mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-22 18:06:40 +00:00
Code Issues Releases Activity

bdk: sdram: remove (lp)ddr2/3 support

Browse source
This commit is contained in:
CTCaer 2023-02-11 22:44:31 +02:00
parent ee3fc499cd
commit 4e15e034b8
2 changed files with 87 additions and 133 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

210
bdk/mem/sdram.c
View file

@ -628,13 +628,8 @@ break_nosleep:
// ZQ CAL setup (not actually issuing ZQ CAL now). // ZQ CAL setup (not actually issuing ZQ CAL now).
if (params->emc_zcal_warm_cold_boot_enables & 1) if (params->emc_zcal_warm_cold_boot_enables & 1)
{ {
if (params->memory_type == MEMORY_TYPE_DDR3L) EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt << 3; EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
if (params->memory_type == MEMORY_TYPE_LPDDR4)
{
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
}
} }
EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place. EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place.
@ -646,68 +641,51 @@ break_nosleep:
// Set clock enable signal. // Set clock enable signal.
u32 pin_gpio_cfg = (params->emc_pin_gpio_enable << 16) | (params->emc_pin_gpio << 12); u32 pin_gpio_cfg = (params->emc_pin_gpio_enable << 16) | (params->emc_pin_gpio << 12);
if (params->memory_type == MEMORY_TYPE_DDR3L || params->memory_type == MEMORY_TYPE_LPDDR4) EMC(EMC_PIN) = pin_gpio_cfg;
{ (void)EMC(EMC_PIN);
EMC(EMC_PIN) = pin_gpio_cfg; usleep(params->emc_pin_extra_wait + 200);
(void)EMC(EMC_PIN); EMC(EMC_PIN) = pin_gpio_cfg | 0x100;
usleep(params->emc_pin_extra_wait + 200); (void)EMC(EMC_PIN);
EMC(EMC_PIN) = pin_gpio_cfg | 0x100;
(void)EMC(EMC_PIN);
}
if (params->memory_type == MEMORY_TYPE_LPDDR4) usleep(params->emc_pin_extra_wait + 2000);
usleep(params->emc_pin_extra_wait + 2000);
else if (params->memory_type == MEMORY_TYPE_DDR3L)
usleep(params->emc_pin_extra_wait + 500);
// Enable clock enable signal. // Enable clock enable signal.
EMC(EMC_PIN) = pin_gpio_cfg | 0x101; EMC(EMC_PIN) = pin_gpio_cfg | 0x101;
(void)EMC(EMC_PIN); (void)EMC(EMC_PIN);
usleep(params->emc_pin_program_wait); usleep(params->emc_pin_program_wait);
// Send NOP (trigger just needs to be non-zero).
if (params->memory_type != MEMORY_TYPE_LPDDR4)
EMC(EMC_NOP) = (params->emc_dev_select << 30) + 1;
// On coldboot w/LPDDR2/3, wait 200 uSec after asserting CKE high.
if (params->memory_type == MEMORY_TYPE_LPDDR2)
usleep(params->emc_pin_extra_wait + 200);
// Init zq calibration, // Init zq calibration,
if (params->memory_type == MEMORY_TYPE_LPDDR4) // Patch 6 using BCT spare variables.
if (params->emc_bct_spare10)
*(vu32 *)params->emc_bct_spare10 = params->emc_bct_spare11;
// Write mode registers.
EMC(EMC_MRW2) = params->emc_mrw2;
EMC(EMC_MRW) = params->emc_mrw1;
EMC(EMC_MRW3) = params->emc_mrw3;
EMC(EMC_MRW4) = params->emc_mrw4;
EMC(EMC_MRW6) = params->emc_mrw6;
EMC(EMC_MRW14) = params->emc_mrw14;
EMC(EMC_MRW8) = params->emc_mrw8;
EMC(EMC_MRW12) = params->emc_mrw12;
EMC(EMC_MRW9) = params->emc_mrw9;
EMC(EMC_MRW13) = params->emc_mrw13;
if (params->emc_zcal_warm_cold_boot_enables & 1)
{ {
// Patch 6 using BCT spare variables. // Issue ZQCAL start, device 0.
if (params->emc_bct_spare10) EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0;
*(vu32 *)params->emc_bct_spare10 = params->emc_bct_spare11; usleep(params->emc_zcal_init_wait);
// Write mode registers. // Issue ZQCAL latch.
