diff --git a/Equivalent-Commands.md b/Equivalent-Commands.md
index 6af1d43..59d2472 100644
--- a/Equivalent-Commands.md
+++ b/Equivalent-Commands.md
@@ -9,6 +9,12 @@ Disable: `echo 0 > /sys/devices/system/cpu/cpu{cpu_number}/online` where `{cpu_n
 
 NOTE: You cannot enable or disable cpu0, hence why there are only 7 in the range for 8 cpu threads.
 
+# Enable & Disable CPU SMT
+
+Enable: `echo on > /sys/devices/system/cpu/smt/control`.
+
+Disable: `echo off > /sys/devices/system/cpu/smt/control`.
+
 # Enable & Disable CPU boost
 
 Enable: `echo 1 > /sys/devices/system/cpu/cpufreq/boost` enables boost across all threads.
@@ -51,7 +57,7 @@ Read the actual fan RPM: `cat /sys/class/hwmon/hwmon5/fan1_input` gives the fan
 NOTE: There's a bug in the fan controller; if you enable automatic fan control it will forget any previously-set target despite it appearing to be set correctly (i.e. `cat /sys/class/hwmon/hwmon5/fan1_target` will display the correct value).
 When you disable automatic fan control, you will need to set the fan RPM again.
 
-# Battery stats
+# Get battery stats
 
 Get the battery charge right now: `cat /sys/class/hwmon/hwmon2/device/charge_now` gives charge in uAh (uAh * 7.7/1000000 = charge in Wh).
 
@@ -59,10 +65,22 @@ Get the maximum battery capacity: `cat /sys/class/hwmon/hwmon2/device/charge_ful
 
 Get the design battery capacity: `cat /sys/class/hwmon/hwmon2/device/charge_full_design` gives charge in uAh.
 
-Get whether the deck is plugged in: `cat /sys/class/hwmon/hwmon5/curr1_input` gives the charger current in mA.
+Get battery current: `cat /sys/class/hwmon/hwmon5/curr1_input` gives the charger current in mA.
 
 NOTE: 7.7 is the voltage of the battery -- it's not just a magic number.
 
+# Set battery charge rate
+
+Set the charge rate: `echo {rate} > /sys/class/hwmon/hwmon5/maximum_battery_charge_rate` where `{rate}` is the charge rate in mA, between 250 and 2500 mA.
+
+That file is write only, so changes cannot be directly observed.
+
+# Set battery charge mode
+
+There exists a binary which may or may not be executable (depending on which SteamOS version) which can be used to set this and other things. [More details in the issue](https://github.com/NGnius/PowerTools/issues/50).
+
+Refer to [util.rs](https://github.com/NGnius/PowerTools/blob/main/backend/src/settings/steam_deck/util.rs) for how the firmware interface works.
+
 # Steam Deck kernel patches
 
 This is how I figured out how the fan stuff works.