mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-01 00:11:43 +00:00
Code Issues Releases Activity
hekate/bdk/mem/sdram_param_t210.h
CTCaer 185526d134 Introducing Bootloader Development Kit (BDK) 
BDK will allow developers to use the full collection of drivers,
with limited editing, if any, for making payloads for Nintendo Switch.

Using a single source for everything will also help decoupling
Switch specific code and easily port it to other Tegra X1/X1+ platforms.
And maybe even to lower targets.

Everything is now centrilized into bdk folder.
Every module or project can utilize it by simply including it.

This is just the start and it will continue to improve.
2020-06-14 15:25:21 +03:00

930 lines
27 KiB
C
Raw Blame History

/*
* Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* See file CREDITS for list of people who contributed to this
* project.
*/
/**
* Defines the SDRAM parameter structure.
*
* Note that PLLM is used by EMC.
*/
#ifndef _SDRAM_PARAM_T210_H_
#define _SDRAM_PARAM_T210_H_
#define MEMORY_TYPE_NONE 0
#define MEMORY_TYPE_DDR 0
#define MEMORY_TYPE_LPDDR 0
#define MEMORY_TYPE_DDR2 0
#define MEMORY_TYPE_LPDDR2 1
#define MEMORY_TYPE_DDR3L 2
#define MEMORY_TYPE_LPDDR4 3
/**
* Defines the SDRAM parameter structure
*/
typedef struct _sdram_params
{
/* Specifies the type of memory device */
u32 memory_type;
/* MC/EMC clock source configuration */
/* Specifies the M value for PllM */
u32 pllm_input_divider;
/* Specifies the N value for PllM */
u32 pllm_feedback_divider;
/* Specifies the time to wait for PLLM to lock (in microseconds) */
u32 pllm_stable_time;
/* Specifies misc. control bits */
u32 pllm_setup_control;
/* Specifies the P value for PLLM */
u32 pllm_post_divider;
/* Specifies value for Charge Pump Gain Control */
u32 pllm_kcp;
/* Specifies VCO gain */
u32 pllm_kvco;
/* Spare BCT param */
u32 emc_bct_spare0;
/* Spare BCT param */
u32 emc_bct_spare1;
/* Spare BCT param */
u32 emc_bct_spare2;
/* Spare BCT param */
u32 emc_bct_spare3;
/* Spare BCT param */
u32 emc_bct_spare4;
/* Spare BCT param */
u32 emc_bct_spare5;
/* Spare BCT param */
u32 emc_bct_spare6;
/* Spare BCT param */
u32 emc_bct_spare7;
/* Spare BCT param */
u32 emc_bct_spare8;
/* Spare BCT param */
u32 emc_bct_spare9;
/* Spare BCT param */
u32 emc_bct_spare10;
/* Spare BCT param */
u32 emc_bct_spare11;
/* Spare BCT param */
u32 emc_bct_spare12;
/* Spare BCT param */
u32 emc_bct_spare13;
/* Defines EMC_2X_CLK_SRC, EMC_2X_CLK_DIVISOR, EMC_INVERT_DCD */
u32 emc_clock_source;
u32 emc_clock_source_dll;
/* Defines possible override for PLLLM_MISC2 */
u32 clk_rst_pllm_misc20_override;
/* enables override for PLLLM_MISC2 */
u32 clk_rst_pllm_misc20_override_enable;
/* defines CLK_ENB_MC1 in register clk_rst_controller_clk_enb_w_clr */
u32 clear_clock2_mc1;
/* Auto-calibration of EMC pads */
/* Specifies the value for EMC_AUTO_CAL_INTERVAL */
u32 emc_auto_cal_interval;
/*
* Specifies the value for EMC_AUTO_CAL_CONFIG
* Note: Trigger bits are set by the SDRAM code.
