* Initial implementation of migration between memory heaps
- Missing OOM handling
- Missing `_map` data safety when remapping
- Copy may not have completed yet (needs some kind of fence)
- Map may be unmapped before it is done being used. (needs scoped access)
- SSBO accesses are all "writes" - maybe pass info in another way.
- Missing keeping map type when resizing buffers (should this be done?)
* Ensure migrated data is in place before flushing.
* Fix issue where old waitable would be signalled.
- There is a real issue where existing Auto<> references need to be replaced.
* Swap bound Auto<> instances when swapping buffer backing
* Fix conversion buffers
* Don't try move buffers if the host has shared memory.
* Make GPU methods return PinnedSpan with scope
* Storage Hint
* Fix stupidity
* Fix rebase
* Tweak rules
Attempt to sidestep BOTW slowdown
* Remove line
* Migrate only when command buffers flush
* Change backing swap log to debug
* Address some feedback
* Disallow backing swap when the flush lock is held by the current thread
* Make PinnedSpan from ReadOnlySpan explicitly unsafe
* Fix some small issues
- Index buffer swap fixed
- Allocate DeviceLocal buffers using a separate block list to images.
* Remove alternative flags
* Address feedback
* GPU: Fast path for adding one texture view to a group
Texture group handles must store a list of their overlapping views, so they can be properly notified when a write is detected, and a few other things relating to texture readback. This is generally created when the group is established, with each handle looping over all views to find its overlaps. This whole process was also done when only a single view was added (and no handles were changed), however...
Sonic Frontiers had a huge cubemap array with 7350 faces (175 cubemaps * 6 faces * 7 levels), so iterating over both handles and existing views added up very fast. Since we are only adding a single view, we only need to _add_ that view to the existing overlaps, rather than recalculate them all.
This greatly improves performance during loading screens and a few seconds into gameplay on the "open zone" sections of Sonic Frontiers. May improve loading times or stutters on some other games.
Note that the current texture cache rules will cause these views to fall out of the cache, as there are more than the hard cap, so the cost will be repaid when reloading the open zone.
I also added some code to properly remove overlaps when texture views are removed, since it seems that was missing.
This can be improved further by only iterating handles that overlap the view (filter by range), but so can a few places in TextureGroup, so better to do all at once. The full generation of overlaps could probably be improved in a similar way.
I recommend testing a few games to make sure nothing breaks.
* Address feedback
* Update sparsely mapped texture ranges without recreating
Important TODO in TexturePool. Smaller TODO: should I look into making textures with views also do this? It needs to be able to detect if the views can be instantly deleted without issue if they're now remapped.
* Actually do partial updates
* Signal group dirty after mappings changed
* Fix various issues (should work now)
* Further optimisation
Should load a lot less data (16x) when partial updating 3d textures.
* Improve stability
* Allow granular uploads on large textures, improve rules
* Actually avoid updating slices that aren't modified.
* Address some feedback, minor optimisation
* Small tweak
* Refactor DereferenceRequest
More specific initialization methods.
* Improve code for resetting handles
* Explain data loading a bit more
* Add some safety for setting null from different threads.
All texture sets come from the one thread, but null sets can come from multiple. Only decrement ref count if we succeeded the null set first.
* Address feedback 1
* Make a bit safer
* Handle mismatching texture size with copy dependencies
* Create copy and render textures with the minimum possible size
* Only align width for comparisons, assume that height is always exact
* Fix IsExactMatch size check
* Allow sampler and copy textures to match textures with larger width
* Delete texture ChangeSize related code
* Move AdjustSize to TextureInfo and give it a better name, adjust usages
* Fix GetMinimumWidthInGob when minimumWidth > width
* Only update render targets that are actually cleared for clear
Avoids creating textures with incorrect sizes
* Delete UpdateRenderTargetState method that is not needed anymore
Clears now only ever sets the render targets that will be cleared rather than all of them
* Allow setting texture data from 1x to fix some textures resetting randomly
Expected targets:
- Deltarune 1+2
- Crash Team Racing
- Those new pokemon games idk
* Allow scaling of MSAA textures, propagate scale on copy.
* Fix Rebase
Oops
* Automatic disable
* A bit more aggressive
* Without the debug log
* Actually decrement the score when writing.
* Add short duration texture cache
This texture cache takes textures that lose their last pool reference and keeps them alive until the next frame, or until an incompatible overlap removes it. This is done since under certain circumstances, a texture's reference can be wiped from a pool despite it still being in use - though typically the reference will return when rendering the next frame.
