mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-22 18:06:40 +00:00
Code Issues Releases Activity

bdk: reg 5v: fix a hang with T210B01 and Hoag/Aula

Browse source 
- Hoag and Aula do not have a USB based 5V bus source, so do not touch CC4 pin.

- More importantly, in T210B01 the GPIO AO IO rail seems to be working properly from boot.
Plus it also seems that is needed by various components.

That was found when running on Aula. It was causing an immediate hang. Probably SoC wide.

Only allow control of it on T210 to avoid such issues.
This commit is contained in:
CTCaer 2021-10-15 16:26:11 +03:00
parent 9a17ca2628
commit 31d6c7d85d
1 changed files with 50 additions and 18 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

68
bdk/power/regulator_5v.c
View file

@ -1,5 +1,5 @@
/*
* Copyright (c) 2019 CTCaer
* Copyright (c) 2019-2021 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -14,7 +14,9 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <soc/fuse.h>
#include <soc/gpio.h>
#include <soc/hw_init.h>
#include <soc/pinmux.h>
#include <soc/pmc.h>
#include <soc/t210.h>
@ -34,17 +36,30 @@ void regulator_5v_enable(u8 dev)
gpio_output_enable(GPIO_PORT_A, GPIO_PIN_5, GPIO_OUTPUT_ENABLE);
gpio_write(GPIO_PORT_A, GPIO_PIN_5, GPIO_HIGH);
// Fan and Rail power from USB 5V VBUS.
PINMUX_AUX(PINMUX_AUX_USB_VBUS_EN0) = PINMUX_LPDR | 1;
gpio_config(GPIO_PORT_CC, GPIO_PIN_4, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_CC, GPIO_PIN_4, GPIO_OUTPUT_ENABLE);
gpio_write(GPIO_PORT_CC, GPIO_PIN_4, GPIO_LOW);
usb_src = false;
// Only Icosa and Iowa have USB 5V VBUS rails. Skip on Hoag/Aula.
u32 hw_type = fuse_read_hw_type();
if (hw_type == FUSE_NX_HW_TYPE_ICOSA ||
hw_type == FUSE_NX_HW_TYPE_IOWA)
{
// Fan and Rail power from USB 5V VBUS.
PINMUX_AUX(PINMUX_AUX_USB_VBUS_EN0) = PINMUX_LPDR | 1;
gpio_config(GPIO_PORT_CC, GPIO_PIN_4, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_CC, GPIO_PIN_4, GPIO_OUTPUT_ENABLE);
gpio_write(GPIO_PORT_CC, GPIO_PIN_4, GPIO_LOW);
}
// Make sure GPIO power is enabled.
PMC(APBDEV_PMC_NO_IOPOWER) &= ~PMC_NO_IOPOWER_GPIO_IO_EN;
// Override power detect for GPIO AO IO rails.
PMC(APBDEV_PMC_PWR_DET_VAL) &= ~PMC_PWR_DET_GPIO_IO_EN;
// Enable GPIO AO IO rail for T210.
if (hw_get_chip_id() == GP_HIDREV_MAJOR_T210)
{
// Make sure GPIO power is enabled.
PMC(APBDEV_PMC_NO_IOPOWER) &= ~PMC_NO_IOPOWER_GPIO_IO_EN;
(void)PMC(APBDEV_PMC_NO_IOPOWER); // Commit write.
// Override power detect for GPIO AO IO rails.
PMC(APBDEV_PMC_PWR_DET_VAL) &= ~PMC_PWR_DET_GPIO_IO_EN;
(void)PMC(APBDEV_PMC_PWR_DET_VAL); // Commit write.
}
usb_src = false;
}
reg_5v_dev |= dev;
}
@ -61,15 +76,26 @@ void regulator_5v_disable(u8 dev)
gpio_config(GPIO_PORT_A, GPIO_PIN_5, GPIO_MODE_SPIO);
PINMUX_AUX(PINMUX_AUX_SATA_LED_ACTIVE) = PINMUX_PARKED | PINMUX_INPUT_ENABLE;
// Rail power from USB 5V VBUS.
gpio_write(GPIO_PORT_CC, GPIO_PIN_4, GPIO_LOW);
gpio_output_enable(GPIO_PORT_CC, GPIO_PIN_4, GPIO_OUTPUT_DISABLE);
gpio_config(GPIO_PORT_CC, GPIO_PIN_4, GPIO_MODE_SPIO);
PINMUX_AUX(PINMUX_AUX_USB_VBUS_EN0) = PINMUX_IO_HV | PINMUX_LPDR | PINMUX_PARKED | PINMUX_INPUT_ENABLE;
usb_src = false;
// Only Icosa and Iowa have USB 5V VBUS rails. Skip on Hoag/Aula.
u32 hw_type = fuse_read_hw_type();
if (hw_type == FUSE_NX_HW_TYPE_ICOSA ||
hw_type == FUSE_NX_HW_TYPE_IOWA)
{
// Rail power from USB 5V VBUS.
gpio_write(GPIO_PORT_CC, GPIO_PIN_4, GPIO_LOW);
gpio_output_enable(GPIO_PORT_CC, GPIO_PIN_4, GPIO_OUTPUT_DISABLE);
gpio_config(GPIO_PORT_CC, GPIO_PIN_4, GPIO_MODE_SPIO);
PINMUX_AUX(PINMUX_AUX_USB_VBUS_EN0) = PINMUX_IO_HV | PINMUX_LPDR | PINMUX_PARKED | PINMUX_INPUT_ENABLE;
usb_src = false;
}
// GPIO AO IO rails.
PMC(APBDEV_PMC_PWR_DET_VAL) |= PMC_PWR_DET_GPIO_IO_EN;
if (hw_get_chip_id() == GP_HIDREV_MAJOR_T210)
{
PMC(APBDEV_PMC_PWR_DET_VAL) |= PMC_PWR_DET_GPIO_IO_EN;
(void)PMC(APBDEV_PMC_PWR_DET_VAL); // Commit write.
}
}
}
@ -80,6 +106,12 @@ bool regulator_5v_get_dev_enabled(u8 dev)
void regulator_5v_usb_src_enable(bool enable)
{
// Only for Icosa/Iowa. Skip on Hoag/Aula.
u32 hw_type = fuse_read_hw_type();
if (hw_type != FUSE_NX_HW_TYPE_ICOSA &&
hw_type != FUSE_NX_HW_TYPE_IOWA)
return;
if (enable && !usb_src)
{
gpio_write(GPIO_PORT_CC, GPIO_PIN_4, GPIO_HIGH);