mirror of
https://github.com/CTCaer/hekate.git
synced 2024-11-30 05:22:05 +00:00
264 lines
9.1 KiB
C
264 lines
9.1 KiB
C
/*
|
|
* Copyright (c) 2018 naehrwert
|
|
* Copyright (c) 2018 CTCaer
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <string.h>
|
|
|
|
#include "hw_init.h"
|
|
#include "../gfx/di.h"
|
|
#include "../mem/mc.h"
|
|
#include "../mem/sdram.h"
|
|
#include "../power/max77620.h"
|
|
#include "../power/max7762x.h"
|
|
#include "../sec/se.h"
|
|
#include "../sec/se_t210.h"
|
|
#include "../soc/clock.h"
|
|
#include "../soc/fuse.h"
|
|
#include "../soc/gpio.h"
|
|
#include "../soc/i2c.h"
|
|
#include "../soc/pinmux.h"
|
|
#include "../soc/pmc.h"
|
|
#include "../soc/t210.h"
|
|
#include "../soc/uart.h"
|
|
#include "../storage/sdmmc.h"
|
|
#include "../utils/util.h"
|
|
|
|
extern sdmmc_t sd_sdmmc;
|
|
|
|
void _config_oscillators()
|
|
{
|
|
CLOCK(CLK_RST_CONTROLLER_SPARE_REG0) = (CLOCK(CLK_RST_CONTROLLER_SPARE_REG0) & 0xFFFFFFF3) | 4;
|
|
SYSCTR0(SYSCTR0_CNTFID0) = 19200000;
|
|
TMR(TIMERUS_USEC_CFG) = 0x45F; // For 19.2MHz clk_m.
|
|
CLOCK(CLK_RST_CONTROLLER_OSC_CTRL) = 0x50000071;
|
|
PMC(APBDEV_PMC_OSC_EDPD_OVER) = (PMC(APBDEV_PMC_OSC_EDPD_OVER) & 0xFFFFFF81) | 0xE;
|
|
PMC(APBDEV_PMC_OSC_EDPD_OVER) = (PMC(APBDEV_PMC_OSC_EDPD_OVER) & 0xFFBFFFFF) | 0x400000;
|
|
PMC(APBDEV_PMC_CNTRL2) = (PMC(APBDEV_PMC_CNTRL2) & 0xFFFFEFFF) | 0x1000;
|
|
PMC(APBDEV_PMC_SCRATCH188) = (PMC(APBDEV_PMC_SCRATCH188) & 0xFCFFFFFF) | 0x2000000;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 0x10;
|
|
CLOCK(CLK_RST_CONTROLLER_PLLMB_BASE) &= 0xBFFFFFFF;
|
|
PMC(APBDEV_PMC_TSC_MULT) = (PMC(APBDEV_PMC_TSC_MULT) & 0xFFFF0000) | 0x249F; //0x249F = 19200000 * (16 / 32.768 kHz)
|
|
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20004444;
|
|
CLOCK(CLK_RST_CONTROLLER_SUPER_SCLK_DIVIDER) = 0x80000000;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 2;
|
|
}
|
|
|
|
void _config_gpios()
|
|
{
|
|
PINMUX_AUX(PINMUX_AUX_UART2_TX) = 0;
|
|
PINMUX_AUX(PINMUX_AUX_UART3_TX) = 0;
|
|
|
|
PINMUX_AUX(PINMUX_AUX_GPIO_PE6) = PINMUX_INPUT_ENABLE;
|
|
PINMUX_AUX(PINMUX_AUX_GPIO_PH6) = PINMUX_INPUT_ENABLE;
|
|
|
|
#if !defined (DEBUG_UART_PORT) || DEBUG_UART_PORT != UART_B
|
|
gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_GPIO);
|
|
#endif
|
|
#if !defined (DEBUG_UART_PORT) || DEBUG_UART_PORT != UART_C
|
|
gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_GPIO);
|
|
#endif
|
|
gpio_config(GPIO_PORT_E, GPIO_PIN_6, GPIO_MODE_GPIO);
|
|
gpio_config(GPIO_PORT_H, GPIO_PIN_6, GPIO_MODE_GPIO);
|
|
gpio_output_enable(GPIO_PORT_G, GPIO_PIN_0, GPIO_OUTPUT_DISABLE);
|
|
gpio_output_enable(GPIO_PORT_D, GPIO_PIN_1, GPIO_OUTPUT_DISABLE);
|
|
gpio_output_enable(GPIO_PORT_E, GPIO_PIN_6, GPIO_OUTPUT_DISABLE);
|
|
gpio_output_enable(GPIO_PORT_H, GPIO_PIN_6, GPIO_OUTPUT_DISABLE);
|
|
|
|
pinmux_config_i2c(I2C_1);
|
|
pinmux_config_i2c(I2C_5);
|
|
pinmux_config_uart(UART_A);
|
|
|
|
// Configure volume up/down as inputs.
