mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-26 11:42:09 +00:00
Code Issues Releases Activity

bdk: various functionality independent changes

Browse source
This commit is contained in:
CTCaer 2022-01-16 01:03:24 +02:00
parent 5894062b93
commit 70504c295e
18 changed files with 56 additions and 28 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
bdk/display/di.h
View file

@ -657,23 +657,24 @@
/* Switch Panels:
*
* 6.2" panels for Icosa and Iowa skus:
* 6.2" panels for Icosa and Iowa SKUs:
* [10] 81 [26]: JDI LPM062M326A
* [10] 96 [09]: JDI LAM062M109A
* [20] 93 [0F]: InnoLux P062CCA-AZ1 (Rev A1)
* [20] 95 [0F]: InnoLux P062CCA-AZ2 (Rev B1)
* [20] 96 [0F]: InnoLux P062CCA-AZ3 [UNCONFIRMED MODEL REV]
* [20] 97 [0F]: InnoLux P062CCA-??? [UNCONFIRMED MODEL REV]
* [20] 98 [0F]: InnoLux P062CCA-??? [UNCONFIRMED MODEL REV]
* [30] 94 [0F]: AUO A062TAN01 (59.06A33.001)
* [30] 95 [0F]: AUO A062TAN02 (59.06A33.002)
* [30] XX [0F]: AUO A062TAN03 (59.06A33.003) [UNCONFIRMED ID]
*
* 5.5" panels for Hoag skus:
* 5.5" panels for Hoag SKUs:
* [20] 94 [10]: InnoLux 2J055IA-27A (Rev B1)
* [30] 93 [10]: AUO A055TAN01 (59.05A30.001)
* [40] XX [10]: Vendor 40 [UNCONFIRMED ID]
*
* 7.0" OLED panels for Aula skus:
* 7.0" OLED panels for Aula SKUs:
* [50] 9B [20]: Samsung AMS699VC01-0 (Rev 2.5)
*/

2
bdk/input/touch.c
View file

@ -410,7 +410,7 @@ int touch_power_on()
gpio_output_enable(GPIO_PORT_J, GPIO_PIN_7, GPIO_OUTPUT_ENABLE);
gpio_write(GPIO_PORT_J, GPIO_PIN_7, GPIO_HIGH);
// IRQ and more.
// Touscreen IRQ.
// PINMUX_AUX(PINMUX_AUX_TOUCH_INT) = PINMUX_INPUT_ENABLE | PINMUX_TRISTATE | PINMUX_PULL_UP | 3;
// gpio_config(GPIO_PORT_X, GPIO_PIN_1, GPIO_MODE_GPIO);
// gpio_write(GPIO_PORT_X, GPIO_PIN_1, GPIO_LOW);

12
bdk/mem/mc_t210.h
View file

@ -464,11 +464,19 @@
#define MC_UNTRANSLATED_REGION_CHECK 0x948
#define MC_DA_CONFIG0 0x9dc
// MC_VIDEO_PROTECT_REG_CTRL
#define VPR_LOCK_MODE_SHIFT 0
#define VPR_CTRL_UNLOCKED (0 << VPR_LOCK_MODE_SHIFT)
#define VPR_CTRL_LOCKED (1 << VPR_LOCK_MODE_SHIFT)
#define VPR_PROTECT_MODE_SHIFT 1
#define SEC_CTRL_SECURE (0 << VPR_PROTECT_MODE_SHIFT)
#define VPR_CTRL_TZ_SECURE (1 << VPR_PROTECT_MODE_SHIFT)
// MC_SECURITY_CARVEOUTX_CFG0
// Mode of LOCK_MODE.
#define PROTECT_MODE_SHIFT 0
#define SEC_CARVEOUT_CFG_SECURE (0 << PROTECT_MODE_SHIFT0)
#define SEC_CARVEOUT_CFG_TZ_SECURE (1 << PROTECT_MODE_SHIFT0)
#define SEC_CARVEOUT_CFG_SECURE (0 << PROTECT_MODE_SHIFT)
#define SEC_CARVEOUT_CFG_TZ_SECURE (1 << PROTECT_MODE_SHIFT)
// Enables PROTECT_MODE.
#define LOCK_MODE_SHIFT 1
#define SEC_CARVEOUT_CFG_UNLOCKED (0 << LOCK_MODE_SHIFT)

