/*
* Copyright (c) 2018-2020 Atmosphère-NX
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*/
#include
#include "fusee_secure_initialize.hpp"
#include "fusee_registers_di.hpp"
namespace ams::nxboot {
namespace {
constexpr inline const uintptr_t CLKRST = secmon::MemoryRegionPhysicalDeviceClkRst.GetAddress();
constexpr inline const uintptr_t PMC = secmon::MemoryRegionPhysicalDevicePmc.GetAddress();
constexpr inline const uintptr_t AHB = AHB_ARBC(0);
constexpr inline const uintptr_t I2S = I2S_REG(0);
constexpr inline const uintptr_t DISP1 = secmon::MemoryRegionPhysicalDeviceDisp1.GetAddress();
constexpr inline const uintptr_t VIC = secmon::MemoryRegionPhysicalDeviceDsi.GetAddress() + 0x40000;
void DoRcmWorkaround(const void *sbk, size_t sbk_size) {
/* Set the SBK inside the security engine. */
se::SetAesKey(pkg1::AesKeySlot_SecureBoot, sbk, sbk_size);
/* Lock the SBK/SSK as unreadable. */
se::LockAesKeySlot(pkg1::AesKeySlot_SecureBoot, se::KeySlotLockFlags_KeyRead);
se::LockAesKeySlot(pkg1::AesKeySlot_SecureStorage, se::KeySlotLockFlags_KeyRead);
/* Clear TZRAM. */
std::memset(secmon::MemoryRegionPhysicalTzram.GetPointer(), 0, secmon::MemoryRegionPhysicalTzram.GetSize());
/* Clear APBDEV_PMC_CRYPTO_OP. */
reg::Write(PMC + APBDEV_PMC_CRYPTO_OP, 0);
/* Clear the boot reason. */
reg::Write(PMC + APBDEV_PMC_SCRATCH200, 0);
reg::Write(PMC + APBDEV_PMC_CRYPTO_OP, 0);
/* Clear OBS_OVERRIDE/APB2JTAG_OVERRIDE */
reg::ReadWrite(AHB + AHB_AHB_SPARE_REG, AHB_REG_BITS_ENUM(AHB_SPARE_REG_OBS_OVERRIDE_EN, DISABLE),
AHB_REG_BITS_ENUM(AHB_SPARE_REG_APB2JTAG_OVERRIDE_EN, DISABLE));
/* Clear low bits of APBDEV_PMC_SCRATCH49 */
reg::ClearBits(PMC + APBDEV_PMC_SCRATCH49, 0x3);
}
void DoMbistWorkaround() {
/* Configure CLK_RST_CONTROLLER_CLK_SOURCE_SOR1. */
reg::ReadWrite(CLKRST + CLK_RST_CONTROLLER_CLK_SOURCE_SOR1, CLK_RST_REG_BITS_ENUM(CLK_SOURCE_SOR1_SOR1_CLK_SEL0, MUX),
CLK_RST_REG_BITS_ENUM(CLK_SOURCE_SOR1_SOR1_CLK_SEL1, SOR1_CLOCK_SWITCH));
/* Set CSI clock source as PLLD. */
reg::ReadWrite(CLKRST + CLK_RST_CONTROLLER_PLLD_BASE, CLK_RST_REG_BITS_ENUM(PLLD_BASE_PLLD_ENABLE, ENABLE),
CLK_RST_REG_BITS_ENUM(PLLD_BASE_CSI_CLK_SRC, PLL_D));
/* Clear APE, VIC, HOST1X, DISP1 reset. */
reg::Write(CLKRST + CLK_RST_CONTROLLER_RST_DEV_Y_CLR, CLK_RST_REG_BITS_ENUM(RST_DEV_Y_APE_RST, ENABLE));
reg::Write(CLKRST + CLK_RST_CONTROLLER_RST_DEV_X_CLR, CLK_RST_REG_BITS_ENUM(RST_DEV_X_VIC_RST, ENABLE));
reg::Write(CLKRST + CLK_RST_CONTROLLER_RST_DEV_L_CLR, CLK_RST_REG_BITS_ENUM(RST_DEV_L_DISP1_RST, ENABLE), CLK_RST_REG_BITS_ENUM(RST_DEV_L_HOST1X_RST, ENABLE));
/* Wait two microseconds for the devices to come out of reset. */
util::WaitMicroSeconds(2);
/* Set I2S_CTRL.MASTER and clear I2S_CG.SCLG_ENABLE for all I2S registers. */
reg::ReadWrite(I2S + I2S0_I2S_CTRL, I2S_REG_BITS_ENUM(I2S_CTRL_MASTER, ENABLE));
reg::ReadWrite(I2S + I2S0_I2S_CG, I2S_REG_BITS_ENUM(I2S_CG_SLCG_ENABLE, FALSE));
reg::ReadWrite(I2S + I2S1_I2S_CTRL, I2S_REG_BITS_ENUM(I2S_CTRL_MASTER, ENABLE));
reg::ReadWrite(I2S + I2S1_I2S_CG, I2S_REG_BITS_ENUM(I2S_CG_SLCG_ENABLE, FALSE));
reg::ReadWrite(I2S + I2S2_I2S_CTRL, I2S_REG_BITS_ENUM(I2S_CTRL_MASTER, ENABLE));
reg::ReadWrite(I2S + I2S2_I2S_CG, I2S_REG_BITS_ENUM(I2S_CG_SLCG_ENABLE, FALSE));
reg::ReadWrite(I2S + I2S3_I2S_CTRL, I2S_REG_BITS_ENUM(I2S_CTRL_MASTER, ENABLE));