EMC(EMC_MRW2) = params->emc_mrw2; EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0 ^ 3;
EMC(EMC_MRW) = params->emc_mrw1; // Same for device 1.
EMC(EMC_MRW3) = params->emc_mrw3; if (!(params->emc_dev_select & 2))
EMC(EMC_MRW4) = params->emc_mrw4;
EMC(EMC_MRW6) = params->emc_mrw6;
EMC(EMC_MRW14) = params->emc_mrw14;
EMC(EMC_MRW8) = params->emc_mrw8;
EMC(EMC_MRW12) = params->emc_mrw12;
EMC(EMC_MRW9) = params->emc_mrw9;
EMC(EMC_MRW13) = params->emc_mrw13;
if (params->emc_zcal_warm_cold_boot_enables & 1)
{ {
// Issue ZQCAL start, device 0. EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1;
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0;
usleep(params->emc_zcal_init_wait); usleep(params->emc_zcal_init_wait);
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1 ^ 3;
// Issue ZQCAL latch.
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0 ^ 3;
// Same for device 1.
if (!(params->emc_dev_select & 2))
{
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1;
usleep(params->emc_zcal_init_wait);
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1 ^ 3;
}
} }
} }
@ -715,12 +693,9 @@ break_nosleep:
PMC(APBDEV_PMC_DDR_CFG) = params->pmc_ddr_cfg; PMC(APBDEV_PMC_DDR_CFG) = params->pmc_ddr_cfg;
// Start periodic ZQ calibration (LPDDRx only). // Start periodic ZQ calibration (LPDDRx only).
if (params->memory_type && params->memory_type <= MEMORY_TYPE_LPDDR4) EMC(EMC_ZCAL_INTERVAL) = params->emc_zcal_interval;
{ EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
EMC(EMC_ZCAL_INTERVAL) = params->emc_zcal_interval; EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
}
// Patch 7 using BCT spare variables. // Patch 7 using BCT spare variables.
if (params->emc_bct_spare12) if (params->emc_bct_spare12)
@ -1253,13 +1228,8 @@ static void _sdram_config_t210b01(const sdram_params_t210b01_t *params)
// ZQ CAL setup (not actually issuing ZQ CAL now). // ZQ CAL setup (not actually issuing ZQ CAL now).
if (params->emc_zcal_warm_cold_boot_enables & 1) if (params->emc_zcal_warm_cold_boot_enables & 1)
{ {
if (params->memory_type == MEMORY_TYPE_DDR3L) EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt << 3; EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
if (params->memory_type == MEMORY_TYPE_LPDDR4)
{
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
}
} }
EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place. EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place.
@ -1271,68 +1241,51 @@ static void _sdram_config_t210b01(const sdram_params_t210b01_t *params)
// Set clock enable signal. // Set clock enable signal.
u32 pin_gpio_cfg = (params->emc_pin_gpio_enable << 16) | (params->emc_pin_gpio << 12); u32 pin_gpio_cfg = (params->emc_pin_gpio_enable << 16) | (params->emc_pin_gpio << 12);
if (params->memory_type == MEMORY_TYPE_DDR3L || params->memory_type == MEMORY_TYPE_LPDDR4) EMC(EMC_PIN) = pin_gpio_cfg;
{ (void)EMC(EMC_PIN);
EMC(EMC_PIN) = pin_gpio_cfg; usleep(params->emc_pin_extra_wait + 200);
(void)EMC(EMC_PIN); EMC(EMC_PIN) = pin_gpio_cfg | 0x100;
usleep(params->emc_pin_extra_wait + 200); (void)EMC(EMC_PIN);
EMC(EMC_PIN) = pin_gpio_cfg | 0x100;
(void)EMC(EMC_PIN);
}
if (params->memory_type == MEMORY_TYPE_LPDDR4) usleep(params->emc_pin_extra_wait + 2000);
usleep(params->emc_pin_extra_wait + 2000);
else if (params->memory_type == MEMORY_TYPE_DDR3L)
usleep(params->emc_pin_extra_wait + 500);
// Enable clock enable signal. // Enable clock enable signal.
