mirror of
https://github.com/CTCaer/hekate.git
synced 2024-11-22 18:06:40 +00:00
General bugfixes + hardcoded name replacement
This commit is contained in:
Kostas Missos
parent
59e711c91d
commit
fdd94ffd2b
21 changed files with 200 additions and 107 deletions
|
|
@ -173,7 +173,7 @@ void _config_autoboot_list()
|
|||
|
||||
else
|
||||
boot_text[(i - 1) * 512] = '*';
|
||||
memcpy(boot_text + (i - 1) * 512 + 1, ini_sec->name, strlen(ini_sec->name));
|
||||
memcpy(boot_text + (i - 1) * 512 + 1, ini_sec->name, strlen(ini_sec->name) + 1);
|
||||
boot_text[strlen(ini_sec->name) + (i - 1) * 512 + 1] = 0;
|
||||
ments[i].caption = &boot_text[(i - 1) * 512];
|
||||
}
|
||||
|
|
@ -295,7 +295,7 @@ void config_autoboot()
|
|||
|
||||
else
|
||||
boot_text[(i - 4) * 512] = '*';
|
||||
memcpy(boot_text + (i - 4) * 512 + 1, ini_sec->name, strlen(ini_sec->name));
|
||||
memcpy(boot_text + (i - 4) * 512 + 1, ini_sec->name, strlen(ini_sec->name) + 1);
|
||||
boot_text[strlen(ini_sec->name) + (i - 4) * 512 + 1] = 0;
|
||||
ments[i].caption = &boot_text[(i - 4) * 512];
|
||||
}
|
||||
|
|
@ -501,9 +501,9 @@ void config_verification()
|
|||
|
||||
ments[1].type = MENT_CHGLINE;
|
||||
|
||||
memcpy(vr_text, " Disable", 9);
|
||||
memcpy(vr_text + 64, " Sparse (Fast - Not reliable)", 31);
|
||||
memcpy(vr_text + 128, " Full (Slow - 100% reliable)", 31);
|
||||
memcpy(vr_text, " Disable (Fastest)", 19);
|
||||
memcpy(vr_text + 64, " Sparse (Fast - Not reliable)", 32);
|
||||
memcpy(vr_text + 128, " Full (Slow - 100% reliable)", 32);
|
||||
|
||||
for (u32 i = 0; i < 3; i++)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -192,11 +192,10 @@ void ini_free(link_t *dst)
|
|||
{
|
||||
free(kv->key);
|
||||
free(kv->val);
|
||||
free(kv);
|
||||
//free(kv);
|
||||
}
|
||||
}
|
||||
free(ini_sec->name);
|
||||
//TODO: Free section structs.
|
||||
//free(ini_sec);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -42,8 +42,8 @@ static void _display_dsi_wait(u32 timeout, u32 off, u32 mask)
|
|||
void display_init()
|
||||
{
|
||||
// Power on.
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_LDO0_CFG, 0xD0); // Configure to 1.2V.
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_GPIO7, 0x09);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_LDO0_CFG, 0xD0); // Configure to 1.2V.
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO7, 0x09);
|
||||
|
||||
// Enable MIPI CAL, DSI, DISP1, HOST1X, UART_FST_MIPI_CAL, DSIA LP clocks.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = 0x1010000;
|
||||
|
|
|
|||
|
|
@ -508,15 +508,10 @@ void gfx_set_rect_rgb(gfx_ctxt_t *ctxt, const u8 *buf, u32 size_x, u32 size_y, u
|
|||
|
||||
void gfx_set_rect_argb(gfx_ctxt_t *ctxt, const u32 *buf, u32 size_x, u32 size_y, u32 pos_x, u32 pos_y)
|
||||
{
|
||||
u32 pos = 0;
|
||||
u32 *ptr = (u32 *)buf;
|
||||
for (u32 y = pos_y; y < (pos_y + size_y); y++)
|
||||
{
|
||||
for (u32 x = pos_x; x < (pos_x + size_x); x++)
|
||||
{
|
||||
ctxt->fb[x + y*ctxt->stride] = buf[pos];
|
||||
pos+=1;
|
||||
}
|
||||
}
|
||||
ctxt->fb[x + y * ctxt->stride] = *ptr++;
|
||||
}
|
||||
|
||||
void gfx_render_bmp_argb(gfx_ctxt_t *ctxt, const u32 *buf, u32 size_x, u32 size_y, u32 pos_x, u32 pos_y)
|
||||
|
|
@ -524,6 +519,6 @@ void gfx_render_bmp_argb(gfx_ctxt_t *ctxt, const u32 *buf, u32 size_x, u32 size_
|
|||
for (u32 y = pos_y; y < (pos_y + size_y); y++)
|
||||
{
|
||||
for (u32 x = pos_x; x < (pos_x + size_x); x++)
|
||||
ctxt->fb[x + y*ctxt->stride] = buf[(size_y + pos_y - 1 - y ) * size_x + x - pos_x];
|
||||
ctxt->fb[x + y * ctxt->stride] = buf[(size_y + pos_y - 1 - y ) * size_x + x - pos_x];
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -60,10 +60,10 @@ void tui_sbar(gfx_con_t *con, bool force_update)
|
|||
max17050_get_property(MAX17050_AvgCurrent, &battVoltCurr);
|
||||
|
||||
if (battVoltCurr >= 0)
|
||||
gfx_printf(con, " %k+%d mA %k%K\n",
|
||||
gfx_printf(con, " %k+%d mA%k%K\n",
|
||||
0xFF008800, battVoltCurr / 1000, 0xFFCCCCCC, 0xFF1B1B1B);
|
||||
else
|
||||
gfx_printf(con, " %k-%d mA %k%K\n",
|
||||
gfx_printf(con, " %k-%d mA%k%K\n",
|
||||
0xFF880000, (~battVoltCurr) / 1000, 0xFFCCCCCC, 0xFF1B1B1B);
|
||||
con->fntsz = prevFontSize;
|
||||
gfx_con_setpos(con, cx, cy);
|
||||
|
|
@ -107,7 +107,7 @@ void *tui_do_menu(gfx_con_t *con, menu_t *menu)
|
|||
X_MENU_LOGO, Y_MENU_LOGO, X_POS_MENU_LOGO, Y_POS_MENU_LOGO);
|
||||
#endif //MENU_LOGO_ENABLE
|
||||
|
||||
while (1)
|
||||
while (true)
|
||||
{
|
||||
gfx_con_setcol(con, 0xFFCCCCCC, 1, 0xFF1B1B1B);
|
||||
gfx_con_setpos(con, menu->x, menu->y);
|
||||
|
|
|
|||
|
|
@ -131,7 +131,7 @@ static void _se_lock()
|
|||
SE(SE_KEY_TABLE_ACCESS_LOCK_OFFSET) = 0; // Make all key access regs secure only.
