mirrors/Atmosphere
1
0
Fork 0
mirror of https://github.com/Atmosphere-NX/Atmosphere.git synced 2024-11-23 04:12:02 +00:00
Code Issues Releases Activity

Merge pull request #73 from Resaec/uart

Browse source 
Add UART register enumerators
This commit is contained in:
hexkyz 2018-06-04 16:33:43 +01:00 committed by GitHub
commit 116eb6c67c
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 119 additions and 17 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

22
exosphere/src/uart.c
View file

@ -17,37 +17,37 @@ void uart_init(UartDevice dev, uint32_t baud) {
/* Set baud rate. */
uint32_t rate = (8 * baud + 408000000) / (16 * baud);
uart->UART_LCR = 0x80; /* Enable DLAB. */
uart->UART_LCR = UART_LCR_DLAB; /* Enable DLAB. */
uart->UART_THR_DLAB = (uint8_t)rate; /* Divisor latch LSB. */
uart->UART_IER_DLAB = (uint8_t)(rate >> 8); /* Divisor latch MSB. */
uart->UART_LCR = 0; /* Diable DLAB. */
/* Setup UART in fifo mode. */
uart->UART_IER_DLAB = 0;
uart->UART_IIR_FCR = 7; /* Enable and clear TX and RX FIFOs. */
uart->UART_IIR_FCR = UART_FCR_FCR_EN_FIFO | UART_FCR_RX_CLR | UART_FCR_TX_CLR; /* Enable and clear TX and RX FIFOs. */
uart->UART_LSR;
wait(3 * ((baud + 999999) / baud));
uart->UART_LCR = 3; /* Set word length 8. */
uart->UART_LCR = UART_LCR_WD_LENGTH_8; /* Set word length 8. */
uart->UART_MCR = 0;
uart->UART_MSR = 0;
uart->UART_IRDA_CSR = 0;
uart->UART_RX_FIFO_CFG = 1;
uart->UART_RX_FIFO_CFG = 1; /* Set RX_FIFO trigger level */
uart->UART_MIE = 0;
uart->UART_ASR = 0;
}
void uart_wait_idle(UartDevice dev, uint32_t which) {
while (!(get_uart_device(dev)->UART_VENDOR_STATUS & which)) {
/* This function blocks until the UART device (dev) is in the desired state (status). Make sure the desired state can be reached! */
void uart_wait_idle(UartDevice dev, UartVendorStatus status) {
while (!(get_uart_device(dev)->UART_VENDOR_STATUS & status)) {
/* Wait */
}
}
void uart_send(UartDevice dev, const void *buf, size_t len)
{
void uart_send(UartDevice dev, const void *buf, size_t len) {
volatile uart_t *uart = get_uart_device(dev);
for (size_t i = 0; i < len; i++) {
while (uart->UART_LSR & UART_TX_FIFO_FULL) {
while (uart->UART_LSR & UART_LSR_TX_FIFO_FULL) {
/* Wait until the TX FIFO isn't full */
}
uart->UART_THR_DLAB = *((const uint8_t *)buf + i);
@ -58,9 +58,9 @@ void uart_recv(UartDevice dev, void *buf, size_t len) {
volatile uart_t *uart = get_uart_device(dev);
for (size_t i = 0; i < len; i++) {
while (uart->UART_LSR & UART_RX_FIFO_EMPTY) {
while (uart->UART_LSR & UART_LSR_RX_FIFO_EMPTY) {
/* Wait until the RX FIFO isn't empty */
}
*((uint8_t *)buf + i) = uart->UART_THR_DLAB;
*((uint8_t *)buf + i) = uart->UART_THR_DLAB;
}
}

