CTCaer
c77c741c07
bdk: sdmmc: correct lower speed mode checks
...
Both bus widths of 8 and 4 should be checked for HS200 support and host type support, instead of giving 8-bit bus width a free pass.
2022-05-26 03:04:27 +03:00
CTCaer
bf00c79edb
bdk: ini: add ini free
...
Additionally, fix a bug where a list could not be initialized if section type is comment or caption.
2022-05-19 15:03:00 +03:00
CTCaer
429074293a
bdk: sprintf: no support for lower case hex and base that is not 10/16
2022-05-19 15:01:10 +03:00
CTCaer
2c768db542
bdk: heap: add nodes info
2022-05-19 14:53:02 +03:00
CTCaer
889317da58
bdk: sdmmc: add missing sd block size define
2022-05-16 13:34:36 +03:00
CTCaer
e09710e3eb
bdk: fatfs: mkfs alignment changes
...
- Default data alignment is now 1MB **when it's not set**
- Default volume alignment is now based on data alignment and not hardcoded to 16MB.
- Change max allowed alignment to 64MB.
The above changes allow selecting alignments for volume and data between 1MB and 64MB.
(From the previous 1 to 16MB for data and 16MB for volume).
2022-05-16 13:33:38 +03:00
CTCaer
e9587a325c
bdk: fuse: add ipatch support for T210B01
2022-05-16 13:05:12 +03:00
CTCaer
331f1926d1
bdk: display: remove unneeded pinmuxing on Aula
2022-05-16 10:16:24 +03:00
CTCaer
87fe374b3b
bdk: uart: use 2 STOP bits based on baudrate
2022-05-14 12:25:02 +03:00
CTCaer
b56e788d12
bdk: pinmux: more proper uart pinmuxing
2022-05-14 12:20:57 +03:00
CTCaer
9e613a7600
bdk: hwinit: simplify uart debug port paths
2022-05-13 03:56:59 +03:00
CTCaer
b6384d5da5
bdk: utils: Set format attribute for s_printf
...
This allows the custom sprintf to be recognized as printf by gcc and effectively doing format checking.
NOTE: 64bit formatting is not supported for now, even if gcc asks to be set.
2022-05-12 16:40:34 +03:00
CTCaer
54b054c940
bdk: usb: add Sio support to hid gadget
2022-05-09 06:10:49 +03:00
CTCaer
f31170bb51
bdk: joycon: add Sio support (for Hoag)
2022-05-09 06:09:06 +03:00
CTCaer
f452d916c9
bdk: clock: add ext peripheral clock control
2022-05-09 06:08:39 +03:00
CTCaer
47d06d0e8a
bdk: joycon: use flow control to improve packet integrity
2022-05-09 05:55:06 +03:00
CTCaer
2aed1b3b83
bdk: joycon: add 3 mbaud support and full init
...
Additionally use states for proper init
2022-05-09 05:48:10 +03:00
CTCaer
12aac3a0fc
bdk: clock: add 3 megabaud support for UART
2022-05-09 05:47:08 +03:00
CTCaer
833a115eb2
bdk: joycon: improve and streamline jc detect
2022-05-09 05:39:45 +03:00
CTCaer
9f30c51bd1
bdk: joycon: refactor driver
2022-05-09 05:32:32 +03:00
CTCaer
f7bf4af3ec
bdk: uart: refactor and add new functionality
...
- Allow to set CTS/RTS mode (only specific combos supported for now)
- Support the above modes in receiving
- Set 2 stop bits to decreases errors on high baudrates
2022-05-08 05:45:16 +03:00
CTCaer
ebe7b5a603
bdk: utils: add approx. square root calc for u64
2022-05-08 05:27:05 +03:00
CTCaer
ebf0db77ee
bdk: sprintf: add negative number support for %d
...
This will now force a number as negative if bit31 is set and properly create the relevant string.
That means that external handling in order to show sign is now not needed.
2022-05-08 05:26:01 +03:00
CTCaer
81730c5f7e
bdk: pinmux/pmc: add more defines
2022-05-08 05:22:41 +03:00
CTCaer
76d1b4e221
bdk: sdmmc: refactor defines
...
And fix a bug with tuning trim values
2022-05-08 05:21:29 +03:00
CTCaer
4a1cb1f2ea
bdk: fan: add Hoag and Aula SKUs support
...
