TegraExplorer/source/hid/joycon.c

/*
 * Joy-Con UART driver for Nintendo Switch
 *
 * Copyright (c) 2019 CTCaer
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <string.h>

#include "joycon.h"
#include "../gfx/gfx.h"
#include "../power/max17050.h"
#include "../power/regulator_5v.h"
#include "../soc/bpmp.h"
#include "../soc/clock.h"
#include "../soc/gpio.h"
#include "../soc/pinmux.h"
#include "../soc/uart.h"
#include "../soc/t210.h"
#include "../utils/util.h"

// For disabling driver when logging is enabled.
// #include "../libs/lvgl/lvgl.h"

#define JC_WIRED_CMD        0x91
#define JC_WIRED_HID        0x92
#define JC_WIRED_INIT_REPLY 0x94
#define JC_INIT_HANDSHAKE   0xA5

#define JC_WIRED_CMD_MAC 0x01
#define JC_WIRED_CMD_10  0x10

#define JC_HID_OUTPUT_RPT 0x01
#define JC_HID_RUMBLE_RPT 0x10

#define JC_HID_INPUT_RPT  0x30
#define JC_HID_SUBMCD_RPT 0x21

#define JC_HID_SUBCMD_HCI_STATE  0x06
#define  HCI_STATE_SLEEP     0x00
#define  HCI_STATE_RECONNECT 0x01
#define  HCI_STATE_PAIR      0x02
#define  HCI_STATE_HOME      0x04
#define JC_HID_SUBCMD_SPI_READ   0x10
#define JC_HID_SUBCMD_RUMBLE_CTL 0x48
#define JC_HID_SUBCMD_SND_RUMBLE 0xFF

#define JC_BTN_MASK_L 0xFF2900 // 0xFFE900: with charge status.
#define JC_BTN_MASK_R 0x76FF

#define JC_ID_L 1
#define JC_ID_R 2

enum
{
	JC_BATT_EMTPY = 0,
	JC_BATT_CRIT  = 2,
	JC_BATT_LOW   = 4,
	JC_BATT_MID   = 6,
	JC_BATT_FULL  = 8
};

static const u8 init_jc[] = {
	0xA1, 0xA2, 0xA3, 0xA4
};

static const u8 init_handshake[] = {
	0x19, 0x01, 0x03, 0x07, 0x00,      // Uart header.
	JC_INIT_HANDSHAKE, 0x02,           // Wired cmd and wired subcmd.
	0x01, 0x7E, 0x00, 0x00, 0x00       // Wired subcmd data.
};

static const u8 init_get_info[]  = {
	0x19, 0x01, 0x03, 0x07, 0x00,      // Uart header.
	JC_WIRED_CMD, JC_WIRED_CMD_MAC,    // Wired cmd and subcmd.
	0x00, 0x00, 0x00, 0x00, 0x24       // Wired subcmd data.
};

static const u8 init_finilize[]  = {
	0x19, 0x01, 0x03, 0x07, 0x00,      // Uart header.
	JC_WIRED_CMD, JC_WIRED_CMD_10,     // Wired cmd and subcmd.
	0x00, 0x00, 0x00, 0x00, 0x3D       // Wired subcmd data.
};

static const u8 nx_pad_status[]  = {
	0x19, 0x01, 0x03, 0x08, 0x00,      // Uart header.
	JC_WIRED_HID, 0x00,                // Wired cmd and hid cmd.
	0x01, 0x00, 0x00, 0x69, 0x2D, 0x1F // hid data.
};

typedef struct _jc_uart_hdr_t
{
	u8 magic[3];
	u8 total_size_lsb;
	u8 total_size_msb;
} jc_uart_hdr_t;

typedef struct _jc_wired_hdr_t
{
	jc_uart_hdr_t uart_hdr;
	u8 cmd;
	u8 data[5];
	u8 crc;
	u8 payload[];
} jc_wired_hdr_t;

typedef struct _jc_hid_out_rpt_t
{
	u8 cmd;
	u8 pkt_id;
	u8 rumble[8];
	u8 subcmd;
	u8 subcmd_data[];
} jc_hid_out_rpt_t;

