CTCaer
47d06d0e8a
bdk: joycon: use flow control to improve packet integrity
2022-05-09 05:55:06 +03:00
CTCaer
2aed1b3b83
bdk: joycon: add 3 mbaud support and full init
...
Additionally use states for proper init
2022-05-09 05:48:10 +03:00
CTCaer
12aac3a0fc
bdk: clock: add 3 megabaud support for UART
2022-05-09 05:47:08 +03:00
CTCaer
833a115eb2
bdk: joycon: improve and streamline jc detect
2022-05-09 05:39:45 +03:00
CTCaer
9f30c51bd1
bdk: joycon: refactor driver
2022-05-09 05:32:32 +03:00
CTCaer
f7bf4af3ec
bdk: uart: refactor and add new functionality
...
- Allow to set CTS/RTS mode (only specific combos supported for now)
- Support the above modes in receiving
- Set 2 stop bits to decreases errors on high baudrates
2022-05-08 05:45:16 +03:00
CTCaer
ebe7b5a603
bdk: utils: add approx. square root calc for u64
2022-05-08 05:27:05 +03:00
CTCaer
ebf0db77ee
bdk: sprintf: add negative number support for %d
...
This will now force a number as negative if bit31 is set and properly create the relevant string.
That means that external handling in order to show sign is now not needed.
2022-05-08 05:26:01 +03:00
CTCaer
81730c5f7e
bdk: pinmux/pmc: add more defines
2022-05-08 05:22:41 +03:00
CTCaer
76d1b4e221
bdk: sdmmc: refactor defines
...
And fix a bug with tuning trim values
2022-05-08 05:21:29 +03:00
CTCaer
4a1cb1f2ea
bdk: fan: add Hoag and Aula SKUs support
...
Now that what was hanging Aula is found (using PWM with its clock disabled), add full support for fan control on both SKUs.
2022-05-08 05:07:38 +03:00
CTCaer
58a2094448
bdk: reg 5v: add support for Hoag and Aula SKUs
...
Add support back and make it more proper.
Also add fan regulator support also.
2022-05-08 05:05:39 +03:00
CTCaer
37de367fef
bdk: sdram: deduplicate dram configs
...
Additionally add info about new hynix chip and correct ids 3 and 5 on T210B01 based Switch.
2022-05-08 04:58:36 +03:00
CTCaer
450d95e573
bdk: di: correct samsung backlight set
...
Now that vblank writes are fixed we can return to proper backlight set.
Additionally, account for the pwm smoothing when backlight is turned off. That's to avoid visible green tint glitches when display is also turned off.
2022-05-08 04:53:13 +03:00
CTCaer
969a49edba
bdk: di: reselect winA when done with winD config
2022-05-08 04:49:28 +03:00
CTCaer
9908eb8bb3
bdk: di: samsung panel: better init
...
- Set display color profile to natural (it's still vivid but not overblown.)
- Enable PWM slope and set it to 6 frames in order to have smooth backlight transitions
2022-05-08 04:48:55 +03:00
CTCaer
56dcbb2b23
bdk: di: cleanup configs
...
Nintendo or Nvidia copied pasted the dynamic display code into static arrays in order to do the static hw init in bootloader and boot sysmodule.
Ofc that does double the work that is not needed at all, making it suboptimal.
Clean up every single config based on how tegra display interface hw works in order to save up space and make the process a bit faster.
2022-05-08 04:45:03 +03:00
CTCaer
b9f40fed7a
bdk: di: move plld setup code out of display obj
2022-05-08 04:41:05 +03:00
CTCaer
6ae4904c8f
bdk: di: make dsi normal/vblank writes more robust
2022-05-08 04:36:20 +03:00
CTCaer
dd2bb0f555
bdk: di: refractor configs
2022-05-08 04:34:44 +03:00
CTCaer
0b8cdaf0ea
bdk: di: split normal and vblank dsi reads
...
And also make vblank reads more robust
2022-05-08 04:23:31 +03:00
CTCaer
83c95d8a3b
bdk: sdram: update 20/21/22 ids for new dram
...
Dram chip is Samsung 4GB built on 1z-nm that allows for 40% lower power usage.
