1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-12-23 16:36:03 +00:00
Commit graph

52 commits

Author SHA1 Message Date
CTCaer
678e8d34e3 Bump hekate to v5.5.5 and Nyx to v1.0.2 2021-04-11 15:02:35 +03:00
CTCaer
46038032a4 bdk: make sure that boot storage has the correct size 2021-03-17 09:23:13 +02:00
CTCaer
0e40fef049 Modernize hekate_ipl.ini once again.
Additionally explain in **explicit words** that stock option disables CFW kips.
2021-01-14 19:24:56 +02:00
CTCaer
4a152504cb Bump hekate to v5.5.0 and Nyx to v0.9.6 2020-12-02 22:34:54 +02:00
CTCaer
0a9931ddb3 exo: Add exosphere fatal binary support for Mariko
Can be overriden with `exofatal={SD path}`.
2020-12-02 01:41:23 +02:00
CTCaer
dae7be8ec4 nyx: Allow disabling of Joycon
Setting `jcdisable=1` in nyx.ini disables the usage of Joycon completely.

This also disables the BT pairing data dumping tool.
2020-10-20 10:21:48 +03:00
CTCaer
2f5b52223c config: Add bootloader protection
`bootprotect=1` enables protection of the `bootloader` folder inside HOS.

This disallows any reading/writing of the folder and its contents inside HOS, preventing any corruption of it.

This of course has the side-effect of homebrew that depend on it (e.g. hekate Toolbox) to not work fully.
2020-10-20 10:16:12 +03:00
CTCaer
2ca4fb6d8f Correct readme about UMS on boot 2020-09-07 00:10:23 +03:00
CTCaer
fa72d1154d Update readme to include the UMS autoboot 2020-06-14 01:02:47 +03:00
CTCaer
a91378b9c1 nyx: Allow always writeable emmc via config
The key is `umsemmcrw` and resides in nyx.ini
2020-05-05 19:26:10 +03:00
CTCaer
4d1b59c05b Update Readme 2020-04-30 16:33:14 +03:00
CTCaer
2a74715c3c Update some copyrights 2020-04-30 14:10:08 +03:00
CTCaer
4160037c81 emummc: Add boot entry emuMMC selection
Using the key `emupath` on a boot entry will load the selected emuMMC.
This can also be forced by using the correct boot cfg storage bit and writing the path at the emummc path offset. Check readme for these.

This can only be used if the emuMMC was created via Nyx. because of the raw_based and file_based files that have emuMMC info.
(emupath=emuMMC/RAW1, emupath=emuMMC/SD00, etc)
2020-04-27 09:30:53 +03:00
CTCaer
8abda7f259 fss0: Support experimental content
Use key `fss0experimental=1` in a boot entry with `fss0=` defined to enable experimental content.

(Older versions of hekate will just skip any experimental content.)
2020-03-09 08:58:12 +02:00
CTCaer
8584493c7f sept: Add support for loading sept from fss0
If `fss0=` key is detected, sept will be loaded from fusee-secondary.bin instead of `sept/sept_*`.

This will negate missing sept and failed to decrypt pkg2 errors, when booting HOS, for users that forget to update sept folder.
2019-12-16 00:53:22 +02:00
CTCaer
938562cc0a Add info in readme about auto updating update.bin 2019-12-12 00:23:04 +02:00
CTCaer
a664118fc7 r2p: Update r2p payload
2 modes:
- With updater2p; Forces the reboot to payload binary to be hekate
- Without; Checks if hekate and then if old
2019-12-12 00:13:32 +02:00
CTCaer
d0850516ab Bump hekate to v5.1.0 and Nyx to v0.8.3 2019-12-08 18:59:00 +02:00
CTCaer
2c1da3a97d se: Upgrade SE and allow SHA calc continue
- Allow SHA to calculate sizes > 16MB and refactor sha function
- Name various registers and magic numbers
- Fix various key access bugs

In a later commit this new design will boost verification times significantly and also allow full SHA256 hashes.
2019-12-04 17:18:16 +02:00
Kostas Missos
74452074f6 Modernize readme and hekate_ipl_template.ini
Adds more info on how the configs work.
2019-10-31 16:31:16 +02:00
Kostas Missos
598073e50c ext patches: Remove patches_template.ini load
Remove patches_template.ini load.
- It has useless patches, which some times, users confuse them for "bad" patches, even though they aren't.
- No one reads on how it works and it's constantly mishandled when there's no patches.ini (which completely overrides it).
- It was not supposed to be edited.

