Signal and setup events correctly
Eliminate possible races
Use a single event
Mark volatiles and reduce scope of waithandles
Common handler
100ms -> 50ms
* Implement VCNT based on AArch64 CNT
Add tests
* Update PTC version
* Address LDj's comments
* Explicit size in encoding
* Tighter tests
* Replace SoftFallback with IR helper
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
* Reduce one BitwiseAnd from IR fallback
Based on popcount64b from https://en.wikipedia.org/wiki/Hamming_weight#Efficient_implementation
* Rename parameter and add assert
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
* PPTC & Pool Enhancements.
* Avoid buffer allocations in CodeGenContext.GetCode(). Avoid stream allocations in PTC.PtcInfo.
Refactoring/nits.
* Use XXHash128, for Ptc.Load & Ptc.Save, x10 faster than Md5.
* Why not a nice Span.
* Added a simple PtcFormatter library for deserialization/serialization, which does not require reflection, in use at PtcJumpTable and PtcProfiler; improves maintainability and simplicity/readability of affected code.
* Nits.
* Revert #1987.
* Revert "Revert #1987."
This reverts commit 998be765cf.
* Enable PTE null checks again
* Do address validation on EmitPtPointerLoad, and make it branchless
* PTC version increment
* Mask of pointer tag for exclusive access
* Move mask to the correct place
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
* Optimization | Modify Add Instruction to use LEA instead.
Currently, the add instruction requires 4 registers to take place. By using LEA, we can effectively perform the same working using 3 registers, reducing memory spills and improving translation efficiency.
* Fix IsSameOperandDestSrc1 Check for Add
* Use LEA if Dest != SRC1
* Update IsSameOperandDestSrc1 to account for Cases where Dest and Src1 can be same for add
* Fix error in logic
* Typo
* Add paranthesis for clarity
* Compare registers as requested.
* Cleanup if statement, use same comparison method as generateCopy
* Make change as recommended by gdk
* Perform check only when Add calls are made
* use ensure sametype for lea, fix else
* Update comment
* Update version #
* Add VCLZ fast path
* Add VCLZ.8B/16B SSSE3 fast path
* Add VCLZ.4H/8H SSSE3 fast path
* Add VCLZ.2S/4S SSE2 fast path
* Improve CLZ.4H/8H fast path
* Improve CLZ.2S/4S fast path
* Set PPTC version
* Added support for offline invalidation, via PPTC, of low cq translations replaced by high cq translations; both on a single run and between runs.
Added invalidation of .cache files in the event of reuse on a different user operating system.
Added .info and .cache files invalidation in case of a failed stream decompression.
Nits.
* InternalVersion = 1712;
* Nits.
* Address comment.
* Get rid of BinaryFormatter.
Nits.
* Move Ptc.LoadTranslations().
Nits.
* Nits.
* Fixed corner cases (in case backup copies have to be used). Added save logs.
* Not core fixes.
* Complement to the previous commit. Added load logs. Removed BinaryFormatter leftovers.
* Add LoadTranslations log.
* Nits.
* Removed the search and management of LowCq overlapping functions.
* Final increment of .info and .cache flags.
* Nit.
* Free up memory allocated by Pools during any PPTC translations at boot time.
* Nit due to rebase.
* Add a simple Pools Limiter.
* Nits.
* Fix missing JumpTable.RegisterFunction() due to rebase.
Clear MemoryStreams as soon as possible, when they are no longer needed.
* Code cleaning.
* Nit for retrigger Checks.
* Update Ptc.cs
* Contextual refactoring of Translator. Ignore resetting of pools for DirectCallStubs.
* Nit for retrigger Checks.
* Add Pmull_V Sse fast path only, both "8/16B -> 8H" and "1/2D -> 1Q" variants; with Test.
* Add Clmul fast path for the 128 bits variant.
* Small optimisation (save 60 instructions) for the Sse fast path about the 128 bits variant.
* Add slow path, both variants. Fix V128 Shl/Shr when shift = 0.
* A32: Add Vmull_I P64 variant (slow path); not tested.
* A32: Add Vmull_I_P8_P64 Test and fix P64 variant.
* Added support for offline invalidation, via PPTC, of low cq translations replaced by high cq translations; both on a single run and between runs.
Added invalidation of .cache files in the event of reuse on a different user operating system.
Added .info and .cache files invalidation in case of a failed stream decompression.