While this may slightly increase texture memory usage when quickly going through a bunch of temporary textures, it's still bounded due to the overlap removal rule.
This greatly increases performance in Hyrule Warriors: Age of Calamity. It may positively affect some UE4 games which dip framerate severely under certain circumstances.
* Small optimization
* Don't forget this.
* Add short cache dictionary
* Address feedback
* Address some feedback
* Add conversion for 16 bit RGBA formats (not supported in Rosetta)
* Rebase fix
Rebase fix
* Forgot to remove this
* Fix RGBA16 format conversion
* Add RGBA4 -> RGBA8 conversion
* Handle host stride alignment
* Address Feedback Part 1
* Can't count
* Don't zero out rgb when alpha is 0
* Separate RGBA4 and 5-bit component formats
Not sure of a better way to name them...
* Add A1B5G5R5 conversion
* Put this in the right place.
* Make format naming consistent for capabilities
* Change method names
* GPU: Pass SpanOrArray for Texture SetData to avoid copy
Texture data is often converted before upload, meaning that an array was allocated to perform the conversion into. However, the backend SetData methods were being passed a Span of that data, and the Multithreaded layer does `ToArray()` on it so that it can be stored for later! This method can't extract the original array, so it creates a copy.
This PR changes the type passed for textures to a new ref struct called SpanOrArray, which is backed by either a ReadOnlySpan or an array. The benefit here is that we can have a ToArray method that doesn't copy if it is originally backed by an array.
This will also avoid a copy when running the ASTC decoder.
On NieR this was taking 38% of texture upload time, which it does a _lot_ of when you move between areas, so there should be a 1.6x performance boost when strictly uploading textures. No doubt this will also improve texture streaming performance in UE4 games, and maybe a small reduction with video playback.
From the numbers, it's probably possible to improve the upload rate by a further 1.6x by performing layout conversion on GPU. I'm not sure if we could improve it further than that - multithreading conversion on CPU would probably result in memory bottleneck.
This doesn't extend to buffers, since we don't convert their data on the GPU emulator side.
* Remove implicit cast to array.
* WIP Vulkan implementation
* No need to initialize attributes on the SPIR-V backend anymore
* Allow multithreading shaderc and vkCreateShaderModule
You'll only really see the benefit here with threaded-gal or parallel shader cache compile.
Fix shaderc multithreaded changes
Thread safety for shaderc Options constructor
Dunno how they managed to make a constructor not thread safe, but you do you. May avoid some freezes.
* Support multiple levels/layers for blit.
Fixes MK8D when scaled, maybe a few other games. AMD software "safe" blit not supported right now.
* TextureStorage should hold a ref of the foreign storage, otherwise it might be freed while in use
* New depth-stencil blit method for AMD
* Workaround for AMD driver bug
* Fix some tessellation related issues (still doesn't work?)
* Submit command buffer before Texture GetData. (UE4 fix)
* DrawTexture support
* Fix BGRA on OpenGL backend
* Fix rebase build break
* Support format aliasing on SetImage
* Fix uniform buffers being lost when bindings are out of order
* Fix storage buffers being lost when bindings are out of order
(also avoid allocations when changing bindings)
* Use current command buffer for unscaled copy (perf)
Avoids flushing commands and renting a command buffer when fulfilling copy dependencies and when games do unscaled copies.
* Update to .net6
* Update Silk.NET to version 2.10.1
Somehow, massive performance boost. Seems like their vtable for looking up vulkan methods was really slow before.
* Fix PrimitivesGenerated query, disable Transform Feedback queries for now
Lets Splatoon 2 work on nvidia. (mostly)
* Update counter queue to be similar to the OGL one
Fixes softlocks when games had to flush counters.
* Don't throw when ending conditional rendering for now
This should be re-enabled when conditional rendering is enabled on nvidia etc.
* Update findMSB/findLSB to match master's instruction enum
* Fix triangle overlay on SMO, Captain Toad, maybe others?
* Don't make Intel Mesa pay for Intel Windows bugs
* Fix samplers with MinFilter Linear or Nearest (fixes New Super Mario Bros U Deluxe black borders)
* Update Spv.Generator
* Add alpha test emulation on shader (but no shader specialisation yet...)
* Fix R4G4B4A4Unorm texture format permutation
* Validation layers should be enabled for any log level other than None
* Add barriers around vkCmdCopyImage
Write->Read barrier for src image (we want to wait for a write to read it)
Write->Read barrier for dst image (we want to wait for the copy to complete before use)
* Be a bit more careful with texture access flags, since it can be used for anything
* Device local mapping for all buffers
May avoid issues with drivers with NVIDIA on linux/older gpus on windows when using large buffers (?)
