mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-22 18:06:40 +00:00
Code Issues Releases Activity

Bugfixes

Browse source 
The fan driver change ensures power off in any situation where a chainload software re-enables the 5V regulator.
This commit is contained in:
CTCaer 2020-03-21 22:28:50 +02:00
parent 976925c697
commit 9c6931a17c
6 changed files with 13 additions and 7 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
bootloader/main.c
View file

@ -1317,7 +1317,7 @@ void ipl_main()
heap_init(IPL_HEAP_START);
#ifdef DEBUG_UART_PORT
uart_send(DEBUG_UART_PORT, (u8 *)"Hekate: Hello!\r\n", 16);
uart_send(DEBUG_UART_PORT, (u8 *)"hekate: Hello!\r\n", 16);
uart_wait_idle(DEBUG_UART_PORT, UART_TX_IDLE);
#endif

2
bootloader/storage/nx_emmc.c
View file

@ -31,7 +31,7 @@ void nx_emmc_gpt_parse(link_t *gpt, sdmmc_storage_t *storage)
for (u32 i = 0; i < hdr->num_part_ents; i++)
{
gpt_entry_t *ent = (gpt_entry_t *)(buf + (hdr->part_ent_lba - 1) * NX_EMMC_BLOCKSIZE + i * sizeof(gpt_entry_t));
emmc_part_t *part = (emmc_part_t *)malloc(sizeof(emmc_part_t));
emmc_part_t *part = (emmc_part_t *)calloc(sizeof(emmc_part_t), 1);
part->lba_start = ent->lba_start;
part->lba_end = ent->lba_end;
part->attrs = ent->attrs;

2
nyx/nyx_gui/frontend/fe_emmc_tools.c
View file

@ -300,6 +300,7 @@ static int _dump_emmc_verify(emmc_tool_gui_t *gui, sdmmc_storage_t *storage, u32
sdFileSector += num;
sparseShouldVerify++;
// Check for cancellation combo.
btn = btn_wait_timeout(0, BTN_VOL_DOWN | BTN_VOL_UP);
if ((btn & BTN_VOL_DOWN) && (btn & BTN_VOL_UP))
{
@ -660,6 +661,7 @@ static int _dump_emmc_part(emmc_tool_gui_t *gui, char *sd_path, sdmmc_storage_t
bytesWritten = 0;
}
// Check for cancellation combo.
btn = btn_wait_timeout(0, BTN_VOL_DOWN | BTN_VOL_UP);
if ((btn & BTN_VOL_DOWN) && (btn & BTN_VOL_UP))
{

4
nyx/nyx_gui/nyx.c
View file

@ -400,8 +400,6 @@ void nyx_init_load_res()
h_cfg.rcm_patched = fuse_check_patched_rcm();
}
extern void pivot_stack(u32 stack_top);
#if (LV_LOG_PRINTF == 1)
#include "soc/clock.h"
#include "soc/gpio.h"
@ -427,7 +425,7 @@ void ipl_main()
clock_enable_uart(UART_B);
uart_init(UART_B, 115200);
uart_send(UART_B, (u8 *)"Hekate-NYX: Hello!\r\n", 20);
uart_send(UART_B, (u8 *)"hekate-NYX: Hello!\r\n", 20);
uart_wait_idle(UART_B, UART_TX_IDLE);
#endif

2
nyx/nyx_gui/storage/nx_emmc.c
View file

@ -30,7 +30,7 @@ void nx_emmc_gpt_parse(link_t *gpt, sdmmc_storage_t *storage)
for (u32 i = 0; i < hdr->num_part_ents; i++)
{
gpt_entry_t *ent = (gpt_entry_t *)(buf + (hdr->part_ent_lba - 1) * NX_EMMC_BLOCKSIZE + i * sizeof(gpt_entry_t));
emmc_part_t *part = (emmc_part_t *)malloc(sizeof(emmc_part_t));
emmc_part_t *part = (emmc_part_t *)calloc(sizeof(emmc_part_t), 1);
part->lba_start = ent->lba_start;
part->lba_end = ent->lba_end;
part->attrs = ent->attrs;

8
nyx/nyx_gui/thermal/fan.c
View file

@ -37,7 +37,6 @@ void set_fan_duty(u32 duty)
PINMUX_AUX(PINMUX_AUX_CAM1_PWDN) = PINMUX_TRISTATE | PINMUX_INPUT_ENABLE | PINMUX_PULL_UP | 1;
gpio_config(GPIO_PORT_S, GPIO_PIN_7, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_S, GPIO_PIN_7, GPIO_OUTPUT_DISABLE);
gpio_write(GPIO_PORT_S, GPIO_PIN_7, GPIO_LOW);
PWM(PWM_CONTROLLER_PWM_CSR_1) = PWM_CSR_EN | (1 << 24); // Max PWM to disable fan.
@ -58,12 +57,19 @@ void set_fan_duty(u32 duty)
{
PWM(PWM_CONTROLLER_PWM_CSR_1) = PWM_CSR_EN | (1 << 24); // Bit 24 is absolute 0%.
regulator_disable_5v(REGULATOR_5V_FAN);
// Disable fan.
PINMUX_AUX(PINMUX_AUX_LCD_GPIO2) =
PINMUX_INPUT_ENABLE | PINMUX_PARKED | PINMUX_TRISTATE | PINMUX_PULL_DOWN; // Set source to PWM1.
}
else // Set PWM duty.
{
// Fan power supply.
regulator_enable_5v(REGULATOR_5V_FAN);
PWM(PWM_CONTROLLER_PWM_CSR_1) = PWM_CSR_EN | (inv_duty << 16);
// Enable fan.
PINMUX_AUX(PINMUX_AUX_LCD_GPIO2) = 1; // Set source to PWM1.
}
curr_duty = duty;