2
bdk/mem/minerva.c
View file

@ -19,8 +19,8 @@
#include "minerva.h"
#include <soc/clock.h>
#include <ianos/ianos.h>
#include <mem/emc.h>
#include <soc/clock.h>
#include <soc/fuse.h>
#include <soc/hw_init.h>

1
bdk/mem/smmu.h
View file

@ -30,6 +30,7 @@
#define MC_SMMU_TLB_FLUSH 0x30
#define MC_SMMU_PTC_FLUSH 0x34
#define MC_SMMU_ASID_SECURITY 0x38
#define MC_SMMU_AVPC_ASID 0x23C
#define MC_SMMU_TSEC_ASID 0x294
#define MC_SMMU_TRANSLATION_ENABLE_0 0x228
#define MC_SMMU_TRANSLATION_ENABLE_1 0x22c

8
bdk/power/max77620.h
View file

@ -95,9 +95,9 @@
#define MAX77620_IRQSD_PFI_SD1 BIT(6)
#define MAX77620_IRQSD_PFI_SD0 BIT(7)
#define MAX77620_REG_IRQ_LVL2_L0_7 0x08 // LDO number that irq occured.
#define MAX77620_REG_IRQ_LVL2_L0_7 0x08 // LDO number that irq occurred.
#define MAX77620_REG_IRQ_MSK_L0_7 0x10
#define MAX77620_REG_IRQ_LVL2_L8 0x09 // LDO number that irq occured. Only bit0: LDO8 is valid.
#define MAX77620_REG_IRQ_LVL2_L8 0x09 // LDO number that irq occurred. Only bit0: LDO8 is valid.
#define MAX77620_REG_IRQ_MSK_L8 0x11
#define MAX77620_REG_IRQ_LVL2_GPIO 0x0A // Edge detection interrupt.
@ -139,8 +139,8 @@
#define MAX77620_REG_DVSSD0 0x1B
#define MAX77620_REG_DVSSD1 0x1C
#define MAX77620_SDX_VOLT_MASK 0xFF
#define MAX77620_SD0_VOLT_MASK 0x3F
#define MAX77620_SD1_VOLT_MASK 0x7F
#define MAX77620_SD0_VOLT_MASK 0x7F // Max is 0x40.
#define MAX77620_SD1_VOLT_MASK 0x7F // Max is 0x4C.
#define MAX77620_LDO_VOLT_MASK 0x3F
#define MAX77620_REG_SD0_CFG 0x1D

8
bdk/power/max7762x.h
View file

@ -20,6 +20,14 @@
#include <utils/types.h>
/*
* SDx actual min is 625 mV. Multipliers 0/1 reserved.
* SD0 max is 1400 mV
* SD1 max is 1550 mV
* SD2 max is 3787.5 mV
* SD3 max is 3787.5 mV
*/
/*
* Switch Power domains (max77620):
* Name | Usage | uV step | uV min | uV default | uV max | Init

8
bdk/power/max77812.h
View file

@ -17,8 +17,8 @@
#ifndef _MAX77812_H_
#define _MAX77812_H_
#define MAX77812_PHASE31_CPU_I2C_ADDR 0x31 // 2 Outputs: 3-phase M1 + 1-phase M4.
#define MAX77812_PHASE211_CPU_I2C_ADDR 0x33 // 3 Outputs: 2-phase M1 + 1-phase M3 + 1-phase M4.
#define MAX77812_PHASE31_CPU_I2C_ADDR 0x31 // High power GPU. 2 Outputs: 3-phase M1 + 1-phase M4.
#define MAX77812_PHASE211_CPU_I2C_ADDR 0x33 // Low power GPU. 3 Outputs: 2-phase M1 + 1-phase M3 + 1-phase M4.
#define MAX77812_REG_RSET 0x00
#define MAX77812_REG_INT_SRC 0x01
@ -74,14 +74,14 @@
#define MAX77812_REG_GLB_CFG2 0x34
#define MAX77812_REG_GLB_CFG3 0x35
/*! Protected area and settings only for MAX77812_REG_VERSION 4 */
/*! Protected area and settings only for MAX77812_ES2_VERSION */
#define MAX77812_REG_GLB_CFG4 0x36
#define MAX77812_REG_GLB_CFG5 0x37
#define MAX77812_REG_GLB_CFG6 0x38
#define MAX77812_REG_GLB_CFG7 0x39
#define MAX77812_REG_GLB_CFG8 0x3A
#define MAX77812_REG_PROT_ACCESS 0xFD
#define MAX77812_REG_MAX 0xFE
#define MAX77812_REG_MAX 0xFD
#define MAX77812_REG_EN_CTRL_MASK(n) BIT(n)
#define MAX77812_START_SLEW_RATE_MASK 0x07

