Refactor nxboot package2 reading, work around sdmmc issue, other changes

fusee/fusee-secondary/src/key_derivation.c

@@ -155,8 +155,7 @@ int derive_nx_keydata(uint32_t target_firmware, const nx_keyblob_t *keyblobs, ui
     }
 
     /* Setup master key revision, derive older master keys for use. */
-    mkey_detect_revision();
-    return 0;
+    return mkey_detect_revision();
 }
 
 /* Sets final keyslot flags, for handover to TZ/Exosphere. Setting these will prevent the BPMP from using the device key or master key. */

fusee/fusee-secondary/src/masterkey.c

@@ -43,7 +43,7 @@ bool check_mkey_revision(unsigned int revision) {
     return true;
 }
 
-void mkey_detect_revision(void) {
+int mkey_detect_revision(void) {
     if (g_determined_mkey_revision) {
         generic_panic();
     }
@@ -58,8 +58,9 @@ void mkey_detect_revision(void) {
     
     /* We must have determined the master key, or we're not running on a Switch. */
     if (!g_determined_mkey_revision) {
-        /* Panic in bright red. */
-        panic(0x00F00060);
+        return -1;
+    } else {
+        return 0;
     }
 }
 

fusee/fusee-secondary/src/masterkey.h

@@ -15,7 +15,7 @@
 #define MASTERKEY_NUM_NEW_DEVICE_KEYS (MASTERKEY_REVISION_MAX - MASTERKEY_REVISION_400_410)
 
 /* This should be called during initialization. */
-void mkey_detect_revision(void);
+int mkey_detect_revision(void);
 
 unsigned int mkey_get_revision(void);
 

fusee/fusee-secondary/src/nxboot.c

@@ -34,7 +34,7 @@ static void nxboot_configure_exosphere(void) {
     exosphere_config_t exo_cfg = {0};
 
     exo_cfg.magic = MAGIC_EXOSPHERE_BOOTCONFIG;
-    exo_cfg.target_firmware = EXOSPHERE_TARGET_FIRMWARE_MAX;
+    exo_cfg.target_firmware = 0;
 
     if (ini_parse_string(get_loader_ctx()->bct0, exosphere_ini_handler, &exo_cfg) < 0) {
         printf("Error: Failed to parse BCT.ini!\n");
@@ -82,7 +82,7 @@ void nxboot_main(void) {
     package1_header_t *package1;
     size_t package1_size;
     uint32_t available_revision;
-    FILE *boot0;
+    FILE *boot0, *pk2file;
     void *exosphere_memaddr;
 
     /* TODO: How should we deal with bootconfig? */
@@ -94,53 +94,55 @@ void nxboot_main(void) {
 
     /* Read Package2 from a file, otherwise from its partition(s). */
     if (loader_ctx->package2_path[0] != '\0') {
-        package2_size = get_file_size(loader_ctx->package2_path);
-        if (package2_size == 0) {
-            printf("Error: Could not read Package2 from %s!\n", loader_ctx->package2_path);
-            generic_panic();
-        } else if (package2_size > PACKAGE2_SIZE_MAX || package2_size <= sizeof(package2_header_t)) {
-            printf("Error: Package2 from %s is too big or too small!\n", loader_ctx->package2_path);
-            generic_panic();
-        }
-
-        if (read_from_file(package2, package2_size, loader_ctx->package2_path) != package2_size) {
-            printf("Error: Could not read Package2 from %s!\n", loader_ctx->package2_path);
-            generic_panic();
-        }
-
-        if (package2_meta_get_size(&package2->metadata) < package2_size) {
-            printf("Error: Package2 from %s is too small!\n", loader_ctx->package2_path);
+        pk2file = fopen(loader_ctx->package2_path, "rb");
+        if (pk2file == NULL) {
+            printf("Error: Failed to open Package2 from %s: %s!\n", loader_ctx->package2_path, strerror(errno));
             generic_panic();
         }
     } else {
 #ifdef I_KNOW_WHAT_IM_DOING_2
-        FILE *bcpkg21 = fopen("bcpkg21:/", "rb");
-        if (bcpkg21 == NULL || fseek(bcpkg21, 0x4000, SEEK_SET) != 0) {
-            printf("Error: Failed to read Package2 from NAND!\n");
+        pk2file = fopen("bcpkg21:/", "rb");
+        if (pk2file == NULL || fseek(pk2file, 0x4000, SEEK_SET) != 0) {
+            printf("Error: Failed to open Package2 from NAND: %s!\n", strerror(errno));
+            fclose(pk2file);
             generic_panic();
         }
-        if (fread(package2, sizeof(package2_header_t), 1, bcpkg21) < 1) {
-            printf("Error: Failed to read Package2 from NAND!\n");
-            generic_panic();
-        }
-
-        package2_size = package2_meta_get_size(&package2->metadata);
-        if (package2_size > PACKAGE2_SIZE_MAX || package2_size <= sizeof(package2_header_t)) {
-            printf("Error: Package2 from NAND is too big or too small!\n");
-            generic_panic();
-        }
-
-        if (fread(package2->data, package2_size - sizeof(package2_header_t), 1, bcpkg21) < 1) {
-            printf("Error: Failed to read Package2 from NAND!\n");
-            generic_panic();
-        }
-        fclose(bcpkg21);
 #else
         printf("Error: Package2 must be loaded from the SD card, unless you know what you are doing!\n");
         generic_panic();
 #endif
     }
 