*/
u32 emc_auto_cal_config;
/* Specifies the value for EMC_AUTO_CAL_CONFIG2 */
u32 emc_auto_cal_config2;
/* Specifies the value for EMC_AUTO_CAL_CONFIG3 */
u32 emc_auto_cal_config3;
u32 emc_auto_cal_config4;
u32 emc_auto_cal_config5;
u32 emc_auto_cal_config6;
u32 emc_auto_cal_config7;
u32 emc_auto_cal_config8;
/* Specifies the value for EMC_AUTO_CAL_VREF_SEL_0 */
u32 emc_auto_cal_vref_sel0;
u32 emc_auto_cal_vref_sel1;
/* Specifies the value for EMC_AUTO_CAL_CHANNEL */
u32 emc_auto_cal_channel;
/* Specifies the value for EMC_PMACRO_AUTOCAL_CFG_0 */
u32 emc_pmacro_auto_cal_cfg0;
u32 emc_pmacro_auto_cal_cfg1;
u32 emc_pmacro_auto_cal_cfg2;
u32 emc_pmacro_rx_term;
u32 emc_pmacro_dq_tx_drive;
u32 emc_pmacro_ca_tx_drive;
u32 emc_pmacro_cmd_tx_drive;
u32 emc_pmacro_auto_cal_common;
u32 emc_pmacro_zcrtl;
/*
* Specifies the time for the calibration
* to stabilize (in microseconds)
*/
u32 emc_auto_cal_wait;
u32 emc_xm2_comp_pad_ctrl;
u32 emc_xm2_comp_pad_ctrl2;
u32 emc_xm2_comp_pad_ctrl3;
/*
* DRAM size information
* Specifies the value for EMC_ADR_CFG
*/
u32 emc_adr_cfg;
/*
* Specifies the time to wait after asserting pin
* CKE (in microseconds)
*/
u32 emc_pin_program_wait;
/* Specifies the extra delay before/after pin RESET/CKE command */
u32 emc_pin_extra_wait;
u32 emc_pin_gpio_enable;
u32 emc_pin_gpio;
/*
* Specifies the extra delay after the first writing
* of EMC_TIMING_CONTROL
*/
u32 emc_timing_control_wait;
/* Timing parameters required for the SDRAM */
/* Specifies the value for EMC_RC */
u32 emc_rc;
/* Specifies the value for EMC_RFC */
u32 emc_rfc;
u32 emc_rfc_pb;
u32 emc_ref_ctrl2;
/* Specifies the value for EMC_RFC_SLR */
u32 emc_rfc_slr;
/* Specifies the value for EMC_RAS */
u32 emc_ras;
/* Specifies the value for EMC_RP */
u32 emc_rp;
/* Specifies the value for EMC_R2R */
u32 emc_r2r;
/* Specifies the value for EMC_W2W */
u32 emc_w2w;
/* Specifies the value for EMC_R2W */
u32 emc_r2w;
/* Specifies the value for EMC_W2R */
u32 emc_w2r;
/* Specifies the value for EMC_R2P */
u32 emc_r2p;
/* Specifies the value for EMC_W2P */
u32 emc_w2p;
/* Specifies the value for EMC_RD_RCD */
u32 emc_tppd;
u32 emc_ccdmw;
u32 emc_rd_rcd;
/* Specifies the value for EMC_WR_RCD */
u32 emc_wr_rcd;
/* Specifies the value for EMC_RRD */
u32 emc_rrd;
/* Specifies the value for EMC_REXT */
u32 emc_rext;
/* Specifies the value for EMC_WEXT */
u32 emc_wext;
/* Specifies the value for EMC_WDV */
u32 emc_wdv;
u32 emc_wdv_chk;
u32 emc_wsv;
u32 emc_wev;
/* Specifies the value for EMC_WDV_MASK */
u32 emc_wdv_mask;
u32 emc_ws_duration;
u32 emc_we_duration;
/* Specifies the value for EMC_QUSE */
u32 emc_quse;
/* Specifies the value for EMC_QUSE_WIDTH */
u32 emc_quse_width;
/* Specifies the value for EMC_IBDLY */
u32 emc_ibdly;
u32 emc_obdly;
/* Specifies the value for EMC_EINPUT */
u32 emc_einput;
/* Specifies the value for EMC_EINPUT_DURATION */
u32 emc_einput_duration;
/* Specifies the value for EMC_PUTERM_EXTRA */
u32 emc_puterm_extra;
/* Specifies the value for EMC_PUTERM_WIDTH */
u32 emc_puterm_width;
u32 emc_qrst;
u32 emc_qsafe;
u32 emc_rdv;
u32 emc_rdv_mask;
u32 emc_rdv_early;
u32 emc_rdv_early_mask;