|
||||
SE(SE_RSA_KEYTABLE_ACCESS_LOCK_OFFSET) = 0; // Make all RSA access regs secure only.
|
||||
SE(SE_SECURITY_0) &= 0xFFFFFFFB; // Make access lock regs secure only.
|
||||
memset((void *) IPATCH_BASE, 0, 13);
|
||||
memset((void *)IPATCH_BASE, 0, 13);
|
||||
SB(SB_CSR) = 0x10; // Protected IROM enable.
|
||||
|
||||
// This is useful for documenting the bits in the SE config registers, so we can keep it around.
|
||||
|
|
@ -685,7 +685,7 @@ int hos_launch(ini_sec_t *cfg)
|
|||
// Wait for secmon to get ready.
|
||||
cluster_boot_cpu0(ctxt.pkg1_id->secmon_base);
|
||||
while (!*mb_out)
|
||||
usleep(1); // This only works when in IRAM or with a trained DRAM.
|
||||
usleep(1); // This only works when in IRAM or with a trained DRAM.
|
||||
|
||||
//TODO: pkg1.1 locks PMC scratches, we can do that too at some point.
|
||||
/*PMC(0x4) = 0x7FFFF3;
|
||||
|
|
|
|||
|
|
@ -95,8 +95,13 @@ int ianos_loader(bool sdmount, char *path, elfType_t type, void *moduleConfig)
|
|||
int res = 0;
|
||||
|
||||
if (sdmount)
|
||||
{
|
||||
if (!sd_mount())
|
||||
goto elfLoadFinalOut;
|
||||
{
|
||||
res = 0xFFFF;
|
||||
goto elfLoadFinalOut;
|
||||
}
|
||||
}
|
||||
|
||||
fileBuf = sd_file_read(path);
|
||||
|
||||
|
|
|
|||
|
|
@ -351,7 +351,7 @@ void config_hw()
|
|||
clock_enable_se();
|
||||
|
||||
// Enable fuse clock.
|
||||
clock_enable_fuse(1);
|
||||
clock_enable_fuse(true);
|
||||
// Disable fuse programming.
|
||||
fuse_disable_program();
|
||||
|
||||
|
|
@ -369,33 +369,30 @@ void config_hw()
|
|||
clock_enable_i2c(I2C_1);
|
||||
clock_enable_i2c(I2C_5);
|
||||
|
||||
static const clock_t clock_unk1 = { CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, 0x42C, 0x1F, 0, 0 };
|
||||
static const clock_t clock_unk2 = { CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, 0, 0x1E, 0, 0 };
|
||||
clock_enable(&clock_unk1);
|
||||
clock_enable(&clock_unk2);
|
||||
clock_enable_unk2();
|
||||
|
||||
i2c_init(I2C_1);
|
||||
i2c_init(I2C_5);
|
||||
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_CNFGBBC, 0x40);
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_ONOFFCNFG1, 0x78);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CNFGBBC, 0x40);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_ONOFFCNFG1, 0x78);
|
||||
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_FPS_CFG0, 0x38);
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_FPS_CFG1, 0x3A);
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_FPS_CFG2, 0x38);
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_FPS_LDO4, 0xF);
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_FPS_LDO8, 0xC7);
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_FPS_SD0, 0x4F);
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_FPS_SD1, 0x29);
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_FPS_SD3, 0x1B);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG0, 0x38);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG1, 0x3A);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG2, 0x38);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_LDO4, 0xF);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_LDO8, 0xC7);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD0, 0x4F);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD1, 0x29);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD3, 0x1B);
|
||||
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_SD0, 42); //42 = (1125000 - 600000) / 12500 -> 1.125V
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD0, 42); //42 = (1125000 - 600000) / 12500 -> 1.125V
|
||||
|
||||
config_pmc_scratch();
|
||||
config_pmc_scratch(); // Missing from 4.x+
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = (CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) & 0xFFFF8888) | 0x3333;
|
||||
|
||||
mc_config_carveout();
|
||||
mc_config_carveout(); // Missing from 4.x+
|
||||
|
||||
sdram_init();
|
||||
}
|
||||
|
|
@ -1754,9 +1751,9 @@ void (*ext_payload_ptr)() = (void *)EXT_PAYLOAD_ADDR;
|
|||
|
||||
void reloc_patcher(u32 payload_size)
|
||||
{
|
||||
const u32 START_OFF = 0x7C;
|
||||
const u32 PAYLOAD_END_OFF = 0x84;
|
||||
const u32 IPL_START_OFF = 0x88;
|
||||
static const u32 START_OFF = 0x7C;
|
||||
static const u32 PAYLOAD_END_OFF = 0x84;
|
||||
static const u32 IPL_START_OFF = 0x88;
|
||||
|
||||
memcpy((u8 *)EXT_PAYLOAD_ADDR, (u8 *)IPL_START, PATCHED_RELOC_SZ);
|
||||
|
||||
|
|
@ -1807,7 +1804,12 @@ int launch_payload(char *path, bool update)
|
|||
}
|
||||
|
||||
f_close(&fp);
|
||||
free(path);
|
||||
if (!update)
|
||||
{
|
||||
free(path);
|
||||
path = NULL;
|
||||
}
|
||||
|
||||
|
||||
if (update)
|
||||
{
|
||||
|
|
@ -1834,14 +1836,14 @@ int launch_payload(char *path, bool update)
|
|||
{
|
||||
if (!update)
|
||||
reloc_patcher(ALIGN(size, 0x10));
|
||||
reconfig_hw_workaround(0);
|
||||
reconfig_hw_workaround(false);
|
||||
}
|
||||
else
|
||||
{
|
||||
reloc_patcher(0x7000);
|
||||
if (*(vu32 *)CBFS_SDRAM_EN_ADDR != 0x4452414D)
|
||||
return 1;
|
||||
reconfig_hw_workaround(1);
|
||||
reconfig_hw_workaround(true);
|
||||
}
|
||||
|
||||
// Launch our payload.
