CTCaer
b744f82942
nyx: report right stick coordinates in debug
...
- Add right stick x/y
- Remove calibration x/y min/max
2024-05-19 12:19:26 +03:00
CTCaer
c4567ab2b5
nyx: set touch indev also and name them
...
Just keep it around for any reference.
2024-05-19 12:08:47 +03:00
CTCaer
0544f9143f
nyx: tools: allow dynamic size for boot partitions
...
Let UMS driver set the size in case the partition is bigger.
That doesn't affect anything other than allowing the host to see the whole
physical partition.
2024-05-19 10:58:53 +03:00
CTCaer
a070d2e394
bdk: ums: allow real sizes for boot partitions
...
Since that's eMMC, do not clamp the size to 4MB.
That doesn't affect anything other than allowing the host to see the whole
physical partition .
2024-05-19 10:57:20 +03:00
CTCaer
927489d2da
bdk: add missed defines
2024-05-19 10:50:25 +03:00
CTCaer
5453c593a3
hekate/nyx: adhere to hw_deinit change
2024-05-19 10:49:46 +03:00
CTCaer
ae29f359ee
bdk: hwinit: rename reinit_workaround to deinit
2024-05-19 10:49:25 +03:00
CTCaer
7af343dd6c
bdk: input: make joycon detection more robust
...
There's a hw bug on the gpio controller that can latch the last value on reads.
Mitigate that by reading once to unlatch the input value.
Also actually allow sio to be polled every 8ms.
2024-05-19 10:19:25 +03:00
CTCaer
547a3542ee
bdk: display: add more defines
2024-05-19 10:16:52 +03:00
CTCaer
4bc0a0591c
bdk: display: wait 2us for bl pwm config to take
...
Fixes the tiny blink showing up while pwm is still at max.
2024-05-19 10:15:52 +03:00
CTCaer
1214ab0e02
ldr/bl: manage arbiter
2024-05-19 10:12:18 +03:00
CTCaer
985c513770
bdk: hwinit: add arbiter config
2024-05-19 10:07:06 +03:00
CTCaer
16eb6a3c44
bdk: types: do not overflow on byte swaps
...
Addresses warning message.
2024-04-25 16:57:43 +03:00
CTCaer
ef1e328e11
bdk: info: revamp eMMC partition table info
...
Allow a max of 20 partitions to be shown
2024-04-25 04:57:31 +03:00
CTCaer
856994e4f4
bdk: sprintf: add right padding support
2024-04-25 04:56:38 +03:00
CTCaer
77782b974c
nyx: info: report oem id for eMMC
2024-04-25 04:55:17 +03:00
CTCaer
38f4902e1d
nyx: info: change touch fw version format
2024-04-25 04:54:58 +03:00
CTCaer
90b9f9f589
hos: add comments about autonogc
2024-04-25 04:53:06 +03:00
CTCaer
ec2e62236a
bdk: pinmux: add i2s pin config
2024-04-25 04:52:13 +03:00
CTCaer
2648a2655c
bdk: sdram: add info about custom 8GB T210 config
...
That's a suggestion on which 4GB modules are certainly fine to use.
2024-04-25 04:50:07 +03:00
CTCaer
62153fdfbb
bdk: types: add likely/unlikely global macros
2024-04-25 04:48:09 +03:00
CTCaer
28960728f9
bdk: joycon: add bit numbers on the button struct
2024-04-25 04:46:27 +03:00
CTCaer
902ccede9a
bdk: joycon: use proper bits for batt levels
2024-04-25 04:45:50 +03:00
CTCaer
96efa7a002
bdk: vic: add support for P8 and R5G5B5
2024-04-25 04:44:22 +03:00
CTCaer
d92906db5e
bdk: display: correct some reg names and add more
2024-04-25 04:44:08 +03:00
CTCaer
e8d6516f43
bdk: display: use basic profile for OLED
...
That's the one with the accurate sRGB colors.