2022-03-23 02:20:55 +02:00
CTCaer
ff214f25c1
bdk: update l4t hekatf prep functions
2022-03-23 00:58:20 +02:00
CTCaer
0fef90dc4c
bdk: sd: return proper error for sd file save
2022-02-15 00:36:23 +02:00
CTCaer
ee465b98af
bdk: sdmmc correct exit on eMMC < 4.0 modules
2022-02-15 00:24:53 +02:00
CTCaer
83b895a062
bdk: heap: improvements
...
Correct types everywhere.
Add BDK_MALLOC_NO_DEFRAG that disables defragmentation on the heap.
2022-02-15 00:22:38 +02:00
CTCaer
ce8d1eca91
bdk: remove sd mounts from ianos and check if sd is mounted in sd ops
2022-02-15 00:17:53 +02:00
CTCaer
3f65a30b2e
bdk: more atf prep
2022-02-15 00:14:53 +02:00
CTCaer
7c74391754
bdk: bpmp: do not use full maintenance
...
Instead use proper clean/invalidation of dcache.
2022-02-15 00:14:14 +02:00
CTCaer
52bb6a96e5
bdk: nx emmc bis: fix out of cluster bounds accesses
2022-01-29 01:40:38 +02:00
CTCaer
6666dd4b46
bdk: fatfs: better PrFILE2 SAFE record creation
2022-01-29 01:40:05 +02:00
CTCaer
3fdb72ce37
bdk: i2c: correct order of spinlock wait
2022-01-29 01:34:01 +02:00
CTCaer
9a80f8b4b5
bdk: minerva: fix fsp op/wr check for l4t
2022-01-29 01:31:28 +02:00
CTCaer
ef5790cc2c
bdk: mc: always on ahb arbitration
...
- Removed disables
- SDMMC code now just checks if it has access
2022-01-29 01:29:02 +02:00
CTCaer
7bb8b1da62
di: restore window config wait for inv pitch and block linear
2022-01-29 01:26:00 +02:00
CTCaer
192a936a31
bdk: add NX eMMC BIS driver
2022-01-20 13:21:04 +02:00
CTCaer
8327de8e2e
bdk: replace NYX flag with proper flags
...
- BDK_MINERVA_CFG_FROM_RAM: enables support for getting minerva configuration from nyx storage
- BDK_HW_EXTRA_DEINIT: enables extra deinit in hw_reinit_workaround
- BDK_SDMMC_OC_AND_EXTRA_PRINT: enables eMMC OC support (533 MB/s) and extra error printing
2022-01-20 13:19:48 +02:00
CTCaer
960f3b23e7
bdk: ums: adhere to emmc ops changes also
2022-01-20 13:17:55 +02:00
CTCaer
b08e36a7b0
bdk: add emmc ops
...
- Add support for lower eMMC bus speed init in case of failures
- Add error count reporting
- Function names and defines changed from nx_emmc to emmc (except autorcm helper function)
- Enabling emuMMC support needs BDK_EMUMMC_ENABLE flag passed over
2022-01-20 13:14:38 +02:00
CTCaer
00110a8863
bdk: move sd ops into bdk
2022-01-20 12:48:41 +02:00
CTCaer
7ae4fd03c2
bdk: minerva: prep for ATF direct boot support
2022-01-20 12:43:24 +02:00
CTCaer
e071fe44b0
bdk: ini: reduce heap fragmentation/pressure
2022-01-20 12:41:20 +02:00
CTCaer
39d411dc68
bdk: uart: add uart va print
2022-01-20 12:39:32 +02:00
CTCaer
82f90fae28
bdk: utils: add vprintf
2022-01-20 12:37:41 +02:00
CTCaer
10e1f67dc5
bdk: utils: add strcpy with head/tail whitespace removal
2022-01-20 12:36:25 +02:00
CTCaer
10b479dc1c
bdk: clock: add apb/ahb clock control
2022-01-20 12:32:57 +02:00
CTCaer
3dd12321f8
bdk: add activity monitor driver
2022-01-20 12:32:02 +02:00
CTCaer
c1441a64c7
bdk: se: expose xts functions and add nx xts
2022-01-20 12:28:26 +02:00
CTCaer
0e35e68fd5
bdk: se: add t210b01 data coherency WAR
2022-01-20 12:27:25 +02:00
CTCaer
853f10f774
bdk: pmc: update tzram defines
2022-01-20 12:13:35 +02:00