|
||||
|
|
@ -1958,7 +1960,10 @@ void launch_tools(u8 type)
|
|||
if (!type)
|
||||
{
|
||||
if (launch_payload(dir, false))
|
||||
{
|
||||
EPRINTF("Failed to launch payload.");
|
||||
free(dir);
|
||||
}
|
||||
}
|
||||
else
|
||||
ianos_loader(true, dir, DRAM_LIB, NULL);
|
||||
|
|
@ -2145,8 +2150,8 @@ void launch_firmware()
|
|||
|
||||
if (!cfg_sec)
|
||||
{
|
||||
gfx_printf(&gfx_con, "\nUsing default launch configuration...\n\n");
|
||||
gfx_puts(&gfx_con, "Press POWER to Continue.\nPress VOL to go to the menu.\n\n\n");
|
||||
gfx_puts(&gfx_con, "\nPress POWER to Continue.\nPress VOL to go to the menu.\n\n");
|
||||
gfx_printf(&gfx_con, "\nUsing default launch configuration...\n\n\n");
|
||||
|
||||
u32 btn = btn_wait();
|
||||
if (!(btn & BTN_POWER))
|
||||
|
|
@ -2261,7 +2266,6 @@ void auto_launch_firmware()
|
|||
if (h_cfg.autoboot_list)
|
||||
{
|
||||
ini_free(&ini_sections);
|
||||
list_init(&ini_sections);
|
||||
ini_free_section(cfg_sec);
|
||||
boot_entry_id = 1;
|
||||
bootlogoCustomEntry = NULL;
|
||||
|
|
@ -3052,6 +3056,7 @@ ment_t ment_cinfo[] = {
|
|||
MDEF_BACK(),
|
||||
MDEF_CHGLINE(),
|
||||
MDEF_CAPTION("---- SoC Info ----", 0xFF0AB9E6),
|
||||
MDEF_HANDLER("Ipatches & bootrom info", bootrom_ipatches_info),
|
||||
MDEF_HANDLER("Print fuse info", print_fuseinfo),
|
||||
MDEF_HANDLER("Print kfuse info", print_kfuseinfo),
|
||||
MDEF_HANDLER("Print TSEC keys", print_tsec_key),
|
||||
|
|
@ -3117,7 +3122,6 @@ ment_t ment_tools[] = {
|
|||
MDEF_HANDLER("Fix battery de-sync", fix_battery_desync),
|
||||
MDEF_HANDLER("Unset archive bit (switch folder)", fix_sd_switch_attr),
|
||||
MDEF_HANDLER("Unset archive bit (all sd files)", fix_sd_all_attr),
|
||||
MDEF_HANDLER("Ipatches & bootrom info", bootrom_ipatches_info),
|
||||
//MDEF_HANDLER("Fix fuel gauge configuration", fix_fuel_gauge_configuration),
|
||||
//MDEF_HANDLER("Reset all battery cfg", reset_pmic_fuel_gauge_charger_config),
|
||||
MDEF_CHGLINE(),
|
||||
|
|
@ -3155,7 +3159,7 @@ extern void pivot_stack(u32 stack_top);
|
|||
void ipl_main()
|
||||
{
|
||||
// Skip config if we just updated the bootloader.
|
||||
if (*(u32 *)BOOTLOADER_UPDATED_MAGIC_ADDR != BOOTLOADER_UPDATED_MAGIC)
|
||||
if (*(vu32 *)BOOTLOADER_UPDATED_MAGIC_ADDR != BOOTLOADER_UPDATED_MAGIC)
|
||||
config_hw();
|
||||
|
||||
//Pivot the stack so we have enough space.
|
||||
|
|
@ -3167,6 +3171,9 @@ void ipl_main()
|
|||
//uart_send(UART_C, (u8 *)0x40000000, 0x10000);
|
||||
//uart_wait_idle(UART_C, UART_TX_IDLE);
|
||||
|
||||
// Set bootloader's default configuration.