Now that what was hanging Aula is found (using PWM with its clock disabled), add full support for fan control on both SKUs.
2022-05-08 05:07:38 +03:00
CTCaer
58a2094448
bdk: reg 5v: add support for Hoag and Aula SKUs
...
Add support back and make it more proper.
Also add fan regulator support also.
2022-05-08 05:05:39 +03:00
CTCaer
37de367fef
bdk: sdram: deduplicate dram configs
...
Additionally add info about new hynix chip and correct ids 3 and 5 on T210B01 based Switch.
2022-05-08 04:58:36 +03:00
CTCaer
450d95e573
bdk: di: correct samsung backlight set
...
Now that vblank writes are fixed we can return to proper backlight set.
Additionally, account for the pwm smoothing when backlight is turned off. That's to avoid visible green tint glitches when display is also turned off.
2022-05-08 04:53:13 +03:00
CTCaer
969a49edba
bdk: di: reselect winA when done with winD config
2022-05-08 04:49:28 +03:00
CTCaer
9908eb8bb3
bdk: di: samsung panel: better init
...
- Set display color profile to natural (it's still vivid but not overblown.)
- Enable PWM slope and set it to 6 frames in order to have smooth backlight transitions
2022-05-08 04:48:55 +03:00
CTCaer
56dcbb2b23
bdk: di: cleanup configs
...
Nintendo or Nvidia copied pasted the dynamic display code into static arrays in order to do the static hw init in bootloader and boot sysmodule.
Ofc that does double the work that is not needed at all, making it suboptimal.
Clean up every single config based on how tegra display interface hw works in order to save up space and make the process a bit faster.
2022-05-08 04:45:03 +03:00
CTCaer
b9f40fed7a
bdk: di: move plld setup code out of display obj
2022-05-08 04:41:05 +03:00
CTCaer
6ae4904c8f
bdk: di: make dsi normal/vblank writes more robust
2022-05-08 04:36:20 +03:00
CTCaer
dd2bb0f555
bdk: di: refractor configs
2022-05-08 04:34:44 +03:00
CTCaer
0b8cdaf0ea
bdk: di: split normal and vblank dsi reads
...
And also make vblank reads more robust
2022-05-08 04:23:31 +03:00
CTCaer
83c95d8a3b
bdk: sdram: update 20/21/22 ids for new dram
...
Dram chip is Samsung 4GB built on 1z-nm that allows for 40% lower power usage.
2022-03-23 02:20:55 +02:00
CTCaer
ff214f25c1
bdk: update l4t hekatf prep functions
2022-03-23 00:58:20 +02:00
CTCaer
0fef90dc4c
bdk: sd: return proper error for sd file save
2022-02-15 00:36:23 +02:00
CTCaer
ee465b98af
bdk: sdmmc correct exit on eMMC < 4.0 modules
2022-02-15 00:24:53 +02:00
CTCaer
83b895a062
bdk: heap: improvements
...
Correct types everywhere.
Add BDK_MALLOC_NO_DEFRAG that disables defragmentation on the heap.
2022-02-15 00:22:38 +02:00
CTCaer
ce8d1eca91
bdk: remove sd mounts from ianos and check if sd is mounted in sd ops
2022-02-15 00:17:53 +02:00
CTCaer
3f65a30b2e
bdk: more atf prep
2022-02-15 00:14:53 +02:00
CTCaer
7c74391754
bdk: bpmp: do not use full maintenance
...
Instead use proper clean/invalidation of dcache.
2022-02-15 00:14:14 +02:00
CTCaer
52bb6a96e5
bdk: nx emmc bis: fix out of cluster bounds accesses
2022-01-29 01:40:38 +02:00
CTCaer
6666dd4b46
bdk: fatfs: better PrFILE2 SAFE record creation
2022-01-29 01:40:05 +02:00
CTCaer
3fdb72ce37
bdk: i2c: correct order of spinlock wait
2022-01-29 01:34:01 +02:00
CTCaer
9a80f8b4b5
bdk: minerva: fix fsp op/wr check for l4t
2022-01-29 01:31:28 +02:00
CTCaer
ef5790cc2c
bdk: mc: always on ahb arbitration
...
- Removed disables
- SDMMC code now just checks if it has access
2022-01-29 01:29:02 +02:00
CTCaer
7bb8b1da62
di: restore window config wait for inv pitch and block linear
2022-01-29 01:26:00 +02:00