Nits.
* InternalVersion = 1712;
* Nits.
* Address comment.
* Get rid of BinaryFormatter.
Nits.
* Move Ptc.LoadTranslations().
Nits.
* Nits.
* Fixed corner cases (in case backup copies have to be used). Added save logs.
* Not core fixes.
* Complement to the previous commit. Added load logs. Removed BinaryFormatter leftovers.
* Add LoadTranslations log.
* Nits.
* Removed the search and management of LowCq overlapping functions.
* Final increment of .info and .cache flags.
* Nit.
* Free up memory allocated by Pools during any PPTC translations at boot time.
* Nit due to rebase.
* Added support for offline invalidation, via PPTC, of low cq translations replaced by high cq translations; both on a single run and between runs.
Added invalidation of .cache files in the event of reuse on a different user operating system.
Added .info and .cache files invalidation in case of a failed stream decompression.
Nits.
* InternalVersion = 1712;
* Nits.
* Address comment.
* Get rid of BinaryFormatter.
Nits.
* Move Ptc.LoadTranslations().
Nits.
* Nits.
* Fixed corner cases (in case backup copies have to be used). Added save logs.
* Not core fixes.
* Complement to the previous commit. Added load logs. Removed BinaryFormatter leftovers.
* Add LoadTranslations log.
* Nits.
* Removed the search and management of LowCq overlapping functions.
* Final increment of .info and .cache flags.
* Nit.
* GetIndirectFunctionAddress(): Validate that writing actually takes place in dynamic table memory range (and not elsewhere).
* Fix Ptc.UpdateInfo() due to rebase.
* Nit for retrigger Checks.
* Nit for retrigger Checks.
* Initial cache memory allocator implementation
* Get rid of CallFlag
* Perform cache cleanup on exit
* Basic cache invalidation
* Thats not how conditionals works in C# it seems
* Set PTC version to PR number
* Address PR feedback
* Update InstEmitFlowHelper.cs
* Flag clear on address is no longer needed
* Do not include exit block in function size calculation
* Dispose jump table
* For future use
* InternalVersion = 1519 (force retest).
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
* Implement VFNMA.F<32/64>
* Update PTC Version
* Update Implementation & Renames & Correct Order
* Fix alignment
* Update implementation to not trigger assert
* Actually use the intrinsic that makes sense :)
* Use backup when PTC compression is corrupt
* Apply suggestions from code review
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
Co-authored-by: LDj3SNuD <35856442+LDj3SNuD@users.noreply.github.com>
* shader cache: Fix Linux boot issues
This rollback the init logic back to previous state, and replicate the
way PTC handle initialization.
* shader cache: set default state of ready for translation event to false
* Fix cpu unit tests
* WIP Range Tracking
- Texture invalidation seems to have large problems
- Buffer/Pool invalidation may have problems
- Mirror memory tracking puts an additional `add` in compiled code, we likely just want to make HLE access slower if this is the final solution.
- Native project is in the messiest possible location.
- [HACK] JIT memory access always uses native "fast" path
- [HACK] Trying some things with texture invalidation and views.
It works :)
Still a few hacks, messy things, slow things
More work in progress stuff (also move to memory project)
Quite a bit faster now.
- Unmapping GPU VA and CPU VA will now correctly update write tracking regions, and invalidate textures for the former.
- The Virtual range list is now non-overlapping like the physical one.
- Fixed some bugs where regions could leak.
- Introduced a weird bug that I still need to track down (consistent invalid buffer in MK8 ribbon road)
Move some stuff.
I think we'll eventually just put the dll and so for this in a nuget package.
Fix rebase.
[WIP] MultiRegionHandle variable size ranges
- Avoid reprotecting regions that change often (needs some tweaking)
- There's still a bug in buffers, somehow.
- Might want different api for minimum granularity
Fix rebase issue
Commit everything needed for software only tracking.
Remove native components.
Remove more native stuff.
Cleanup
Use a separate window for the background context, update opentk. (fixes linux)
Some experimental changes
Should get things working up to scratch - still need to try some things with flush/modification and res scale.
Include address with the region action.
Initial work to make range tracking work
Still a ton of bugs
Fix some issues with the new stuff.