Also some performance things and fixes issues with opengl games loading textures weird.
* Cleanup, disable device local buffers for now.
* Add single queue support
Multiqueue seems to be a bit more responsive on NVIDIA. Should fix texture flush on intel. AMD has been forced to single queue for an experiment.
* Fix some validation errors around extended dynamic state
* Remove Intel bug workaround, it was fixed on the latest driver
* Use circular queue for checking consumption on command buffers
Speeds up games that spam command buffers a little. Avoids checking multiple command buffers if multiple are active at once.
* Use SupportBufferUpdater, add single layer flush
* Fix counter queue leak when game decides to use host conditional rendering
* Force device local storage for textures (fixes linux performance)
* Port #3019
* Insert barriers around vkCmdBlitImage (may fix some amd flicker)
* Fix transform feedback on Intel, gl_Position feedback and clears to inexistent depth buffers
* Don't pause transform feedback for multi draw
* Fix draw outside of render pass and missing capability
* Workaround for wrong last attribute on AMD (affects FFVII, STRIKERS1945, probably more)
* Better workaround for AMD vertex buffer size alignment issue
* More instructions + fixes on SPIR-V backend
* Allow custom aspect ratio on Vulkan
* Correct GTK UI status bar positions
* SPIR-V: Functions must always end with a return
* SPIR-V: Fix ImageQuerySizeLod
* SPIR-V: Set DepthReplacing execution mode when FragDepth is modified
* SPIR-V: Implement LoopContinue IR instruction
* SPIR-V: Geometry shader support
* SPIR-V: Use correct binding number on storage buffers array
* Reduce allocations for Spir-v serialization
Passes BinaryWriter instead of the stream to Write and WriteOperand
- Removes creation of BinaryWriter for each instruction
- Removes allocations for literal string
* Some optimizations to Spv.Generator
- Dictionary for lookups of type declarations, constants, extinst
- LiteralInteger internal data format -> ushort
- Deterministic HashCode implementation to avoid spirv result not being the same between runs
- Inline operand list instead of List<T>, falls back to array if many operands. (large performance boost)
TODO: improve instruction allocation, structured program creator, ssa?
* Pool Spv.Generator resources, cache delegates, spv opts
- Pools for Instructions and LiteralIntegers. Can be passed in when creating the generator module.
- NewInstruction is called instead of new Instruction()
- Ryujinx SpirvGenerator passes in some pools that are static. The idea is for these to be shared between threads eventually.
- Estimate code size when creating the output MemoryStream
- LiteralInteger pools using ThreadStatic pools that are initialized before and after creation... not sure of a better way since the way these are created is via implicit cast.
Also, cache delegates for Spv.Generator for functions that are passed around to GenerateBinary etc, since passing the function raw creates a delegate on each call.
TODO: update python spv cs generator to make the coregrammar with NewInstruction and the `params` overloads.
* LocalDefMap for Ssa Rewriter
Rather than allocating a large array of all registers for each block in the shader, allocate one array of all registers and clear it between blocks. Reduces allocations in the shader translator.
* SPIR-V: Transform feedback support
* SPIR-V: Fragment shader interlock support (and image coherency)
* SPIR-V: Add early fragment tests support
* SPIR-V: Implement SwizzleAdd, add missing Triangles ExecutionMode for geometry shaders, remove SamplerType field from TextureMeta
* Don't pass depth clip state right now (fix decals)
Explicitly disabling it is incorrect. OpenGL currently automatically disables based on depth clamp, which is the behaviour if this state is omitted.
* Multisampling support
* Multisampling: Use resolve if src samples count > dst samples count
* Multisampling: We can only resolve for unscaled copies
* SPIR-V: Only add FSI exec mode if used.
* SPIR-V: Use ConstantComposite for Texture Offset Vector
Fixes a bunch of freezes with SPIR-V on AMD hardware, and validation errors. Note: Obviously assumes input offsets are constant, which they currently are.
* SPIR-V: Don't OpReturn if we already OpExit'ed
Fixes spir-v parse failure and stack smashing in RADV (obviously you still need bolist)
* SPIR-V: Only use input attribute type for input attributes
Output vertex attributes should always be of type float.