2
bdk/sec/se_t210.h
View file

@ -304,6 +304,8 @@
#define SE_STATUS_STATE_WAIT_OUT 2
#define SE_STATUS_STATE_WAIT_IN 3
#define SE_STATUS_STATE_MASK 3
#define SE_STATUS_MEM_IF_IDLE (0 << 2)
#define SE_STATUS_MEM_IF_BUSY BIT(2)
#define SE_ERR_STATUS_REG 0x804
#define SE_ERR_STATUS_SE_NS_ACCESS BIT(0)

1
bdk/soc/ccplex.c
View file

@ -91,6 +91,7 @@ void ccplex_boot_cpu0(u32 entry)
// Set reset vector.
SB(SB_AA64_RESET_LOW) = entry | SB_AA64_RST_AARCH64_MODE_EN;
SB(SB_AA64_RESET_HIGH) = 0;
// Non-secure reset vector write disable.
SB(SB_CSR) = SB_CSR_NS_RST_VEC_WR_DIS;
(void)SB(SB_CSR);

2
bdk/soc/clock.c
View file

@ -79,7 +79,7 @@ static clock_t _clock_sor0 = {
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_NOT_USED, CLK_X_SOR0, 0, 0
};
static clock_t _clock_sor1 = {
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_RST_CONTROLLER_CLK_SOURCE_SOR1, CLK_X_SOR1, 0, 2 //204MHz.
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_RST_CONTROLLER_CLK_SOURCE_SOR1, CLK_X_SOR1, 0, 2 // 204MHz.
};
static clock_t _clock_kfuse = {
CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_NO_SOURCE, CLK_H_KFUSE, 0, 0

1
bdk/soc/clock.h
View file

@ -117,6 +117,7 @@
#define CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRD 0x3A4
#define CLK_RST_CONTROLLER_CLK_SOURCE_MSELECT 0x3B4
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C4 0x3C4
#define CLK_RST_CONTROLLER_CLK_SOURCE_ACTMON 0x3E8
#define CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH1 0x3EC
#define CLK_RST_CONTROLLER_CLK_SOURCE_SYS 0x400
#define CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 0x410

4
bdk/soc/fuse.h
View file

@ -37,6 +37,8 @@
#define FUSE_DISABLEREGPROGRAM 0x2C
#define FUSE_WRITE_ACCESS_SW 0x30
#define FUSE_PWR_GOOD_SW 0x34
/*! Fuse Cached registers */
#define FUSE_SKU_INFO 0x110
#define FUSE_CPU_SPEEDO_0_CALIB 0x114
#define FUSE_CPU_IDDQ_CALIB 0x118
@ -64,8 +66,10 @@
#define FUSE_OPT_WAFER_ID 0x210
#define FUSE_OPT_X_COORDINATE 0x214
#define FUSE_OPT_Y_COORDINATE 0x218
#define FUSE_OPT_OPS_RESERVED 0x220
#define FUSE_GPU_IDDQ_CALIB 0x228
#define FUSE_USB_CALIB_EXT 0x350
#define FUSE_RESERVED_FIELD 0x354
#define FUSE_RESERVED_ODM28_T210B01 0x240

1
bdk/soc/hw_init.h
View file

@ -21,6 +21,7 @@
#include <utils/types.h>
#define BL_MAGIC_CRBOOT_SLD 0x30444C53 // SLD0, seamless display type 0.
#define BL_MAGIC_HEKATF_SLD 0x31444C53 // SLD1, seamless display type 1.
#define BL_MAGIC_BROKEN_HWI 0xBAADF00D // Broken hwinit.
extern u32 hw_rst_status;