|
|
gpio_config(GPIO_PORT_X, GPIO_PIN_6, GPIO_MODE_GPIO);
|
|
gpio_config(GPIO_PORT_X, GPIO_PIN_7, GPIO_MODE_GPIO);
|
|
gpio_output_enable(GPIO_PORT_X, GPIO_PIN_6, GPIO_OUTPUT_DISABLE);
|
|
gpio_output_enable(GPIO_PORT_X, GPIO_PIN_7, GPIO_OUTPUT_DISABLE);
|
|
}
|
|
|
|
void _config_pmc_scratch()
|
|
{
|
|
PMC(APBDEV_PMC_SCRATCH20) &= 0xFFF3FFFF;
|
|
PMC(APBDEV_PMC_SCRATCH190) &= 0xFFFFFFFE;
|
|
PMC(APBDEV_PMC_SECURE_SCRATCH21) |= 0x10;
|
|
}
|
|
|
|
void _mbist_workaround()
|
|
{
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) | 0x8000) & 0xFFFFBFFF;
|
|
CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) |= 0x40800000u;
|
|
CLOCK(CLK_RST_CONTROLLER_RST_DEV_Y_CLR) = 0x40;
|
|
CLOCK(CLK_RST_CONTROLLER_RST_DEV_X_CLR) = 0x40000;
|
|
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = 0x18000000;
|
|
usleep(2);
|
|
|
|
I2S(I2S1_CTRL) |= I2S_CTRL_MASTER_EN;
|
|
I2S(I2S1_CG) &= ~I2S_CG_SLCG_ENABLE;
|
|
I2S(I2S2_CTRL) |= I2S_CTRL_MASTER_EN;
|
|
I2S(I2S2_CG) &= ~I2S_CG_SLCG_ENABLE;
|
|
I2S(I2S3_CTRL) |= I2S_CTRL_MASTER_EN;
|
|
I2S(I2S3_CG) &= ~I2S_CG_SLCG_ENABLE;
|
|
I2S(I2S4_CTRL) |= I2S_CTRL_MASTER_EN;
|
|
I2S(I2S4_CG) &= ~I2S_CG_SLCG_ENABLE;
|
|
I2S(I2S5_CTRL) |= I2S_CTRL_MASTER_EN;
|
|
I2S(I2S5_CG) &= ~I2S_CG_SLCG_ENABLE;
|
|
DISPLAY_A(_DIREG(DC_COM_DSC_TOP_CTL)) |= 4;
|
|
VIC(0x8C) = 0xFFFFFFFF;
|
|
usleep(2);
|
|
|
|
CLOCK(CLK_RST_CONTROLLER_RST_DEV_Y_SET) = 0x40;
|
|
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = 0x18000000;
|
|
CLOCK(CLK_RST_CONTROLLER_RST_DEV_X_SET) = 0x40000;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_H) = 0xC0;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) = 0x80000130;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_U) = 0x1F00200;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) = 0x80400808;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_W) = 0x402000FC;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_X) = 0x23000780;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) = 0x300;
|
|
CLOCK(CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRA) = 0;
|
|
CLOCK(CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRB) = 0;
|
|
CLOCK(CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRC) = 0;
|
|
CLOCK(CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRD) = 0;
|
|
CLOCK(CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRE) = 0;
|
|
CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) &= 0x1F7FFFFF;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) &= 0xFFFF3FFF;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_VI) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_VI) & 0x1FFFFFFF) | 0x80000000;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X) & 0x1FFFFFFF) | 0x80000000;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_NVENC) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_NVENC) & 0x1FFFFFFF) | 0x80000000;
|
|
}
|
|
|
|
void _config_se_brom()
|
|
{
|
|
// Bootrom part we skipped.
|
|
u32 sbk[4] = {
|
|
FUSE(FUSE_PRIVATE_KEY0),
|
|
FUSE(FUSE_PRIVATE_KEY1),
|
|
FUSE(FUSE_PRIVATE_KEY2),
|
|
FUSE(FUSE_PRIVATE_KEY3)
|
|
};
|
|
// Set SBK to slot 14.
|
|
se_aes_key_set(14, sbk, 0x10);
|
|
|
|
// Lock SBK from being read.
|
|
SE(SE_KEY_TABLE_ACCESS_REG_OFFSET + 14 * 4) = 0x7E;
|
|
|
|
// This memset needs to happen here, else TZRAM will behave weirdly later on.