* Fix texture flush instability
There's still some weird behaviour, but it's much improved without this. (textures with cpu modified data were flushing over it)
* Find the destination texture for Buffer->Texture full copy
Greatly improves performance for nvdec videos (with range tracking)
* Further improve texture tracking
* Disable Memory Tracking for view parents
This is a temporary approach to better match behaviour on master (where invalidations would be soaked up by views, rather than trigger twice)
The assumption is that when views are created to a texture, they will cover all of its data anyways. Of course, this can easily be improved in future.
* Introduce some tracking tests.
WIP
* Complete base tests.
* Add more tests for multiregion, fix existing test.
* Cleanup Part 1
* Remove unnecessary code from memory tracking
* Fix some inconsistencies with 3D texture rule.
* Add dispose tests.
* Use a background thread for the background context.
Rather than setting and unsetting a context as current, doing the work on a dedicated thread with signals seems to be a bit faster.
Also nerf the multithreading test a bit.
* Copy to texture with matching alignment
This extends the copy to work for some videos with unusual size, such as tutorial videos in SMO. It will only occur if the destination texture already exists at XCount size.
* Track reads for buffer copies. Synchronize new buffers before copying overlaps.
* Remove old texture flushing mechanisms.
Range tracking all the way, baby.
* Wake the background thread when disposing.
Avoids a deadlock when games are closed.
* Address Feedback 1
* Separate TextureCopy instance for background thread
Also `BackgroundContextWorker.InBackground` for a more sensible idenfifier for if we're in a background thread.
* Add missing XML docs.
* Address Feedback
* Maybe I should start drinking coffee.
* Some more feedback.
* Remove flush warning, Refocus window after making background context
* Changes to allow explicit management of service threads
* Remove now unused code
* Remove ThreadCounter, its no longer needed
* Allow and use separate server per service, also fix exit issues
* New policy change: PTC version now uses PR number
* Implement block placement
Implement a simple pass which re-orders cold blocks at the end of the
list of blocks in the CFG.
* Set PPTC version
* Use Array.Resize
Address gdkchan's feedback
* Relax block ordering constraints
Before `block.Next` had to follow `block.ListNext`, now it does not.
Instead `CodeGenerator` will now emit the necessary jump instructions
to ensure control flow.
This makes control flow and block order modifications easier. It also
eliminates some simple cases of redundant branches.
* Set PPTC version
* SIMD&FP load/store with scale > 4 should be undefined
* Catch more invalid encodings for FP&SIMD LDR/STR (reg variant)
* Set PTC version to PR number
* Allow launching with custom data directories
Don't load alternate keys when using custom directory
* Address gdkchan's comments
* Misc fixes to log levels
Added more enabled log levels by default
Moved successful config updation to Notice as
1. It's not a warning
2. Warnings could've been disabled by the config load and hence message
would be lost
* Add Compare instruction
* Add BranchIf instruction
* Use test when BranchIf & Compare against 0
* Propagate Compare into BranchIfTrue/False use
- Propagate Compare operations into their BranchIfTrue/False use and
turn these into a BranchIf.
- Clean up Comparison enum.
* Replace BranchIfTrue/False with BranchIf
* Use BranchIf in EmitPtPointerLoad
- Using BranchIf early instead of BranchIfTrue/False improves LCQ and
reduces the amount of work needed by the Optimizer.
EmitPtPointerLoader was a/the big producer of BranchIfTrue/False.
- Fix asserts firing when assembling BitwiseAnd because of type
mismatch in EmitStoreExclusive. This is harmless and should not
cause any diffs.
* Increment PPTC interval version
* Improve IRDumper for BranchIf & Compare
* Use BranchIf in EmitNativeCall
* Clean up
* Do not emit test when immediately preceded by and
* Logger class changes only
Now compile-time checking is possible with the help of Nullable Value
types.
* Misc formatting
* Manual optimizations
PrintGuestLog
PrintGuestStackTrace
Surfaceflinger DequeueBuffer
* Reduce SendVibrationXX log level to Debug
* Add Notice log level
This level is always enabled and used to print system info, etc...
Also, rewrite LogColor to switch expression as colors are static
* Unify unhandled exception event handlers
* Print enabled LogLevels during init
* Re-add App Exit disposes in proper order
nit: switch case spacing
* Revert PrintGuestStackTrace to Info logs due to #1407
PrintGuestStackTrace is now called in some critical error handlers
so revert to old behavior as KThread isn't part of Guest.