114
exosphere/src/uart.h
View file

@ -13,6 +13,8 @@ static inline uintptr_t get_uart_base(void) {
#define UART_BASE (get_uart_base())
#define BAUD_115200 115200
/* Exosphère: add the clkreset values for UART C,D,E */
typedef enum {
UART_A = 0,
@ -22,12 +24,112 @@ typedef enum {
UART_E = 4,
} UartDevice;
#define BAUD_115200 115200
/* 36.3.12 UART_VENDOR_STATUS_0_0 */
typedef enum {
UART_VENDOR_STATE_TX_IDLE = 1 << 0,
UART_VENDOR_STATE_RX_IDLE = 1 << 1,
#define UART_TX_IDLE 0x00000001
#define UART_RX_IDLE 0x00000002
#define UART_TX_FIFO_FULL 0x100
#define UART_RX_FIFO_EMPTY 0x200
/* This bit is set to 1 when a read is issued to an empty FIFO and gets cleared on register read (sticky bit until read)
0 = NO_UNDERRUN
1 = UNDERRUN
*/
UART_VENDOR_STATE_RX_UNDERRUN = 1 << 2,
/* This bit is set to 1 when write data is issued to the TX FIFO when it is already full and gets cleared on register read (sticky bit until read)
0 = NO_OVERRUN
1 = OVERRUN
*/
UART_VENDOR_STATE_TX_OVERRUN = 1 << 3,
UART_VENDOR_STATE_RX_FIFO_COUNTER = 0b111111 << 16, /* reflects number of current entries in RX FIFO */
UART_VENDOR_STATE_TX_FIFO_COUNTER = 0b111111 << 24 /* reflects number of current entries in TX FIFO */
} UartVendorStatus;
/* 36.3.6 UART_LSR_0 */
typedef enum {
UART_LSR_RDR = 1 << 0, /* Receiver Data Ready */
UART_LSR_OVRF = 1 << 1, /* Receiver Overrun Error */
UART_LSR_PERR = 1 << 2, /* Parity Error */
UART_LSR_FERR = 1 << 3, /* Framing Error */
UART_LSR_BRK = 1 << 4, /* BREAK condition detected on line */
UART_LSR_THRE = 1 << 5, /* Transmit Holding Register is Empty -- OK to write data */
UART_LSR_TMTY = 1 << 6, /* Transmit Shift Register empty status */
UART_LSR_FIFOE = 1 << 7, /* Receive FIFO Error */
UART_LSR_TX_FIFO_FULL = 1 << 8, /* Transmitter FIFO full status */
UART_LSR_RX_FIFO_EMPTY = 1 << 9, /* Receiver FIFO empty status */
} UartLineStatus;
/* 36.3.4 UART_LCR_0 */
typedef enum {
UART_LCR_WD_LENGTH_5 = 0, /* word length 5 */
UART_LCR_WD_LENGTH_6 = 1, /* word length 6 */
UART_LCR_WD_LENGTH_7 = 2, /* word length 7 */
UART_LCR_WD_LENGTH_8 = 3, /* word length 8 */
/* STOP:
0 = Transmit 1 stop bit
1 = Transmit 2 stop bits (receiver always checks for 1 stop bit)
*/
UART_LCR_STOP = 1 << 2,
UART_LCR_PAR = 1 << 3, /* Parity enabled */
UART_LCR_EVEN = 1 << 4, /* Even parity format. There will always be an even number of 1s in the binary representation (PAR = 1) */
UART_LCR_SET_P = 1 << 5, /* Set (force) parity to value in LCR[4] */
UART_LCR_SET_B = 1 << 6, /* Set BREAK condition -- Transmitter sends all zeroes to indicate BREAK */
UART_LCR_DLAB = 1 << 7, /* Divisor Latch Access Bit (set to allow programming of the DLH, DLM Divisors) */
} UartLineControl;
/* 36.3.3 UART_IIR_FCR_0 */
typedef enum {
UART_FCR_FCR_EN_FIFO = 1 << 0, /* Enable the transmit and receive FIFOs. This bit should be enabled */
UART_FCR_RX_CLR = 1 << 1, /* Clears the contents of the receive FIFO and resets its counter logic to 0 (the receive shift register is not cleared or altered). This bit returns to 0 after clearing the FIFOs */
UART_FCR_TX_CLR = 1 << 2, /* Clears the contents of the transmit FIFO and resets its counter logic to 0 (the transmit shift register is not cleared or altered). This bit returns to 0 after clearing the FIFOs */
/* DMA:
0 = DMA_MODE_0
1 = DMA_MODE_1
*/
UART_FCR_DMA = 1 << 3,
/* TX_TRIG
0 = FIFO_COUNT_GREATER_16
1 = FIFO_COUNT_GREATER_8
2 = FIFO_COUNT_GREATER_4
3 = FIFO_COUNT_GREATER_1
*/
UART_FCR_TX_TRIG = 3 << 4,
UART_FCR_TX_TRIG_FIFO_COUNT_GREATER_16 = 0 << 4,
UART_FCR_TX_TRIG_FIFO_COUNT_GREATER_8 = 1 << 4,
UART_FCR_TX_TRIG_FIFO_COUNT_GREATER_4 = 2 << 4,
UART_FCR_TX_TRIG_FIFO_COUNT_GREATER_1 = 3 << 4,
/* RX_TRIG
0 = FIFO_COUNT_GREATER_1
1 = FIFO_COUNT_GREATER_4
2 = FIFO_COUNT_GREATER_8
3 = FIFO_COUNT_GREATER_16
*/
UART_FCR_RX_TRIG = 3 << 6,
UART_FCR_RX_TRIG_FIFO_COUNT_GREATER_1 = 0 << 6,
UART_FCR_RX_TRIG_FIFO_COUNT_GREATER_4 = 1 << 6,
UART_FCR_RX_TRIG_FIFO_COUNT_GREATER_8 = 2 << 6,
UART_FCR_RX_TRIG_FIFO_COUNT_GREATER_16 = 3 << 6,
} UartFifoControl;
/* 36.3.3 UART_IIR_FCR_0 */
typedef enum {
UART_IIR_IS_STA = 1 << 0, /* Interrupt Pending if ZERO */
UART_IIR_IS_PRI0 = 1 << 1, /* Encoded Interrupt ID Refer to IIR[3:0] table [36.3.3] */
UART_IIR_IS_PRI1 = 1 << 2, /* Encoded Interrupt ID Refer to IIR[3:0] table */
UART_IIR_IS_PRI2 = 1 << 3, /* Encoded Interrupt ID Refer to IIR[3:0] table */
/* FIFO Mode Status
0 = 16450 mode (no FIFO)
1 = 16550 mode (FIFO)
*/
UART_IIR_EN_FIFO = 3 << 6,
UART_IIR_MODE_16450 = 0 << 6,
UART_IIR_MODE_16550 = 1 << 6,
} UartInterruptIdentification;
typedef struct {
/* 0x00 */ uint32_t UART_THR_DLAB;
@ -48,7 +150,7 @@ typedef struct {
void uart_select(UartDevice dev);
void uart_init(UartDevice dev, uint32_t baud);
void uart_wait_idle(UartDevice dev, uint32_t which);
void uart_wait_idle(UartDevice dev, UartVendorStatus status);
void uart_send(UartDevice dev, const void *buf, size_t len);
void uart_recv(UartDevice dev, void *buf, size_t len);