+    setvbuf(pk2file, NULL, _IONBF, 0); /* Workaround. */
+    if (fread(package2, sizeof(package2_header_t), 1, pk2file) < 1) {
+        printf("Error: Failed to read Package2!\n");
+        generic_panic();
+    }
+
+    package2_size = package2_meta_get_size(&package2->metadata);
+    if (package2_size > PACKAGE2_SIZE_MAX || package2_size <= sizeof(package2_header_t)) {
+        printf("Error: Package2 is too big or too small!\n");
+        generic_panic();
+    }
+/*
+    if (fread(package2->data, package2_size - sizeof(package2_header_t), 1, pk2file) < 1) {
+        printf("Error: Failed to read Package2!\n");
+        generic_panic();
+    }
+*/
+    for (size_t i = 0; i < package2_size - sizeof(package2_header_t); i += 512*32) {
+        /* TODO: check if we have read everything, eventually. */
+        size_t r = fread(package2->data + i, 1, 512, pk2file);
+        if (r == 0) {
+            printf("Error: Failed to read Package2!\n");
+            generic_panic();
+        } else if (r < 512) {
+            break;
+        }
+    }
+    fclose(pk2file);
+    printf("Read package2!\n");
+
     /* Setup boot configuration for Exosphère. */
     nxboot_configure_exosphere();
     nxboot_adjust_exosphere_target_firmware(package2);
@@ -150,6 +152,7 @@ void nxboot_main(void) {
         generic_panic();
     }
 
+    printf("Reading boot0...\n");
     boot0 = fopen("boot0:/", "rb");
     if (boot0 == NULL || package1_read_and_parse_boot0(&package1loader, &package1loader_size, g_keyblobs, &available_revision, boot0) == -1) {
         printf("Error: Couldn't parse boot0: %s!\n", strerror(errno));
@@ -229,8 +232,10 @@ void nxboot_main(void) {
         }
     }
 
+    printf("Rebuilding package2...\n");
     /* Patch package2, adding Thermosphère + custom KIPs. */
     package2_rebuild_and_copy(package2, MAILBOX_EXOSPHERE_CONFIGURATION->target_firmware);
+    printf(u8"Loading Exosphère...\n");
 
     /* Copy Exophère to a good location (or read it directly to it.) */
     if (MAILBOX_EXOSPHERE_CONFIGURATION->target_firmware <= EXOSPHERE_TARGET_FIRMWARE_400) {

fusee/fusee-secondary/src/utils.h

@@ -104,8 +104,8 @@ static inline bool check_32bit_address_range_in_program(uintptr_t addr, size_t s
 
 void hexdump(const void* data, size_t size, uintptr_t addrbase);
 
-void panic(uint32_t code);
-void generic_panic(void);
-void panic_predefined(uint32_t which);
+__attribute__ ((noreturn)) void panic(uint32_t code);
+__attribute__ ((noreturn)) void generic_panic(void);
+__attribute__ ((noreturn)) void panic_predefined(uint32_t which);
 
 #endif