* Multithreaded Pipeline Compilation
* Address some feedback
* Make this 32
* Update topology with GpuAccessorState
* Cleanup for merge (note: disables spir-v)
* Make more robust to shader compilation failure
- Don't freeze when GLSL compilation fails
- Background SPIR-V pipeline compile failure results in skipped draws, similar to GLSL compilation failure.
* Fix Multisampling
* Only update fragment scale count if a vertex texture needs a scale.
Fixes a performance regression introduced by texture scaling in the vertex stage where support buffer updates would be very frequent, even at 1x, if any textures were used on the vertex stage.
This check doesn't exactly look cheap (a flag in the shader stage would probably be preferred), but it is much cheaper than uploading scales in both vulkan and opengl, so it will do for now.
* Use a bitmap to do granular tracking for buffer uploads.
This path is only taken if the much faster check of "is the buffer rented at all" is triggered, so it doesn't actually end up costing too much, and the time saved by not ending render passes (and on gpu for not waiting on barriers) is probably helpful.
Avoids ending render passes to update buffer data (not all the time)
- 140-180 to 35-45 in SMO metro kingdom (these updates are in the UI)
- Very variable 60-150(!) to 16-25 in mario kart 8 (these updates are in the UI)
As well as allowing more data to be preloaded persistently, this will also allow more data to be loaded in the preload buffer, which should be faster as it doesn't need to insert barriers between draws. (and on tbdr, does not need to flush and reload tile memory)
Improves performance in GPU limited scenarios. Should notably improve performance on TBDR gpus. Still a lot more to do here.
* Copy query results after RP ends, rather than ending to copy
We need to end the render pass to get the data (submit command buffer) anyways...
Reduces render passes created in games that use queries.
* Rework Query stuff a bit to avoid render pass end
Tries to reset returned queries in background when possible, rather than ending the render pass.
Still ends render pass when resetting a counter after draws, but maybe that can be solved too. (by just pulling an empty object off the pool?)
* Remove unnecessary lines
Was for testing
* Fix validation error for query reset
Need to think of a better way to do this.
* SPIR-V: Fix SwizzleAdd and some validation errors
* SPIR-V: Implement attribute indexing and StoreAttribute
* SPIR-V: Fix TextureSize for MS and Buffer sampler types
* Fix relaunch issues
* SPIR-V: Implement LogicalExclusiveOr
* SPIR-V: Constant buffer indexing support
* Ignore unsupported attributes rather than throwing (matches current GLSL behaviour)
* SPIR-V: Implement tessellation support
* SPIR-V: Geometry shader passthrough support
* SPIR-V: Implement StoreShader8/16 and StoreStorage8/16
* SPIR-V: Resolution scale support and fix TextureSample multisample with LOD bug
* SPIR-V: Fix field index for scale count
* SPIR-V: Fix another case of wrong field index
* SPIRV/GLSL: More scaling related fixes
* SPIR-V: Fix ImageLoad CompositeExtract component type
* SPIR-V: Workaround for Intel FrontFacing bug
* Enable SPIR-V backend by default
* Allow null samplers (samplers are not required when only using texelFetch to access the texture)
* Fix some validation errors related to texel block view usage flag and invalid image barrier base level
* Use explicit subgroup size if we can (might fix some block flickering on AMD)
* Take componentMask and scissor into account when clearing framebuffer attachments
* Add missing barriers around CmdFillBuffer (fixes Monster Hunter Rise flickering on NVIDIA)
* Use ClampToEdge for Clamp sampler address mode on Vulkan (fixes Hollow Knight)
Clamp is unsupported on Vulkan, but ClampToEdge behaves almost the same. ClampToBorder on the other hand (which was being used before) is pretty different
* Shader specialization for new Vulkan required state (fixes remaining alpha test issues, vertex stretching on AMD on Crash Bandicoot, etc)
* Check if the subgroup size is supported before passing a explicit size
* Only enable ShaderFloat64 if the GPU supports it
* We don't need to recompile shaders if alpha test state changed but alpha test is disabled
* Enable shader cache on Vulkan and implement MultiplyHighS32/U32 on SPIR-V (missed those before)
* Fix pipeline state saving before it is updated.
This should fix a few warnings and potential stutters due to bad pipeline states being saved in the cache. You may need to clear your guest cache.