/* Specifies the value for EMC_QPOP */
u32 emc_qpop;
/* Specifies the value for EMC_REFRESH */
u32 emc_refresh;
/* Specifies the value for EMC_BURST_REFRESH_NUM */
u32 emc_burst_refresh_num;
/* Specifies the value for EMC_PRE_REFRESH_REQ_CNT */
u32 emc_prerefresh_req_cnt;
/* Specifies the value for EMC_PDEX2WR */
u32 emc_pdex2wr;
/* Specifies the value for EMC_PDEX2RD */
u32 emc_pdex2rd;
/* Specifies the value for EMC_PCHG2PDEN */
u32 emc_pchg2pden;
/* Specifies the value for EMC_ACT2PDEN */
u32 emc_act2pden;
/* Specifies the value for EMC_AR2PDEN */
u32 emc_ar2pden;
/* Specifies the value for EMC_RW2PDEN */
u32 emc_rw2pden;
u32 emc_cke2pden;
u32 emc_pdex2che;
u32 emc_pdex2mrr;
/* Specifies the value for EMC_TXSR */
u32 emc_txsr;
/* Specifies the value for EMC_TXSRDLL */
u32 emc_txsr_dll;
/* Specifies the value for EMC_TCKE */
u32 emc_tcke;
/* Specifies the value for EMC_TCKESR */
u32 emc_tckesr;
/* Specifies the value for EMC_TPD */
u32 emc_tpd;
/* Specifies the value for EMC_TFAW */
u32 emc_tfaw;
/* Specifies the value for EMC_TRPAB */
u32 emc_trpab;
/* Specifies the value for EMC_TCLKSTABLE */
u32 emc_tclkstable;
/* Specifies the value for EMC_TCLKSTOP */
u32 emc_tclkstop;
/* Specifies the value for EMC_TREFBW */
u32 emc_trefbw;
/* FBIO configuration values */
/* Specifies the value for EMC_FBIO_CFG5 */
u32 emc_fbio_cfg5;
/* Specifies the value for EMC_FBIO_CFG7 */
u32 emc_fbio_cfg7;
u32 emc_fbio_cfg8;
/* Command mapping for CMD brick 0 */
u32 emc_cmd_mapping_cmd0_0;
u32 emc_cmd_mapping_cmd0_1;
u32 emc_cmd_mapping_cmd0_2;
u32 emc_cmd_mapping_cmd1_0;
u32 emc_cmd_mapping_cmd1_1;
u32 emc_cmd_mapping_cmd1_2;
u32 emc_cmd_mapping_cmd2_0;
u32 emc_cmd_mapping_cmd2_1;
u32 emc_cmd_mapping_cmd2_2;
u32 emc_cmd_mapping_cmd3_0;
u32 emc_cmd_mapping_cmd3_1;
u32 emc_cmd_mapping_cmd3_2;
u32 emc_cmd_mapping_byte;
/* Specifies the value for EMC_FBIO_SPARE */
u32 emc_fbio_spare;
/* Specifies the value for EMC_CFG_RSV */
u32 emc_cfg_rsv;
/* MRS command values */
/* Specifies the value for EMC_MRS */
u32 emc_mrs;
/* Specifies the MP0 command to initialize mode registers */
u32 emc_emrs;
/* Specifies the MP2 command to initialize mode registers */
u32 emc_emrs2;
/* Specifies the MP3 command to initialize mode registers */
u32 emc_emrs3;
/* Specifies the programming to LPDDR2 Mode Register 1 at cold boot */
u32 emc_mrw1;
/* Specifies the programming to LPDDR2 Mode Register 2 at cold boot */
u32 emc_mrw2;
/* Specifies the programming to LPDDR2 Mode Register 3 at cold boot */
u32 emc_mrw3;
/* Specifies the programming to LPDDR2 Mode Register 11 at cold boot */
u32 emc_mrw4;
/* Specifies the programming to LPDDR4 Mode Register 3 at cold boot */
u32 emc_mrw6;
/* Specifies the programming to LPDDR4 Mode Register 11 at cold boot */
u32 emc_mrw8;
/* Specifies the programming to LPDDR4 Mode Register 11 at cold boot */
u32 emc_mrw9;
/* Specifies the programming to LPDDR4 Mode Register 12 at cold boot */
u32 emc_mrw10;
/* Specifies the programming to LPDDR4 Mode Register 14 at cold boot */
u32 emc_mrw12;
/* Specifies the programming to LPDDR4 Mode Register 14 at cold boot */
u32 emc_mrw13;
/* Specifies the programming to LPDDR4 Mode Register 22 at cold boot */
