY)  = 0x20008888; // PLLX_OUT0_LJ.
-	CLOCK(CLK_RST_CONTROLLER_SUPER_CCLK_DIVIDER) = 0x80000000;
+	CLOCK(CLK_RST_CONTROLLER_SUPER_CCLK_DIVIDER) = BIT(31);    // SUPER_CDIV_ENB.
 	CLOCK(CLK_RST_CONTROLLER_CLK_ENB_V_SET)      = BIT(CLK_V_CPUG);
 
 	clock_enable_coresight();
@@ -90,12 +104,15 @@ void ccplex_boot_cpu0(u32 entry)
 	EXCP_VEC(EVP_CPU_RESET_VECTOR) = 0;
 
 	// Set reset vector.
-	SB(SB_AA64_RESET_LOW) = entry | SB_AA64_RST_AARCH64_MODE_EN;
+	SB(SB_AA64_RESET_LOW)  = entry | SB_AA64_RST_AARCH64_MODE_EN;
 	SB(SB_AA64_RESET_HIGH) = 0;
 
 	// Non-secure reset vector write disable.
-	SB(SB_CSR) = SB_CSR_NS_RST_VEC_WR_DIS;
-	(void)SB(SB_CSR);
+	if (lock)
+	{
+		SB(SB_CSR) = SB_CSR_NS_RST_VEC_WR_DIS;
+		(void)SB(SB_CSR);
+	}
 
 	// Tighten up the security aperture.
 	// MC(MC_TZ_SECURITY_CTRL) = 1;
@@ -103,8 +120,46 @@ void ccplex_boot_cpu0(u32 entry)
 	// Clear MSELECT reset.
 	CLOCK(CLK_RST_CONTROLLER_RST_DEV_V_CLR)      = BIT(CLK_V_MSELECT);
 	// Clear NONCPU reset.
-	CLOCK(CLK_RST_CONTROLLER_RST_CPUG_CMPLX_CLR) = 0x20000000;
+	CLOCK(CLK_RST_CONTROLLER_RST_CPUG_CMPLX_CLR) = BIT(29); // CLR_NONCPURESET.
 	// Clear CPU0 reset.
 	// < 5.x: 0x411F000F, Clear CPU{0,1,2,3} POR and CORE, CX0, L2, and DBG reset.
-	CLOCK(CLK_RST_CONTROLLER_RST_CPUG_CMPLX_CLR) = 0x41010001;
+	CLOCK(CLK_RST_CONTROLLER_RST_CPUG_CMPLX_CLR) = BIT(30) | BIT(24) | BIT(16) | BIT(0);
+}
+
+void ccplex_powergate_cpu0()
+{
+#if CCPLEX_FLOWCTRL_POWERGATING
+	// Halt CPU0.
+	FLOW_CTLR(FLOW_CTLR_HALT_CPU0_EVENTS) = HALT_MODE_STOP_UNTIL_IRQ;
+
+	// Powergate cluster via flow control without waiting for WFI.
+	FLOW_CTLR(FLOW_CTLR_CPU0_CSR) = CSR_INTR_FLAG | CSR_EVENT_FLAG | CSR_ENABLE_EXT_CPU_RAIL | CSR_WAIT_WFI_NONE | CSR_ENABLE;
+
+	// Wait for the rail power off to finish.
+	while((FLOW_CTLR(FLOW_CTLR_CPU_PWR_CSR) & CPU_PWR_RAIL_STS_MASK) != CPU_PWR_RAIL_OFF);
+
+	// Set CPU0 to waitevent.
+	FLOW_CTLR(FLOW_CTLR_HALT_CPU0_EVENTS) = HALT_MODE_WAITEVENT;
+#endif
+
+	// Set CPU0 POR and CORE, CX0, L2, and DBG reset.
+	CLOCK(CLK_RST_CONTROLLER_RST_CPUG_CMPLX_SET) = BIT(30) | BIT(24) | BIT(16) | BIT(0);
+	// Set NONCPU reset.
+	CLOCK(CLK_RST_CONTROLLER_RST_CPUG_CMPLX_SET) = BIT(29);
+	// Set MSELECT reset.
+	CLOCK(CLK_RST_CONTROLLER_RST_DEV_V_SET) = BIT(CLK_V_MSELECT);
+
+	// Disable CE0.
+	pmc_enable_partition(POWER_RAIL_CE0,   DISABLE);
+	// Disable cluster 0 non-CPU.
+	pmc_enable_partition(POWER_RAIL_C0NC,  DISABLE);
+	// Disable CPU rail.
+	pmc_enable_partition(POWER_RAIL_CRAIL, DISABLE);
+
+	clock_disable_coresight();
+
+	// Clear out MSELECT and CPU clocks.
+	CLOCK(CLK_RST_CONTROLLER_CLK_ENB_V_CLR) = BIT(CLK_V_MSELECT) | BIT(CLK_V_CPUG);
+
+	_ccplex_disable_power();
 }
diff --git a/bdk/soc/ccplex.h b/bdk/soc/ccplex.h
index fb5be92..496da43 100644
--- a/bdk/soc/ccplex.h
+++ b/bdk/soc/ccplex.h
@@ -19,6 +19,7 @@
 
 #include <utils/types.h>
 
-void ccplex_boot_cpu0(u32 entry);
+void ccplex_boot_cpu0(u32 entry, bool lock);
+void ccplex_powergate_cpu0();
 
 #endif