* Batch replace Logger statements
* Use movd,movq for i32/64 VectorExtract %x, 0x0
* Increment PPTC interval version
* Use else-if instead
- Address gdkchan's feedback.
- Clean up Debug.Assert calls
* Inline `count` expression into Debug.Assert
Apparently the CoreCLR JIT will not eliminate this. :(
* Add Fmax/minv_V & S/Ushl_S Inst.s with Tests. Fix Maxps/d & Minps/d double zero sign handling. Allows better handling of NaNs.
* Optimized EmitSse2VectorIsNaNOpF() for multiple uses per opF.
* Add CRC32 A32 instructions.
* Fix CRC32 instructions.
* Add CRC intrinsic and fast path.
Loop is currently unrolled, will look into adding temp vars after tests are added.
* Begin work on Crc tests
* Fix SSE4.2 path for CRC32C, finialize tests.
* Remove unused IR path.
* Fix spacing between prefix checks.
* This should be Src.
* PTC Version
* OpCodeTable Order
* Integer check improvement. Value and Crc can be either 32 or 64 size.
* This wasn't necessary...
* If size is 3, value type must be I64.
* Fix same src+dest handling for non crc intrinsics.
* Pre-fix (ha) issue with vex encodings
* Add Vmvn (register), tests for both Vmvn variants.
* Add Vpmin, Vpmax, improve Non-FastFp accuracy for Vpadd
* Rebase on top of PTC.
* Add Nopcode
* Increment PTC version.
* Fix nits.
* Generalize tail continues
* Fix DecodeBasicBlock
`Next` and `Branch` would be null, which is not the state expected by
the branch instructions. They end up branching or falling into a block
which is never populated by the `Translator`. This causes an assert to
be fired when building the CFG.
* Clean up Decode overloads
* Do not synchronize when branching into exit block
If we're branching into an exit block, that exit block will tail
continue into another translation which already has a synchronization.
* Remove A32 predicate tail continue
If `block` is not an exit block then the `block.Next` must exist (as
per the last instruction of `block`).
* Throw if decoded 0 blocks
Address gdkchan's feedback
* Rebuild block list instead of setting to null
Address gdkchan's feedback
* Delete DelegateTypes.cs
* Delete DelegateCache.cs
* Add files via upload
* Update Horizon.cs
* Update Program.cs
* Update MainWindow.cs
* Update Aot.cs
* Update RelocEntry.cs
* Update Translator.cs
* Update MemoryManager.cs
* Update InstEmitMemoryHelper.cs
* Update Delegates.cs
* Nit.
* Nit.
* Nit.
* 10 fewer MSIL bytes for us
* Add comment. Nits.
* Update Translator.cs
* Update Aot.cs
* Nits.
* Opt..
* Opt..
* Opt..
* Opt..
* Allow to change compression level.
* Update MemoryManager.cs
* Update Translator.cs
* Manage corner cases during the save phase. Nits.
* Update Aot.cs
* Translator response tweak for Aot disabled. Nit.
* Nit.
* Nits.
* Create DelegateHelpers.cs
* Update Delegates.cs
* Nit.
* Nit.
* Nits.
* Fix due to #784.
* Fixes due to #757 & #841.
* Fix due to #846.
* Fix due to #847.
* Use MethodInfo for managed method calls.
Use IR methods instead of managed methods about Max/Min (S/U).
Follow-ups & Nits.
* Add missing exception messages.
Reintroduce slow path for Fmov_Vi.
Implement slow path for Fmov_Si.
* Switch to the new folder structure.
Nits.
* Impl. index-based relocation information. Impl. cache file version field.
* Nit.
* Address gdkchan comments.
Mainly:
- fixed cache file corruption issue on exit; - exposed a way to disable AOT on the GUI.
* Address AcK77 comment.
* Address Thealexbarney, jduncanator & emmauss comments.
Header magic, CpuId (FI) & Aot -> Ptc.
* Adaptation to the new application reloading system.
Improvements to the call system of managed methods.
Follow-ups.
Nits.
* Get the same boot times as on master when PTC is disabled.
* Profiled Aot.
* A32 support (#897).
* #975 support (1 of 2).
* #975 support (2 of 2).
* Rebase fix & nits.
* Some fixes and nits (still one bug left).
* One fix & nits.
* Tests fix (by gdk) & nits.
* Support translations not only in high quality and rejit.
Nits.
* Added possibility to skip translations and continue execution, using `ESC` key.