u32 emc_mrw14;
/*
* Specifies the programming to extra LPDDR2 Mode Register
* at cold boot
*/
u32 emc_mrw_extra;
/*
* Specifies the programming to extra LPDDR2 Mode Register
* at warm boot
*/
u32 emc_warm_boot_mrw_extra;
/*
* Specify the enable of extra Mode Register programming at
* warm boot
*/
u32 emc_warm_boot_extramode_reg_write_enable;
/*
* Specify the enable of extra Mode Register programming at
* cold boot
*/
u32 emc_extramode_reg_write_enable;
/* Specifies the EMC_MRW reset command value */
u32 emc_mrw_reset_command;
/* Specifies the EMC Reset wait time (in microseconds) */
u32 emc_mrw_reset_ninit_wait;
/* Specifies the value for EMC_MRS_WAIT_CNT */
u32 emc_mrs_wait_cnt;
/* Specifies the value for EMC_MRS_WAIT_CNT2 */
u32 emc_mrs_wait_cnt2;
/* EMC miscellaneous configurations */
/* Specifies the value for EMC_CFG */
u32 emc_cfg;
/* Specifies the value for EMC_CFG_2 */
u32 emc_cfg2;
/* Specifies the pipe bypass controls */
u32 emc_cfg_pipe;
u32 emc_cfg_pipe_clk;
u32 emc_fdpd_ctrl_cmd_no_ramp;
u32 emc_cfg_update;
/* Specifies the value for EMC_DBG */
u32 emc_dbg;
u32 emc_dbg_write_mux;
/* Specifies the value for EMC_CMDQ */
u32 emc_cmd_q;
/* Specifies the value for EMC_MC2EMCQ */
u32 emc_mc2emc_q;
/* Specifies the value for EMC_DYN_SELF_REF_CONTROL */
u32 emc_dyn_self_ref_control;
/* Specifies the value for MEM_INIT_DONE */
u32 ahb_arbitration_xbar_ctrl_meminit_done;
/* Specifies the value for EMC_CFG_DIG_DLL */
u32 emc_cfg_dig_dll;
u32 emc_cfg_dig_dll_1;
/* Specifies the value for EMC_CFG_DIG_DLL_PERIOD */
u32 emc_cfg_dig_dll_period;
/* Specifies the value of *DEV_SELECTN of various EMC registers */
u32 emc_dev_select;
/* Specifies the value for EMC_SEL_DPD_CTRL */
u32 emc_sel_dpd_ctrl;
/* Pads trimmer delays */
u32 emc_fdpd_ctrl_dq;
u32 emc_fdpd_ctrl_cmd;
u32 emc_pmacro_ib_vref_dq_0;
u32 emc_pmacro_ib_vref_dq_1;
u32 emc_pmacro_ib_vref_dqs_0;
u32 emc_pmacro_ib_vref_dqs_1;
u32 emc_pmacro_ib_rxrt;
u32 emc_cfg_pipe1;
u32 emc_cfg_pipe2;
/* Specifies the value for EMC_PMACRO_QUSE_DDLL_RANK0_0 */
u32 emc_pmacro_quse_ddll_rank0_0;
u32 emc_pmacro_quse_ddll_rank0_1;
u32 emc_pmacro_quse_ddll_rank0_2;
u32 emc_pmacro_quse_ddll_rank0_3;
u32 emc_pmacro_quse_ddll_rank0_4;
u32 emc_pmacro_quse_ddll_rank0_5;
u32 emc_pmacro_quse_ddll_rank1_0;
u32 emc_pmacro_quse_ddll_rank1_1;
u32 emc_pmacro_quse_ddll_rank1_2;
u32 emc_pmacro_quse_ddll_rank1_3;
u32 emc_pmacro_quse_ddll_rank1_4;
u32 emc_pmacro_quse_ddll_rank1_5;
u32 emc_pmacro_ob_ddll_long_dq_rank0_0;
u32 emc_pmacro_ob_ddll_long_dq_rank0_1;
u32 emc_pmacro_ob_ddll_long_dq_rank0_2;
u32 emc_pmacro_ob_ddll_long_dq_rank0_3;
u32 emc_pmacro_ob_ddll_long_dq_rank0_4;
u32 emc_pmacro_ob_ddll_long_dq_rank0_5;
u32 emc_pmacro_ob_ddll_long_dq_rank1_0;
u32 emc_pmacro_ob_ddll_long_dq_rank1_1;
u32 emc_pmacro_ob_ddll_long_dq_rank1_2;
u32 emc_pmacro_ob_ddll_long_dq_rank1_3;
u32 emc_pmacro_ob_ddll_long_dq_rank1_4;
u32 emc_pmacro_ob_ddll_long_dq_rank1_5;
u32 emc_pmacro_ob_ddll_long_dqs_rank0_0;
u32 emc_pmacro_ob_ddll_long_dqs_rank0_1;
u32 emc_pmacro_ob_ddll_long_dqs_rank0_2;
u32 emc_pmacro_ob_ddll_long_dqs_rank0_3;
u32 emc_pmacro_ob_ddll_long_dqs_rank0_4;