typedef struct _jc_hid_out_spi_read_t
{
	u32 addr;
	u8  size;
} jc_hid_out_spi_read_t;

typedef struct _jc_hid_in_rpt_t
{
	u8 cmd;
	u8 pkt_id;
	u8 conn_info:4;
	u8 batt_info:4;
	u8 btn_right;
	u8 btn_shared;
	u8 btn_left;
	u8 stick_h_left;
	u8 stick_m_left;
	u8 stick_v_left;
	u8 stick_h_right;
	u8 stick_m_right;
	u8 stick_v_right;
	u8 vib_decider;
	u8 submcd_ack;
	u8 subcmd;
	u8 subcmd_data[];
} jc_hid_in_rpt_t;

typedef struct _jc_hid_in_spi_read_t
{
	u32 addr;
	u8  size;
	u8  data[];
} jc_hid_in_spi_read_t;

typedef struct _jc_hid_in_pair_data_t
{
	u8  magic;
	u8  size;
	u16 checksum;
	u8  mac[6];
	u8  ltk[16];
	u8  pad0[10];
	u8  bt_caps; // bit3: Secure conn supported host, bit5: Paired to TBFC supported host, bit6: iTBFC page supported
	u8  pad1;
} jc_hid_in_pair_data_t;

typedef struct _joycon_ctxt_t
{
	u8 buf[0x100]; //FIXME: If heap is used, dumping breaks.
	u8 uart;
	u8 type;
	u8 mac[6];
	u32 hw_init_done;
	u32 last_received_time;
	u32 last_status_req_time;
	u8 rumble_sent;
	u8 connected;
} joycon_ctxt_t;

static joycon_ctxt_t jc_l;
static joycon_ctxt_t jc_r;

static bool jc_init_done = false;
static u32 hid_pkt_inc = 0;

static jc_gamepad_rpt_t jc_gamepad;

void jc_power_supply(u8 uart, bool enable);

void joycon_send_raw(u8 uart_port, const u8 *buf, u16 size)
{
	uart_send(uart_port, buf, size);
	uart_wait_idle(uart_port, UART_TX_IDLE);
}

static u16 jc_packet_add_uart_hdr(jc_wired_hdr_t *out, u8 wired_cmd, u8 *data, u16 size)
{
	out->uart_hdr.magic[0] = 0x19;
	out->uart_hdr.magic[1] = 0x01;
	out->uart_hdr.magic[2] = 0x3;

	out->uart_hdr.total_size_lsb = 7;
	out->uart_hdr.total_size_msb = 0;
	out->cmd = wired_cmd;

	if (data)
		memcpy(out->data, data, size);

	out->crc = 0; // wired crc8ccit can be skipped.

	return sizeof(jc_wired_hdr_t);
}

static u16 jc_hid_output_rpt_craft(jc_wired_hdr_t *rpt, u8 *payload, u16 size)
{
	u16 pkt_size = jc_packet_add_uart_hdr(rpt, JC_WIRED_HID, NULL, 0);
	pkt_size += size;

	rpt->uart_hdr.total_size_lsb += size;
	rpt->data[0] = size >> 8;
	rpt->data[1] = size & 0xFF;

	if (payload)
		memcpy(rpt->payload, payload, size);

	return pkt_size;
}

void jc_send_hid_output_rpt(u8 uart, u8 *payload, u16 size)
{
	u8 rpt[0x50];
	memset(rpt, 0, sizeof(rpt));

	u32 rpt_size = jc_hid_output_rpt_craft((jc_wired_hdr_t *)rpt, payload, size);

	joycon_send_raw(uart, rpt, rpt_size);
}

static u8 jc_hid_pkt_id_incr()
{
	u8 curr_id = hid_pkt_inc;
	hid_pkt_inc++;