* Update SettingsWindow.cs
* Update GLRenderer.cs
* Update Ptc.cs
* Disabled Profiled PTC by default as requested in the past by gdk.
* Fix rejit bug. Increased number of parallel translations. Add stack unwinding stuffs support (1 of 2).
Nits.
* Add stack unwinding stuffs support (2 of 2). Tuned number of parallel translations.
* Restored the ability to assemble jumps with 8-bit offset when Profiled PTC is disabled or during profiling.
Modifications due to rebase.
Nits.
* Limited profiling of the functions to be translated to the addresses belonging to the range of static objects only.
* Nits.
* Nits.
* Update Delegates.cs
* Nit.
* Update InstEmitSimdArithmetic.cs
* Address riperiperi comments.
* Fixed the issue of unjustifiably longer boot times at the second boot than at the first boot, measured at the same time or reference point and with the same number of translated functions.
* Implemented a simple redundant load/save mechanism.
Halved the value of Decoder.MaxInstsPerFunction more appropriate for the current performance of the Translator.
Replaced by Logger.PrintError to Logger.PrintDebug in TexturePool.cs about the supposed invalid texture format to avoid the spawn of the log.
Nits.
* Nit.
Improved Logger.PrintError in TexturePool.cs to avoid log spawn.
Added missing code for FZ handling (in output) for fp max/min instructions (slow paths).
* Add configuration migration for PTC
Co-authored-by: Thog <me@thog.eu>
* Improve IRDumper
* Make Symbols.Add(ulong, ulong, ulong, string) thread safe
* Use a StringBuilder for MemoryOperand
* Add #if M_DEBUG guards
* Fix JMP_TABLE typo
* Fix using in Symbols
* Use Conditional("M_DEBUG") instead
Address gdkchan's feedback
* Use a struct instead of 4-tuple
Address gdkchan's feedback
* Place symbols in comments instead
Address gdkchan's feedback
* Use StringBuilder throughout
* Handle offsetted symbols
* Fix naming convention of Builder
* Avoid ArgumentException
* Remove unnecessary using
* Use switch expression instead
* Turn into a class
* Clean up
* Remove unnecessary using
* Implement a new physical memory manager and replace DeviceMemory
* Proper generic constraints
* Fix debug build
* Add memory tests
* New CPU memory manager and general code cleanup
* Remove host memory management from CPU project, use Ryujinx.Memory instead
* Fix tests
* Document exceptions on MemoryBlock
* Fix leak on unix memory allocation
* Proper disposal of some objects on tests
* Fix JitCache not being set as initialized
* GetRef without checks for 8-bits and 16-bits CAS
* Add MemoryBlock destructor
* Throw in separate method to improve codegen
* Address PR feedback
* QueryModified improvements
* Fix memory write tracking not marking all pages as modified in some cases
* Simplify MarkRegionAsModified
* Remove XML doc for ghost param
* Add back optimization to avoid useless buffer updates
* Add Ryujinx.Cpu project, move MemoryManager there and remove MemoryBlockWrapper
* Some nits
* Do not perform address translation when size is 0
* Address PR feedback and format NativeInterface class
* Remove ghost parameter description
* Update Ryujinx.Cpu to .NET Core 3.1
* Address PR feedback
* Fix build
* Return a well defined value for GetPhysicalAddress with invalid VA, and do not return unmapped ranges as modified
* Typo
* Start of JIT garbage collection improvements
- thread static pool for Operand, MemoryOperand, Operation
- Operands and Operations are always to be constructed via their static
helper classes, so they can be pooled.
- removing LinkedList from Node for sources/destinations (replaced with
List<>s for now, but probably could do arrays since size is bounded)
- removing params constructors from Node
- LinkedList<> to List<> with Clear() for Operand assignments/uses
- ThreadStaticPool is very simple and basically just exists for the
purpose of our specific translation allocation problem. Right now it
will stay at the worst case allocation count for that thread (so far) -
the pool can never shrink.
- Still some cases of Operand[] that haven't been removed yet. Will need
to evaluate them (eg. is there a reasonable max number of params for
Calls?)
* ConcurrentStack instead of ConcurrentQueue for Rejit
* Optimize some parts of LSRA
- BitMap now operates on 64-bit int rather than 32-bit
- BitMap is now pooled in a ThreadStatic pool (within lrsa)
- BitMap now is now its own iterator. Marginally speeds up iterating
through the bits.