* Allow null samplers on OpenGL backend
* _unit0Sampler should be set only for binding 0
* Remove unused PipelineConverter format variable (was causing IOR)
* Raise textures limit to 64 on Vulkan
* No need to pack the shader binaries if shader cache is disabled
* Fix backbuffer not being cleared and scissor not being re-enabled on OpenGL
* Do not clear unbound framebuffer color attachments
* Geometry shader passthrough emulation
* Consolidate UpdateDepthMode and GetDepthMode implementation
* Fix A1B5G5R5 texture format and support R4G4 on Vulkan
* Add barrier before use of some modified images
* Report 32 bit query result on AMD windows (smo issue)
* Add texture recompression support (disabled for now)
It recompresses ASTC textures into BC7, which might reduce VRAM usage significantly on games that uses ASTC textures
* Do not report R4G4 format as supported on Vulkan
It was causing mario head to become white on Super Mario 64 (???)
* Improvements to -1 to 1 depth mode.
- Transformation is only applied on the last stage in the vertex pipeline.
- Should fix some issues with geometry and tessellation (hopefully)
- Reading back FragCoord Z on fragment will transform back to -1 to 1.
* Geometry Shader index count from ThreadsPerInputPrimitive
Generally fixes SPIR-V emitting too many triangles, may change games in OpenGL
* Remove gl_FragDepth scaling
This is always 0-1; the other two issues were causing the problems. Fixes regression with Xenoblade.
* Add Gl StencilOp enum values to Vulkan
* Update guest cache to v1.1 (due to specialization state changes)
This will explode your shader cache from earlier vulkan build, but it must be done. 😔
* Vulkan/SPIR-V support for viewport inverse
* Fix typo
* Don't create query pools for unsupported query types
* Return of the Vector Indexing Bug
One day, everyone will get this right.
* Check for transform feedback query support
Sometimes transform feedback is supported without the query type.
* Fix gl_FragCoord.z transformation
FragCoord.z is always in 0-1, even when the real depth range is -1 to 1. Turns out the only bug was geo and tess stage outputs.
Fixes Pokemon Sword/Shield, possibly others.
* Fix Avalonia Rebase
Vulkan is currently not available on Avalonia, but the build does work and you can use opengl.
* Fix headless build
* Add support for BC6 and BC7 decompression, decompress all BC formats if they are not supported by the host
* Fix BCn 4/5 conversion, GetTextureTarget
BCn 4/5 could generate invalid data when a line's size in bytes was not divisible by 4, which both backends expect.
GetTextureTarget was not creating a view with the replacement format.
* Fix dependency
* Fix inverse viewport transform vector type on SPIR-V
* Do not require null descriptors support
* If MultiViewport is not supported, do not try to set more than one viewport/scissor
* Bounds check on bitmap add.
* Flush queries on attachment change rather than program change
Occlusion queries are usually used in a depth only pass so the attachments changing is a better indication of the query block ending.
Write mask changes are also considered since some games do depth only pass by setting 0 write mask on all the colour targets.
* Add support for avalonia (#6)
* add avalonia support
* only lock around skia flush
* addressed review
* cleanup
* add fallback size if avalonia attempts to render but the window size is 0. read desktop scale after enabling dpi check
* fix getting window handle on linux. skip render is size is 0
* Combine non-buffer with buffer image descriptor sets
* Support multisample texture copy with automatic resolve on Vulkan
* Remove old CompileShader methods from the Vulkan backend
* Add minimal pipeline layouts that only contains used bindings
They are used by helper shaders, the intention is avoiding needing to recompile the shaders (from GLSL to SPIR-V) if the bindings changes on the translated guest shaders
* Pre-compile helper shader as SPIR-V, and some fixes
* Remove pre-compiled shaderc binary for Windows as its no longer needed by default
* Workaround RADV crash
Enabling the descriptor indexing extension, even if it is not used, forces the radv driver to use "bolist".
* Use RobustBufferAccess on NVIDIA gpus
Avoids the SMO waterfall triangle on older NVIDIA gpus.
* Implement GPU selector and expose texture recompression on the UI and config
* Fix and enable background compute shader compilation
Also disables warnings from shader cache pipeline misses.
* Fix error due to missing subpass dependency when Attachment Write -> Shader Read barriers are added
* If S8D24 is not supported, use D32FS8
* Ensure all fences are destroyed on dispose
* Pre-allocate arrays up front on DescriptorSetUpdater, allows the removal of some checks
* Add missing clear layer parameter after rebase
* Use selected gpu from config for avalonia (#7)
* use configured device
* address review
* Fix D32S8 copy workaround (AMD)
Fixes water in Pokemon Legends Arceus on AMD GPUs. Possibly fixes other things.
* Use push descriptors for uniform buffer updates (disabled for now)
* Push descriptor support check, buffer redundancy checks
Should make push descriptors faster, needs more testing though.
