mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-26 11:42:09 +00:00
Code Issues Releases Activity
1299 commits 2 branches 75 tags 6.7 MiB
Commit graph

286 commits

Author SHA1 Message Date
CTCaer
0b2c2aa564 bdk: regulator 5V: improve management per SKU 2022-10-11 03:57:17 +03:00
CTCaer
2aa251c44f bdk: max77812: uncomment RAM regulator 2022-10-11 03:53:17 +03:00
CTCaer
c52c11e7bc bdk: mem: improve emc MRR reading 2022-10-11 03:51:12 +03:00
CTCaer
ff5ee9758d bdk: joycon: refactor some structs and comments 2022-10-11 03:49:18 +03:00
CTCaer
44b429d5cd bdk: display: Name panel 1040 to Sharp LQ055T1SW10 2022-10-11 03:45:49 +03:00
CTCaer
b891657fb6 bdk: tsec: fix regression on HOS 6.2.0 not booting 
With the latest BDK changes on enabling always on AHB redirect with a compile time flag, TSEC fw boot was regressed because it needs it off.

Always disable redirect and if the flag is enabled, enable it on exit.
 2022-07-11 22:28:09 +03:00
CTCaer
801ebd3543 bdk: xusb: fully clear device mode ctrl register on deinit 2022-07-11 22:13:13 +03:00
CTCaer
d259d6f6d6 bdk: watchdog: clear timer interrupt also in handling 2022-07-11 22:10:41 +03:00
CTCaer
70523e404f bdk: whitespace refactor 2022-07-11 22:10:11 +03:00
CTCaer
b787053c2d bdk: joycon: fixup hori pads 
For Hori game pads:
- Restore the no power down fix
- Revert RTS signal back to active high
 2022-07-01 13:47:41 +03:00
CTCaer
e921d8f51c bdk: update memory map with more used addresses 2022-06-29 12:13:04 +03:00
CTCaer
57c8fd1f8c bdk: fiq: watchdog handling 
`BDK_WATCHDOG_FIQ_ENABLE` enables watchdog handling.
`BDK_RESTART_BL_ON_WDT` causes a reload of bootloader on FIQ

These 2 are useful when wanting to detect and handle hangs.
 2022-06-29 12:12:03 +03:00
CTCaer
d38ddad873 bdk: display: correct night mode value 2022-06-27 10:27:18 +03:00
CTCaer
b0c0a86108 bdk: migrate timers/sleeps to timer driver 2022-06-27 10:22:19 +03:00
CTCaer
061e10152f bdk: timer: add timer/watchdog driver 2022-06-27 10:20:25 +03:00
CTCaer
b65b2d7f71 bdk: se: do not use heap for linked lists 2022-06-27 09:14:43 +03:00
CTCaer
50886382bf bdk: list: add LIST_FOREACH_INVERSE and LIST_FOREACH_ENTRY_INVERSE 2022-06-25 05:59:53 +03:00
CTCaer
2378bf2863 bdk: ini: simplify kv free 2022-06-25 05:56:11 +03:00
CTCaer
e5ddac5211 bdk: sdmmc: rename current limit to power limit 2022-06-25 05:53:04 +03:00
CTCaer
489e222aac bdk: sdmmc: expose csd/scr functions 2022-06-25 05:48:54 +03:00
CTCaer
16af97c79a uart: rename print to printf 2022-06-25 05:42:42 +03:00
CTCaer
bdb8f6d352 ccplex: name some flow control values 2022-06-25 05:42:19 +03:00
CTCaer
258a343e21 bdk: usb: support deconfiguration of endpoints 
TODO: Signal that to userspace and manage it.
 2022-06-14 18:48:21 +03:00
CTCaer
f6c9e636d1 bdk: usb: improve USB2/XUSB power down 
TODO: add more power downs on XUSB stack
 2022-06-14 18:46:46 +03:00
CTCaer
605f270f98 bdk: usb: fix a race condition in USB2 stack 
When RAM is slow (no training), it's possible to have the stack failing to negotiate configuration successfully.