|
|
memset((void *)TZRAM_BASE, 0, 0x10000);
|
|
PMC(APBDEV_PMC_CRYPTO_OP) = 0;
|
|
SE(SE_INT_STATUS_REG_OFFSET) = 0x1F;
|
|
|
|
// Lock SSK (although it's not set and unused anyways).
|
|
SE(SE_KEY_TABLE_ACCESS_REG_OFFSET + 15 * 4) = 0x7E;
|
|
|
|
// Clear the boot reason to avoid problems later
|
|
PMC(APBDEV_PMC_SCRATCH200) = 0x0;
|
|
PMC(APBDEV_PMC_RST_STATUS) = 0x0;
|
|
APB_MISC(APB_MISC_PP_STRAPPING_OPT_A) = (APB_MISC(APB_MISC_PP_STRAPPING_OPT_A) & 0xF0) | (7 << 10);
|
|
}
|
|
|
|
void config_hw()
|
|
{
|
|
// Bootrom stuff we skipped by going through rcm.
|
|
_config_se_brom();
|
|
//FUSE(FUSE_PRIVATEKEYDISABLE) = 0x11;
|
|
SYSREG(AHB_AHB_SPARE_REG) &= 0xFFFFFF9F;
|
|
PMC(APBDEV_PMC_SCRATCH49) = ((PMC(APBDEV_PMC_SCRATCH49) >> 1) << 1) & 0xFFFFFFFD;
|
|
|
|
_mbist_workaround();
|
|
clock_enable_se();
|
|
|
|
// Enable fuse clock.
|
|
clock_enable_fuse(true);
|
|
// Disable fuse programming.
|
|
fuse_disable_program();
|
|
|
|
mc_enable();
|
|
|
|
_config_oscillators();
|
|
APB_MISC(APB_MISC_PP_PINMUX_GLOBAL) = 0;
|
|
_config_gpios();
|
|
|
|
#ifdef DEBUG_UART_PORT
|
|
clock_enable_uart(DEBUG_UART_PORT);
|
|
uart_init(DEBUG_UART_PORT, 115200);
|
|
#endif
|
|
|
|
clock_enable_cl_dvfs();
|
|
|
|
clock_enable_i2c(I2C_1);
|
|
clock_enable_i2c(I2C_5);
|
|
|
|
clock_enable_unk2();
|
|
|
|
i2c_init(I2C_1);
|
|
i2c_init(I2C_5);
|
|
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CNFGBBC, 0x40);
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_ONOFFCNFG1, 0x78); // PWR delay for forced shutdown off.
|
|
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG0, 0x38);
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG1, 0x3A);
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG2, 0x38);
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_LDO4, 0xF);
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_LDO8, 0xC7);
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD0, 0x4F);
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD1, 0x29);
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_SD3, 0x1B);
|
|
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_GPIO3, 0x22); // 3.x+
|
|
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD0, 42); //42 = (1125000uV - 600000) / 12500 -> 1.125V
|
|
|
|
_config_pmc_scratch(); // Missing from 4.x+
|
|
|
|
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = (CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) & 0xFFFF8888) | 0x3333;
|
|
|
|
sdram_init();
|
|
}
|
|
|
|
void reconfig_hw_workaround(bool extra_reconfig, u32 magic)
|
|
{
|
|
// Re-enable clocks to Audio Processing Engine as a workaround to hanging.
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) |= (1 << 10); // Enable AHUB clock.
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) |= (1 << 6); // Enable APE clock.
|
|
|
|
if (extra_reconfig)
|
|
{
|
|
msleep(10);
|
|
PMC(APBDEV_PMC_PWR_DET_VAL) |= PMC_PWR_DET_SDMMC1_IO_EN;
|
|
|
|
clock_disable_cl_dvfs();
|
|
|
|
// Disable Joy-con GPIOs.
|
|
gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_SPIO);
|
|
gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_SPIO);
|
|
gpio_config(GPIO_PORT_E, GPIO_PIN_6, GPIO_MODE_SPIO);
|
|
gpio_config(GPIO_PORT_H, GPIO_PIN_6, GPIO_MODE_SPIO);
|
|
}
|
|
|
|
// Power off display.
|
|
display_end();
|
|
|
|
// Enable clock to USBD and init SDMMC1 to avoid hangs with bad hw inits.
|
|
if (magic == 0xBAADF00D)
|
|
{
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) |= (1 << 22);
|
|
sdmmc_init(&sd_sdmmc, SDMMC_1, SDMMC_POWER_3_3, SDMMC_BUS_WIDTH_1, 5, 0);
|
|
clock_disable_cl_dvfs();
|
|
|
|
msleep(200);
|
|
}
|
|
}
|