mirror of
https://github.com/Atmosphere-NX/Atmosphere.git
synced 2024-11-05 19:51:45 +00:00
66 lines
2 KiB
C
66 lines
2 KiB
C
#include "timers.h"
|
|
#include "uart.h"
|
|
#include "misc.h"
|
|
|
|
/* Adapted from https://github.com/nwert/hekate/blob/master/hwinit/uart.c */
|
|
|
|
void uart_select(UartDevice dev) {
|
|
unsigned int id = (unsigned int)dev;
|
|
PINMUX_AUX_UARTn_TX_0(id) = 0; /* UART */
|
|
PINMUX_AUX_UARTn_RX_0(id) = 0x48; /* UART, enable, pull up */
|
|
PINMUX_AUX_UARTn_RTS_0(id) = 0; /* UART */
|
|
PINMUX_AUX_UARTn_CTS_0(id) = 0x44; /* UART, enable, pull down */
|
|
}
|
|
|
|
void uart_init(UartDevice dev, uint32_t baud) {
|
|
volatile uart_t *uart = get_uart_device(dev);
|
|
|
|
/* Set baud rate. */
|
|
uint32_t rate = (8 * baud + 408000000) / (16 * baud);
|
|
uart->UART_LCR = 0x80; /* Enable DLAB. */
|
|
uart->UART_THR_DLAB = (uint8_t)rate; /* Divisor latch LSB. */
|
|
uart->UART_IER_DLAB = (uint8_t)(rate >> 8); /* Divisor latch MSB. */
|
|
uart->UART_LCR = 0; /* Diable DLAB. */
|
|
|
|
/* Setup UART in fifo mode. */
|
|
uart->UART_IER_DLAB = 0;
|
|
uart->UART_IIR_FCR = 7; /* Enable and clear TX and RX FIFOs. */
|
|
uart->UART_LSR;
|
|
wait(3 * ((baud + 999999) / baud));
|
|
uart->UART_LCR = 3; /* Set word length 8. */
|
|
uart->UART_MCR = 0;
|
|
uart->UART_MSR = 0;
|
|
uart->UART_IRDA_CSR = 0;
|
|
uart->UART_RX_FIFO_CFG = 1;
|
|
uart->UART_MIE = 0;
|
|
uart->UART_ASR = 0;
|
|
}
|
|
|
|
void uart_wait_idle(UartDevice dev, uint32_t which) {
|
|
while (!(get_uart_device(dev)->UART_VENDOR_STATUS & which)) {
|
|
/* Wait */
|
|
}
|
|
}
|
|
|
|
void uart_send(UartDevice dev, const void *buf, size_t len)
|
|
{
|
|
volatile uart_t *uart = get_uart_device(dev);
|
|
|
|
for (size_t i = 0; i < len; i++) {
|
|
while (uart->UART_LSR & UART_TX_FIFO_FULL) {
|
|
/* Wait until the TX FIFO isn't full */
|
|
}
|
|
uart->UART_THR_DLAB = *((const uint8_t *)buf + i);
|
|
}
|
|
}
|
|
|
|
void uart_recv(UartDevice dev, void *buf, size_t len) {
|
|
volatile uart_t *uart = get_uart_device(dev);
|
|
|
|
for (size_t i = 0; i < len; i++) {
|
|
while (uart->UART_LSR & UART_RX_FIFO_EMPTY) {
|
|
/* Wait until the RX FIFO isn't empty */
|
|
}
|
|
*((uint8_t *)buf + i) = uart->UART_THR_DLAB;
|
|
}
|
|
}
|