/** * Fusée SD/MMC driver for the Switch * ~ktemkin */ #ifndef __FUSEE_SDMMC_H__ #define __FUSEE_SDMMC_H__ #include #include #include "utils.h" /* Opaque pointer to the Tegra SDMMC registers */ struct tegra_sdmmc; /** * Bus widths supported by the SD/MMC cards. */ enum sdmmc_bus_width { MMC_BUS_WIDTH_1BIT = 0, MMC_BUS_WIDTH_4BIT = 1, MMC_BUS_WIDTH_8BIT = 2, }; /** * Describes the voltages that the host will use to drive the SD card. * CAUTION: getting these wrong can damage (especially embedded) cards! */ enum sdmmc_bus_voltage { MMC_VOLTAGE_3V3 = 0b111, MMC_VOLTAGE_3V0 = 0b110, MMC_VOLTAGE_1V8 = 0b101, }; /** * Represents the different types of devices an MMC object * can represent. */ enum sdmmc_card_type { MMC_CARD_EMMC, MMC_CARD_MMC, MMC_CARD_SD, MMC_CARD_CART, }; /** * Specification versions for SD/MMC cards. */ enum sdmmc_spec_version { /* MMC card versions */ MMC_VERSION_4 = 0, /* SD card versions */ SD_VERSION_1 = 1, SD_VERSION_2 = 2, }; /** * SDMMC controllers */ enum sdmmc_controller { SWITCH_MICROSD = 0, SWITCH_EMMC = 3 }; /** * Primary data structure describing a Fusée MMC driver. */ struct mmc { enum sdmmc_controller controller; /* Controller properties */ char *name; unsigned int timeout; enum sdmmc_card_type card_type; bool use_dma; /* Card properties */ uint8_t cid[15]; uint32_t relative_address; uint8_t partitioned; enum sdmmc_spec_version spec_version; enum sdmmc_bus_width max_bus_width; enum sdmmc_bus_voltage operating_voltage; uint8_t partition_support; uint8_t partition_config; uint8_t partition_attribute; uint32_t partition_switch_time; uint8_t read_block_order; bool uses_block_addressing; /* Pointers to hardware structures */ volatile struct tegra_sdmmc *regs; }; /** * Primary data structure describing a Fusée MMC driver. */ struct mmc; /** * Parititions supported by the Switch eMMC. */ enum sdmmc_partition { MMC_PARTITION_USER = 0, MMC_PARTITION_BOOT1 = 1, MMC_PARITTION_BOOT2 = 2, }; /** * Initiailzes an SDMMC controller for use with an eMMC or SD card device. * * @param mmc An (uninitialized) structure for the MMC device. * @param controller The controller number to be initialized. Either SWITCH_MICROSD or SWITCH_EMMC. */ int sdmmc_init(struct mmc *mmc, enum sdmmc_controller controller); /** * Selects the active MMC partition. Can be used to select * boot partitions for access. Affects all operations going forward. * * @param mmc The MMC controller whose card is to be used. * @param partition The partition number to be selected. * * @return 0 on success, or an error code on failure. */ int sdmmc_select_partition(struct mmc *mmc, enum sdmmc_partition partition); /** * Reads a sector or sectors from a given SD card. * * @param mmc The MMC device to work with. * @param buffer The output buffer to target. * @param sector The sector number to read. * @param count The number of sectors to read. */ int sdmmc_read(struct mmc *mmc, void *buffer, uint32_t sector, unsigned int count); /** * Checks to see whether an SD card is present. * * @mmc mmc The controller with which to check for card presence. * @return true iff a card is present */ bool sdmmc_card_present(struct mmc *mmc); #endif