1
0
Fork 0
mirror of https://github.com/Atmosphere-NX/Atmosphere.git synced 2024-12-18 16:32:05 +00:00

adding UartFifoControl and UartInterruptIdentification for the UART_IIR_FCR_0 register

adding reference manual intem numbers for register enums
This commit is contained in:
Resaec 2018-04-28 00:58:42 +02:00
parent b6b0073178
commit 5dcf2cb319
2 changed files with 57 additions and 1 deletions
exosphere/src

View file

@ -24,7 +24,7 @@ void uart_init(UartDevice dev, uint32_t baud) {
/* Setup UART in fifo mode. */
uart->UART_IER_DLAB = 0;
uart->UART_IIR_FCR = 7; /* Enable and clear TX and RX FIFOs. */
uart->UART_IIR_FCR = UART_FCR_FCR_EN_FIFO | UART_FCR_RX_CLR | UART_FCR_TX_CLR; /* Enable and clear TX and RX FIFOs. */
uart->UART_LSR;
wait(3 * ((baud + 999999) / baud));
uart->UART_LCR = UART_LCR_WD_LENGTH_8; /* Set word length 8. */

View file

@ -24,6 +24,7 @@ typedef enum {
UART_E = 4,
} UartDevice;
/* 36.3.12 UART_VENDOR_STATUS_0_0 */
typedef enum {
UART_TX_IDLE = 1 << 0,
UART_RX_IDLE = 1 << 1,
@ -44,6 +45,7 @@ typedef enum {
TX_FIFO_COUNTER = 0b111111 << 24 /* reflects number of current entries in TX FIFO */
} UartVendorStatus;
/* 36.3.6 UART_LSR_0 */
typedef enum {
UART_LSR_RDR = 1 << 0, /* Receiver Data Ready */
UART_LSR_OVRF = 1 << 1, /* Receiver Overrun Error */
@ -57,6 +59,7 @@ typedef enum {
UART_LSR_RX_FIFO_EMPTY = 1 << 9, /* Receiver FIFO empty status */
} UartLineStatus;
/* 36.3.4 UART_LCR_0 */
typedef enum {
UART_LCR_WD_LENGTH_5 = 0, /* word length 5 */
UART_LCR_WD_LENGTH_6 = 1, /* word length 6 */
@ -75,6 +78,59 @@ typedef enum {
UART_LCR_DLAB = 1 << 7, /* Divisor Latch Access Bit (set to allow programming of the DLH, DLM Divisors) */
} UartLineControl;
/* 36.3.3 UART_IIR_FCR_0 */
typedef enum {
UART_FCR_FCR_EN_FIFO = 1 << 0, /* Enable the transmit and receive FIFOs. This bit should be enabled */
UART_FCR_RX_CLR = 1 << 1, /* Clears the contents of the receive FIFO and resets its counter logic to 0 (the receive shift register is not cleared or altered). This bit returns to 0 after clearing the FIFOs */
UART_FCR_TX_CLR = 1 << 2, /* Clears the contents of the transmit FIFO and resets its counter logic to 0 (the transmit shift register is not cleared or altered). This bit returns to 0 after clearing the FIFOs */
/* DMA:
0 = DMA_MODE_0
1 = DMA_MODE_1
*/
UART_FCR_DMA = 1 << 3,
/* TX_TRIG
0 = FIFO_COUNT_GREATER_16
1 = FIFO_COUNT_GREATER_8
2 = FIFO_COUNT_GREATER_4
3 = FIFO_COUNT_GREATER_1
*/
UART_FCR_TX_TRIG = 3 << 4,
UART_FCR_TX_TRIG_FIFO_COUNT_GREATER_16 = 0 << 4,
UART_FCR_TX_TRIG_FIFO_COUNT_GREATER_8 = 1 << 4,
UART_FCR_TX_TRIG_FIFO_COUNT_GREATER_4 = 2 << 4,
UART_FCR_TX_TRIG_FIFO_COUNT_GREATER_1 = 3 << 4,
/* RX_TRIG
0 = FIFO_COUNT_GREATER_1
1 = FIFO_COUNT_GREATER_4
2 = FIFO_COUNT_GREATER_8
3 = FIFO_COUNT_GREATER_16
*/
UART_FCR_RX_TRIG = 3 << 6,
UART_FCR_RX_TRIG_FIFO_COUNT_GREATER_1 = 0 << 6,
UART_FCR_RX_TRIG_FIFO_COUNT_GREATER_4 = 1 << 6,
UART_FCR_RX_TRIG_FIFO_COUNT_GREATER_8 = 2 << 6,
UART_FCR_RX_TRIG_FIFO_COUNT_GREATER_16 = 3 << 6,
} UartFifoControl;
/* 36.3.3 UART_IIR_FCR_0 */
typedef enum {
UART_IIR_IS_STA = 1 << 0, /* Interrupt Pending if ZERO */
UART_IIR_IS_PRI0 = 1 << 1, /* Encoded Interrupt ID Refer to IIR[3:0] table [36.3.3] */
UART_IIR_IS_PRI1 = 1 << 2, /* Encoded Interrupt ID Refer to IIR[3:0] table */
UART_IIR_IS_PRI2 = 1 << 3, /* Encoded Interrupt ID Refer to IIR[3:0] table */
/* FIFO Mode Status
0 = 16450 mode (no FIFO)
1 = 16550 mode (FIFO)
*/
UART_IIR_EN_FIFO = 3 << 6,
UART_IIR_MODE_16450 = 0 << 6,
UART_IIR_MODE_16550 = 1 << 6,
} UartInterruptIdentification;
typedef struct {
/* 0x00 */ uint32_t UART_THR_DLAB;
/* 0x04 */ uint32_t UART_IER_DLAB;