mirror of
https://github.com/Atmosphere-NX/Atmosphere.git
synced 2024-12-22 18:32:05 +00:00
fusee: minor hwinit fixes
This commit is contained in:
parent
f6833a794a
commit
4b09b5d5ce
1 changed files with 56 additions and 69 deletions
|
@ -15,7 +15,7 @@
|
|||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
|
||||
#include "hwinit.h"
|
||||
#include "apb_misc.h"
|
||||
#include "car.h"
|
||||
|
@ -42,12 +42,12 @@ static bool is_soc_mariko() {
|
|||
static void config_oscillators(void) {
|
||||
volatile tegra_car_t *car = car_get_regs();
|
||||
volatile tegra_pmc_t *pmc = pmc_get_regs();
|
||||
|
||||
|
||||
car->spare_reg0 = ((car->spare_reg0 & 0xFFFFFFF3) | 4);
|
||||
|
||||
|
||||
SYSCTR0_CNTFID0_0 = 19200000;
|
||||
TIMERUS_USEC_CFG_0 = 0x45F;
|
||||
|
||||
|
||||
car->osc_ctrl = 0x50000071;
|
||||
pmc->osc_edpd_over = ((pmc->osc_edpd_over & 0xFFFFFF81) | 0xE);
|
||||
pmc->osc_edpd_over = ((pmc->osc_edpd_over & 0xFFBFFFFF) | 0x400000);
|
||||
|
@ -63,37 +63,21 @@ static void config_oscillators(void) {
|
|||
|
||||
static void config_gpios(void) {
|
||||
volatile tegra_pinmux_t *pinmux = pinmux_get_regs();
|
||||
bool is_mariko = is_soc_mariko();
|
||||
|
||||
if (is_mariko) {
|
||||
uint32_t hardware_type = fuse_get_hardware_type();
|
||||
|
||||
/* Only for HardwareType_Iowa and HardwareType_Five. */
|
||||
if ((hardware_type == 3) || (hardware_type == 5)) {
|
||||
pinmux->uart2_tx = 0;
|
||||
pinmux->uart3_tx = 0;
|
||||
gpio_configure_mode(TEGRA_GPIO(G, 0), GPIO_MODE_GPIO);
|
||||
gpio_configure_mode(TEGRA_GPIO(D, 1), GPIO_MODE_GPIO);
|
||||
gpio_configure_direction(TEGRA_GPIO(G, 0), GPIO_DIRECTION_INPUT);
|
||||
gpio_configure_direction(TEGRA_GPIO(D, 1), GPIO_DIRECTION_INPUT);
|
||||
}
|
||||
} else {
|
||||
|
||||
/* NOTE: This is also not done for calcio/copper. */
|
||||
if (fuse_get_hardware_type() != 2) {
|
||||
pinmux->uart2_tx = 0;
|
||||
pinmux->uart3_tx = 0;
|
||||
}
|
||||
|
||||
pinmux->pe6 = PINMUX_INPUT;
|
||||
pinmux->ph6 = PINMUX_INPUT;
|
||||
if (!is_mariko) {
|
||||
gpio_configure_mode(TEGRA_GPIO(G, 0), GPIO_MODE_GPIO);
|
||||
gpio_configure_mode(TEGRA_GPIO(D, 1), GPIO_MODE_GPIO);
|
||||
}
|
||||
gpio_configure_mode(TEGRA_GPIO(E, 6), GPIO_MODE_GPIO);
|
||||
gpio_configure_mode(TEGRA_GPIO(H, 6), GPIO_MODE_GPIO);
|
||||
if (!is_mariko) {
|
||||
gpio_configure_direction(TEGRA_GPIO(G, 0), GPIO_DIRECTION_INPUT);
|
||||
gpio_configure_direction(TEGRA_GPIO(D, 1), GPIO_DIRECTION_INPUT);