|
||||
set_default_configuration();
|
||||
|
||||
// Save sdram lp0 config.
|
||||
ianos_loader(true, "bootloader/sys/libsys_lp0.bso", DRAM_LIB, (void *)sdram_get_params());
|
||||
|
||||
|
|
@ -3185,13 +3192,12 @@ void ipl_main()
|
|||
// Enable backlight after initializing gfx
|
||||
//display_backlight(true);
|
||||
|
||||
set_default_configuration();
|
||||
// Load saved configuration and auto boot if enabled.
|
||||
auto_launch_firmware();
|
||||
|
||||
while (1)
|
||||
while (true)
|
||||
tui_do_menu(&gfx_con, &menu_top);
|
||||
|
||||
while (1)
|
||||
while (true)
|
||||
;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -124,6 +124,6 @@ void *calloc(u32 num, u32 size)
|
|||
|
||||
void free(void *buf)
|
||||
{
|
||||
if (buf != NULL)
|
||||
if ((buf != NULL) || ((u32)buf > (_heap.start - 1)))
|
||||
_heap_free(&_heap, (u32)buf);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -507,8 +507,8 @@ void sdram_init()
|
|||
//TODO: sdram_id should be in [0,4].
|
||||
const sdram_params_t *params = (const sdram_params_t *)sdram_get_params();
|
||||
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_SD_CFG2, 0x05);
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_SD1, 40); //40 = (1000 * 1100 - 600000) / 12500 -> 1.1V
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD_CFG2, 0x05);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD1, 40); //40 = (1000 * 1100 - 600000) / 12500 -> 1.1V
|
||||
|
||||
PMC(APBDEV_PMC_VDDP_SEL) = params->pmc_vddp_sel;
|
||||
usleep(params->pmc_vddp_sel_wait);
|
||||
|
|
|
|||
|
|
@ -11,6 +11,8 @@
|
|||
#ifndef _MFD_MAX77620_H_
|
||||
#define _MFD_MAX77620_H_
|
||||
|
||||
#define MAX77620_I2C_ADDR 0x3C
|
||||
|
||||
/* GLOBAL, PMIC, GPIO, FPS, ONOFFC, CID Registers */
|
||||
#define MAX77620_REG_CNFGGLBL1 0x00
|
||||
#define MAX77620_REG_CNFGGLBL2 0x01
|
||||
|
|
|
|||
|
|
@ -68,8 +68,8 @@ int max77620_regulator_get_status(u32 id)
|
|||
const max77620_regulator_t *reg = &_pmic_regulators[id];
|
||||
|
||||
if (reg->type == REGULATOR_SD)
|
||||
return (i2c_recv_byte(I2C_5, 0x3C, MAX77620_REG_STATSD) & reg->status_mask) ? 0 : 1;
|
||||
return (i2c_recv_byte(I2C_5, 0x3C, reg->cfg_addr) & 8) ? 1 : 0;
|
||||
return (i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_STATSD) & reg->status_mask) ? 0 : 1;
|
||||
return (i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, reg->cfg_addr) & 8) ? 1 : 0;
|
||||
}
|
||||
|
||||
int max77620_regulator_config_fps(u32 id)
|
||||
|
|
@ -79,7 +79,7 @@ int max77620_regulator_config_fps(u32 id)
|
|||
|
||||
const max77620_regulator_t *reg = &_pmic_regulators[id];
|
||||
|
||||
i2c_send_byte(I2C_5, 0x3C, reg->fps_addr, (reg->fps_src << 6) | (reg->pu_period << 3) | (reg->pd_period));
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, reg->fps_addr, (reg->fps_src << 6) | (reg->pu_period << 3) | (reg->pd_period));
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
|
@ -95,9 +95,9 @@ int max77620_regulator_set_voltage(u32 id, u32 mv)
|
|||
return 0;
|
||||
|
||||
u32 mult = (mv + reg->mv_step - 1 - reg->mv_min) / reg->mv_step;
|
||||
u8 val = i2c_recv_byte(I2C_5, 0x3C, reg->volt_addr);
|
||||
u8 val = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, reg->volt_addr);
|
||||
val = (val & ~reg->volt_mask) | (mult & reg->volt_mask);
|
||||
i2c_send_byte(I2C_5, 0x3C, reg->volt_addr, val);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, reg->volt_addr, val);
|
||||
usleep(1000);
|
||||
|
||||
return 1;
|
||||
|
|
@ -111,12 +111,12 @@ int max77620_regulator_enable(u32 id, int enable)
|
|||
const max77620_regulator_t *reg = &_pmic_regulators[id];
|
||||
|
||||
u32 addr = reg->type == REGULATOR_SD ? reg->cfg_addr : reg->volt_addr;
|
||||
u8 val = i2c_recv_byte(I2C_5, 0x3C, addr);
|
||||
u8 val = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, addr);
|
||||
if (enable)
|
||||
val = (val & ~reg->enable_mask) | ((3 << reg->enable_shift) & reg->enable_mask);
|
||||
else
|
||||
val &= ~reg->enable_mask;
|
||||
i2c_send_byte(I2C_5, 0x3C, addr, val);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, addr, val);
|
||||
usleep(1000);
