CTCaer
ff5ee9758d
bdk: joycon: refactor some structs and comments
2022-10-11 03:49:18 +03:00
CTCaer
44b429d5cd
bdk: display: Name panel 1040 to Sharp LQ055T1SW10
2022-10-11 03:45:49 +03:00
CTCaer
b891657fb6
bdk: tsec: fix regression on HOS 6.2.0 not booting
...
With the latest BDK changes on enabling always on AHB redirect with a compile time flag, TSEC fw boot was regressed because it needs it off.
Always disable redirect and if the flag is enabled, enable it on exit.
2022-07-11 22:28:09 +03:00
CTCaer
801ebd3543
bdk: xusb: fully clear device mode ctrl register on deinit
2022-07-11 22:13:13 +03:00
CTCaer
d259d6f6d6
bdk: watchdog: clear timer interrupt also in handling
2022-07-11 22:10:41 +03:00
CTCaer
70523e404f
bdk: whitespace refactor
2022-07-11 22:10:11 +03:00
CTCaer
b787053c2d
bdk: joycon: fixup hori pads
...
For Hori game pads:
- Restore the no power down fix
- Revert RTS signal back to active high
2022-07-01 13:47:41 +03:00
CTCaer
e921d8f51c
bdk: update memory map with more used addresses
2022-06-29 12:13:04 +03:00
CTCaer
57c8fd1f8c
bdk: fiq: watchdog handling
...
`BDK_WATCHDOG_FIQ_ENABLE` enables watchdog handling.
`BDK_RESTART_BL_ON_WDT` causes a reload of bootloader on FIQ
These 2 are useful when wanting to detect and handle hangs.
2022-06-29 12:12:03 +03:00
CTCaer
d38ddad873
bdk: display: correct night mode value
2022-06-27 10:27:18 +03:00
CTCaer
b0c0a86108
bdk: migrate timers/sleeps to timer driver
2022-06-27 10:22:19 +03:00
CTCaer
061e10152f
bdk: timer: add timer/watchdog driver
2022-06-27 10:20:25 +03:00
CTCaer
b65b2d7f71
bdk: se: do not use heap for linked lists
2022-06-27 09:14:43 +03:00
CTCaer
50886382bf
bdk: list: add LIST_FOREACH_INVERSE and LIST_FOREACH_ENTRY_INVERSE
2022-06-25 05:59:53 +03:00
CTCaer
2378bf2863
bdk: ini: simplify kv free
2022-06-25 05:56:11 +03:00
CTCaer
e5ddac5211
bdk: sdmmc: rename current limit to power limit
2022-06-25 05:53:04 +03:00
CTCaer
489e222aac
bdk: sdmmc: expose csd/scr functions
2022-06-25 05:48:54 +03:00
CTCaer
16af97c79a
uart: rename print to printf
2022-06-25 05:42:42 +03:00
CTCaer
bdb8f6d352
ccplex: name some flow control values
2022-06-25 05:42:19 +03:00
CTCaer
258a343e21
bdk: usb: support deconfiguration of endpoints
...
TODO: Signal that to userspace and manage it.
2022-06-14 18:48:21 +03:00
CTCaer
f6c9e636d1
bdk: usb: improve USB2/XUSB power down
...
TODO: add more power downs on XUSB stack
2022-06-14 18:46:46 +03:00
CTCaer
605f270f98
bdk: usb: fix a race condition in USB2 stack
...
When RAM is slow (no training), it's possible to have the stack failing to negotiate configuration successfully.
The race condition is caused by not flushing cache before sending a configuration packet reply.
Although, cache is write-through, this needs to happen.
2022-06-14 18:41:33 +03:00
CTCaer
c77c741c07
bdk: sdmmc: correct lower speed mode checks
...
Both bus widths of 8 and 4 should be checked for HS200 support and host type support, instead of giving 8-bit bus width a free pass.
2022-05-26 03:04:27 +03:00
CTCaer
bf00c79edb
bdk: ini: add ini free
...
Additionally, fix a bug where a list could not be initialized if section type is comment or caption.