	return (curr_id & 0xF);
}

void jc_send_hid_cmd(u8 uart, u8 subcmd, u8 *data, u16 size)
{
	u8 temp[0x30];
	u8 rumble_neutral[8] = {0x00, 0x01, 0x40, 0x40, 0x00, 0x01, 0x40, 0x40};
	u8 rumble_init[8]    = {0xc2, 0xc8, 0x03, 0x72, 0xc2, 0xc8, 0x03, 0x72};

	memset(temp, 0, sizeof(temp));

	jc_hid_out_rpt_t *hid_pkt = (jc_hid_out_rpt_t *)temp;

	memcpy(hid_pkt->rumble, rumble_neutral, sizeof(rumble_neutral));

	if (subcmd == JC_HID_SUBCMD_SND_RUMBLE)
	{
		bool send_r_rumble = jc_r.connected && !jc_r.rumble_sent;
		bool send_l_rumble = jc_l.connected && !jc_l.rumble_sent;

		// Enable rumble.
		hid_pkt->cmd = JC_HID_OUTPUT_RPT;
		hid_pkt->pkt_id = jc_hid_pkt_id_incr();
		hid_pkt->subcmd = JC_HID_SUBCMD_RUMBLE_CTL;
		hid_pkt->subcmd_data[0] = 1;
		if (send_r_rumble)
			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, 0x10);
		if (send_l_rumble)
			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, 0x10);

		// Send rumble.
		hid_pkt->cmd = JC_HID_RUMBLE_RPT;
		hid_pkt->pkt_id = jc_hid_pkt_id_incr();
		memcpy(hid_pkt->rumble, rumble_init, sizeof(rumble_init));
		if (send_r_rumble)
			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, 10);
		if (send_l_rumble)
			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, 10);

		msleep(15);

		// Disable rumble.
		hid_pkt->cmd = JC_HID_OUTPUT_RPT;
		hid_pkt->pkt_id = jc_hid_pkt_id_incr();
		hid_pkt->subcmd = JC_HID_SUBCMD_RUMBLE_CTL;
		hid_pkt->subcmd_data[0] = 0;
		memcpy(hid_pkt->rumble, rumble_neutral, sizeof(rumble_neutral));
		if (send_r_rumble)
			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, 0x10);
		if (send_l_rumble)
			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, 0x10);
	}
	else
	{
		hid_pkt->cmd = JC_HID_OUTPUT_RPT;
		hid_pkt->pkt_id = jc_hid_pkt_id_incr();
		hid_pkt->subcmd = subcmd;
		if (data)
			memcpy(hid_pkt->subcmd_data, data, size);

		u8 pkt_size = sizeof(jc_hid_out_rpt_t) + size;

		if (subcmd != JC_HID_SUBCMD_SPI_READ)
			jc_send_hid_output_rpt(uart, (u8 *)hid_pkt, pkt_size);
		else
		{
			jc_send_hid_output_rpt(UART_B, (u8 *)hid_pkt, pkt_size);
			jc_send_hid_output_rpt(UART_C, (u8 *)hid_pkt, pkt_size);
		}
	}
}

static void jc_charging_decider(u8 batt, u8 uart)
{
	u32 system_batt_enough = max17050_get_cached_batt_volt() > 4000;

	// Power supply control based on battery levels and charging.
	if ((batt >> 1 << 1) < JC_BATT_LOW) // Level without checking charging.
		jc_power_supply(uart, true);
	else if (batt > (system_batt_enough ? JC_BATT_FULL : JC_BATT_MID)) // Addresses the charging bit.
		jc_power_supply(uart, false);
}

static void jc_parse_wired_hid(joycon_ctxt_t *jc, const u8* packet, u32 size)
{
	u32 btn_tmp;
	jc_hid_in_rpt_t *hid_pkt = (jc_hid_in_rpt_t *)packet;

	switch (hid_pkt->cmd)
	{
	case JC_HID_INPUT_RPT:
		btn_tmp = hid_pkt->btn_right | hid_pkt->btn_shared << 8 | hid_pkt->btn_left << 16;

		if (jc->type & JC_ID_L)
		{
			jc_gamepad.buttons &= ~JC_BTN_MASK_L;
			jc_gamepad.buttons |= (btn_tmp & JC_BTN_MASK_L);