- A few cases where enumerators were generated have been converted to
forms that generate less garbage.
- New data structure for sorting _usePositions in LiveIntervals. Much
faster split, NextUseAfter, initial insertion. Random insertion is
slightly slower.
- That last one is WIP since you need to insert the values backwards. It
would be ideal if it just flipped it for you, uncomplicating things on
the caller side.
* Use a static pool of thread static pools. (yes.)
Prevents each execution thread creating its own lowCq pool and making me cry.
* Move constant value to top, change naming convention.
* Fix iteration of memory operands.
* Increase max thread count.
* Address Feedback
* Implement Jump Table for Native Calls
NOTE: this slows down rejit considerably! Not recommended to be used
without codegen optimisation or AOT.
- Does not work on Linux
- A32 needs an additional commit.
* A32 Support
(WIP)
* Actually write Direct Call pointers to the table
That would help.
* Direct Calls: Rather than returning to the translator, attempt to keep within the native stack frame.
A return to the translator can still happen, but only by exceptionally
bubbling up to it.
Also:
- Always translate lowCq as a function. Faster interop with the direct
jumps, and this will be useful in future if we want to do speculative
translation.
- Tail Call Detection: after the decoding stage, detect if we do a tail
call, and avoid translating into it. Detected if a jump is made to an
address outwith the contiguous sequence of blocks surrounding the entry
point. The goal is to reduce code touched by jit and rejit.
* A32 Support
* Use smaller max function size for lowCq, fix exceptional returns
When a return has an unexpected value and there is no code block
following this one, we now return the value rather than continuing.
* CompareAndSwap (buggy)
* Ensure CompareAndSwap does not get optimized away.
* Use CompareAndSwap to make the dynamic table thread safe.
* Tail call for linux, throw on too many arguments.
* Combine CompareAndSwap 128 and 32/64.
They emit different IR instructions since their PreAllocator behaviour
is different, but now they just have one function on EmitterContext.
* Fix issues separating from optimisations.
* Use a stub to find and execute missing functions.
This allows us to skip doing many runtime comparisons and branches, and reduces the amount of code we need to emit significantly.
For the indirect call table, this stub also does the work of moving in the highCq address to the table when one is found.
* Make Jump Tables and Jit Cache dynmically resize
Reserve virtual memory, commit as needed.
* Move TailCallRemover to its own class.
* Multithreaded Translation (based on heuristic)
A poor one, at that. Need to get core count for a better one, which
means a lot of OS specific garbage.
* Better priority management for background threads.
* Bound core limit a bit more
Past a certain point the load is not paralellizable and starts stealing from the main thread. Likely due to GC, memory, heap allocation thread contention. Reduce by one core til optimisations come to improve the situation.
* Fix memory management on linux.
* Temporary solution to some sync problems.
This will make sure threads exit correctly, most of the time. There is a potential race where setting the sync counter to 0 does nothing (counter stays at what it was before, thread could take too long to exit), but we need to find a better way to do this anyways. Synchronization frequency has been tightened as we never enter blockwise segments of code. Essentially this means, check every x functions or loop iterations, before lowcq blocks existed and were worth just as much. Ideally it should be done in a better way, since functions can be anywhere from 1 to 5000 instructions. (maybe based on host timer, or an interrupt flag from a scheduler thread)
* Address feedback minus CompareAndSwap change.
* Use default ReservedRegion granularity.
* Merge CompareAndSwap with its V128 variant.
* We already got the source, no need to do it again.
* Make sure all background translation threads exit.
* Fix CompareAndSwap128
Detection criteria was a bit scuffed.
* Address Comments.
* Implement TEQ and MOV (Imm16)
* Initial work on A32 instructions + SVC. No tests yet, hangs in rtld.
* Implement CLZ, fix BFI and BFC
Now stops on SIMD initialization.
* Exclusive access instructions, fix to mul, system instructions.
Now gets to a break after SignalProcessWideKey64.
* Better impl of UBFX, add UDIV and SDIV
Now boots way further - now stuck on VMOV instruction.
* Many more instructions, start on SIMD and testing framework.
* Fix build issues
* svc: Rework 32 bit codepath
Fixing once and for all argument ordering issues.
* Fix 32 bits stacktrace
* hle debug: Add 32 bits dynamic section parsing
* Fix highCq mode, add many tests, fix some instruction bugs
Still suffers from critical malloc failure 😩
* Fix incorrect opcode decoders and a few more instructions.