|
||||
}
|
||||
|
||||
pinmux->pe6 = PINMUX_INPUT;
|
||||
pinmux->ph6 = PINMUX_INPUT;
|
||||
gpio_configure_mode(TEGRA_GPIO(E, 6), GPIO_MODE_GPIO);
|
||||
gpio_configure_mode(TEGRA_GPIO(H, 6), GPIO_MODE_GPIO);
|
||||
gpio_configure_direction(TEGRA_GPIO(E, 6), GPIO_DIRECTION_INPUT);
|
||||
gpio_configure_direction(TEGRA_GPIO(H, 6), GPIO_DIRECTION_INPUT);
|
||||
|
||||
|
@ -106,17 +90,15 @@ static void config_gpios(void) {
|
|||
gpio_configure_mode(GPIO_BUTTON_VOL_DOWN, GPIO_MODE_GPIO);
|
||||
gpio_configure_direction(GPIO_BUTTON_VOL_UP, GPIO_DIRECTION_INPUT);
|
||||
gpio_configure_direction(GPIO_BUTTON_VOL_DOWN, GPIO_DIRECTION_INPUT);
|
||||
|
||||
if (is_mariko) {
|
||||
/* Configure home button as input. */
|
||||
gpio_configure_mode(TEGRA_GPIO(Y, 1), GPIO_MODE_GPIO);
|
||||
gpio_configure_direction(TEGRA_GPIO(Y, 1), GPIO_DIRECTION_INPUT);
|
||||
}
|
||||
|
||||
/* Configure home button as input. */
|
||||
gpio_configure_mode(TEGRA_GPIO(Y, 1), GPIO_MODE_GPIO);
|
||||
gpio_configure_direction(TEGRA_GPIO(Y, 1), GPIO_DIRECTION_INPUT);
|
||||
}
|
||||
|
||||
static void mbist_workaround(void) {
|
||||
volatile tegra_car_t *car = car_get_regs();
|
||||
|
||||
|
||||
car->clk_source_sor1 = ((car->clk_source_sor1 | 0x8000) & 0xFFFFBFFF);
|
||||
car->plld_base |= 0x40800000u;
|
||||
car->rst_dev_y_clr = 0x40;
|
||||
|
@ -135,7 +117,7 @@ static void mbist_workaround(void) {
|
|||
MAKE_I2S_REG(0x388) &= 0xFFFFFFFE;
|
||||
MAKE_I2S_REG(0x4A0) |= 0x400;
|
||||
MAKE_I2S_REG(0x488) &= 0xFFFFFFFE;
|
||||
|
||||
|
||||
MAKE_DI_REG(DC_COM_DSC_TOP_CTL) |= 4;
|
||||
MAKE_VIC_REG(0x8C) = 0xFFFFFFFF;
|
||||
udelay(2);
|
||||
|
@ -144,7 +126,7 @@ static void mbist_workaround(void) {
|
|||
car->rst_dev_y_set = 0x40;
|
||||
car->rst_dev_l_set = 0x18000000;
|
||||
car->rst_dev_x_set = 0x40000;
|
||||
|
||||
|
||||
/* Clock out enables. */
|
||||
car->clk_out_enb_h = 0xC0;
|
||||
car->clk_out_enb_l = 0x80000130;
|
||||
|
@ -153,14 +135,14 @@ static void mbist_workaround(void) {
|
|||
car->clk_out_enb_w = 0x402000FC;
|
||||
car->clk_out_enb_x = 0x23000780;
|
||||
car->clk_out_enb_y = 0x300;
|
||||
|
||||
|
||||
/* LVL2 clock gate overrides. */
|
||||
car->lvl2_clk_gate_ovra = 0;
|
||||
car->lvl2_clk_gate_ovrb = 0;
|
||||
car->lvl2_clk_gate_ovrc = 0;
|
||||
car->lvl2_clk_gate_ovrd = 0;
|
||||
car->lvl2_clk_gate_ovre = 0;
|
||||
|
||||
|
||||
/* Configure clock sources. */
|
||||
car->plld_base &= 0x1F7FFFFF;
