CTCaer
14a048a496
nyx: Add SD init info from bootloader
...
This shows info about the sd initialization process that happened on hekate main
2020-12-11 17:46:44 +02:00
CTCaer
fce59fba43
nyx: Add SD card AU info
2020-12-11 17:41:09 +02:00
CTCaer
685663dcf6
nyx: Add bis key print in console
2020-12-11 17:39:30 +02:00
CTCaer
cb61e856ad
hos: Fix bis keygen for keygen rev 11 (HOS 9.1.0+)
2020-12-11 17:39:05 +02:00
CTCaer
5b8fb9fb6b
Various refactoring and addition of comments
2020-12-11 17:25:59 +02:00
CTCaer
b8eff953c6
nyx: Utilize full shutdown based reboot for patched Erista also
2020-12-02 22:27:22 +02:00
CTCaer
cf1f94662c
sdram: Correct some dram names
2020-12-02 22:26:06 +02:00
CTCaer
d287d40208
hos: Add HOS 11.0.0 support
2020-12-02 02:41:32 +02:00
CTCaer
2aa1ce5390
nyx: Add eMMC and SD vendor id decoding into names
2020-12-02 02:11:22 +02:00
CTCaer
cf175fc00d
nyx: Add alternate power saving modes
...
T210:
By default max power savings is enabled.
By changing `newpowersave=` to 0, it reverts to the old behavior of smaller power savings.
This was added to mitigate some strange DRAM chips, hanging from constant frequency change of a 800 MHz - 1600 MHz back and forth.
T210B01:
Defaults to a simple loop with no power savings. That's because of untrained ram.
2020-12-02 02:07:31 +02:00
CTCaer
0954eb2b09
nyx: Use full shutdown based reboot on T210B01
...
That's because of how the system is exploited.
2020-12-02 01:45:12 +02:00
CTCaer
a1188505e8
usb: Add XUSB support mainly for T210B01
2020-12-02 01:13:52 +02:00
CTCaer
2424ecc4f0
Disable coreboot.rom chainloading for T210B01
...
Unlike all RCM payloads that are based on hekate's hwinit, coreboot does full power management before sdram init is run.
Because of that and because it doesn't support T210B01, it does not hang as expected and configures all regulators and pins which can be dangerous!
2020-12-02 00:57:32 +02:00
CTCaer
495907b8a4
sept: Mark as ready for Mariko
2020-07-04 21:36:37 +03:00
CTCaer
f9a1935762
nyx: Fix Dump pkg1/pkg2 and cal0 for Mariko
2020-07-04 21:36:04 +03:00
CTCaer
8ef9f888f6
hos: Add PK21 decryption support for Mariko
2020-07-04 21:35:26 +03:00
CTCaer
9b3e9724b7
hos: Add Mariko PK11 decryption and unpacking
2020-07-04 21:32:36 +03:00
CTCaer
8880dfab24
eks: Disallow on Mariko
2020-07-04 21:21:48 +03:00
CTCaer
5ffbbf40a5
hos: Add Mariko keygen
2020-07-04 21:13:25 +03:00
CTCaer
7acad84932
nyx: Disable TSEC keys status for T210B01
2020-07-04 21:04:57 +03:00
CTCaer
8d2230dc51
fuse: Correct fuse array size for T210B01
2020-07-04 21:04:20 +03:00
CTCaer
e4c0756ded
nyx: Add DRAM names info + Mariko new ram codes
2020-06-26 22:41:34 +03:00
CTCaer
1c9efa327c
Correct RCM patched status for Mariko
...
This also disallows AutoRCM for Mariko.
2020-06-26 22:40:06 +03:00
CTCaer
cabaa6cfb8
Utilize BIT macro everywhere
2020-11-26 01:41:45 +02:00
CTCaer
a84f1e5ee5
usb: Split descriptors to object and header
2020-11-15 14:10:00 +02:00
CTCaer
e45ffab5d8
Remove stray hekate cfg set. It's handled by default.
2020-11-15 14:00:35 +02:00
CTCaer
55568b037f
nyx: Properly calculate Ranks and Channels in hw info
2020-11-15 13:50:19 +02:00
CTCaer
b5df428e43
nyx: Create bootloader folder on screenshots if missing
2020-11-15 13:47:47 +02:00
CTCaer
67a03bbd85
eks: Use LOT0 for identification
2020-11-15 13:43:22 +02:00
CTCaer
32955380c7
nyx: Fix icons for backup/restore swap
2020-11-15 13:40:53 +02:00
CTCaer
485edb4883
emc: Rename Device to Rank
2020-11-15 13:23:37 +02:00
CTCaer
8f222fd0bd
main: Fix update.bin creation on first boot
2020-10-27 21:27:51 +02:00
CTCaer
1f5b371608
Refactor some names
...
Additionally:
- Do not retry to init sd if all modes failed in Nyx.
- Do not try to read/write if sdmmc controller and card are not initialized.
2020-10-23 06:32:24 +03:00
CTCaer
ce156ab4e7
hos: Automate some eks and bis checks
2020-10-20 11:53:28 +03:00
CTCaer
94235dd005
bm92t30: Add proper info
...
The driver will now show more charger supported profiles and will also show selected profile.
2020-10-20 10:42:57 +03:00
CTCaer
27b1f0e843
Various small fixes
2020-10-20 10:32:32 +03:00
CTCaer
dae7be8ec4
nyx: Allow disabling of Joycon
...
Setting `jcdisable=1` in nyx.ini disables the usage of Joycon completely.
This also disables the BT pairing data dumping tool.
2020-10-20 10:21:48 +03:00
CTCaer
2f5b52223c
config: Add bootloader protection
...
`bootprotect=1` enables protection of the `bootloader` folder inside HOS.
This disallows any reading/writing of the folder and its contents inside HOS, preventing any corruption of it.
This of course has the side-effect of homebrew that depend on it (e.g. hekate Toolbox) to not work fully.
2020-10-20 10:16:12 +03:00
CTCaer
85d43147ee
Bump hekate to v5.3.3 and Nyx to v0.9.4
2020-09-15 20:24:56 +03:00
CTCaer
e3e5dab0fc
nyx: Add USB Charger info
2020-09-15 20:14:56 +03:00
CTCaer
e7900b11b4
nyx: Allow L4T last part to be unaligned
2020-09-02 13:11:03 +03:00
CTCaer
461d14c39a
di: Correct panel id for AUO A062TAN02
2020-08-28 05:26:18 +03:00
CTCaer
3d05b58856
nyx: Add eMMC NAND cells life estimation
2020-08-15 12:33:11 +03:00
CTCaer
78c4e6510d
hos: Add backup bootloader support
2020-08-15 12:30:18 +03:00
CTCaer
cd76d5ac09
nyx: Fix hang on using B button after Launch window
2020-08-15 12:22:01 +03:00
CTCaer
9c2a064817
nyx: Allow SD removal without reloading Nyx
2020-08-15 12:21:25 +03:00
CTCaer
db2da89f69
nyx: Remove delay on JC calibration
...
This does not help with drifting as the logged values are always changing drastically.
2020-08-15 12:19:43 +03:00
CTCaer
4fc420616d
nyx: Control UART debug completely via makefile
...
Also enables LvGL log.
2020-08-13 10:21:00 +03:00
CTCaer
5140992a7b
nyx: Add proper info about SD write protect
2020-07-19 20:56:08 +03:00
CTCaer
b8ca88ee0a
exo: Change fatal names and add stack overflow
2020-07-18 12:53:05 +03:00