* Add a few instructions and fix others. re-disable highCq for now.
Disabled the svc memory clear since i'm not sure about it.
* Fix build
* Fix typo in ordered/exclusive stores.
* Implement some more instructions, fix others.
Uxtab16/Sxtab16 are untested.
* Begin impl of pairwise, some other instructions.
* Add a few more instructions, a quick hack to fix svcs for now.
* Add tests and fix issues with VTRN, VZIP, VUZP
* Add a few more instructions, fix Vmul_1 encoding.
* Fix way too many instruction bugs, add tests for some of the more important ones.
* Fix HighCq, enable FastFP paths for some floating point instructions
(not entirely sure why these were disabled, so important to note this
commit exists)
Branching has been removed in A32 shifts until I figure out if it's
worth it
* Cleanup Part 1
There should be no functional change between these next few commits.
Should is the key word. (except for removing break handler)
* Implement 32 bits syscalls
Co-authored-by: riperiperi <rhy3756547@hotmail.com>
Implement all 32 bits counterparts of the 64 bits syscalls we currently
have.
* Refactor part 2: Move index/subindex logic to Operand
May have inadvertently fixed one (1) bug
* Add FlushProcessDataCache32
* Address jd's comments
* Remove 16 bit encodings from OpCodeTable
Still need to catch some edge cases (operands that use the "F" flag) and
make Q encodings with non-even indexes undefined.
* Correct Fpscr handling for FP vector slow paths
WIP
* Add StandardFPSCRValue behaviour for all Arithmetic instructions
* Add StandardFPSCRValue behaviour to compare instructions.
* Force passing of fpcr to FPProcessException and FPUnpack.
Reduces potential for code error significantly
* OpCode cleanup
* Remove urgency from DMB comment in MRRC
DMB is currently a no-op via the instruction, so it should likely still
be a no-op here.
* Test Cleanup
* Fix FPDefaultNaN on Ryzen CPUs
* Improve some tests, fix some shift instructions, add slow path for Vadd
* Fix Typo
* More test cleanup
* Flip order of Fx and index, to indicate that the operand's is the "base"
* Remove Simd32 register type, use Int32 and Int64 for scalars like A64 does.
* Reintroduce alignment to DecoderHelper (removed by accident)
* One more realign as reading diffs is hard
* Use I32 registers in A32 (part 2)
Swap default integer register type based on current execution mode.
* FPSCR flags as Registers (part 1)
Still need to change NativeContext and ExecutionContext to allow
getting/setting with the flag values.
* Use I32 registers in A32 (part 1)
* FPSCR flags as registers (part 2)
Only CMP flags are on the registers right now. It could be useful to use
more of the space in non-fast-float when implementing A32 flags
accurately in the fast path.
* Address Feedback
* Correct FP->Int behaviour (should saturate)
* Make branches made by writing to PC eligible for Rejit
Greatly improves performance in most games.
* Remove unused branching for Vtbl
* RejitRequest as a class rather than a tuple
Makes a lot more sense than storing tuples on a dictionary.
* Add VMOVN, VSHR (imm), VSHRN (imm) and related tests
* Re-order InstEmitSystem32
Alphabetical sorting.
* Address Feedback
Feedback from Ac_K, remove and sort usings.
* Address Feedback 2
* Address Feedback from LDj3SNuD
Opcode table reordered to have alphabetical sorting within groups,
Vmaxnm and Vminnm have split names to be less ambiguous, SoftFloat nits,
Test nits and Test simplification with ValueSource.
* Add Debug Asserts to A32 helpers
Mainly to prevent the shift ones from being used on I64 operands, as
they expect I32 input for most operations (eg. carry flag setting), and
expect I32 input for shift and boolean amounts. Most other helper
functions don't take Operands, throw on out of range values, and take
specific types of OpCode, so didn't need any asserts.
* Use ConstF rather than creating an operand.
(useful for pooling in future)
* Move exclusive load to helper, reference call flag rather than literal 1.
* Address LDj feedback (minus table flatten)
one final look before it's all gone. the world is so beautiful.
