1
0
Fork 0
mirror of https://github.com/Atmosphere-NX/Atmosphere.git synced 2024-11-14 16:06:56 +00:00
Atmosphere/exosphere/src/start.s

257 lines
7.4 KiB
ArmAsm
Raw Normal View History

/* For some reason GAS doesn't know about it, even with .cpu cortex-a57 */
#define cpuactlr_el1 s3_1_c15_c2_0
#define cpuectlr_el1 s3_1_c15_c2_1
.macro RESET_CORE
mov x0, #(1 << 63)
msr cpuactlr_el1, x0 /* disable regional clock gating */
isb
mov x0, #3
msr rmr_el3, x0
isb
dsb sy
/* Nintendo forgot to copy-paste the branch instruction below. */
1:
wfi
b 1b
.endm
.macro ERRATUM_INVALIDATE_BTB_AT_BOOT
/* Nintendo copy-pasted https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/nvidia/tegra/common/aarch64/tegra_helpers.S#L312 */
/*
* Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/* The following comments are mine. */
/* mask all interrupts */
msr daifset, 0b1111
/*
Enable invalidates of branch target buffer, then flush
the entire instruction cache at the local level, and
with the reg change, the branch target buffer, then disable
invalidates of the branch target buffer again.
*/
mrs x0, cpuactlr_el1
orr x0, x0, #1
msr cpuactlr_el1, x0
dsb sy
isb
ic iallu
dsb sy
isb
mrs x0, cpuactlr_el1
bic x0, x0, #1
msr cpuactlr_el1, x0
.rept 7
nop /* wait long enough for the write to cpuactlr_el1 to have completed */
.endr
/* if the OS lock is set, disable it and request a warm reset */
mrs x0, oslsr_el1
ands x0, x0, #2
b.eq 2f
mov x0, xzr
msr oslar_el1, x0
RESET_CORE
.rept 65
nop /* guard against speculative excecution */
.endr
2:
/* set the OS lock */
mov x0, #1
msr oslar_el1, x0
.endm
.section .cold_crt0.text.start, "ax", %progbits
.align 6
.global __start_cold
__start_cold:
ERRATUM_INVALIDATE_BTB_AT_BOOT
2018-03-03 02:43:46 +00:00
/*
This coldboot crt0 doesn't enter the boot critical section in the official monitor.
However we'll initialize g_boot_critical_section so that it acts like core0 has entered it,
for it to be in .data and for safety.
*/
msr spsel, #0
bl get_coldboot_crt0_stack_address
mov sp, x0
2018-02-27 19:14:12 +00:00
mov fp, #0
adr x0, g_coldboot_crt0_relocation_list
mov x19, x0
adr x1, g_coldboot_crt0_main_func_list
ldr x2, =g_warmboot_crt0_main_func_list
2018-03-02 01:19:35 +00:00
bl coldboot_init
ldr x16, =__jump_to_main_cold
br x16
.section .warm_crt0.text.start, "ax", %progbits
.align 6
.global __start_warm
__start_warm:
ERRATUM_INVALIDATE_BTB_AT_BOOT
2018-03-03 02:43:46 +00:00
/* For some reasons, Nintendo uses spsel, #1 around here, causing issues if an exception occurs */
msr spsel, #0
2018-03-03 02:43:46 +00:00
/* Nintendo doesn't use anything like the following two lines, but their critical section algo is borked */
/* FWIW this function doesn't use a stack atm, with latest GCC, but that might change. */
bl get_warmboot_crt0_stack_address_critsec_enter
mov sp, x0
2018-03-11 11:53:52 +00:00
2018-03-03 02:43:46 +00:00
/* PA(__main_start__) = __warmboot_crt0_start__ + 0x800 (refer to the linker script) */
ldr x0, =g_boot_critical_section
ldr x1, =__main_start__
sub x0, x0, x1
ldr x1, =(__start_warm + 0x800)
add x0, x0, x1
bl warmboot_crt0_critical_section_enter
bl get_warmboot_crt0_stack_address
mov sp, x0
2018-02-27 19:14:12 +00:00
mov fp, #0
2018-03-02 01:19:35 +00:00
adr x0, g_warmboot_crt0_main_func_list
bl warmboot_init
ldr x16, =__jump_to_main_warm
br x16
2018-02-28 01:37:08 +00:00
/* Used by coldboot as well */
.section .warm_crt0.text.__set_memory_registers, "ax", %progbits
.align 4
2018-02-28 01:37:08 +00:00
.global __set_memory_registers
.type __set_memory_registers, %function
__set_memory_registers:
msr cpuectlr_el1, x2
2018-02-28 01:37:08 +00:00
isb
msr scr_el3, x3
msr ttbr0_el3, x0
msr tcr_el3, x4
msr cptr_el3, x5
msr mair_el3, x6
msr vbar_el3, x1
/* Invalidate the entire TLB on the Inner Shareable domain */
isb
dsb ish
tlbi alle3is
dsb ish
isb
msr sctlr_el3, x7
isb
ret
.section .text.__jump_to_main_cold, "ax", %progbits
.align 4
__jump_to_main_cold:
/* This is inspired by Nintendo's code but significantly different */
bl __set_exception_entry_stack_pointer
/*
2018-02-27 19:14:12 +00:00
Normally Nintendo calls it in crt0, but it's fine to do that here.