u32 emc_pmacro_ob_ddll_long_dqs_rank0_5;
u32 emc_pmacro_ob_ddll_long_dqs_rank1_0;
u32 emc_pmacro_ob_ddll_long_dqs_rank1_1;
u32 emc_pmacro_ob_ddll_long_dqs_rank1_2;
u32 emc_pmacro_ob_ddll_long_dqs_rank1_3;
u32 emc_pmacro_ob_ddll_long_dqs_rank1_4;
u32 emc_pmacro_ob_ddll_long_dqs_rank1_5;
u32 emc_pmacro_ib_ddll_long_dqs_rank0_0;
u32 emc_pmacro_ib_ddll_long_dqs_rank0_1;
u32 emc_pmacro_ib_ddll_long_dqs_rank0_2;
u32 emc_pmacro_ib_ddll_long_dqs_rank0_3;
u32 emc_pmacro_ib_ddll_long_dqs_rank1_0;
u32 emc_pmacro_ib_ddll_long_dqs_rank1_1;
u32 emc_pmacro_ib_ddll_long_dqs_rank1_2;
u32 emc_pmacro_ib_ddll_long_dqs_rank1_3;
u32 emc_pmacro_ddll_long_cmd_0;
u32 emc_pmacro_ddll_long_cmd_1;
u32 emc_pmacro_ddll_long_cmd_2;
u32 emc_pmacro_ddll_long_cmd_3;
u32 emc_pmacro_ddll_long_cmd_4;
u32 emc_pmacro_ddll_short_cmd_0;
u32 emc_pmacro_ddll_short_cmd_1;
u32 emc_pmacro_ddll_short_cmd_2;
/*
* Specifies the delay after asserting CKE pin during a WarmBoot0
* sequence (in microseconds)
*/
u32 warm_boot_wait;
/* Specifies the value for EMC_ODT_WRITE */
u32 emc_odt_write;
/* Periodic ZQ calibration */
/*
* Specifies the value for EMC_ZCAL_INTERVAL
* Value 0 disables ZQ calibration
*/
u32 emc_zcal_interval;
/* Specifies the value for EMC_ZCAL_WAIT_CNT */
u32 emc_zcal_wait_cnt;
/* Specifies the value for EMC_ZCAL_MRW_CMD */
u32 emc_zcal_mrw_cmd;
/* DRAM initialization sequence flow control */
/* Specifies the MRS command value for resetting DLL */
u32 emc_mrs_reset_dll;
/* Specifies the command for ZQ initialization of device 0 */
u32 emc_zcal_init_dev0;
/* Specifies the command for ZQ initialization of device 1 */
u32 emc_zcal_init_dev1;
/*
* Specifies the wait time after programming a ZQ initialization
* command (in microseconds)
*/
u32 emc_zcal_init_wait;
/*
* Specifies the enable for ZQ calibration at cold boot [bit 0]
* and warm boot [bit 1]
*/
u32 emc_zcal_warm_cold_boot_enables;
/*
* Specifies the MRW command to LPDDR2 for ZQ calibration
* on warmboot
*/
/* Is issued to both devices separately */
u32 emc_mrw_lpddr2zcal_warm_boot;
/*
* Specifies the ZQ command to DDR3 for ZQ calibration on warmboot
* Is issued to both devices separately
*/
u32 emc_zqcal_ddr3_warm_boot;
u32 emc_zqcal_lpddr4_warm_boot;
/*
* Specifies the wait time for ZQ calibration on warmboot
* (in microseconds)
*/
u32 emc_zcal_warm_boot_wait;
/*
* Specifies the enable for DRAM Mode Register programming
* at warm boot
*/
u32 emc_mrs_warm_boot_enable;
/*
* Specifies the wait time after sending an MRS DLL reset command
* in microseconds)
*/
u32 emc_mrs_reset_dll_wait;
/* Specifies the extra MRS command to initialize mode registers */
u32 emc_mrs_extra;
/* Specifies the extra MRS command at warm boot */
u32 emc_warm_boot_mrs_extra;
/* Specifies the EMRS command to enable the DDR2 DLL */
u32 emc_emrs_ddr2_dll_enable;
/* Specifies the MRS command to reset the DDR2 DLL */
u32 emc_mrs_ddr2_dll_reset;
/* Specifies the EMRS command to set OCD calibration */
u32 emc_emrs_ddr2_ocd_calib;
/*
* Specifies the wait between initializing DDR and setting OCD
* calibration (in microseconds)
*/
u32 emc_ddr2_wait;
/* Specifies the value for EMC_CLKEN_OVERRIDE */