|
||||
|
||||
return 1;
|
||||
|
|
@ -126,16 +126,17 @@ void max77620_config_default()
|
|||
{
|
||||
for (u32 i = 1; i <= REGULATOR_MAX; i++)
|
||||
{
|
||||
i2c_recv_byte(I2C_5, 0x3C, MAX77620_REG_CID4);
|
||||
i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CID4);
|
||||
max77620_regulator_config_fps(i);
|
||||
max77620_regulator_set_voltage(i, _pmic_regulators[i].mv_default);
|
||||
if (_pmic_regulators[i].fps_src != MAX77620_FPS_SRC_NONE)
|
||||
max77620_regulator_enable(i, 1);
|
||||
}
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_SD_CFG2, 4);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD_CFG2, 4);
|
||||
}
|
||||
|
||||
void max77620_low_battery_monitor_config()
|
||||
{
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_CNFGGLBL1, MAX77620_CNFGGLBL1_LBDAC_EN | MAX77620_CNFGGLBL1_LBHYST_N | MAX77620_CNFGGLBL1_LBDAC_N);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CNFGGLBL1,
|
||||
MAX77620_CNFGGLBL1_LBDAC_EN | MAX77620_CNFGGLBL1_LBHYST_N | MAX77620_CNFGGLBL1_LBDAC_N);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -59,6 +59,51 @@
|
|||
#define REGULATOR_LDO8 12
|
||||
#define REGULATOR_MAX 12
|
||||
|
||||
#define MAX77621_CPU_I2C_ADDR 0x1B
|
||||
#define MAX77621_GPU_I2C_ADDR 0x1C
|
||||
|
||||
#define MAX77621_VOUT_REG 0
|
||||
#define MAX77621_VOUT_DVC_REG 1
|
||||
#define MAX77621_CONTROL1_REG 2
|
||||
#define MAX77621_CONTROL2_REG 3
|
||||
|
||||
/* MAX77621_VOUT */
|
||||
#define MAX77621_VOUT_ENABLE (1 << 7)
|
||||
#define MAX77621_VOUT_MASK 0x7F
|
||||
|
||||
/* MAX77621_VOUT_DVC_DVS */
|
||||
#define MAX77621_DVS_VOUT_MASK 0x7F
|
||||
|
||||
/* MAX77621_CONTROL1 */
|
||||
#define MAX77621_SNS_ENABLE (1 << 7)
|
||||
#define MAX77621_FPWM_EN_M (1 << 6)
|
||||
#define MAX77621_NFSR_ENABLE (1 << 5)
|
||||
#define MAX77621_AD_ENABLE (1 << 4)
|
||||
#define MAX77621_BIAS_ENABLE (1 << 3)
|
||||
#define MAX77621_FREQSHIFT_9PER (1 << 2)
|
||||
|
||||
#define MAX77621_RAMP_12mV_PER_US 0x0
|
||||
#define MAX77621_RAMP_25mV_PER_US 0x1
|
||||
#define MAX77621_RAMP_50mV_PER_US 0x2
|
||||
#define MAX77621_RAMP_200mV_PER_US 0x3
|
||||
#define MAX77621_RAMP_MASK 0x3
|
||||
|
||||
/* MAX77621_CONTROL2 */
|
||||
#define MAX77621_WDTMR_ENABLE (1 << 6)
|
||||
#define MAX77621_DISCH_ENBABLE (1 << 5)
|
||||
#define MAX77621_FT_ENABLE (1 << 4)
|
||||
#define MAX77621_T_JUNCTION_120 (1 << 7)
|
||||
|
||||
#define MAX77621_CKKADV_TRIP_DISABLE 0xC
|
||||
#define MAX77621_CKKADV_TRIP_75mV_PER_US 0x0
|
||||
#define MAX77621_CKKADV_TRIP_150mV_PER_US 0x4
|
||||
#define MAX77621_CKKADV_TRIP_75mV_PER_US_HIST_DIS 0x8
|
||||
|
||||
#define MAX77621_INDUCTOR_MIN_30_PER 0x0
|
||||
#define MAX77621_INDUCTOR_NOMINAL 0x1
|
||||
#define MAX77621_INDUCTOR_PLUS_30_PER 0x2
|
||||
#define MAX77621_INDUCTOR_PLUS_60_PER 0x3
|
||||
|
||||
int max77620_regulator_get_status(u32 id);
|
||||
int max77620_regulator_config_fps(u32 id);
|
||||
int max77620_regulator_set_voltage(u32 id, u32 mv);
|
||||
|
|
|
|||
|
|
@ -167,7 +167,9 @@ int se_aes_unwrap_key(u32 ks_dst, u32 ks_src, const void *input)
|
|||
{
|
||||
SE(SE_CONFIG_REG_OFFSET) = SE_CONFIG_DEC_ALG(ALG_AES_DEC) | SE_CONFIG_DST(DST_KEYTAB);
|
||||
SE(SE_CRYPTO_REG_OFFSET) = SE_CRYPTO_KEY_INDEX(ks_src) | SE_CRYPTO_CORE_SEL(CORE_DECRYPT);
|
||||
SE(SE_BLOCK_COUNT_REG_OFFSET) = 0;
|
||||
SE(SE_CRYPTO_KEYTABLE_DST_REG_OFFSET) = SE_CRYPTO_KEYTABLE_DST_KEY_INDEX(ks_dst);
|
||||
|
||||
return _se_execute(OP_START, NULL, 0, input, 0x10);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -36,7 +36,8 @@ static const clock_t _clock_i2c[] = {
|
|||
/* I2C6 */ { 0 }
|
||||
};
|
||||
|
||||
static clock_t _clock_se = { CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, 0x42C, 0x1F, 0, 0 };
|
||||
static clock_t _clock_se = { CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_RST_CONTROLLER_CLK_SOURCE_SE, 0x1F, 0, 0 };
|
||||
static clock_t _clock_unk2 = { CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_RST_CONTROLLER_RST_SOURCE, 0x1E, 0, 0 };
|
||||
|
||||
static clock_t _clock_host1x = { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X, 0x1C, 4, 3 };
|