			jc_gamepad.lstick_x = hid_pkt->stick_h_left | ((hid_pkt->stick_m_left & 0xF) << 8);
			jc_gamepad.lstick_y = (hid_pkt->stick_m_left >> 4) | (hid_pkt->stick_v_left << 4);

			jc_gamepad.batt_info_l = hid_pkt->batt_info;
		}
		else if (jc->type & JC_ID_R)
		{
			jc_gamepad.buttons &= ~JC_BTN_MASK_R;
			jc_gamepad.buttons |= (btn_tmp & JC_BTN_MASK_R);

			jc_gamepad.rstick_x = hid_pkt->stick_h_right | ((hid_pkt->stick_m_right & 0xF) << 8);
			jc_gamepad.rstick_y = (hid_pkt->stick_m_right >> 4) | (hid_pkt->stick_v_right << 4);

			jc_gamepad.batt_info_r = hid_pkt->batt_info;
		}

		jc_gamepad.conn_l = jc_l.connected;
		jc_gamepad.conn_r = jc_r.connected;

		jc_charging_decider(hid_pkt->batt_info, jc->uart);
		break;
	case JC_HID_SUBMCD_RPT:
		if (hid_pkt->subcmd == JC_HID_SUBCMD_SPI_READ)
		{
			jc_bt_conn_t *bt_conn;

			if (jc->type & JC_ID_L)
				bt_conn = &jc_gamepad.bt_conn_l;
			else
				bt_conn = &jc_gamepad.bt_conn_r;

			jc_hid_in_spi_read_t  *spi_info = (jc_hid_in_spi_read_t *)hid_pkt->subcmd_data;
			jc_hid_in_pair_data_t *pair_data = (jc_hid_in_pair_data_t *)spi_info->data;

			// Check if we reply is pairing info.
			if (spi_info->addr == 0x2000 && spi_info->size == 0x1A && pair_data->magic == 0x95)
			{
				bt_conn->type = jc->type;

				memcpy(bt_conn->mac, jc->mac, 6);
				memcpy(bt_conn->host_mac, pair_data->mac, 6);
				for (u32 i = 16; i > 0; i--)
					bt_conn->ltk[16 - i] = pair_data->ltk[i - 1];
			}
		}
		break;
	default:
		break;
	}
	jc->last_received_time = get_tmr_ms();
}

static void jc_parse_wired_init(joycon_ctxt_t *jc, const u8* data, u32 size)
{
	switch (data[0])
	{
	case JC_WIRED_CMD_MAC:
		for (int i = 12; i > 6; i--)
			jc->mac[12 - i] = data[i];
		jc->type = data[6];
		jc->connected = true;
	default:
		break;
	}
}

static void jc_uart_pkt_parse(joycon_ctxt_t *jc, const u8* packet, size_t size)
{
	jc_wired_hdr_t *pkt = (jc_wired_hdr_t *)packet;
	switch (pkt->cmd)
	{
	case JC_WIRED_HID:
		jc_parse_wired_hid(jc, pkt->payload, (pkt->data[0] << 8) | pkt->data[1]);
		break;
	case JC_WIRED_INIT_REPLY:
		jc_parse_wired_init(jc, pkt->data, size - sizeof(jc_uart_hdr_t) - 1);
		break;
	default:
		break;
	}
}

static void jc_rcv_pkt(joycon_ctxt_t *jc)
{
	if (gpio_read(GPIO_PORT_E, GPIO_PIN_6) && jc->uart == UART_C)
		return;
	else if (gpio_read(GPIO_PORT_H, GPIO_PIN_6) && jc->uart == UART_B)
		return;

	// Check if device stopped sending data.
	u32 uart_irq = uart_get_IIR(jc->uart);
	if ((uart_irq & 0x8) != 0x8)
		return;

	u32 len = uart_recv(jc->uart, (u8 *)jc->buf, 0);