2022-05-19 15:03:00 +03:00
CTCaer
429074293a
bdk: sprintf: no support for lower case hex and base that is not 10/16
2022-05-19 15:01:10 +03:00
CTCaer
2c768db542
bdk: heap: add nodes info
2022-05-19 14:53:02 +03:00
CTCaer
889317da58
bdk: sdmmc: add missing sd block size define
2022-05-16 13:34:36 +03:00
CTCaer
e09710e3eb
bdk: fatfs: mkfs alignment changes
...
- Default data alignment is now 1MB **when it's not set**
- Default volume alignment is now based on data alignment and not hardcoded to 16MB.
- Change max allowed alignment to 64MB.
The above changes allow selecting alignments for volume and data between 1MB and 64MB.
(From the previous 1 to 16MB for data and 16MB for volume).
2022-05-16 13:33:38 +03:00
CTCaer
e9587a325c
bdk: fuse: add ipatch support for T210B01
2022-05-16 13:05:12 +03:00
CTCaer
331f1926d1
bdk: display: remove unneeded pinmuxing on Aula
2022-05-16 10:16:24 +03:00
CTCaer
87fe374b3b
bdk: uart: use 2 STOP bits based on baudrate
2022-05-14 12:25:02 +03:00
CTCaer
b56e788d12
bdk: pinmux: more proper uart pinmuxing
2022-05-14 12:20:57 +03:00
CTCaer
9e613a7600
bdk: hwinit: simplify uart debug port paths
2022-05-13 03:56:59 +03:00
CTCaer
b6384d5da5
bdk: utils: Set format attribute for s_printf
...
This allows the custom sprintf to be recognized as printf by gcc and effectively doing format checking.
NOTE: 64bit formatting is not supported for now, even if gcc asks to be set.
2022-05-12 16:40:34 +03:00
CTCaer
54b054c940
bdk: usb: add Sio support to hid gadget
2022-05-09 06:10:49 +03:00
CTCaer
f31170bb51
bdk: joycon: add Sio support (for Hoag)
2022-05-09 06:09:06 +03:00
CTCaer
f452d916c9
bdk: clock: add ext peripheral clock control
2022-05-09 06:08:39 +03:00
CTCaer
47d06d0e8a
bdk: joycon: use flow control to improve packet integrity
2022-05-09 05:55:06 +03:00
CTCaer
2aed1b3b83
bdk: joycon: add 3 mbaud support and full init
...
Additionally use states for proper init
2022-05-09 05:48:10 +03:00
CTCaer
12aac3a0fc
bdk: clock: add 3 megabaud support for UART
2022-05-09 05:47:08 +03:00
CTCaer
833a115eb2
bdk: joycon: improve and streamline jc detect
2022-05-09 05:39:45 +03:00
CTCaer
9f30c51bd1
bdk: joycon: refactor driver
2022-05-09 05:32:32 +03:00
CTCaer
f7bf4af3ec
bdk: uart: refactor and add new functionality
...
- Allow to set CTS/RTS mode (only specific combos supported for now)
- Support the above modes in receiving
- Set 2 stop bits to decreases errors on high baudrates
2022-05-08 05:45:16 +03:00
CTCaer
ebe7b5a603
bdk: utils: add approx. square root calc for u64
2022-05-08 05:27:05 +03:00
CTCaer
ebf0db77ee
bdk: sprintf: add negative number support for %d
...
This will now force a number as negative if bit31 is set and properly create the relevant string.
That means that external handling in order to show sign is now not needed.
2022-05-08 05:26:01 +03:00
CTCaer
81730c5f7e
bdk: pinmux/pmc: add more defines
2022-05-08 05:22:41 +03:00
CTCaer
76d1b4e221
bdk: sdmmc: refactor defines
...
And fix a bug with tuning trim values
2022-05-08 05:21:29 +03:00
CTCaer
4a1cb1f2ea
bdk: fan: add Hoag and Aula SKUs support
...
Now that what was hanging Aula is found (using PWM with its clock disabled), add full support for fan control on both SKUs.
2022-05-08 05:07:38 +03:00
CTCaer
58a2094448
bdk: reg 5v: add support for Hoag and Aula SKUs
...
Add support back and make it more proper.
Also add fan regulator support also.
2022-05-08 05:05:39 +03:00
CTCaer
37de367fef
bdk: sdram: deduplicate dram configs
...
Additionally add info about new hynix chip and correct ids 3 and 5 on T210B01 based Switch.
2022-05-08 04:58:36 +03:00