EMC(EMC_PIN) = pin_gpio_cfg | 0x101; EMC(EMC_PIN) = pin_gpio_cfg | 0x101;
(void)EMC(EMC_PIN); (void)EMC(EMC_PIN);
usleep(params->emc_pin_program_wait); usleep(params->emc_pin_program_wait);
// Send NOP (trigger just needs to be non-zero).
if (params->memory_type != MEMORY_TYPE_LPDDR4)
EMC(EMC_NOP) = (params->emc_dev_select << 30) + 1;
// On coldboot w/LPDDR2/3, wait 200 uSec after asserting CKE high.
if (params->memory_type == MEMORY_TYPE_LPDDR2)
usleep(params->emc_pin_extra_wait + 200);
// Init zq calibration, // Init zq calibration,
if (params->memory_type == MEMORY_TYPE_LPDDR4) // Patch 6 using BCT spare variables.
if (params->emc_bct_spare10)
*(vu32 *)params->emc_bct_spare10 = params->emc_bct_spare11;
// Write mode registers.
EMC(EMC_MRW2) = params->emc_mrw2;
EMC(EMC_MRW) = params->emc_mrw1;
EMC(EMC_MRW3) = params->emc_mrw3;
EMC(EMC_MRW4) = params->emc_mrw4;
EMC(EMC_MRW6) = params->emc_mrw6;
EMC(EMC_MRW14) = params->emc_mrw14;
EMC(EMC_MRW8) = params->emc_mrw8;
EMC(EMC_MRW12) = params->emc_mrw12;
EMC(EMC_MRW9) = params->emc_mrw9;
EMC(EMC_MRW13) = params->emc_mrw13;
if (params->emc_zcal_warm_cold_boot_enables & 1)
{ {
// Patch 6 using BCT spare variables. // Issue ZQCAL start, device 0.
if (params->emc_bct_spare10) EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0;
*(vu32 *)params->emc_bct_spare10 = params->emc_bct_spare11; usleep(params->emc_zcal_init_wait);
// Write mode registers. // Issue ZQCAL latch.
EMC(EMC_MRW2) = params->emc_mrw2; EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0 ^ 3;
EMC(EMC_MRW) = params->emc_mrw1; // Same for device 1.
EMC(EMC_MRW3) = params->emc_mrw3; if (!(params->emc_dev_select & 2))
EMC(EMC_MRW4) = params->emc_mrw4;
EMC(EMC_MRW6) = params->emc_mrw6;
EMC(EMC_MRW14) = params->emc_mrw14;
EMC(EMC_MRW8) = params->emc_mrw8;
EMC(EMC_MRW12) = params->emc_mrw12;
EMC(EMC_MRW9) = params->emc_mrw9;
EMC(EMC_MRW13) = params->emc_mrw13;
if (params->emc_zcal_warm_cold_boot_enables & 1)
{ {
// Issue ZQCAL start, device 0. EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1;
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0;
usleep(params->emc_zcal_init_wait); usleep(params->emc_zcal_init_wait);
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1 ^ 3;
// Issue ZQCAL latch.
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0 ^ 3;
// Same for device 1.
if (!(params->emc_dev_select & 2))
{
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1;
usleep(params->emc_zcal_init_wait);
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1 ^ 3;
}
} }
} }
@ -1348,12 +1301,9 @@ static void _sdram_config_t210b01(const sdram_params_t210b01_t *params)
PMC(APBDEV_PMC_DDR_CFG) = params->pmc_ddr_cfg; PMC(APBDEV_PMC_DDR_CFG) = params->pmc_ddr_cfg;
// Start periodic ZQ calibration (LPDDRx only). // Start periodic ZQ calibration (LPDDRx only).
if (params->memory_type == MEMORY_TYPE_LPDDR2 || params->memory_type == MEMORY_TYPE_DDR3L || params->memory_type == MEMORY_TYPE_LPDDR4) EMC(EMC_ZCAL_INTERVAL) = params->emc_zcal_interval;
{ EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
EMC(EMC_ZCAL_INTERVAL) = params->emc_zcal_interval; EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
}
// Patch 7 using BCT spare variables. // Patch 7 using BCT spare variables.
