mirror of
https://github.com/Atmosphere-NX/Atmosphere.git
synced 2024-11-27 14:22:17 +00:00
57 lines
1.8 KiB
C
57 lines
1.8 KiB
C
#include "utils.h"
|
|
#include "lp0.h"
|
|
#include "emc.h"
|
|
#include "pmc.h"
|
|
#include "timer.h"
|
|
|
|
static void emc_trigger_timing_update(void) {
|
|
EMC_TIMING_CONTROL_0 = 1;
|
|
while (EMC_EMC_STATUS_0 & 0x800000) {
|
|
/* Wait until TIMING_UPDATE_STALLED is unset. */
|
|
}
|
|
}
|
|
|
|
/* Puts DRAM into self refresh mode. */
|
|
void emc_put_dram_in_self_refresh_mode(void) {
|
|
/* Verify CH1_ENABLE [PMC]. */
|
|
if (!(EMC_FBIO_CFG7_0 & 4)) {
|
|
reboot();
|
|
}
|
|
|
|
/* Clear config. */
|
|
EMC_CFG_0 = 0;
|
|
emc_trigger_timing_update();
|
|
timer_wait(5);
|
|
|
|
/* Set calibration intervals. */
|
|
EMC_ZCAL_INTERVAL_0 = 0;
|
|
EMC_AUTO_CAL_CONFIG_0 = 0x600; /* AUTO_CAL_MEASURE_STALL | AUTO_CAL_UPDATE_STALL */
|
|
|
|
/* If EMC0 mirror is set, clear digital DLL. */
|
|
if (EMC0_CFG_DIG_DLL_0 & 1) {
|
|
EMC_CFG_DIG_DLL_0 &= 0xFFFFFFFE;
|
|
emc_trigger_timing_update();
|
|
while (EMC0_CFG_DIG_DLL_0 & 1) { /* Wait for EMC0 to clear. */ }
|
|
while (EMC1_CFG_DIG_DLL_0 & 1) { /* Wait for EMC1 to clear. */ }
|
|
} else {
|
|
emc_trigger_timing_update();
|
|
}
|
|
|
|
/* Stall all transactions to DRAM. */
|
|
EMC_REQ_CTRL_0 = 3; /* STALL_ALL_WRITES | STALL_ALL_READS. */
|
|
while (!(EMC0_EMC_STATUS_0 & 4)) { /* Wait for NO_OUTSTANDING_TRANSACTIONS for EMC0. */ }
|
|
while (!(EMC1_EMC_STATUS_0 & 4)) { /* Wait for NO_OUTSTANDING_TRANSACTIONS for EMC1. */ }
|
|
|
|
/* Enable Self-Refresh Mode. */
|
|
EMC_SELF_REF_0 |= 1;
|
|
|
|
|
|
/* Wait until we see the right devices in self refresh mode. */
|
|
uint32_t num_populated_devices = 1;
|
|
if (EMC_ADR_CFG_0) {
|
|
num_populated_devices = 3;
|
|
}
|
|
|
|
while (((EMC0_EMC_STATUS_0 >> 8) & 3) != num_populated_devices) { /* Wait for EMC0 DRAM_IN_SELF_REFRESH to be correct. */ }
|
|
while (((EMC1_EMC_STATUS_0 >> 8) & 3) != num_populated_devices) { /* Wait for EMC1 DRAM_IN_SELF_REFRESH to be correct. */ }
|
|
}
|