	// Check valid size and uart reply magic.
	if (len > 7 && !memcmp(jc->buf, "\x19\x81\x03", 3))
	{
		jc_wired_hdr_t *pkt = (jc_wired_hdr_t *)(jc->buf);

		jc_uart_pkt_parse(jc, jc->buf, pkt->uart_hdr.total_size_lsb + sizeof(jc_uart_hdr_t));
	}
}

static bool jc_send_init_rumble(joycon_ctxt_t *jc)
{
	// Send init rumble or request nx pad status report.
	if ((jc_r.connected && !jc_r.rumble_sent) || (jc_l.connected && !jc_l.rumble_sent))
	{
		gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_SPIO);
		gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_SPIO);

		jc_send_hid_cmd(jc->uart, JC_HID_SUBCMD_SND_RUMBLE, NULL, 0);

		if (jc_l.connected)
			jc_l.rumble_sent = true;
		if (jc_r.connected)
			jc_r.rumble_sent = true;

		if (jc->uart != UART_B)
			gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_GPIO);
		else
			gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_GPIO);

		return 1;
	}

	return 0;
}

static void jc_req_nx_pad_status(joycon_ctxt_t *jc)
{
	bool sent_rumble = jc_send_init_rumble(jc);

	if (sent_rumble)
		return;

	if (jc->last_status_req_time > get_tmr_ms() || !jc->connected)
		return;

	// Turn off Joy-Con detect.
	if (jc->uart == UART_B)
		gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_SPIO);
	else
		gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_SPIO);

	joycon_send_raw(jc->uart, nx_pad_status, sizeof(nx_pad_status));

	// Turn Joy-Con detect on.
	if (jc->uart == UART_B)
		gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_GPIO);
	else
		gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_GPIO);

	jc->last_status_req_time = get_tmr_ms() + 15;
}

jc_gamepad_rpt_t *jc_get_bt_pairing_info()
{
	u8 retries;
	jc_bt_conn_t *bt_conn;

	bt_conn = &jc_gamepad.bt_conn_l;
	memset(bt_conn->host_mac, 0, 6);
	memset(bt_conn->ltk, 0, 16);

	bt_conn = &jc_gamepad.bt_conn_r;
	memset(bt_conn->host_mac, 0, 6);
	memset(bt_conn->ltk, 0, 16);

	while (jc_l.last_status_req_time > get_tmr_ms())
	{
		jc_rcv_pkt(&jc_r);
		jc_rcv_pkt(&jc_l);
	}

	jc_hid_in_spi_read_t subcmd_data;
	subcmd_data.addr = 0x2000;
	subcmd_data.size = 0x1A;

	// Turn off Joy-Con detect.
	gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_SPIO);
	gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_SPIO);

	bool jc_r_found = jc_r.connected ? false : true;
	bool jc_l_found = jc_l.connected ? false : true;

	u32 total_retries = 5;
retry:
	retries = 10;
	while (retries)
	{
		if (jc_l.last_status_req_time < get_tmr_ms())
		{
			jc_send_hid_cmd(0, JC_HID_SUBCMD_SPI_READ, (u8 *)&subcmd_data, 5);
			jc_l.last_status_req_time = get_tmr_ms() + 15;
			jc_r.last_status_req_time = get_tmr_ms() + 15;
			retries--;
		}

		if (!jc_r_found)
		{
			memset(jc_r.buf, 0, 0x100);
			jc_rcv_pkt(&jc_r);
		}

		if (!jc_l_found)
		{
			memset(jc_l.buf, 0, 0x100);
			jc_rcv_pkt(&jc_l);
		}
	}

	if (jc_l.connected &&
		memcmp(&jc_gamepad.bt_conn_l.ltk[0], "\x00\x00\x00\x00", 4) &&
		memcmp(&jc_gamepad.bt_conn_l.ltk[8], "\x00\x00\x00\x00", 4))
		jc_l_found = true;

	if (jc_r.connected &&
		memcmp(&jc_gamepad.bt_conn_r.ltk[0], "\x00\x00\x00\x00", 4) &&
		memcmp(&jc_gamepad.bt_conn_r.ltk[8], "\x00\x00\x00\x00", 4))
		jc_r_found = true;

	if (total_retries && (!jc_l_found || !jc_r_found))
	{
		total_retries--;
		goto retry;
	}

