mirror of
https://github.com/Atmosphere-NX/Atmosphere.git
synced 2024-11-10 06:01:52 +00:00
143 lines
No EOL
3.4 KiB
C
143 lines
No EOL
3.4 KiB
C
#include <stbool.h>
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
|
|
#include "fuse.h"
|
|
#include "utils.h"
|
|
#include "timers.h"
|
|
|
|
/* Prototypes for internal commands. */
|
|
void fuse_make_regs_visible(void);
|
|
|
|
void fuse_enable_power(void);
|
|
void fuse_disable_power(void);
|
|
void fuse_wait_idle(void);
|
|
|
|
/* Initialize the FUSE driver */
|
|
void fuse_init(void)
|
|
{
|
|
fuse_make_regs_visible();
|
|
|
|
/* TODO: Overrides (iROM patches) and various reads happen here */
|
|
}
|
|
|
|
/* Make all fuse registers visible */
|
|
void fuse_make_regs_visible(void)
|
|
{
|
|
/* TODO: Replace this with a proper CLKRST driver */
|
|
uint32_t* misc_clk_reg = (volatile uint32_t *)mmio_get_device_address(MMIO_DEVID_CLKRST) + 0x48;
|
|
uint32_t misc_clk_val = *misc_clk_reg;
|
|
*misc_clk_reg = (misc_clk_val | (1 << 28));
|
|
}
|
|
|
|
/* Enable power to the fuse hardware array */
|
|
void fuse_enable_power(void)
|
|
{
|
|
FUSE_REGS->FUSE_PWR_GOOD_SW = 1;
|
|
wait(1);
|
|
}
|
|
|
|
/* Disable power to the fuse hardware array */
|
|
void fuse_disable_power(void)
|
|
{
|
|
FUSE_REGS->FUSE_PWR_GOOD_SW = 0;
|
|
wait(1);
|
|
}
|
|
|
|
/* Wait for the fuse driver to go idle */
|
|
void fuse_wait_idle(void)
|
|
{
|
|
uint32_t ctrl_val = 0;
|
|
|
|
/* Wait for STATE_IDLE */
|
|
while ((ctrl_val & (0xF0000)) != 0x40000)
|
|
{
|
|
wait(1);
|
|
ctrl_val = FUSE_REGS->FUSE_CTRL;
|
|
}
|
|
}
|
|
|
|
/* Read a fuse from the hardware array */
|
|
uint32_t fuse_hw_read(uint32_t addr)
|
|
{
|
|
fuse_wait_idle();
|
|
|
|
/* Program the target address */
|
|
FUSE_REGS->FUSE_REG_ADDR = addr;
|
|
|
|
/* Enable read operation in control register */
|
|
uint32_t ctrl_val = FUSE_REGS->FUSE_CTRL;
|
|
ctrl_val &= ~0x3;
|
|
ctrl_val |= 0x1; /* Set FUSE_READ command */
|
|
FUSE_REGS->FUSE_CTRL = ctrl_val;
|
|
|
|
fuse_wait_idle();
|
|
|
|
return FUSE_REGS->FUSE_REG_READ;
|
|
}
|
|
|
|
/* Write a fuse in the hardware array */
|
|
void fuse_hw_write(uint32_t, value, uint32_t addr)
|
|
{
|
|
fuse_wait_idle();
|
|
|
|
/* Program the target address and value */
|
|
FUSE_REGS->FUSE_REG_ADDR = addr;
|
|
FUSE_REGS->FUSE_REG_WRITE = value;
|
|
|
|
/* Enable write operation in control register */
|
|
uint32_t ctrl_val = FUSE_REGS->FUSE_CTRL;
|
|
ctrl_val &= ~0x3;
|
|
ctrl_val |= 0x2; /* Set FUSE_WRITE command */
|
|
FUSE_REGS->FUSE_CTRL = ctrl_val;
|
|
|
|
fuse_wait_idle();
|
|
}
|
|
|
|
/* Sense the fuse hardware array into the shadow cache */
|
|
void fuse_hw_sense(void)
|
|
{
|
|
fuse_wait_idle();
|
|
|
|
/* Enable sense operation in control register */
|
|
uint32_t ctrl_val = FUSE_REGS->FUSE_CTRL;
|
|
ctrl_val &= ~0x3;
|
|
ctrl_val |= 0x3; /* Set FUSE_SENSE command */
|
|
FUSE_REGS->FUSE_CTRL = ctrl_val;
|
|
|
|
fuse_wait_idle();
|
|
}
|
|
|
|
/* Read the SKU info register from the shadow cache */
|
|
uint32_t fuse_get_sku_info(void)
|
|
{
|
|
return FUSE_CHIP_REGS->FUSE_SKU_INFO;
|
|
}
|
|
|
|
/* Read the bootrom patch version from a register in the shadow cache */
|
|
uint32_t fuse_get_bootrom_patch_version(void)
|
|
{
|
|
return FUSE_CHIP_REGS->FUSE_SOC_SPEEDO_1;
|
|
}
|
|
|
|
/* Read a spare bit register from the shadow cache */
|
|
uint32_t fuse_get_spare_bit(uint32_t idx)
|
|
{
|
|
uint32_t spare_bit_val = 0;
|
|
|
|
if ((idx >= 0) && (idx < 32))
|
|
spare_bit_val = FUSE_CHIP_REGS->FUSE_SPARE_BIT[idx];
|
|
|
|
return spare_bit_val;
|
|
}
|
|
|
|
/* Read a reserved ODM register from the shadow cache */
|
|
uint32_t fuse_get_reserved_odm(uint32_t idx)
|
|
{
|
|
uint32_t reserved_odm_val = 0;
|
|
|
|
if ((idx >= 0) && (idx < 8))
|
|
reserved_odm_val = FUSE_CHIP_REGS->FUSE_RESERVED_ODM[idx];
|
|
|
|
return reserved_odm_val;
|
|
} |