* Increase light command buffer pool to 2 command buffers, throw rather than returning invalid cbs
* Adjust bindings array sizes
* Force submit command buffers if memory in use by its resources is high
* Add workaround for AMD GCN cubemap view sins
`ImageCreateCubeCompatibleBit` seems to generally break 2D array textures with mipmaps... even if they are eventually aliased as a cubemap with mipmaps. Forcing a copy here works around the issue.
This could be used in future if enabling this bit reduces performance on certain GPUs. (mobile class is generally a worry)
Currently also enabled on Linux as I don't know if they managed to dodge this bug (someone please tell me). Not enabled on Vega at the moment, but easy to add if the issue is there.
* Add mobile, non-RX variants to the GCN regex.
Also make sure that the 3 digit ones only include numbers starting with 7 or 8.
* Increase image limit per stage from 8 to 16
Xenoblade Chronicles 2 was hiting the limit of 8
* Minor code cleanup
* Fix NRE caused by SupportBufferUpdater calling pipeline ClearBuffer
* Add gpu selector to Avalonia (#8)
* Add gpu selector to avalonia settings
* show backend label on window
* some fixes
* address review
* Minor changes to the Avalonia UI
* Update graphics window UI and locales. (#9)
* Update xaml and update locales
* locale updates
Did my best here but likely needs to be checked by native speakers, especially the use of ampersands in greek, russian and turkish?
* Fix locales with more (?) correct translations.
* add separator to render widget
* fix spanish and portuguese
* Add new IdList, replaces buffer list that could not remove elements and had unbounded growth
* Don't crash the settings window if Vulkan is not supported
* Fix Actions menu not being clickable on GTK UI after relaunch
* Rename VulkanGraphicsDevice to VulkanRenderer and Renderer to OpenGLRenderer
* Fix IdList and make it not thread safe
* Revert useless OpenGL format table changes
* Fix headless project build
* List throws ArgumentOutOfRangeException
* SPIR-V: Fix tessellation
* Increase shader cache version due to tessellation fix
* Reduce number of Sync objects created (improves perf in some specific titles)
* Fix vulkan validation errors for NPOT compressed upload and GCN workaround.
* Add timestamp to the shader cache and force rebuild if host cache is outdated
* Prefer Mail box present mode for popups (#11)
* Prefer Mail box present mode
* fix debug
* switch present mode when vsync is toggled
* only disable vsync on the main window
* SPIR-V: Fix geometry shader input load with transform feedback
* BC7 Encoder: Prefer more precision on alpha rather than RGB when alpha is 0
* Fix Avalonia build
* Address initial PR feedback
* Only set transform feedback outputs on last vertex stage
* Address riperiperi PR feedback
* Remove outdated comment
* Remove unused constructor
* Only throw for negative results
* Throw for QueueSubmit and other errors
No point in delaying the inevitable
* Transform feedback decorations inside gl_PerVertex struct breaks the NVIDIA compiler
* Fix some resolution scale issues
* No need for two UpdateScale calls
* Fix comments on SPIR-V generator project
* Try to fix shader local memory size
On DOOM, a shader is using local memory, but both Low and High size are 0, CRS size is 1536, it seems to store on that region?
* Remove RectangleF that is now unused
* Fix ImageGather with multiple offsets
Needs ImageGatherExtended capability, and must use `ConstantComposite` instead of `CompositeConstruct`
* Address PR feedback from jD in all projects except Avalonia
* Address most of jD PR feedback on Avalonia
* Remove unsafe
* Fix VulkanSkiaGpu
* move present mode request out of Create Swapchain method
* split more parts of create swapchain
* addressed reviews
* addressed review
* Address second batch of jD PR feedback
* Fix buffer <-> image copy row length and height alignment
AlignUp helper does not support NPOT alignment, and ASTC textures can have NPOT block sizes
* Better fix for NPOT alignment issue
* Use switch expressions on Vulkan EnumConversion
Thanks jD
* Fix Avalonia build
* Add Vulkan selection prompt on startup
* Grammar fixes on Vulkan prompt message
* Add missing Vulkan migration flag
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
Co-authored-by: Emmanuel Hansen <emmausssss@gmail.com>
Co-authored-by: MutantAura <44103205+MutantAura@users.noreply.github.com>
* Changes 1
* Changes 2
* Better ModifiedSequence handling
This should handle PreciseEvents properly, and simplifies a few things.
* Minor changes, remove debug log
* Handle stage.Info being null
Hopefully fixes Catherine crash
* Fix shader specialization fast texture lookup
* Fix some things.
