CTCaer
b1bc6ebdd8
bdk: joycon: utilize packet id per joycon
...
Also fix a possible infinite loop
2024-10-04 21:39:35 +03:00
CTCaer
9d79af231e
bdk: use static where it should
2024-06-02 07:09:34 +03:00
CTCaer
7a74761da9
bdk: bpmp: add and use bpmp_clk_rate_relaxed
2024-06-02 06:51:06 +03:00
CTCaer
93296c2c38
bdk: joycon: add packet size checks
...
Pass the real received data size and do the proper checks for minimum info.
2024-05-19 17:42:10 +03:00
CTCaer
7af343dd6c
bdk: input: make joycon detection more robust
...
There's a hw bug on the gpio controller that can latch the last value on reads.
Mitigate that by reading once to unlatch the input value.
Also actually allow sio to be polled every 8ms.
2024-05-19 10:19:25 +03:00
CTCaer
902ccede9a
bdk: joycon: use proper bits for batt levels
2024-04-25 04:45:50 +03:00
CTCaer
ce137852b7
bdk: change some defines and comments
2023-10-12 06:59:15 +03:00
CTCaer
fdf0dcc636
bdk: joycon: add info about sio imu report
2023-08-22 14:36:23 +03:00
CTCaer
9a98c1afb9
bdk: stylistic corrections
...
And update copyrights
2023-02-11 23:46:38 +02:00
CTCaer
5bb9a244ea
bdk: utilize new gpio functions
2023-02-11 23:08:32 +02:00
CTCaer
ff5ee9758d
bdk: joycon: refactor some structs and comments
2022-10-11 03:49:18 +03:00
CTCaer
70523e404f
bdk: whitespace refactor
2022-07-11 22:10:11 +03:00
CTCaer
b787053c2d
bdk: joycon: fixup hori pads
...
For Hori game pads:
- Restore the no power down fix
- Revert RTS signal back to active high
2022-07-01 13:47:41 +03:00
CTCaer
b0c0a86108
bdk: migrate timers/sleeps to timer driver
2022-06-27 10:22:19 +03:00
CTCaer
9e613a7600
bdk: hwinit: simplify uart debug port paths
2022-05-13 03:56:59 +03:00
CTCaer
f31170bb51
bdk: joycon: add Sio support (for Hoag)
2022-05-09 06:09:06 +03:00
CTCaer
47d06d0e8a
bdk: joycon: use flow control to improve packet integrity
2022-05-09 05:55:06 +03:00
CTCaer
2aed1b3b83
bdk: joycon: add 3 mbaud support and full init
...
Additionally use states for proper init
2022-05-09 05:48:10 +03:00
CTCaer
833a115eb2
bdk: joycon: improve and streamline jc detect
2022-05-09 05:39:45 +03:00
CTCaer
9f30c51bd1
bdk: joycon: refactor driver
2022-05-09 05:32:32 +03:00
CTCaer
f7bf4af3ec
bdk: uart: refactor and add new functionality
...
- Allow to set CTS/RTS mode (only specific combos supported for now)
- Support the above modes in receiving
- Set 2 stop bits to decreases errors on high baudrates
2022-05-08 05:45:16 +03:00
CTCaer
c29db97f73
hwinit/joycon: move uart clock deinits to joycon driver
2021-05-11 10:24:48 +03:00
CTCaer
d7ce2a81db
bpmp: return previous fid when setting a new one
2021-05-11 09:21:12 +03:00
CTCaer
513f77a2ad
uart: use proper interrupt decoding
2021-03-17 08:51:49 +02:00
CTCaer
7a27a7b3b5
joycon: Disable regulators before sending the sleep cmd
2021-02-08 03:49:04 +02:00
CTCaer
c6c396ce2a
reg5V: Manage battery source based on charger status
2021-01-11 21:30:59 +02:00
CTCaer
adf2045896
joycon: Do not send CRC if nxpad + some refactoring
2021-01-03 15:37:44 +02:00
Franz-Josef Haider
e491a4cf57
joycon: add support for the hori split pad pro
2020-12-31 13:54:00 +02:00
CTCaer
5b8fb9fb6b
Various refactoring and addition of comments
2020-12-11 17:25:59 +02:00
CTCaer
202540c7f7
joycon: Disable driver for Switch Lite
2020-12-02 00:51:29 +02:00
CTCaer
bbc3f41493
joycon: Fix controller button masking
...
Previously if the Right JC was missing it would clear the Capture button that's on the Left one
2020-11-15 13:10:44 +02:00
CTCaer
dae7be8ec4
nyx: Allow disabling of Joycon
...
Setting `jcdisable=1` in nyx.ini disables the usage of Joycon completely.
This also disables the BT pairing data dumping tool.
2020-10-20 10:21:48 +03:00
CTCaer
4fc420616d
nyx: Control UART debug completely via makefile
...
Also enables LvGL log.
2020-08-13 10:21:00 +03:00
CTCaer
638a3909c5
Refactor various variables and names
2020-07-17 18:00:32 +03:00
CTCaer
6e256d29c7
Utilize hekate's BDK for hekate main and Nyx
2020-06-14 16:45:45 +03:00
CTCaer
185526d134
Introducing Bootloader Development Kit (BDK)
...
BDK will allow developers to use the full collection of drivers,
with limited editing, if any, for making payloads for Nintendo Switch.
Using a single source for everything will also help decoupling
Switch specific code and easily port it to other Tegra X1/X1+ platforms.
And maybe even to lower targets.
Everything is now centrilized into bdk folder.
Every module or project can utilize it by simply including it.
This is just the start and it will continue to improve.
2020-06-14 15:25:21 +03:00