||||
static clock_t _clock_tsec = { CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_TSEC, 0x13, 0, 2 };
|
||||
|
|
@ -71,7 +72,7 @@ void clock_disable(const clock_t *clk)
|
|||
CLOCK(clk->enable) &= ~(1 << clk->index);
|
||||
}
|
||||
|
||||
void clock_enable_fuse(u32 enable)
|
||||
void clock_enable_fuse(bool enable)
|
||||
{
|
||||
CLOCK(CLK_RST_CONTROLLER_MISC_CLK_ENB) = (CLOCK(CLK_RST_CONTROLLER_MISC_CLK_ENB) & 0xEFFFFFFF) | ((enable & 1) << 28);
|
||||
}
|
||||
|
|
@ -86,11 +87,21 @@ void clock_enable_i2c(u32 idx)
|
|||
clock_enable(&_clock_i2c[idx]);
|
||||
}
|
||||
|
||||
void clock_disable_i2c(u32 idx)
|
||||
{
|
||||
clock_disable(&_clock_i2c[idx]);
|
||||
}
|
||||
|
||||
void clock_enable_se()
|
||||
{
|
||||
clock_enable(&_clock_se);
|
||||
}
|
||||
|
||||
void clock_enable_unk2()
|
||||
{
|
||||
clock_enable(&_clock_unk2);
|
||||
}
|
||||
|
||||
void clock_enable_host1x()
|
||||
{
|
||||
clock_enable(&_clock_host1x);
|
||||
|
|
@ -172,6 +183,11 @@ void clock_enable_coresight()
|
|||
clock_enable(&_clock_coresight);
|
||||
}
|
||||
|
||||
void clock_disable_coresight()
|
||||
{
|
||||
clock_disable(&_clock_coresight);
|
||||
}
|
||||
|
||||
#define L_SWR_SDMMC1_RST (1 << 14)
|
||||
#define L_SWR_SDMMC2_RST (1 << 9)
|
||||
#define L_SWR_SDMMC4_RST (1 << 15)
|
||||
|
|
|
|||
|
|
@ -57,6 +57,7 @@
|
|||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTB 0x17C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X 0x180
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTC 0x1A0
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C3 0x1B8
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC3 0x1BC
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_CSITE 0x1D4
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_EMC 0x19C
|
||||
|
|
@ -94,9 +95,11 @@
|
|||
#define CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRD 0x3A4
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_MSELECT 0x3B4
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 0x410
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SE 0x42C
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_V_SET 0x440
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_W_SET 0x448
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_W_CLR 0x44C
|
||||
#define CLK_RST_CONTROLLER_RST_CPUG_CMPLX_SET 0x450
|
||||
#define CLK_RST_CONTROLLER_RST_CPUG_CMPLX_CLR 0x454
|
||||
#define CLK_RST_CONTROLLER_UTMIP_PLL_CFG2 0x488
|
||||
#define CLK_RST_CONTROLLER_PLLE_AUX 0x48C
|
||||
|
|
@ -128,10 +131,12 @@ void clock_enable(const clock_t *clk);
|
|||
void clock_disable(const clock_t *clk);
|
||||
|
||||
/*! Clock control for specific hardware portions. */
|
||||
void clock_enable_fuse(u32 enable);
|
||||
void clock_enable_fuse(bool enable);
|
||||
void clock_enable_uart(u32 idx);
|
||||
void clock_enable_i2c(u32 idx);
|
||||
void clock_disable_i2c(u32 idx);
|
||||
void clock_enable_se();
|
||||
void clock_enable_unk2();
|
||||
void clock_enable_host1x();
|
||||
void clock_disable_host1x();
|
||||
void clock_enable_tsec();
|
||||
|
|
@ -147,6 +152,7 @@ void clock_disable_kfuse();
|
|||
void clock_enable_cl_dvfs();
|
||||
void clock_disable_cl_dvfs();
|
||||
void clock_enable_coresight();
|
||||
void clock_disable_coresight();
|
||||
void clock_sdmmc_config_clock_source(u32 *pout, u32 id, u32 val);
|
||||
void clock_sdmmc_get_params(u32 *pout, u16 *pdivisor, u32 type);
|
||||
int clock_sdmmc_is_not_reset_and_enabled(u32 id);
|
||||
|
|
|
|||
|
|
@ -21,24 +21,25 @@
|
|||
#include "../soc/pmc.h"
|
||||
#include "../soc/t210.h"
|
||||
#include "../power/max77620.h"
|
||||
#include "../power/max7762x.h"
|
||||
|
||||
void _cluster_enable_power()
|
||||
{
|
||||
u8 tmp = i2c_recv_byte(I2C_5, 0x3C, MAX77620_REG_AME_GPIO);
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_AME_GPIO, tmp & 0xDF);
|
||||
i2c_send_byte(I2C_5, 0x3C, MAX77620_REG_GPIO5, 0x09);
|
||||
u8 tmp = i2c_recv_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_AME_GPIO, tmp & 0xDF);
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO5, 0x09);
|
||||
|
||||
// Enable cores power.
