mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-23 02:16:41 +00:00
Code Issues Releases Activity

bdk: display: remove unneeded pinmuxing on Aula

Browse source
This commit is contained in:
CTCaer 2022-05-16 10:16:24 +03:00
parent 87fe374b3b
commit 331f1926d1
1 changed files with 25 additions and 27 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

52
bdk/display/di.c
View file

@ -378,54 +378,53 @@ void display_init()
// Enable Display Interface specific clocks. // Enable Display Interface specific clocks.
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI); CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI); CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1); CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1); CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = BIT(CLK_X_UART_FST_MIPI_CAL); CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = BIT(CLK_X_UART_FST_MIPI_CAL);
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIPI_CAL) = 10; // Set PLLP_OUT3 and div 6 (17MHz). CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIPI_CAL) = 10; // Set PLLP_OUT3 and div 6 (17MHz).
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_W_SET) = BIT(CLK_W_DSIA_LP); CLOCK(CLK_RST_CONTROLLER_CLK_ENB_W_SET) = BIT(CLK_W_DSIA_LP);
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP) = 10; // Set PLLP_OUT and div 6 (68MHz). CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP) = 10; // Set PLLP_OUT and div 6 (68MHz).
// Bring every IO rail out of deep power down. // Bring every IO rail out of deep power down.
PMC(APBDEV_PMC_IO_DPD_REQ) = PMC_IO_DPD_REQ_DPD_OFF; PMC(APBDEV_PMC_IO_DPD_REQ) = PMC_IO_DPD_REQ_DPD_OFF;
PMC(APBDEV_PMC_IO_DPD2_REQ) = PMC_IO_DPD_REQ_DPD_OFF; PMC(APBDEV_PMC_IO_DPD2_REQ) = PMC_IO_DPD_REQ_DPD_OFF;
// Configure LCD pins. // Configure LCD/BL pins.
PINMUX_AUX(PINMUX_AUX_NFC_EN) &= ~PINMUX_TRISTATE; // PULL_DOWN if (!_nx_aula)
PINMUX_AUX(PINMUX_AUX_NFC_INT) &= ~PINMUX_TRISTATE; // PULL_DOWN
PINMUX_AUX(PINMUX_AUX_LCD_RST) &= ~PINMUX_TRISTATE; // PULL_DOWN
// Configure Backlight pins.
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) &= ~PINMUX_TRISTATE; // PULL_DOWN | 1
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) &= ~PINMUX_TRISTATE; // PULL_DOWN
if (_nx_aula)
{
// Configure LCD RST pin.
gpio_config(GPIO_PORT_V, GPIO_PIN_2, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_V, GPIO_PIN_2, GPIO_OUTPUT_ENABLE);
}
else
{ {
// Configure LCD pins.
PINMUX_AUX(PINMUX_AUX_NFC_EN) = PINMUX_PULL_DOWN;
PINMUX_AUX(PINMUX_AUX_NFC_INT) = PINMUX_PULL_DOWN;
// Configure Backlight pins.
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = PINMUX_PULL_DOWN;
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) = PINMUX_PULL_DOWN;
// Set LCD AVDD pins mode and direction // Set LCD AVDD pins mode and direction
gpio_config(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_MODE_GPIO); gpio_config(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_OUTPUT_ENABLE); gpio_output_enable(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_OUTPUT_ENABLE);
// Enable LCD AVDD. // Enable LCD AVDD.
gpio_write(GPIO_PORT_I, GPIO_PIN_0, GPIO_HIGH); // LCD AVDD +5.4V enable. gpio_write(GPIO_PORT_I, GPIO_PIN_0, GPIO_HIGH); // LCD AVDD +5.4V enable.
usleep(10000); usleep(10000); // Wait minimum 4.2ms to stabilize.
gpio_write(GPIO_PORT_I, GPIO_PIN_1, GPIO_HIGH); // LCD AVDD -5.4V enable. gpio_write(GPIO_PORT_I, GPIO_PIN_1, GPIO_HIGH); // LCD AVDD -5.4V enable.
usleep(10000); usleep(10000); // Wait minimum 4.2ms to stabilize.
// Configure Backlight PWM/EN and LCD RST pins (BL PWM, BL EN, LCD RST). // Configure Backlight PWM/EN and LCD RST pins (BL PWM, BL EN, LCD RST).
gpio_config(GPIO_PORT_V, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2, GPIO_MODE_GPIO); gpio_config(GPIO_PORT_V, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_V, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2, GPIO_OUTPUT_ENABLE); gpio_output_enable(GPIO_PORT_V, GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2, GPIO_OUTPUT_ENABLE);
// Enable Backlight power. // Enable Backlight power.
gpio_write(GPIO_PORT_V, GPIO_PIN_1, GPIO_HIGH); gpio_write(GPIO_PORT_V, GPIO_PIN_1, GPIO_HIGH);
} }
// Configure LCD RST pin.
PINMUX_AUX(PINMUX_AUX_LCD_RST) = PINMUX_PULL_DOWN;
gpio_config(GPIO_PORT_V, GPIO_PIN_2, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_V, GPIO_PIN_2, GPIO_OUTPUT_ENABLE);
// Power up supply regulator for display interface. // Power up supply regulator for display interface.
MIPI_CAL(_DSIREG(MIPI_CAL_MIPI_BIAS_PAD_CFG2)) = 0; MIPI_CAL(_DSIREG(MIPI_CAL_MIPI_BIAS_PAD_CFG2)) = 0;
@ -794,8 +793,8 @@ skip_panel_deinit:
// Disable Display Interface specific clocks. // Disable Display Interface specific clocks.
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_SET) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI); CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_SET) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_CLR) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI); CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_CLR) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1); CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1); CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_CLR) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
// Power down pads. // Power down pads.
DSI(_DSIREG(DSI_PAD_CONTROL_0)) = DSI_PAD_CONTROL_VS1_PULLDN_CLK | DSI_PAD_CONTROL_VS1_PULLDN(0xF) | DSI_PAD_CONTROL_VS1_PDIO_CLK | DSI_PAD_CONTROL_VS1_PDIO(0xF); DSI(_DSIREG(DSI_PAD_CONTROL_0)) = DSI_PAD_CONTROL_VS1_PULLDN_CLK | DSI_PAD_CONTROL_VS1_PULLDN(0xF) | DSI_PAD_CONTROL_VS1_PDIO_CLK | DSI_PAD_CONTROL_VS1_PDIO(0xF);
@ -805,8 +804,7 @@ skip_panel_deinit:
if (!_nx_aula) if (!_nx_aula)
{ {
gpio_config(GPIO_PORT_V, GPIO_PIN_0, GPIO_MODE_SPIO); // Backlight PWM. gpio_config(GPIO_PORT_V, GPIO_PIN_0, GPIO_MODE_SPIO); // Backlight PWM.
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) & ~PINMUX_TRISTATE) | PINMUX_TRISTATE; PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = PINMUX_TRISTATE | PINMUX_PULL_DOWN | 1; // Set PWM0 mode.
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) & ~PINMUX_FUNC_MASK) | 1; // Set PWM0 mode.
} }
} }