* Address Feedback Part 1
* Make method static.
* Use copy dependency for textures that differs in multisample but are otherwise compatible
* Remove allowMs flag as it's no longer required for correctness, it's just an optimization now
* Dispose intermmediate pool
* Add support for BC1/2/3 decompression (for 3D textures)
* Optimize and clean up
* Unsafe not needed here
* Fix alpha value interpolation when a0 <= a1
This fixes some regressions caused by #2971 which caused rendered 3D texture data to be lost for most slices. Fixes issues with Xenoblade 2's colour grading, probably a ton of other games.
This also removes the check from TextureCache, making it the tiniest bit smaller (any win is a win here).
* Initial test for texture sync
* WIP new texture flushing setup
* Improve rules for incompatible overlaps
Fixes a lot of issues with Unreal Engine games. Still a few minor issues (some caused by dma fast path?) Needs docs and cleanup.
* Cleanup, improvements
Improve rules for fast DMA
* Small tweak to group together flushes of overlapping handles.
* Fixes, flush overlapping texture data for ASTC and BC4/5 compressed textures.
Fixes the new Life is Strange game.
* Flush overlaps before init data, fix 3d texture size/overlap stuff
* Fix 3D Textures, faster single layer flush
Note: nosy people can no longer merge this with Vulkan. (unless they are nosy enough to implement the new backend methods)
* Remove unused method
* Minor cleanup
* More cleanup
* Use the More Fun and Hopefully No Driver Bugs method for getting compressed tex too
This one's for metro
* Address feedback, ASTC+ETC to FormatClass
* Change offset to use Span slice rather than IntPtr Add
* Fix this too
Rather than calculating this for every sampler, this PR calculates if a texture can force anisotropy when its info is set, and exposes the value via a public boolean.
This should help texture/sampler heavy games when anisotropic filtering is not Auto, like UE4 ones (or so i hear?). There is another cost where samplers are created twice when anisotropic filtering is enabled, but I'm not sure how relevant this one is.
* Lift textures in the AutoDeleteCache for all modifications.
Before, this would only apply to render targets and texture blit. Now it applies to image stores, the fast dma copy path and any other type of modification.
Image store always at least has one reference in the texture pool, so the function of the AutoDeleteCache keeping textures _alive_ is not useful, but a very important function for a while has been its use to flush textures in order of modification when they are dereferenced, so that their data is not lost.
Before, textures populated using image stores were being dereferenced and reloaded as garbage. Now, when these textures are dereferenced, their data will be put back into memory, and everything stays intact.
Fixes lighting breaking when switching levels in THPS1+2, and potentially some more UE4 games. I've tested a bunch more games for regressions and performance impact, but they all seem fine.
* Lift copy srcTexture so that it doesn't remain referenceless
* Perform lift before reference count change on unbind.
It's important to lift on unbind as that is the moment the texture was truly last modified, but definitely not after releasing every single reference.
* Avoid deleting textures when their data does not overlap.
It's possible that while two textures start and end addresses indicate an overlap, that the actual data contained within them is sparse due to a layer stride. One such possibility is array slices of a cubemap at different mip levels - they overlap on a whole, but the actual texture data fills the gaps between each other's layers rather than actually overlapping.
This fixes issues with UE4 games having incorrect lighting (solid white screen or really dark shadows). There are still remaining issues with games that use the 3D texture prebaked lighting, such as THPS1+2.
This PR also fixes a bug with TexturePool's resized texture handling where the base level in the descriptor was not considered.
* AllRegions granularity for 3d textures is now by level rather than by slice.
* Address feedback
This greatly reduces memory usage in games that aggressively reuse memory without removing dead textures from the pool, such as the Xenoblade games, UE3 games, and to a lesser extent, UE4/unity games.
This change stops memory usage from ballooning in xenoblade and some other games. It will also reduce texture view/dependency complexity in some games - for example in MK8D it will reduce the number of surface copies between lighting cubemaps generated for actors.
There shouldn't be any performance impact from doing this, though the deletion and creation of textures could be improved by improving the OpenGL texture storage cache, which is very simple and limited right now. This will be improved in future.
Another potential error has been fixed with the texture cache, which could prevent data loss when data is interchangably written to textures from both the GPU and CPU. It was possible that the dirty flag for a texture would be consumed without the data being synchronized on next use, due to the old overlap check. This check no longer consumes the dirty flag.
Please test a bunch of games to make sure they still work, and there are no performance regressions.