u32 emc_clken_override;
/*
* Specifies LOG2 of the extra refresh numbers after booting
* Program 0 to disable
*/
u32 emc_extra_refresh_num;
/* Specifies the master override for all EMC clocks */
u32 emc_clken_override_allwarm_boot;
/* Specifies the master override for all MC clocks */
u32 mc_clken_override_allwarm_boot;
/* Specifies digital dll period, choosing between 4 to 64 ms */
u32 emc_cfg_dig_dll_period_warm_boot;
/* Pad controls */
/* Specifies the value for PMC_VDDP_SEL */
u32 pmc_vddp_sel;
/* Specifies the wait time after programming PMC_VDDP_SEL */
u32 pmc_vddp_sel_wait;
/* Specifies the value for PMC_DDR_PWR */
u32 pmc_ddr_pwr;
/* Specifies the value for PMC_DDR_CFG */
u32 pmc_ddr_cfg;
/* Specifies the value for PMC_IO_DPD3_REQ */
u32 pmc_io_dpd3_req;
/* Specifies the wait time after programming PMC_IO_DPD3_REQ */
u32 pmc_io_dpd3_req_wait;
u32 pmc_io_dpd4_req_wait;
/* Specifies the value for PMC_REG_SHORT */
u32 pmc_reg_short;
/* Specifies the value for PMC_NO_IOPOWER */
u32 pmc_no_io_power;
u32 pmc_ddr_ctrl_wait;
u32 pmc_ddr_ctrl;
/* Specifies the value for EMC_ACPD_CONTROL */
u32 emc_acpd_control;
/* Specifies the value for EMC_SWIZZLE_RANK0_BYTE0 */
u32 emc_swizzle_rank0_byte0;
/* Specifies the value for EMC_SWIZZLE_RANK0_BYTE1 */
u32 emc_swizzle_rank0_byte1;
/* Specifies the value for EMC_SWIZZLE_RANK0_BYTE2 */
u32 emc_swizzle_rank0_byte2;
/* Specifies the value for EMC_SWIZZLE_RANK0_BYTE3 */
u32 emc_swizzle_rank0_byte3;
/* Specifies the value for EMC_SWIZZLE_RANK1_BYTE0 */
u32 emc_swizzle_rank1_byte0;
/* Specifies the value for EMC_SWIZZLE_RANK1_BYTE1 */
u32 emc_swizzle_rank1_byte1;
/* Specifies the value for EMC_SWIZZLE_RANK1_BYTE2 */
u32 emc_swizzle_rank1_byte2;
/* Specifies the value for EMC_SWIZZLE_RANK1_BYTE3 */
u32 emc_swizzle_rank1_byte3;
/* Specifies the value for EMC_TXDSRVTTGEN */
u32 emc_txdsrvttgen;
/* Specifies the value for EMC_DATA_BRLSHFT_0 */
u32 emc_data_brlshft0;
u32 emc_data_brlshft1;
u32 emc_dqs_brlshft0;
u32 emc_dqs_brlshft1;
u32 emc_cmd_brlshft0;
u32 emc_cmd_brlshft1;
u32 emc_cmd_brlshft2;
u32 emc_cmd_brlshft3;
u32 emc_quse_brlshft0;
u32 emc_quse_brlshft1;
u32 emc_quse_brlshft2;
u32 emc_quse_brlshft3;
u32 emc_dll_cfg0;
u32 emc_dll_cfg1;
u32 emc_pmc_scratch1;
u32 emc_pmc_scratch2;
u32 emc_pmc_scratch3;
u32 emc_pmacro_pad_cfg_ctrl;
u32 emc_pmacro_vttgen_ctrl0;
u32 emc_pmacro_vttgen_ctrl1;
u32 emc_pmacro_vttgen_ctrl2;
u32 emc_pmacro_brick_ctrl_rfu1;
u32 emc_pmacro_cmd_brick_ctrl_fdpd;
u32 emc_pmacro_brick_ctrl_rfu2;
u32 emc_pmacro_data_brick_ctrl_fdpd;
u32 emc_pmacro_bg_bias_ctrl0;
u32 emc_pmacro_data_pad_rx_ctrl;
u32 emc_pmacro_cmd_pad_rx_ctrl;
u32 emc_pmacro_data_rx_term_mode;
u32 emc_pmacro_cmd_rx_term_mode;
u32 emc_pmacro_data_pad_tx_ctrl;
u32 emc_pmacro_common_pad_tx_ctrl;
u32 emc_pmacro_cmd_pad_tx_ctrl;
u32 emc_cfg3;
u32 emc_pmacro_tx_pwrd0;
u32 emc_pmacro_tx_pwrd1;
u32 emc_pmacro_tx_pwrd2;
u32 emc_pmacro_tx_pwrd3;
u32 emc_pmacro_tx_pwrd4;
u32 emc_pmacro_tx_pwrd5;
u32 emc_config_sample_delay;
u32 emc_pmacro_brick_mapping0;
u32 emc_pmacro_brick_mapping1;
u32 emc_pmacro_brick_mapping2;
u32 emc_pmacro_tx_sel_clk_src0;
u32 emc_pmacro_tx_sel_clk_src1;