	// Turn Joy-Con detect on.
	gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_GPIO);
	gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_GPIO);

	return &jc_gamepad;
}

void jc_deinit()
{
	gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_SPIO);
	gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_SPIO);

	u8 data = HCI_STATE_SLEEP;

	if (jc_r.connected)
	{
		jc_send_hid_cmd(UART_B, JC_HID_SUBCMD_HCI_STATE, &data, 1);
		msleep(1);
		jc_rcv_pkt(&jc_r);
	}
	if (jc_l.connected)
	{
		jc_send_hid_cmd(UART_C, JC_HID_SUBCMD_HCI_STATE, &data, 1);
		msleep(1);
		jc_rcv_pkt(&jc_l);
	}

	jc_power_supply(UART_B, false);
	jc_power_supply(UART_C, false);
}

static void jc_init_conn(joycon_ctxt_t *jc)
{
	if (((u32)get_tmr_ms() - jc->last_received_time) > 1000)
	{
		jc_power_supply(jc->uart, true);

		// Turn off Joy-Con detect.
		if (jc->uart == UART_B)
		{
			jc_gamepad.buttons &= ~JC_BTN_MASK_R;
			jc_gamepad.conn_r = false;
			gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_SPIO);
		}
		else
		{
			jc_gamepad.buttons &= ~JC_BTN_MASK_L;
			jc_gamepad.conn_l = false;
			gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_SPIO);
		}

		uart_init(jc->uart, 1000000);
		uart_invert(jc->uart, true, UART_INVERT_TXD);
		uart_set_IIR(jc->uart);

		joycon_send_raw(jc->uart, init_jc, 4);
		joycon_send_raw(jc->uart, init_handshake, sizeof(init_handshake));

		msleep(5);
		jc_rcv_pkt(jc);

		joycon_send_raw(jc->uart, init_get_info, sizeof(init_get_info));
		msleep(5);
		jc_rcv_pkt(jc);

		joycon_send_raw(jc->uart, init_finilize, sizeof(init_finilize));
		msleep(5);
		jc_rcv_pkt(jc);

		// Turn Joy-Con detect on.
		if (jc->uart == UART_B)
			gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_GPIO);
		else
			gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_GPIO);

		jc->last_received_time = get_tmr_ms();

		if (jc->connected)
			jc_power_supply(jc->uart, false);
	}
}

static void jc_conn_check()
{
	// Check if a Joy-Con was disconnected.
	if (gpio_read(GPIO_PORT_E, GPIO_PIN_6))
	{
		jc_power_supply(UART_C, false);

		hid_pkt_inc = 0;

		jc_l.connected = false;
		jc_l.rumble_sent = false;

		jc_gamepad.buttons &= ~JC_BTN_MASK_L;
		jc_gamepad.conn_l = false;

		jc_gamepad.batt_info_l = 0;
		jc_gamepad.bt_conn_l.type = 0;
	}

	if (gpio_read(GPIO_PORT_H, GPIO_PIN_6))
	{
		jc_power_supply(UART_B, false);

		hid_pkt_inc = 0;

		jc_r.connected = false;
		jc_r.rumble_sent = false;

		jc_gamepad.buttons &= ~JC_BTN_MASK_R;
		jc_gamepad.conn_r = false;

		jc_gamepad.batt_info_r = 0;
		jc_gamepad.bt_conn_r.type = 0;
	}
}

void jc_power_supply(u8 uart, bool enable)
{
	if (enable)
	{
		if (regulator_get_5v_dev_enabled(1 << uart))
			return;

		regulator_enable_5v(1 << uart);

		if (jc_init_done)
		{
			if (uart == UART_C)
				gpio_write(GPIO_PORT_CC, GPIO_PIN_3, GPIO_HIGH);
			else
				gpio_write(GPIO_PORT_K, GPIO_PIN_3, GPIO_HIGH);
			return;
		}