* Use "Undesired" scale mode for certain textures rather than blacklisting
* Nit
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Return mapped buffer pointer directly for flush, WriteableRegion for textures
A few changes here to generally improve performance, even for platforms not using the persistent buffer flush.
- Texture and buffer flush now return a ReadOnlySpan<byte>. It's guaranteed that this span is pinned in memory, but it will be overwritten on the next flush from that thread, so it is expected that the data is used before calling again.
- As a result, persistent mappings no longer copy to a new array - rather the persistent map is returned directly as a Span<>. A similar host array is used for the glGet flushes instead of allocating new arrays each time.
- Texture flushes now do their layout conversion into a WriteableRegion when the texture is not MultiRange, which allows the flush to happen directly into guest memory rather than into a temporary span, then copied over. This avoids another copy when doing layout conversion.
Overall, this saves 1 data copy for buffer flush, 1 copy for linear textures with matching source/target stride, and 2 copies for block textures or linear textures with mismatching strides.
* Fix tests
* Fix array pointer for Mesa/Intel path
* Address some feedback
* Update method for getting array pointer.
* Make GPU memory manager a member of GPU channel
* Move physical memory instance to the memory manager, and the caches to the physical memory
* PR feedback
* Ground work for separate GPU channels
* Rename TextureManager to TextureCache
* Decouple texture bindings management from the texture cache
* Rename BufferManager to BufferCache
* Decouple buffer bindings management from the buffer cache
* More comments and proper disposal
* PR feedback
* Force host state update on channel switch
* Typo
* PR feedback
* Missing using
* Compare aligned size for largest mip level when considering sampler resize
When selecting a texture that's a view for a sampler resize, we should take care that resizing it doesn't change the aligned size of any larger mip levels.
This PR covers two cases:
- When creating a view of the texture, we check that the aligned size of the view shifted up to level 0 still matches the aligned size of the container. If it does not, a copy dependency is created rather than resizing.
- When searching for a texture for sampler, textures that do _not_ match our aligned size when both are shifted up by its base level are not considered an exact match, as resizing the found texture will cause the mip 0 aligned size to change. It will create a copy dependency view instead.
Fixes graphical errors and crashes (on flush) in various Unity games that use render-to-texture.
* Move shared code to its own method.
* Improve handling for unmapped GPU resources
- Fixed a memory tracking bug that would set protection on empty PTEs
- When a texture's memory is (partially) unmapped, all pool references are forcibly removed and the texture must be rediscovered to draw with it. This will also force the texture discovery to always compare the texture's range for a match.
- RegionHandles now know if they are unmapped, and automatically unset their dirty flag when unmapped.
- Partial texture sync now loads only the region of texture that has been modified. Unmapped memory tracking handles cause dirty flags for a texture group handle to be ignored.
This greatly improves the emulator's stability for newer UE4 games.
* Address feedback, fix MultiRange slice
Fixed an issue where the size of the multi-range slice would be miscalculated.
* Update Ryujinx.Memory/Range/MultiRange.cs (feedback)
Co-authored-by: Mary <thog@protonmail.com>
Co-authored-by: Mary <thog@protonmail.com>
* Initial implementation (3d tex mips broken)
This works rather well for most games, just need to fix 3d texture mips.
* Cleanup
* Address feedback
* Copy Dependencies and various other fixes
* Fix layer/level offset for copy from view<->view.
* Remove dirty flag from dependency
The dirty flag behaviour is not needed - DeferredCopy is all we need.
* Fix tracking mip slices.
* Propagate granularity (fix astral chain)
* Address Feedback pt 1
* Save slice sizes as part of SizeInfo
* Fix nits
* Fix disposing multiple dependencies causing a crash
This list is obviously modified when removing dependencies, so create a copy of it.
* Support for resources on non-contiguous GPU memory regions
* Implement MultiRange physical addresses, only used with a single range for now
* Actually use non-contiguous ranges
* GetPhysicalRegions fixes
* Documentation and remove Address property from TextureInfo
* Finish implementing GetWritableRegion
* Fix typo
* Allow copy destination to have a different scale from source
Will result in more scaled copy destinations, but allows scaling in some games that copy textures to the output framebuffer.
* Support copying multiple levels/layers
Uses glFramebufferTextureLayer to copy multiple layers, copies levels individually (and scales the regions).
Remove CopyArrayScaled, since the backend copy handles it now.
* Size hints for copy regions and viewport dimensions to avoid data loss
* Reword comment.
* Use info for the rule rather than calculating aligned size.
* Reorder min/max, remove spaces