Also release will not include it anymore.
Template will still exist for demonstrating the syntax of `patches.ini`

This commit also corrects the patches.ini encoding note as ASCII.
2019-10-31 16:26:46 +02:00
CTCaer
6433dbd1ee
readme: Add info for id key 2019-09-14 22:06:18 +03:00
CTCaer
787c682f0f readme: Add nouserexceptions key 2019-09-10 23:44:33 +03:00
ctcaer@gmail.com
08b84384a6 Bugfixes and cleanup 2019-07-06 22:08:37 +03:00
CTCaer
d55634638f
Update banner in readme 2019-06-30 06:38:48 +03:00
ctcaer@gmail.com
7cd545a124 [Nyx] Additions to readme 2019-06-30 05:23:20 +03:00
ctcaer@gmail.com
c0b3a4fc54 Add info about Nyx/emuMMC 2019-06-30 03:57:45 +03:00
TehPsychedelic
2a2db6cb2f Added autoboot_list to README (#205)
* Added autoboot_list to README
2019-03-30 19:10:49 +02:00
CTCaer
361f8a3085
Correct byte offsets for boot cfg. Thanks @WerWolv 2019-03-21 08:45:33 +02:00
Kostas Missos
14c50ed7f8 [Stock] Add cleaner stock
[Stock]
fss0={sd path}
stock=1

Can now work for both older and new HOS versions.

- <= 6.2.0 loads nothing and removes kernel patching.
- >= 7.0.0 loads exo, wb and removes kernel patching.

This requires that fss0 {sd path} is valid. Otherwise it will fail on ini cfg parsing.

If <= 6.2.0 and no FSS0
[Stock]
stock=1

will provide a cleaner stock with no kernel patching.
2019-03-09 20:49:00 +02:00
Kostas Missos
4b78198f33 Update readme.md for the new features 2019-03-08 22:19:25 +02:00
Kostas Missos
f911fab9f2 [7.0.0-7.0.1] Add full support via Atmosphere's sept 2019-02-24 03:03:17 +02:00
Kostas Missos
2fb37db707 [Boot Config] Add HOS reboot to config
This storage allows you to reboot from HOS to the selected ini boot entry.

In the future it will be used for far more.
2019-02-24 02:43:13 +02:00
Hunter
288b5c08db Add "Silent" auto full power off option 2018-09-30 13:24:30 -04:00
Kostas Missos
1392e6eaf4 Add use of wildcard "*" for loading kips from a folder 2018-09-24 23:47:35 +03:00
Kostas Missos
67a470921a Add PWM backlight support + options
- No eye blasting backlight
- Option to choose the prefered brightness
- Smooths transitions
2018-09-19 00:01:42 +03:00
Kostas Missos
6a554eec6c Update Readme + Fix Auto Update 2018-08-23 04:27:49 +03:00
Kostas Missos
c5a6ad823e Add payload/libtools launching prerequisites 2018-08-21 04:45:19 +03:00
M4xw
8b0915cb01 Implement elfloader/module support 2018-08-07 22:41:05 +02:00
misson20000
6baeb8b4ff
Update README.md to document atmosphere option in hekate.ini 2018-08-05 22:08:17 -07:00
Rajko Stojadinovic
977ef6f150 Add KIP1 patching support (with 2 FS patches included) 2018-07-29 22:03:12 +02:00
Kostas Missos
df8e6ea57d Add hekate new style .ini template 2018-07-01 20:26:26 +03:00
Kostas Missos
f22616894c Update README and README_BOOTLOGO 2018-07-01 20:21:25 +03:00
Kostas Missos
ffeb8c60df Preliminary Exosphère support 2018-07-01 05:03:17 +03:00
Kostas Missos
0c5c827d0b Add battery/charge info + bugfixes 2018-06-28 04:05:19 +03:00
Kostas Missos
3908493cf5
Fix the accents lost in commits 2018-06-28 00:40:43 +03:00
Kostas Missos
66b6c5cdf0 Add 16px font support back 2018-06-28 00:21:05 +03:00
Kostas Missos
d2291a78e2 Switch Framebuffer to ARGB by default 2018-06-19 16:53:41 +03:00
Kostas Missos
9d50a13ef0 Update GNU copyright for big changes
Additionally change the readme
2018-06-18 09:00:53 +03:00
Kostas Missos
e2a8b36750 [PKG1] Add kernel patching
Add Disable Svc Verification and Debug mode.
Can be enabled via the hekate .ini

https://gist.github.com/roblabla/440f3ceaa0b2d3ca530c2a43fe258420
2018-06-03 22:27:15 +12:00