reg::ReadWrite(I2S + I2S3_I2S_CG, I2S_REG_BITS_ENUM(I2S_CG_SLCG_ENABLE, FALSE));
reg::ReadWrite(I2S + I2S4_I2S_CTRL, I2S_REG_BITS_ENUM(I2S_CTRL_MASTER, ENABLE));
reg::ReadWrite(I2S + I2S4_I2S_CG, I2S_REG_BITS_ENUM(I2S_CG_SLCG_ENABLE, FALSE));
/* Set DC_COM_DSC_TOP_CTL.DSC_SLG_OVERRIDE */
reg::SetBits(DISP1 + DC_COM_DSC_TOP_CTL * sizeof(u32), 0x4);
/* Set NV_PVIC_THI_SLCG_OVERRIDE_LOW_A */
reg::SetBits(VIC + NV_PVIC_THI_SLCG_OVERRIDE_LOW_A, 0xFFFFFFFF);
/* Wait two microseconds for configuration to take. */
util::WaitMicroSeconds(2);
/* Set APE, VIC, HOST1X, DISP1 reset. */
reg::Write(CLKRST + CLK_RST_CONTROLLER_RST_DEV_Y_SET, CLK_RST_REG_BITS_ENUM(RST_DEV_Y_APE_RST, ENABLE));
reg::Write(CLKRST + CLK_RST_CONTROLLER_RST_DEV_L_SET, CLK_RST_REG_BITS_ENUM(RST_DEV_L_DISP1_RST, ENABLE), CLK_RST_REG_BITS_ENUM(RST_DEV_L_HOST1X_RST, ENABLE));
reg::Write(CLKRST + CLK_RST_CONTROLLER_RST_DEV_X_SET, CLK_RST_REG_BITS_ENUM(RST_DEV_X_VIC_RST, ENABLE));
/* Set clock enable for a select few devices. */
reg::Write(CLKRST + CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_REG_BITS_ENUM(CLK_ENB_H_CLK_ENB_FUSE, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_H_CLK_ENB_PMC, ENABLE));
reg::Write(CLKRST + CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_REG_BITS_ENUM(CLK_ENB_L_CLK_ENB_CACHE2, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_L_CLK_ENB_GPIO, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_L_CLK_ENB_TMR, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_L_CLK_ENB_RTC, ENABLE));
reg::Write(CLKRST + CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_REG_BITS_ENUM(CLK_ENB_U_CLK_ENB_CRAM2, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_U_CLK_ENB_IRAMD, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_U_CLK_ENB_IRAMC, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_U_CLK_ENB_IRAMB, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_U_CLK_ENB_IRAMA, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_U_CLK_ENB_CSITE, ENABLE));
reg::Write(CLKRST + CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_RST_REG_BITS_ENUM(CLK_ENB_V_CLK_ENB_SE, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_V_CLK_ENB_SPDIF_DOUBLER, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_V_CLK_ENB_APB2APE, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_V_CLK_ENB_MSELECT, ENABLE));
reg::Write(CLKRST + CLK_RST_CONTROLLER_CLK_OUT_ENB_W, CLK_RST_REG_BITS_ENUM(CLK_ENB_W_CLK_ENB_MC1, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_W_CLK_ENB_ENTROPY, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_W_CLK_ENB_PCIERX5, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_W_CLK_ENB_PCIERX4, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_W_CLK_ENB_PCIERX3, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_W_CLK_ENB_PCIERX2, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_W_CLK_ENB_PCIERX1, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_W_CLK_ENB_PCIERX0, ENABLE));
reg::Write(CLKRST + CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_RST_REG_BITS_ENUM(CLK_ENB_X_CLK_ENB_PLLG_REF, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_X_CLK_ENB_DBGAPB, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_X_CLK_ENB_GPU, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_X_CLK_ENB_MC_BBC, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_X_CLK_ENB_MC_CPU, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_X_CLK_ENB_MC_CBPA, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_X_CLK_ENB_MC_CAPA, ENABLE));