|
||||
car->clk_source_sor1 &= 0xFFFF3FFF;
|
||||
|
@ -173,23 +155,23 @@ static void config_se_brom(void) {
|
|||
volatile tegra_fuse_chip_common_t *fuse_chip = fuse_chip_common_get_regs();
|
||||
volatile tegra_se_t *se = se_get_regs();
|
||||
volatile tegra_pmc_t *pmc = pmc_get_regs();
|
||||
|
||||
|
||||
/* Bootrom part we skipped. */
|
||||
uint32_t sbk[4] = {fuse_chip->FUSE_PRIVATE_KEY[0], fuse_chip->FUSE_PRIVATE_KEY[1], fuse_chip->FUSE_PRIVATE_KEY[2], fuse_chip->FUSE_PRIVATE_KEY[3]};
|
||||
set_aes_keyslot(0xE, sbk, 0x10);
|
||||
|
||||
|
||||
/* Lock SBK from being read. */
|
||||
se->SE_CRYPTO_KEYTABLE_ACCESS[0xE] = 0x7E;
|
||||
|
||||
|
||||
/* This memset needs to happen here, else TZRAM will behave weirdly later on. */
|
||||
memset((void *)0x7C010000, 0, 0x10000);
|
||||
|
||||
|
||||
pmc->crypto_op = 0;
|
||||
se->SE_INT_STATUS = 0x1F;
|
||||
|
||||
|
||||
/* Lock SSK (although it's not set and unused anyways). */
|
||||
se->SE_CRYPTO_KEYTABLE_ACCESS[0xF] = 0x7E;
|
||||
|
||||
|
||||
/* Clear the boot reason to avoid problems later */
|
||||
pmc->scratch200 = 0;
|
||||
pmc->rst_status = 0;
|
||||
|
@ -199,18 +181,18 @@ void nx_hwinit(bool enable_log) {
|
|||
volatile tegra_pmc_t *pmc = pmc_get_regs();
|
||||
volatile tegra_car_t *car = car_get_regs();
|
||||
bool is_mariko = is_soc_mariko();
|
||||
|
||||
|
||||
if (!is_mariko) {
|
||||
/* Bootrom stuff we skipped by going through RCM. */
|
||||
config_se_brom();
|
||||
|
||||
|
||||
AHB_AHB_SPARE_REG_0 &= 0xFFFFFF9F;
|
||||
pmc->scratch49 = (((pmc->scratch49 >> 1) << 1) & 0xFFFFFFFD);
|
||||
|
||||
|
||||
/* Apply the memory built-in self test workaround. */
|
||||
mbist_workaround();
|
||||
}
|
||||
|
||||
|
||||
/* Enable SE clock. */
|
||||
clkrst_reboot(CARDEVICE_SE);
|
||||
if (is_mariko) {
|
||||
|
@ -228,10 +210,10 @@ void nx_hwinit(bool enable_log) {
|
|||
|
||||
/* Configure oscillators. */
|
||||
config_oscillators();
|
||||
|
||||
|
||||
/* Disable pinmux tristate input clamping. */
|
||||
APB_MISC_PP_PINMUX_GLOBAL_0 = 0;
|
||||
|
||||
|
||||
/* Configure GPIOs. */
|
||||
config_gpios();
|
||||
|
||||
|
@ -240,22 +222,22 @@ void nx_hwinit(bool enable_log) {
|
|||
clkrst_reboot(CARDEVICE_UARTA);
|
||||
uart_init(UART_A, 115200);
|
||||
}
|
||||
|
||||
/* Enable CL-DVFS clock. */
|
||||
|
||||
/* Enable CL-DVFS clock. */
|
||||
clkrst_reboot(CARDEVICE_CL_DVFS);
|
||||
|
||||
|
||||
/* Enable I2C1 clock. */
|
||||