The race condition is caused by not flushing cache before sending a configuration packet reply.
Although, cache is write-through, this needs to happen.
 2022-06-14 18:41:33 +03:00
CTCaer
c77c741c07 bdk: sdmmc: correct lower speed mode checks 
Both bus widths of 8 and 4 should be checked for HS200 support and host type support, instead of giving 8-bit bus width a free pass.
 2022-05-26 03:04:27 +03:00
CTCaer
bf00c79edb bdk: ini: add ini free 
Additionally, fix a bug where a list could not be initialized if section type is comment or caption.
 2022-05-19 15:03:00 +03:00
CTCaer
429074293a bdk: sprintf: no support for lower case hex and base that is not 10/16 2022-05-19 15:01:10 +03:00
CTCaer
2c768db542 bdk: heap: add nodes info 2022-05-19 14:53:02 +03:00
CTCaer
889317da58 bdk: sdmmc: add missing sd block size define 2022-05-16 13:34:36 +03:00
CTCaer
e09710e3eb bdk: fatfs: mkfs alignment changes 
- Default data alignment is now 1MB **when it's not set**
- Default volume alignment is now based on data alignment and not hardcoded to 16MB.
- Change max allowed alignment to 64MB.

The above changes allow selecting alignments for volume and data between 1MB and 64MB.
(From the previous 1 to 16MB for data and 16MB for volume).
 2022-05-16 13:33:38 +03:00
CTCaer
e9587a325c bdk: fuse: add ipatch support for T210B01 2022-05-16 13:05:12 +03:00
CTCaer
331f1926d1 bdk: display: remove unneeded pinmuxing on Aula 2022-05-16 10:16:24 +03:00
CTCaer
87fe374b3b bdk: uart: use 2 STOP bits based on baudrate 2022-05-14 12:25:02 +03:00
CTCaer
b56e788d12 bdk: pinmux: more proper uart pinmuxing 2022-05-14 12:20:57 +03:00
CTCaer
9e613a7600 bdk: hwinit: simplify uart debug port paths 2022-05-13 03:56:59 +03:00
CTCaer
b6384d5da5 bdk: utils: Set format attribute for s_printf 
This allows the custom sprintf to be recognized as printf by gcc and effectively doing format checking.

NOTE: 64bit formatting is not supported for now, even if gcc asks to be set.
 2022-05-12 16:40:34 +03:00
CTCaer
54b054c940 bdk: usb: add Sio support to hid gadget 2022-05-09 06:10:49 +03:00
CTCaer
f31170bb51 bdk: joycon: add Sio support (for Hoag) 2022-05-09 06:09:06 +03:00
CTCaer
f452d916c9 bdk: clock: add ext peripheral clock control 2022-05-09 06:08:39 +03:00
CTCaer
47d06d0e8a bdk: joycon: use flow control to improve packet integrity 2022-05-09 05:55:06 +03:00
CTCaer
2aed1b3b83 bdk: joycon: add 3 mbaud support and full init 
Additionally use states for proper init
 2022-05-09 05:48:10 +03:00
CTCaer
12aac3a0fc bdk: clock: add 3 megabaud support for UART 2022-05-09 05:47:08 +03:00
CTCaer
833a115eb2 bdk: joycon: improve and streamline jc detect 2022-05-09 05:39:45 +03:00
CTCaer
9f30c51bd1 bdk: joycon: refactor driver 2022-05-09 05:32:32 +03:00
CTCaer
f7bf4af3ec bdk: uart: refactor and add new functionality 
- Allow to set CTS/RTS mode (only specific combos supported for now)
- Support the above modes in receiving
- Set 2 stop bits to decreases errors on high baudrates
 2022-05-08 05:45:16 +03:00
CTCaer
ebe7b5a603 bdk: utils: add approx. square root calc for u64 2022-05-08 05:27:05 +03:00
CTCaer
ebf0db77ee bdk: sprintf: add negative number support for %d 
This will now force a number as negative if bit31 is set and properly create the relevant string.

That means that external handling in order to show sign is now not needed.
 2022-05-08 05:26:01 +03:00
CTCaer
81730c5f7e bdk: pinmux/pmc: add more defines 2022-05-08 05:22:41 +03:00
CTCaer
76d1b4e221 bdk: sdmmc: refactor defines 
And fix a bug with tuning trim values
 2022-05-08 05:21:29 +03:00