u32 emc_pmacro_tx_sel_clk_src2;
u32 emc_pmacro_tx_sel_clk_src3;
u32 emc_pmacro_tx_sel_clk_src4;
u32 emc_pmacro_tx_sel_clk_src5;
u32 emc_pmacro_ddll_bypass;
u32 emc_pmacro_ddll_pwrd0;
u32 emc_pmacro_ddll_pwrd1;
u32 emc_pmacro_ddll_pwrd2;
u32 emc_pmacro_cmd_ctrl0;
u32 emc_pmacro_cmd_ctrl1;
u32 emc_pmacro_cmd_ctrl2;
/* DRAM size information */
/* Specifies the value for MC_EMEM_ADR_CFG */
u32 mc_emem_adr_cfg;
/* Specifies the value for MC_EMEM_ADR_CFG_DEV0 */
u32 mc_emem_adr_cfg_dev0;
/* Specifies the value for MC_EMEM_ADR_CFG_DEV1 */
u32 mc_emem_adr_cfg_dev1;
u32 mc_emem_adr_cfg_channel_mask;
/* Specifies the value for MC_EMEM_BANK_SWIZZLE_CFG0 */
u32 mc_emem_adr_cfg_bank_mask0;
/* Specifies the value for MC_EMEM_BANK_SWIZZLE_CFG1 */
u32 mc_emem_adr_cfg_bank_mask1;
/* Specifies the value for MC_EMEM_BANK_SWIZZLE_CFG2 */
u32 mc_emem_adr_cfg_bank_mask2;
/*
* Specifies the value for MC_EMEM_CFG which holds the external memory
* size (in KBytes)
*/
u32 mc_emem_cfg;
/* MC arbitration configuration */
/* Specifies the value for MC_EMEM_ARB_CFG */
u32 mc_emem_arb_cfg;
/* Specifies the value for MC_EMEM_ARB_OUTSTANDING_REQ */
u32 mc_emem_arb_outstanding_req;
u32 emc_emem_arb_refpb_hp_ctrl;
u32 emc_emem_arb_refpb_bank_ctrl;
/* Specifies the value for MC_EMEM_ARB_TIMING_RCD */
u32 mc_emem_arb_timing_rcd;
/* Specifies the value for MC_EMEM_ARB_TIMING_RP */
u32 mc_emem_arb_timing_rp;
/* Specifies the value for MC_EMEM_ARB_TIMING_RC */
u32 mc_emem_arb_timing_rc;
/* Specifies the value for MC_EMEM_ARB_TIMING_RAS */
u32 mc_emem_arb_timing_ras;
/* Specifies the value for MC_EMEM_ARB_TIMING_FAW */
u32 mc_emem_arb_timing_faw;
/* Specifies the value for MC_EMEM_ARB_TIMING_RRD */
u32 mc_emem_arb_timing_rrd;
/* Specifies the value for MC_EMEM_ARB_TIMING_RAP2PRE */
u32 mc_emem_arb_timing_rap2pre;
/* Specifies the value for MC_EMEM_ARB_TIMING_WAP2PRE */
u32 mc_emem_arb_timing_wap2pre;
/* Specifies the value for MC_EMEM_ARB_TIMING_R2R */
u32 mc_emem_arb_timing_r2r;
/* Specifies the value for MC_EMEM_ARB_TIMING_W2W */
u32 mc_emem_arb_timing_w2w;
/* Specifies the value for MC_EMEM_ARB_TIMING_R2W */
u32 mc_emem_arb_timing_r2w;
/* Specifies the value for MC_EMEM_ARB_TIMING_W2R */
u32 mc_emem_arb_timing_w2r;
u32 mc_emem_arb_timing_rfcpb;
/* Specifies the value for MC_EMEM_ARB_DA_TURNS */
u32 mc_emem_arb_da_turns;
/* Specifies the value for MC_EMEM_ARB_DA_COVERS */
u32 mc_emem_arb_da_covers;
/* Specifies the value for MC_EMEM_ARB_MISC0 */
u32 mc_emem_arb_misc0;
/* Specifies the value for MC_EMEM_ARB_MISC1 */
u32 mc_emem_arb_misc1;
u32 mc_emem_arb_misc2;
/* Specifies the value for MC_EMEM_ARB_RING1_THROTTLE */
u32 mc_emem_arb_ring1_throttle;
/* Specifies the value for MC_EMEM_ARB_OVERRIDE */
u32 mc_emem_arb_override;
/* Specifies the value for MC_EMEM_ARB_OVERRIDE_1 */
u32 mc_emem_arb_override1;
/* Specifies the value for MC_EMEM_ARB_RSV */
u32 mc_emem_arb_rsv;
u32 mc_da_cfg0;
u32 mc_emem_arb_timing_ccdmw;
/* Specifies the value for MC_CLKEN_OVERRIDE */
u32 mc_clken_override;
/* Specifies the value for MC_STAT_CONTROL */
u32 mc_stat_control;
/* Specifies the value for MC_VIDEO_PROTECT_BOM */
u32 mc_video_protect_bom;