clkrst_reboot(CARDEVICE_I2C1);
|
||||
|
||||
|
||||
/* Enable I2C5 clock. */
|
||||
clkrst_reboot(CARDEVICE_I2C5);
|
||||
|
||||
|
||||
/* Enable TZRAM clock. */
|
||||
clkrst_reboot(CARDEVICE_TZRAM);
|
||||
|
||||
/* Initialize I2C5. */
|
||||
i2c_init(I2C_5);
|
||||
|
||||
|
||||
/* Configure the PMIC. */
|
||||
if (is_mariko) {
|
||||
uint8_t val = 0x40;
|
||||
|
@ -283,11 +265,11 @@ void nx_hwinit(bool enable_log) {
|
|||
i2c_send(I2C_5, MAX77620_PWR_I2C_ADDR, MAX77620_REG_FPS_SD1, &val, 1);
|
||||
val = 0x1B;
|
||||
i2c_send(I2C_5, MAX77620_PWR_I2C_ADDR, MAX77620_REG_FPS_SD3, &val, 1);
|
||||
|
||||
|
||||
/* NOTE: [3.0.0+] This was added. */
|
||||
val = 0x22;
|
||||
i2c_send(I2C_5, MAX77620_PWR_I2C_ADDR, MAX77620_REG_FPS_GPIO3, &val, 1);
|
||||
|
||||
|
||||
/* TODO: In 3.x+, if the unit is SDEV, the MBLPD bit is set. */
|
||||
/*
|
||||
i2c_query(I2C_5, MAX77620_PWR_I2C_ADDR, MAX77620_REG_CNFGGLBL1, &val, 1);
|
||||
|
@ -296,32 +278,37 @@ void nx_hwinit(bool enable_log) {
|
|||
*/
|
||||
}
|
||||
|
||||
/* Configure SD0 voltage. */
|
||||
uint8_t val = 0x24;
|
||||
i2c_send(I2C_5, MAX77620_PWR_I2C_ADDR, MAX77620_REG_SD0, &val, 1);
|
||||
|
||||
/* Configure SD0 voltage as 1.125v for erista, 1.050v for mariko. */
|
||||
if (is_mariko) {
|
||||
uint8_t val = 0x24;
|
||||
i2c_send(I2C_5, MAX77620_PWR_I2C_ADDR, MAX77620_REG_SD0, &val, 1);
|
||||
} else {
|
||||
uint8_t val = 0x2A;
|
||||
i2c_send(I2C_5, MAX77620_PWR_I2C_ADDR, MAX77620_REG_SD0, &val, 1);
|
||||
}
|
||||
|
||||
/* Enable LDO8 in HardwareType_Hoag only. */
|
||||
if (is_mariko && (fuse_get_hardware_type() == 2)) {
|
||||
val = 0xE8;
|
||||
if (fuse_get_hardware_type() == 2) {
|
||||
uint8_t val = 0xE8;
|
||||
i2c_send(I2C_5, MAX77620_PWR_I2C_ADDR, MAX77620_REG_LDO8_CFG, &val, 1);
|
||||
}
|
||||
|
||||
|
||||
/* Initialize I2C1. */
|
||||
i2c_init(I2C_1);
|
||||
|
||||
/* Set super clock burst policy. */
|
||||
car->sclk_brst_pol = ((car->sclk_brst_pol & 0xFFFF8888) | 0x3333);
|
||||
|
||||
|
||||
if (is_mariko) {
|
||||
/* Mariko only PMC configuration for TZRAM. */
|
||||
pmc->tzram_pwr_cntrl &= 0xFFFFFFFE;
|
||||
pmc->tzram_non_sec_disable = 0x3;
|
||||
pmc->tzram_sec_disable = 0x3;
|
||||
}
|
||||
|
||||
|
||||
/* Save SDRAM parameters to scratch. */
|
||||
sdram_save_params(sdram_get_params(fuse_get_dram_id()));
|
||||
|
||||
|
||||
/* Initialize SDRAM. */
|
||||
sdram_init();
|
||||
}
|
Loading…
Reference in a new issue