Please note that package2.c shouldn't have constructed objects, because we
call __libc_fini_array after load_package2 has been cleared, on EL3
to EL3 chainload.
*/
bl __libc_init_array
2018-02-27 19:14:12 +00:00
bl get_pk2ldr_stack_address
mov sp, x0
mov x0, x19
bl load_package2
mov w0, #3 /* use core3 stack temporarily */
bl get_exception_entry_stack_address
mov sp, x0
bl coldboot_main
/* If we ever return, it's to chainload an EL3 payload */
bl __libc_fini_array
/* Reset the core (only one is running on coldboot) */
RESET_CORE
.section .text.__jump_to_main_warm, "ax", %progbits
__jump_to_main_warm:
/* Nintendo doesn't do that here, causing issues if an exception occurs */
bl __set_exception_entry_stack_pointer
mov w0, #0 /* use core0,1,2 stack bottom + 0x800 (VA of warmboot crt0 sp) temporarily */
bl get_exception_entry_stack_address
add sp, x0, #0x800
2018-03-03 18:31:22 +00:00
bl warmboot_main
.section .text.__set_exception_entry_stack, "ax", %progbits
.type __set_exception_entry_stack, %function
.global __set_exception_entry_stack
__set_exception_entry_stack_pointer:
/* If SPSel == 1 on entry, make sure your function doesn't use stack variables! */
mov x16, lr
mrs x17, spsel
mrs x0, mpidr_el1
and w0, w0, #3
bl get_exception_entry_stack_address
msr spsel, #1
mov sp, x0
msr spsel, x17
mov lr, x16
ret
.section .text.__jump_to_lower_el, "ax", %progbits
.global __jump_to_lower_el
.type __jump_to_lower_el, %function
__jump_to_lower_el:
2018-03-11 11:53:52 +00:00
/* x0: arg (context ID), x1: entrypoint, w2: spsr */
mov w2, w2
2018-03-11 11:53:52 +00:00
msr elr_el3, x1
msr spsr_el3, x2
bl __set_exception_entry_stack_pointer
isb
eret
2018-03-02 01:19:35 +00:00
/* Custom stuff */
.section .cold_crt0.data.g_coldboot_crt0_relocation_list, "aw", %progbits
.align 3
2018-03-02 01:19:35 +00:00
.global g_coldboot_crt0_relocation_list
g_coldboot_crt0_relocation_list:
.quad 0, __loaded_end_lma__ /* __start_cold, to be set & loaded size */
.quad 1, 5 /* number of sections to relocate/clear before & after mmu init */
/* Relocations */
.quad __warmboot_crt0_start__, __warmboot_crt0_end__, __warmboot_crt0_lma__
.quad __main_start__, __main_bss_start__, __main_lma__
.quad __pk2ldr_start__, __pk2ldr_bss_start__, __pk2ldr_lma__
.quad __vectors_start__, __vectors_end__, __vectors_lma__
/* BSS clears */
.quad __main_bss_start__, __main_end__, 0
.quad __pk2ldr_bss_start__, __pk2ldr_end__, 0
.section .cold_crt0.data.g_coldboot_crt0_main_func_list, "aw", %progbits
.align 3
.global g_coldboot_crt0_main_func_list
g_coldboot_crt0_main_func_list:
2018-03-03 15:58:23 +00:00
.quad 4 /* Number of functions */
.quad 0 /* Target firmware, overwritten in coldboot_init. */
/* Functions */
2018-03-03 15:58:23 +00:00
.quad init_dma_controllers
.quad set_memory_registers_enable_mmu
.quad flush_dcache_all
.quad invalidate_icache_all
2018-03-02 01:19:35 +00:00
.section .warm_crt0.data.g_warmboot_crt0_main_func_list, "aw", %progbits
.align 3
2018-03-02 01:19:35 +00:00
.global g_warmboot_crt0_main_func_list
g_warmboot_crt0_main_func_list:
.space (6 * 8)