Update Readme

README.md

@@ -53,14 +53,23 @@ You can find a template [Here](./res/hekate_ipl_template.ini)
 | autoboot=0         | 0: Disable, #: Boot entry number to auto boot.             |
 | autoboot_list=0    | 0: Read `autoboot` boot entry from hekate_ipl.ini, 1: Read from ini folder (ini files are ASCII ordered). |
 | bootwait=3         | 0: Disable (It also disables bootlogo. Having **VOL-** pressed since injection goes to menu.), #: Time to wait for **VOL-** to enter menu. |
-| verification=2     | 0: Disable Backup/Restore verification, 1: Sparse (block based, fast and not 100% reliable), 2: Full (sha256 based, slow and 100% reliable). |
 | autohosoff=1       | 0: Disable, 1: If woke up from HOS via an RTC alarm, shows logo, then powers off completely, 2: No logo, immediately powers off.|
 | autonogc=1         | 0: Disable, 1: Automatically applies nogc patch if unburnt fuses found and a >= 4.0.0 HOS is booted. |
 | updater2p=0        | 0: Disable, 1: Force updates (if needed) the reboot2payload binary to be hekate. |
 | backlight=100      | Screen backlight level. 0-255.                             |
 
 
-### Possible boot entry key/value combinations:
+### Nyx Global Configuration keys/values for (nyx.ini):
+
+| Config option      | Description                                                |
+| ------------------ | ---------------------------------------------------------- |
+| themecolor=167     | Sets Nyx color of text highlights.                         |
+| timeoff=100        | Sets time offset in HEX. Must be in HOS epoch format       |
+| homescreen=0       | Sets home screen. 0: Home menu, 1: All configs (merges Launch and More configs), 2: Launch, 3: More Configs. |
+| verification=1     | 0: Disable Backup/Restore verification, 1: Sparse (block based, fast and mostly reliable), 2: Full (sha256 based, slow and 100% reliable). |
+
+
+### Boot entry key/value combinations:
 
 | Config option          | Description                                                |
 | ---------------------- | ---------------------------------------------------------- |
@@ -76,15 +85,25 @@ You can find a template [Here](./res/hekate_ipl_template.ini)
 | debugmode=1            | Enables Debug mode. Obsolete when used with exosphere as secmon. |
 | atmosphere=1           | Enables Atmosphère patching.                               |
 | emupath={SD folder}    | Forces emuMMC to use the selected one. (=emuMMC/RAW1, =emuMMC/SD00, etc). emuMMC must be created by hekate because it uses the raw_based/file_based files. |
-| nouserexceptions=1     | Disables usermode exception handlers when paired with Exosphère. |
+| emummcforce=1          | Forces the use of emuMMC. If emummc.ini is disabled or not found, then it causes an error. |
-| userpmu=1              | Allows user access to PMU when paired with Exosphère.      |
+| emummc_force_disable=1 | Disables emuMMC if it's enabled.                           |
-| emummc_force_disable=1 | Disabled emuMMC if it's enabled.                           |
+| stock=1                | Disables unneeded kernel patching when running stock or semi-stock. `If emuMMC is enabled, emummc_force_disabled=1` is required. emuMMC is not supported on stock. If additional KIPs are needed other than OFW's, you can define them with `kip1` key. No kip should be used that relies on Atmosphère patching, because it will hang. If `NOGC` is needed, use `kip1patch=nogc`. |
-| stock=1                | Disables unneeded kernel patching when running stock or semi-stock. `If emuMMC is enabled, emummc_force_disabled=1` is required to run completely stock. |
 | id=idname              | Identifies boot entry for forced boot via id. Max 7 chars. |
 | payload={SD path}      | Payload launching. Tools, Linux, CFW bootloaders, etc.     |
 | logopath={SD path}     | If no logopath, `bootloader/bootlogo.bmp` will be used if exists. If logopath exists, it will load the specified bitmap. |
 | icon={SD path}         | Force Nyx to use the icon defined here. If this is not found, it will check for a bmp named as the boot entry ([Test 2] -> `bootloader/res/Test 2.bmp`). Otherwise default will be used. |
 
+
+### Boot entry key/value Exosphère combinations:
+
+| Config option          | Description                                                |
+| ---------------------- | ---------------------------------------------------------- |
+| nouserexceptions=1     | Disables usermode exception handlers when paired with Exosphère. |
+| userpmu=1              | Enables user access to PMU when paired with Exosphère.     |
+| cal0blank=1            | Overrides Exosphère config `blank_prodinfo_{sys/emu}mmc`. If that key doesn't exist, `exosphere.ini` will be used. |
+| cal0writesys=1         | Overrides Exosphère config `allow_writing_to_cal_sysmmc`. If that key doesn't exist, `exosphere.ini` will be used. |
+
+
 **Note1**: When using the wildcard (`/*`) with `kip1` you can still use the normal `kip1` after that to load extra single kips.
 
 **Note2**: When using FSS0 it parses exosphere, warmboot and all core kips. You can override the first 2 by using `secmon`/`warmboot` after defining `fss0`.

nyx/nyx_gui/nyx.c

@@ -383,7 +383,6 @@ void ipl_main()
 	heap_init(IPL_HEAP_START);
 
 
-
 	b_cfg = (boot_cfg_t *)(nyx_str->hekate + 0x94);
 
 	// Important: Preserve version header!