* Flatten OpCodeTable
oh no
* Address more table ordering
* Call Flag as int on A32
Co-authored-by: Natalie C. <cyuubiapps@gmail.com>
Co-authored-by: Thog <thog@protonmail.com>
* Start of the ARMeilleure project
* Refactoring around the old IRAdapter, now renamed to PreAllocator
* Optimize the LowestBitSet method
* Add CLZ support and fix CLS implementation
* Add missing Equals and GetHashCode overrides on some structs, misc small tweaks
* Implement the ByteSwap IR instruction, and some refactoring on the assembler
* Implement the DivideUI IR instruction and fix 64-bits IDIV
* Correct constant operand type on CSINC
* Move division instructions implementation to InstEmitDiv
* Fix destination type for the ConditionalSelect IR instruction
* Implement UMULH and SMULH, with new IR instructions
* Fix some issues with shift instructions
* Fix constant types for BFM instructions
* Fix up new tests using the new V128 struct
* Update tests
* Move DIV tests to a separate file
* Add support for calls, and some instructions that depends on them
* Start adding support for SIMD & FP types, along with some of the related ARM instructions
* Fix some typos and the divide instruction with FP operands
* Fix wrong method call on Clz_V
* Implement ARM FP & SIMD move instructions, Saddlv_V, and misc. fixes
* Implement SIMD logical instructions and more misc. fixes
* Fix PSRAD x86 instruction encoding, TRN, UABD and UABDL implementations
* Implement float conversion instruction, merge in LDj3SNuD fixes, and some other misc. fixes
* Implement SIMD shift instruction and fix Dup_V
* Add SCVTF and UCVTF (vector, fixed-point) variants to the opcode table
* Fix check with tolerance on tester
* Implement FP & SIMD comparison instructions, and some fixes
* Update FCVT (Scalar) encoding on the table to support the Half-float variants
* Support passing V128 structs, some cleanup on the register allocator, merge LDj3SNuD fixes
* Use old memory access methods, made a start on SIMD memory insts support, some fixes
* Fix float constant passed to functions, save and restore non-volatile XMM registers, other fixes
* Fix arguments count with struct return values, other fixes
* More instructions
* Misc. fixes and integrate LDj3SNuD fixes
* Update tests
* Add a faster linear scan allocator, unwinding support on windows, and other changes
* Update Ryujinx.HLE
* Update Ryujinx.Graphics
* Fix V128 return pointer passing, RCX is clobbered
* Update Ryujinx.Tests
* Update ITimeZoneService
* Stop using GetFunctionPointer as that can't be called from native code, misc. fixes and tweaks
* Use generic GetFunctionPointerForDelegate method and other tweaks
* Some refactoring on the code generator, assert on invalid operations and use a separate enum for intrinsics
* Remove some unused code on the assembler
* Fix REX.W prefix regression on float conversion instructions, add some sort of profiler
* Add hardware capability detection
* Fix regression on Sha1h and revert Fcm** changes
* Add SSE2-only paths on vector extract and insert, some refactoring on the pre-allocator
* Fix silly mistake introduced on last commit on CpuId
* Generate inline stack probes when the stack allocation is too large
* Initial support for the System-V ABI
* Support multiple destination operands
* Fix SSE2 VectorInsert8 path, and other fixes
* Change placement of XMM callee save and restore code to match other compilers
* Rename Dest to Destination and Inst to Instruction
* Fix a regression related to calls and the V128 type
* Add an extra space on comments to match code style
* Some refactoring
* Fix vector insert FP32 SSE2 path
* Port over the ARM32 instructions
* Avoid memory protection races on JIT Cache
* Another fix on VectorInsert FP32 (thanks to LDj3SNuD
* Float operands don't need to use the same register when VEX is supported
* Add a new register allocator, higher quality code for hot code (tier up), and other tweaks
* Some nits, small improvements on the pre allocator
* CpuThreadState is gone
* Allow changing CPU emulators with a config entry
* Add runtime identifiers on the ARMeilleure project
* Allow switching between CPUs through a config entry (pt. 2)
* Change win10-x64 to win-x64 on projects
* Update the Ryujinx project to use ARMeilleure
* Ensure that the selected register is valid on the hybrid allocator
* Allow exiting on returns to 0 (should fix test regression)
* Remove register assignments for most used variables on the hybrid allocator
* Do not use fixed registers as spill temp
* Add missing namespace and remove unneeded using
* Address PR feedback
* Fix types, etc
* Enable AssumeStrictAbiCompliance by default
* Ensure that Spill and Fill don't load or store any more than necessary