|
||||
i2c_send_byte(I2C_5, 0x1B, 0x2, 0x20);
|
||||
i2c_send_byte(I2C_5, 0x1B, 0x3, 0x8D);
|
||||
i2c_send_byte(I2C_5, 0x1B, 0x0, 0xB7);
|
||||
i2c_send_byte(I2C_5, 0x1B, 0x1, 0xB7);
|
||||
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_CONTROL1_REG, MAX77621_NFSR_ENABLE);
|
||||
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_CONTROL2_REG, MAX77621_T_JUNCTION_120 | MAX77621_CKKADV_TRIP_DISABLE | MAX77621_INDUCTOR_NOMINAL);
|
||||
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_VOUT_REG, MAX77621_VOUT_ENABLE | 0x37);
|
||||
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_VOUT_DVC_REG, MAX77621_VOUT_ENABLE | 0x37);
|
||||
}
|
||||
|
||||
int _cluster_pmc_enable_partition(u32 part, u32 toggle)
|
||||
int _cluster_pmc_enable_partition(u32 part, u32 toggle, bool enable)
|
||||
{
|
||||
// Check if the partition has already been turned on.
|
||||
if (PMC(APBDEV_PMC_PWRGATE_STATUS) & part)
|
||||
if (enable && PMC(APBDEV_PMC_PWRGATE_STATUS) & part)
|
||||
return 1;
|
||||
|
||||
u32 i = 5001;
|
||||
|
|
@ -50,7 +51,7 @@ int _cluster_pmc_enable_partition(u32 part, u32 toggle)
|
|||
return 0;
|
||||
}
|
||||
|
||||
PMC(APBDEV_PMC_PWRGATE_TOGGLE) = toggle | 0x100;
|
||||
PMC(APBDEV_PMC_PWRGATE_TOGGLE) = toggle | (enable ? 0x100 : 0);
|
||||
|
||||
i = 5001;
|
||||
while (i > 0)
|
||||
|
|
@ -98,9 +99,9 @@ void cluster_boot_cpu0(u32 entry)
|
|||
CLOCK(CLK_RST_CONTROLLER_CPU_SOFTRST_CTRL2) &= 0xFFFFF000;
|
||||
|
||||
// Enable CPU rail.
|
||||
_cluster_pmc_enable_partition(1, 0);
|
||||
//Enable cluster 0 non-CPU.
|
||||
_cluster_pmc_enable_partition(0x8000, 15);
|
||||
_cluster_pmc_enable_partition(1, 0, true);
|
||||
// Enable cluster 0 non-CPU.
|
||||
_cluster_pmc_enable_partition(0x8000, 15, true);
|
||||
// Enable CE0.
|
||||
_cluster_pmc_enable_partition(0x4000, 14);
|
||||
|
||||
|
|
|
|||
|
|
@ -26,11 +26,11 @@ static u32 i2c_addrs[] = {
|
|||
|
||||
static void _i2c_wait(vu32 *base)
|
||||
{
|
||||
base[0x23] = 0x25;
|
||||
base[I2C_CONFIG_LOAD] = 0x25;
|
||||
for (u32 i = 0; i < 20; i++)
|
||||
{
|
||||
usleep(1);
|
||||
if (!(base[0x23] & 1))
|
||||
if (!(base[I2C_CONFIG_LOAD] & 1))
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
|
@ -44,16 +44,16 @@ static int _i2c_send_pkt(u32 idx, u32 x, u8 *buf, u32 size)
|
|||
memcpy(&tmp, buf, size);
|
||||
|
||||
vu32 *base = (vu32 *)i2c_addrs[idx];
|
||||
base[1] = x << 1; //Set x (send mode).
|
||||
base[3] = tmp; //Set value.
|
||||
base[0] = (2 * size - 2) | 0x2800; //Set size and send mode.
|
||||
base[I2C_CMD_ADDR0] = x << 1; //Set x (send mode).
|
||||
base[I2C_CMD_DATA1] = tmp; //Set value.
|
||||
base[I2C_CNFG] = (2 * size - 2) | 0x2800; //Set size and send mode.
|
||||
_i2c_wait(base); //Kick transaction.
|
||||
|
||||
base[0] = (base[0] & 0xFFFFFDFF) | 0x200;
|
||||
while (base[7] & 0x100)
|
||||
base[I2C_CNFG] = (base[I2C_CNFG] & 0xFFFFFDFF) | 0x200;
|
||||
while (base[I2C_STATUS] & 0x100)
|
||||
;
|
||||
|
||||
if (base[7] << 28)
|
||||
if (base[I2C_STATUS] << 28)
|
||||
return 0;
|
||||
|
||||
return 1;
|
||||
|
|
@ -65,18 +65,18 @@ static int _i2c_recv_pkt(u32 idx, u8 *buf, u32 size, u32 x)
|
|||
return 0;
|
||||
|
||||
vu32 *base = (vu32 *)i2c_addrs[idx];
|
||||
base[1] = (x << 1) | 1; // Set x (recv mode).
|
||||
base[0] = (2 * size - 2) | 0x2840; // Set size and recv mode.
|
||||
base[I2C_CMD_ADDR0] = (x << 1) | 1; // Set x (recv mode).
|
||||
base[I2C_CNFG] = (size - 1) << 1 | 0x2840; // Set size and recv mode.
|
||||
_i2c_wait(base); // Kick transaction.
|
||||
|
||||
base[0] = (base[0] & 0xFFFFFDFF) | 0x200;
|
||||
while (base[7] & 0x100)
|
||||
base[I2C_CNFG] = (base[I2C_CNFG] & 0xFFFFFDFF) | 0x200;
|
||||
while (base[I2C_STATUS] & 0x100)
|
||||
;
|
||||
|
||||
if (base[7] << 28)
|
||||
if (base[I2C_STATUS] << 28)
|
||||
return 0;
|
||||
|
||||
u32 tmp = base[3]; // Get value.
|
||||
u32 tmp = base[I2C_CMD_DATA1]; // Get LS value.