if (params->emc_bct_spare12) if (params->emc_bct_spare12)
@ -1480,16 +1430,18 @@ void *sdram_get_params_patched()
static void _sdram_init_t210() static void _sdram_init_t210()
{ {
const sdram_params_t210_t *params = (const sdram_params_t210_t *)_sdram_get_params_t210(); const sdram_params_t210_t *params = (const sdram_params_t210_t *)_sdram_get_params_t210();
if (params->memory_type != MEMORY_TYPE_LPDDR4)
return;
// Set DRAM voltage. // Set DRAM voltage.
max7762x_regulator_set_voltage(REGULATOR_SD1, 1125000); // HOS: 1.125V. Normal: 1.1V. max7762x_regulator_set_voltage(REGULATOR_SD1, 1125000); // HOS: 1.125V. Bootloader: 1.1V.
// VDDP Select. // VDDP Select.
PMC(APBDEV_PMC_VDDP_SEL) = params->pmc_vddp_sel; PMC(APBDEV_PMC_VDDP_SEL) = params->pmc_vddp_sel;
usleep(params->pmc_vddp_sel_wait); usleep(params->pmc_vddp_sel_wait);
// Set DDR pad voltage. // Set DDR pad voltage.
PMC(APBDEV_PMC_DDR_PWR) = PMC(APBDEV_PMC_DDR_PWR); PMC(APBDEV_PMC_DDR_PWR) = PMC(APBDEV_PMC_DDR_PWR); // Normally params->pmc_ddr_pwr.
// Turn on MEM IO Power. // Turn on MEM IO Power.
PMC(APBDEV_PMC_NO_IOPOWER) = params->pmc_no_io_power; PMC(APBDEV_PMC_NO_IOPOWER) = params->pmc_no_io_power;
@ -1507,6 +1459,8 @@ static void _sdram_init_t210()
static void _sdram_init_t210b01() static void _sdram_init_t210b01()
{ {
const sdram_params_t210b01_t *params = (const sdram_params_t210b01_t *)sdram_get_params_t210b01(); const sdram_params_t210b01_t *params = (const sdram_params_t210b01_t *)sdram_get_params_t210b01();
if (params->memory_type != MEMORY_TYPE_LPDDR4)
return;
// VDDP Select. // VDDP Select.
PMC(APBDEV_PMC_VDDP_SEL) = params->pmc_vddp_sel; PMC(APBDEV_PMC_VDDP_SEL) = params->pmc_vddp_sel;

10
bdk/mem/sdram.h
View file

@ -63,27 +63,27 @@ enum sdram_ids_mariko
LPDDR4X_AULA_4GB_HYNIX_H9HCNNNBKMMLXR_NEE = 6, // Replaced from Copper. Die-M. (1y-01). LPDDR4X_AULA_4GB_HYNIX_H9HCNNNBKMMLXR_NEE = 6, // Replaced from Copper. Die-M. (1y-01).
// LPDDR4X 3733Mbps. // LPDDR4X 3733Mbps.
LPDDR4X_IOWA_4GB_SAMSUNG_K4U6E3S4AM_MGCJ = 8, // Die-M. LPDDR4X_IOWA_4GB_SAMSUNG_K4U6E3S4AM_MGCJ = 8, // Die-M. 1st gen. 8 banks. 3733Mbps.
LPDDR4X_IOWA_8GB_SAMSUNG_K4UBE3D4AM_MGCJ = 9, // Die-M. LPDDR4X_IOWA_8GB_SAMSUNG_K4UBE3D4AM_MGCJ = 9, // Die-M.
LPDDR4X_IOWA_4GB_HYNIX_H9HCNNNBKMMLHR_NME = 10, // Die-M. LPDDR4X_IOWA_4GB_HYNIX_H9HCNNNBKMMLHR_NME = 10, // Die-M.
LPDDR4X_IOWA_4GB_MICRON_MT53E512M32D2NP_046_WTE = 11, // 4266Mbps. Die-E. LPDDR4X_IOWA_4GB_MICRON_MT53E512M32D2NP_046_WTE = 11, // 4266Mbps. Die-E.