reg::Write(CLKRST + CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_RST_REG_BITS_ENUM(CLK_ENB_Y_CLK_ENB_MC_CDPA, ENABLE),
CLK_RST_REG_BITS_ENUM(CLK_ENB_Y_CLK_ENB_MC_CCPA, ENABLE));
/* Clear all LVL2 clock gate overrides to zero. */
reg::Write(CLKRST + CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRA, 0);
reg::Write(CLKRST + CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRB, 0);
reg::Write(CLKRST + CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRC, 0);
reg::Write(CLKRST + CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRD, 0);
reg::Write(CLKRST + CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRE, 0);
/* Reset CSI clock source. */
reg::ReadWrite(CLKRST + CLK_RST_CONTROLLER_PLLD_BASE, CLK_RST_REG_BITS_ENUM(PLLD_BASE_PLLD_BYPASS, DISABLE),
CLK_RST_REG_BITS_ENUM(PLLD_BASE_PLLD_ENABLE, DISABLE),
CLK_RST_REG_BITS_ENUM(PLLD_BASE_PLLD_REF_DIS, REF_ENABLE),
CLK_RST_REG_BITS_ENUM(PLLD_BASE_CSI_CLK_SRC, BRICK));
/* Configure CLK_RST_CONTROLLER_CLK_SOURCE_SOR1. */
reg::ReadWrite(CLKRST + CLK_RST_CONTROLLER_CLK_SOURCE_SOR1, CLK_RST_REG_BITS_ENUM(CLK_SOURCE_SOR1_SOR1_CLK_SEL0, MUX),
CLK_RST_REG_BITS_ENUM(CLK_SOURCE_SOR1_SOR1_CLK_SEL1, SAFE_CLOCK));
/* Configure VI, HOST1X, NVENC clock sources. */
reg::ReadWrite(CLKRST + CLK_RST_CONTROLLER_CLK_SOURCE_VI, CLK_RST_REG_BITS_ENUM(CLK_SOURCE_VI_VI_CLK_SRC, PLLP_OUT0));
reg::ReadWrite(CLKRST + CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X, CLK_RST_REG_BITS_ENUM(CLK_SOURCE_HOST1X_HOST1X_CLK_SRC, PLLP_OUT0));
reg::ReadWrite(CLKRST + CLK_RST_CONTROLLER_CLK_SOURCE_NVENC, CLK_RST_REG_BITS_ENUM(CLK_SOURCE_NVENC_NVENC_CLK_SRC, PLLP_OUT0));
}
void InitializeClock() {
/* TODO */
}
void InitializePinmux(fuse::HardwareType hw_type) {
/* TODO */
}
}
void SecureInitialize(bool enable_log) {
/* Get SoC type/hardware type. */
const auto soc_type = fuse::GetSocType();
const auto hw_type = fuse::GetHardwareType();
/* If Erista, perform bootrom logic (to compensate for RCM exploit) and MBIST workaround. */
if (soc_type == fuse::SocType_Erista) {
/* Potentially perform bootrom compensation. */
{
u32 sbk[4];
if (fuse::GetSecureBootKey(sbk)) {
DoRcmWorkaround(sbk, sizeof(sbk));
}
}
DoMbistWorkaround();
}
/* Setup initial clocks. */
InitializeClock();
/* Setup initial pinmux. */
InitializePinmux(hw_type);
/* Initialize logging. */
if (enable_log) {
clkrst::EnableUartAClock();
}
/* Enable various clocks. */
clkrst::EnableCldvfsClock();
clkrst::EnableI2c1Clock();
clkrst::EnableI2c5Clock();
clkrst::EnableTzramClock();
/* Initialize I2C5. */
i2c::Initialize(i2c::Port_5);
/* Configure pmic system setting. */
pmic::SetSystemSetting();
/* Enable VDD core */
pmic::EnableVddCore();
/* On hoag, enable Ldo8 */
if (hw_type == fuse::HardwareType_Hoag) {
pmic::EnableLdo8();
}
/* Initialize I2C1. */
i2c::Initialize(i2c::Port_1);
/* Configure SCLK_BURST_POLICY. */
reg::ReadWrite(CLKRST + CLK_RST_CONTROLLER_SCLK_BURST_POLICY, CLK_RST_REG_BITS_ENUM(SCLK_BURST_POLICY_SWAKEUP_FIQ_SOURCE, PLLP_OUT0),
CLK_RST_REG_BITS_ENUM(SCLK_BURST_POLICY_SWAKEUP_IRQ_SOURCE, PLLP_OUT0),
CLK_RST_REG_BITS_ENUM(SCLK_BURST_POLICY_SWAKEUP_RUN_SOURCE, PLLP_OUT0),
CLK_RST_REG_BITS_ENUM(SCLK_BURST_POLICY_SWAKEUP_IDLE_SOURCE, PLLP_OUT0));
}
}