|
||||
memcpy(buf, &tmp, size);
|
||||
|
||||
return 1;
|
||||
|
|
@ -86,19 +86,19 @@ void i2c_init(u32 idx)
|
|||
{
|
||||
vu32 *base = (vu32 *)i2c_addrs[idx];
|
||||
|
||||
base[0x1B] = 0x50001;
|
||||
base[0x21] = 0x90003;
|
||||
base[I2C_CLK_DIVISOR_REGISTER] = 0x50001;
|
||||
base[I2C_BUS_CLEAR_CONFIG] = 0x90003;
|
||||
_i2c_wait(base);
|
||||
|
||||
for (u32 i = 0; i < 10; i++)
|
||||
{
|
||||
usleep(20000);
|
||||
if (base[0x1A] & 0x800)
|
||||
if (base[INTERRUPT_STATUS_REGISTER] & 0x800)
|
||||
break;
|
||||
}
|
||||
|
||||
(vu32)base[0x22];
|
||||
base[0x1A] = base[0x1A];
|
||||
(vu32)base[I2C_BUS_CLEAR_STATUS];
|
||||
base[INTERRUPT_STATUS_REGISTER] = base[INTERRUPT_STATUS_REGISTER];
|
||||
}
|
||||
|
||||
int i2c_send_buf_small(u32 idx, u32 x, u32 y, u8 *buf, u32 size)
|
||||
|
|
|
|||
|
|
@ -26,6 +26,17 @@
|
|||
#define I2C_5 4
|
||||
#define I2C_6 5
|
||||
|
||||
#define I2C_CNFG 0x00
|
||||
#define I2C_CMD_ADDR0 0x01
|
||||
#define I2C_CMD_DATA1 0x03
|
||||
#define I2C_CMD_DATA2 0x04
|
||||
#define I2C_STATUS 0x07
|
||||
#define INTERRUPT_STATUS_REGISTER 0x1A
|
||||
#define I2C_CLK_DIVISOR_REGISTER 0x1B
|
||||
#define I2C_BUS_CLEAR_CONFIG 0x21
|
||||
#define I2C_BUS_CLEAR_STATUS 0x22
|
||||
#define I2C_CONFIG_LOAD 0x23
|
||||
|
||||
void i2c_init(u32 idx);
|
||||
int i2c_send_buf_small(u32 idx, u32 x, u32 y, u8 *buf, u32 size);
|
||||
int i2c_recv_buf_small(u8 *buf, u32 size, u32 idx, u32 x, u32 y);
|
||||
|
|
|
|||
|
|
@ -19,9 +19,8 @@
|
|||
|
||||
#include "../utils/types.h"
|
||||
|
||||
#define BOOTROM_BASE 0x100000
|
||||
#define BOOTROM_SIZE 0x18000
|
||||
|
||||
#define BOOTROM_BASE 0x100000
|
||||
#define HOST1X_BASE 0x50000000
|
||||
#define BPMP_CACHE_BASE 0x50040000
|
||||
#define DISPLAY_A_BASE 0x54200000
|
||||
|
|
@ -48,9 +47,10 @@
|
|||
#define APB_MISC_BASE 0x70000000
|
||||
#define PINMUX_AUX_BASE 0x70003000
|
||||
#define UART_BASE 0x70006000
|
||||
#define PWM_BASE 0x7000A000
|
||||
#define RTC_BASE 0x7000E000
|
||||
#define PMC_BASE 0x7000E400
|
||||
#define SYSCTR0_BASE 0x7000F000
|
||||
#define SYSCTR0_BASE 0x700F0000
|
||||
#define FUSE_BASE 0x7000F800
|
||||
#define KFUSE_BASE 0x7000FC00
|
||||
#define SE_BASE 0x70012000
|
||||
|
|
@ -58,6 +58,7 @@
|
|||
#define EMC_BASE 0x7001B000
|
||||
#define MIPI_CAL_BASE 0x700E3000
|
||||
#define I2S_BASE 0x702D1000
|
||||
#define CL_DVFS_BASE 0x70110000
|
||||
|
||||
#define _REG(base, off) *(vu32 *)((base) + (off))
|
||||
|
||||
|
|
@ -95,6 +96,8 @@
|
|||
#define EMC(off) _REG(EMC_BASE, off)
|
||||
#define MIPI_CAL(off) _REG(MIPI_CAL_BASE, off)
|
||||
#define I2S(off) _REG(I2S_BASE, off)
|
||||
#define CL_DVFS(off) _REG(CL_DVFS_BASE, off)
|
||||
#define TEST_REG(off) _REG(0x0, off)
|
||||
|
||||
/*! Misc registers. */
|
||||
#define APB_MISC_PP_PINMUX_GLOBAL 0x40
|
||||
|
|
|
|||
|
|
@ -20,6 +20,7 @@
|
|||
#include "../soc/gpio.h"
|
||||
#include "../soc/t210.h"
|
||||
#include "util.h"
|
||||
#include "../power/max77620.h"
|
||||
|
||||
u32 btn_read()
|
||||
{
|
||||
|
|
@ -28,7 +29,7 @@ u32 btn_read()
|
|||
res |= BTN_VOL_DOWN;
|
||||
if (!gpio_read(GPIO_PORT_X, GPIO_PIN_6))
|
||||
res |= BTN_VOL_UP;
|
||||
if (i2c_recv_byte(4, 0x3C, 0x15) & 0x4)
|
||||
if (i2c_recv_byte(4, MAX77620_I2C_ADDR, 0x15) & 0x4)
|
||||
res |= BTN_POWER;
|
||||
return res;
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in a new issue