LPDDR4X_HOAG_4GB_SAMSUNG_K4U6E3S4AM_MGCJ = 12, // Die-M. LPDDR4X_HOAG_4GB_SAMSUNG_K4U6E3S4AM_MGCJ = 12, // Die-M. 1st gen. 8 banks. 3733Mbps.
LPDDR4X_HOAG_8GB_SAMSUNG_K4UBE3D4AM_MGCJ = 13, // Die-M. LPDDR4X_HOAG_8GB_SAMSUNG_K4UBE3D4AM_MGCJ = 13, // Die-M.
LPDDR4X_HOAG_4GB_HYNIX_H9HCNNNBKMMLHR_NME = 14, // Die-M. LPDDR4X_HOAG_4GB_HYNIX_H9HCNNNBKMMLHR_NME = 14, // Die-M.
LPDDR4X_HOAG_4GB_MICRON_MT53E512M32D2NP_046_WTE = 15, // 4266Mbps. Die-E. LPDDR4X_HOAG_4GB_MICRON_MT53E512M32D2NP_046_WTE = 15, // 4266Mbps. Die-E.
// LPDDR4X 4266Mbps. // LPDDR4X 4266Mbps.
LPDDR4X_IOWA_4GB_SAMSUNG_K4U6E3S4AA_MGCL = 17, // Die-A. (1y-X03). LPDDR4X_IOWA_4GB_SAMSUNG_K4U6E3S4AA_MGCL = 17, // Die-A. (1y-X03). 2nd gen. 8 banks. 4266Mbps.
LPDDR4X_IOWA_8GB_SAMSUNG_K4UBE3D4AA_MGCL = 18, // Die-A. (1y-X03). LPDDR4X_IOWA_8GB_SAMSUNG_K4UBE3D4AA_MGCL = 18, // Die-A. (1y-X03).
LPDDR4X_HOAG_4GB_SAMSUNG_K4U6E3S4AA_MGCL = 19, // Die-A. (1y-X03). LPDDR4X_HOAG_4GB_SAMSUNG_K4U6E3S4AA_MGCL = 19, // Die-A. (1y-X03). 2nd gen. 8 banks. 4266Mbps.
LPDDR4X_IOWA_4GB_SAMSUNG_1Z = 20, // 1z nm. 40% lower power usage. (1z-01). LPDDR4X_IOWA_4GB_SAMSUNG_1Z = 20, // 1z nm. 40% lower power usage. (1z-01).
LPDDR4X_HOAG_4GB_SAMSUNG_1Z = 21, // 1z nm. 40% lower power usage. (1z-01). LPDDR4X_HOAG_4GB_SAMSUNG_1Z = 21, // 1z nm. 40% lower power usage. (1z-01).
LPDDR4X_AULA_4GB_SAMSUNG_1Z = 22, // 1z nm. 40% lower power usage. (1z-01). LPDDR4X_AULA_4GB_SAMSUNG_1Z = 22, // 1z nm. 40% lower power usage. (1z-01).
LPDDR4X_HOAG_8GB_SAMSUNG_K4UBE3D4AA_MGCL = 23, // Die-A. (1y-X03). LPDDR4X_HOAG_8GB_SAMSUNG_K4UBE3D4AA_MGCL = 23, // Die-A. (1y-X03).
LPDDR4X_AULA_4GB_SAMSUNG_K4U6E3S4AA_MGCL = 24, // Die-A. (1y-X03). LPDDR4X_AULA_4GB_SAMSUNG_K4U6E3S4AA_MGCL = 24, // Die-A. (1y-X03). 2nd gen. 8 banks. 4266Mbps.
LPDDR4X_IOWA_4GB_MICRON_MT53E512M32D2NP_046_WTF = 25, // 4266Mbps. Die-F. D9XRR. 10nm-class (1y-01). LPDDR4X_IOWA_4GB_MICRON_MT53E512M32D2NP_046_WTF = 25, // 4266Mbps. Die-F. D9XRR. 10nm-class (1y-01).
LPDDR4X_HOAG_4GB_MICRON_MT53E512M32D2NP_046_WTF = 26, // 4266Mbps. Die-F. D9XRR. 10nm-class (1y-01). LPDDR4X_HOAG_4GB_MICRON_MT53E512M32D2NP_046_WTF = 26, // 4266Mbps. Die-F. D9XRR. 10nm-class (1y-01).