		if (uart == UART_C)
		{
			// Joy-Con(L) Charge Detect.
			PINMUX_AUX(PINMUX_AUX_SPDIF_IN) = PINMUX_PULL_DOWN | 1;
			gpio_config(GPIO_PORT_CC, GPIO_PIN_3, GPIO_MODE_GPIO);
			gpio_output_enable(GPIO_PORT_CC, GPIO_PIN_3, GPIO_OUTPUT_ENABLE);
			gpio_write(GPIO_PORT_CC, GPIO_PIN_3, GPIO_HIGH);
		}
		else
		{
			// Joy-Con(R) Charge Detect.
			PINMUX_AUX(PINMUX_AUX_GPIO_PK3) = PINMUX_DRIVE_4X | PINMUX_PULL_DOWN | 2;
			gpio_config(GPIO_PORT_K, GPIO_PIN_3, GPIO_MODE_GPIO);
			gpio_output_enable(GPIO_PORT_K, GPIO_PIN_3, GPIO_OUTPUT_ENABLE);
			gpio_write(GPIO_PORT_K, GPIO_PIN_3, GPIO_HIGH);
		}
	}
	else
	{
		if (!regulator_get_5v_dev_enabled(1 << uart))
			return;

		regulator_disable_5v(1 << uart);

		if (uart == UART_C)
			gpio_write(GPIO_PORT_CC, GPIO_PIN_3, GPIO_LOW);
		else
			gpio_write(GPIO_PORT_K, GPIO_PIN_3, GPIO_LOW);
	}
}

void jc_init_hw()
{
	jc_l.uart = UART_C;
	jc_r.uart = UART_B;

#if (LV_LOG_PRINTF != 1)
	jc_power_supply(UART_C, true);
	jc_power_supply(UART_B, true);

	// Joy-Con (R) IsAttached.
	PINMUX_AUX(PINMUX_AUX_GPIO_PH6) = PINMUX_INPUT_ENABLE | PINMUX_TRISTATE;
	gpio_config(GPIO_PORT_H, GPIO_PIN_6, GPIO_MODE_GPIO);

	// Joy-Con (L) IsAttached.
	PINMUX_AUX(PINMUX_AUX_GPIO_PE6) = PINMUX_INPUT_ENABLE | PINMUX_TRISTATE;
	gpio_config(GPIO_PORT_E, GPIO_PIN_6, GPIO_MODE_GPIO);

	// Configure pinmuxing for UART B and C.
	pinmux_config_uart(UART_B);
	pinmux_config_uart(UART_C);

	// Ease the stress to APB.
	bpmp_clk_rate_set(BPMP_CLK_NORMAL);

	// Enable UART B and C clocks.
	clock_enable_uart(UART_B);
	clock_enable_uart(UART_C);

	// Restore OC.
	bpmp_clk_rate_set(BPMP_CLK_DEFAULT_BOOST);

	// Turn Joy-Con detect on.
	gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_GPIO);
	gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_GPIO);

	jc_init_done = true;
#endif
}

jc_gamepad_rpt_t *joycon_poll()
{
	if (!jc_init_done)
		return NULL;

	if (!gpio_read(GPIO_PORT_H, GPIO_PIN_6))
		jc_init_conn(&jc_r);
	if (!gpio_read(GPIO_PORT_E, GPIO_PIN_6))
		jc_init_conn(&jc_l);

	if (!gpio_read(GPIO_PORT_H, GPIO_PIN_6))
		jc_req_nx_pad_status(&jc_r);
	if (!gpio_read(GPIO_PORT_E, GPIO_PIN_6))
		jc_req_nx_pad_status(&jc_l);

	if (!gpio_read(GPIO_PORT_H, GPIO_PIN_6))
		jc_rcv_pkt(&jc_r);
	if (!gpio_read(GPIO_PORT_E, GPIO_PIN_6))
		jc_rcv_pkt(&jc_l);

	jc_conn_check();

	return &jc_gamepad;
}