Anything else is over saturated.
2024-04-25 04:38:57 +03:00
CTCaer
a6727f6e32
bdk: display: update active regs on vsync for WinD
...
Doing that on hsync can cause issues on disable without actually syncing to it.
2024-04-25 04:38:04 +03:00
CTCaer
35ea35f6ad
hos: pkg2: do not exit loop when non nogc
2024-03-29 15:12:53 +02:00
CTCaer
9e1b2ee573
Bump hekate to v6.1.1 and Nyx to v1.6.1
2024-03-29 16:34:08 +02:00
CTCaer
9cfe1d2162
nyx: add info about 6.2" oem panel clone
2024-03-29 16:34:08 +02:00
CTCaer
cfbbafe72f
nyx: change imu cal warning message
2024-03-29 13:42:41 +02:00
CTCaer
5607fd18ea
hos: 18.0.0 support
2024-03-29 13:21:53 +02:00
CTCaer
d71903abf2
hos: simplify nogc patch
2024-03-29 13:21:53 +02:00
CTCaer
547cfca0c9
hos: simplify emummc patch
2024-03-29 13:21:53 +02:00
CTCaer
dca350bfe9
hos: use strcmp for kip name
...
KIP1 names are NULL terminated, so use strcmp to reduce codesize.
2024-03-29 13:21:53 +02:00
CTCaer
06b7a38d47
nyx: retry to dump imu cal and skip it failed
...
On devices with mangled cal0 imu calibration can now be skipped (still mandatory on Lite).
2024-03-29 13:21:53 +02:00
CTCaer
9567ba19c8
l4t: bump loader/firmware revisions
2024-03-29 13:21:53 +02:00
CTCaer
c9ff5179f9
exo: use mixed version identification
2024-03-29 13:21:53 +02:00
CTCaer
f764bf04b1
hos: reboot to ofw if stock fails
...
If package1 fails to be read and conditions are valid, reboot to OFW automatically when stock mode is enabled.
2024-03-29 13:21:53 +02:00
CTCaer
8b1486c74b
hekate: expose autorcm check
2024-03-29 13:21:53 +02:00
CTCaer
471b99366d
hos: small refactor
2024-03-29 13:21:53 +02:00
CTCaer
368ca21316
hos: fix sys counters reset and always apply it
2024-03-29 13:21:53 +02:00
CTCaer
c021aef9b0
fss: save fss0 for being able to free it if error
...
Also do not free secmon/kernel in case it's from fss
2024-03-29 13:21:53 +02:00
CTCaer
622f7124ac
fss: remove dynamic path
...
Atmosphere never implemented per sysMMC/emuMMC support for configs.
So remove path parsing to reduce codesize.
2024-03-29 13:21:53 +02:00
CTCaer
e846f4576e
bdk: minerva: l4t: adjust sdmmc1 la and freq table
...
- LA is tightened up
- Copied frequencies are now 204/408/800/1333/1600/OC (from 204/666/800/1600/OC)
2024-03-29 13:21:53 +02:00
CTCaer
42c02e97e8
bdk: display: add 6.2" panel clone
2024-03-29 13:21:53 +02:00
CTCaer
4b3014bc18
hos: pkg2: simple refactor
2024-03-29 13:21:53 +02:00
CTCaer
4effaab241
hekate/nyx: use zalloc where appropriate
2024-03-27 09:16:06 +02:00
CTCaer
d687b53249
bdk: heap: add zalloc and utilize it
2024-03-27 09:00:53 +02:00
CTCaer
9e41aa7759
bdk: smmu: refactor and update driver
...
- Allow ASID to be configured
- Allow 34-bit PAs
- Use special type for setting PDE/PTE config
- Initialize all pages as non accessible
- Add function for mapping 4MB regions directly
- Add SMMU heap reset function
- Correct address load OP to 32-bit and remove alignment on SMMU enable payload
- Refactor all defines
2024-03-14 09:21:06 +02:00