5
bdk/soc/pmc.h
View file

@ -53,7 +53,7 @@
#define PMC_CRYPTO_OP_SE_DISABLE 1
#define APBDEV_PMC_SCRATCH33 0x120
#define APBDEV_PMC_SCRATCH37 0x130
#define PMC_SCRATCH37_KERNEL_PANIC_FLAG BIT(24)
#define PMC_SCRATCH37_KERNEL_PANIC_MAGIC 0x4E415054
#define APBDEV_PMC_SCRATCH40 0x13C
#define APBDEV_PMC_OSC_EDPD_OVER 0x1A4
#define PMC_OSC_EDPD_OVER_OSC_CTRL_OVER 0x400000
@ -103,6 +103,9 @@
#define APBDEV_PMC_SCRATCH188 0x810
#define APBDEV_PMC_SCRATCH190 0x818
#define APBDEV_PMC_SCRATCH200 0x840
#define APBDEV_PMC_SECURE_SCRATCH108 0xB08
#define APBDEV_PMC_SECURE_SCRATCH109 0xB0C
#define APBDEV_PMC_SECURE_SCRATCH110 0xB10
#define APBDEV_PMC_TZRAM_PWR_CNTRL 0xBE8
#define APBDEV_PMC_TZRAM_SEC_DISABLE 0xBEC
#define APBDEV_PMC_TZRAM_NON_SEC_DISABLE 0xBF0

5
bdk/soc/t210.h
View file

@ -35,6 +35,7 @@
#define AHBDMA_BASE 0x60008000
#define SYSREG_BASE 0x6000C000
#define SB_BASE (SYSREG_BASE + 0x200)
#define ACTMON_BASE 0x6000C800
#define GPIO_BASE 0x6000D000
#define GPIO_1_BASE (GPIO_BASE)
#define GPIO_2_BASE (GPIO_BASE + 0x100)
@ -89,6 +90,7 @@
#define SYSREG(off) _REG(SYSREG_BASE, off)
#define AHB_GIZMO(off) _REG(SYSREG_BASE, off)
#define SB(off) _REG(SB_BASE, off)
#define ACTMON(off) _REG(ACTMON_BASE, off)
#define GPIO(off) _REG(GPIO_BASE, off)
#define GPIO_1(off) _REG(GPIO_1_BASE, off)
#define GPIO_2(off) _REG(GPIO_2_BASE, off)
@ -184,6 +186,8 @@
#define MEM_PREFETCH_USB3_MST_ID MST_ID(17) // XUSB.
#define MEM_PREFETCH_ADDR_BNDRY(x) (((x) & 0xF) << 21)
#define MEM_PREFETCH_ENABLE BIT(31)
#define AHB_ARBITRATION_AHB_MEM_WRQUE_MST_ID 0xFC
#define MEM_WRQUE_SE_MST_ID BIT(14)
#define AHB_AHB_SPARE_REG 0x110
/*! Misc registers. */
@ -192,6 +196,7 @@
#define APB_MISC_GP_HIDREV 0x804
#define GP_HIDREV_MAJOR_T210 0x1
#define GP_HIDREV_MAJOR_T210B01 0x2
#define APB_MISC_GP_ASDBGREG 0x810
#define APB_MISC_GP_AUD_MCLK_CFGPADCTRL 0x8F4
#define APB_MISC_GP_LCD_BL_PWM_CFGPADCTRL 0xA34
#define APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL 0xA98

7
bdk/utils/sprintf.c
View file

@ -113,13 +113,6 @@ void s_printf(char *out_buf, const char *fmt, ...)
case 'X':
_s_putn(va_arg(ap, u32), 16, fill, fcnt);
break;
case 'k':
//gfx_con.fgcol = va_arg(ap, u32);
break;
case 'K':
//gfx_con.bgcol = va_arg(ap, u32);
//gfx_con.fillbg = 1;
break;
case '%':
_s_putc('%');
break;

8
bdk/utils/types.h
View file

@ -46,9 +46,9 @@ typedef volatile unsigned short vu16;
typedef volatile unsigned int vu32;
#ifdef __aarch64__
typedef u64 uptr;
typedef unsigned long long uptr;
#else /* __arm__ or __thumb__ */
typedef u32 uptr;
typedef unsigned long uptr;
#endif
/* Important */
@ -137,8 +137,8 @@ typedef struct __attribute__((__packed__)) _boot_cfg_t
{
struct
{
char id[8]; // 7 char ASCII null teminated.
char emummc_path[0x78]; // emuMMC/XXX, ASCII null teminated.
char id[8]; // 7 char ASCII null terminated.
char emummc_path[0x78]; // emuMMC/XXX, ASCII null terminated.
};
u8 ums; // nyx_ums_type.
u8 xt_str[0x80];