/* Specifies the value for MC_VIDEO_PROTECT_BOM_ADR_HI */
u32 mc_video_protect_bom_adr_hi;
/* Specifies the value for MC_VIDEO_PROTECT_SIZE_MB */
u32 mc_video_protect_size_mb;
/* Specifies the value for MC_VIDEO_PROTECT_VPR_OVERRIDE */
u32 mc_video_protect_vpr_override;
/* Specifies the value for MC_VIDEO_PROTECT_VPR_OVERRIDE1 */
u32 mc_video_protect_vpr_override1;
/* Specifies the value for MC_VIDEO_PROTECT_GPU_OVERRIDE_0 */
u32 mc_video_protect_gpu_override0;
/* Specifies the value for MC_VIDEO_PROTECT_GPU_OVERRIDE_1 */
u32 mc_video_protect_gpu_override1;
/* Specifies the value for MC_SEC_CARVEOUT_BOM */
u32 mc_sec_carveout_bom;
/* Specifies the value for MC_SEC_CARVEOUT_ADR_HI */
u32 mc_sec_carveout_adr_hi;
/* Specifies the value for MC_SEC_CARVEOUT_SIZE_MB */
u32 mc_sec_carveout_size_mb;
/* Specifies the value for MC_VIDEO_PROTECT_REG_CTRL.VIDEO_PROTECT_WRITE_ACCESS */
u32 mc_video_protect_write_access;
/* Specifies the value for MC_SEC_CARVEOUT_REG_CTRL.SEC_CARVEOUT_WRITE_ACCESS */
u32 mc_sec_carveout_protect_write_access;
u32 mc_generalized_carveout1_bom;
u32 mc_generalized_carveout1_bom_hi;
u32 mc_generalized_carveout1_size_128kb;
u32 mc_generalized_carveout1_access0;
u32 mc_generalized_carveout1_access1;
u32 mc_generalized_carveout1_access2;
u32 mc_generalized_carveout1_access3;
u32 mc_generalized_carveout1_access4;
u32 mc_generalized_carveout1_force_internal_access0;
u32 mc_generalized_carveout1_force_internal_access1;
u32 mc_generalized_carveout1_force_internal_access2;
u32 mc_generalized_carveout1_force_internal_access3;
u32 mc_generalized_carveout1_force_internal_access4;
u32 mc_generalized_carveout1_cfg0;
u32 mc_generalized_carveout2_bom;
u32 mc_generalized_carveout2_bom_hi;
u32 mc_generalized_carveout2_size_128kb;
u32 mc_generalized_carveout2_access0;
u32 mc_generalized_carveout2_access1;
u32 mc_generalized_carveout2_access2;
u32 mc_generalized_carveout2_access3;
u32 mc_generalized_carveout2_access4;
u32 mc_generalized_carveout2_force_internal_access0;
u32 mc_generalized_carveout2_force_internal_access1;
u32 mc_generalized_carveout2_force_internal_access2;
u32 mc_generalized_carveout2_force_internal_access3;
u32 mc_generalized_carveout2_force_internal_access4;
u32 mc_generalized_carveout2_cfg0;
u32 mc_generalized_carveout3_bom;
u32 mc_generalized_carveout3_bom_hi;
u32 mc_generalized_carveout3_size_128kb;
u32 mc_generalized_carveout3_access0;
u32 mc_generalized_carveout3_access1;
u32 mc_generalized_carveout3_access2;
u32 mc_generalized_carveout3_access3;
u32 mc_generalized_carveout3_access4;
u32 mc_generalized_carveout3_force_internal_access0;
u32 mc_generalized_carveout3_force_internal_access1;
u32 mc_generalized_carveout3_force_internal_access2;
u32 mc_generalized_carveout3_force_internal_access3;
u32 mc_generalized_carveout3_force_internal_access4;
u32 mc_generalized_carveout3_cfg0;
u32 mc_generalized_carveout4_bom;
u32 mc_generalized_carveout4_bom_hi;
u32 mc_generalized_carveout4_size_128kb;
u32 mc_generalized_carveout4_access0;
u32 mc_generalized_carveout4_access1;
u32 mc_generalized_carveout4_access2;
u32 mc_generalized_carveout4_access3;
u32 mc_generalized_carveout4_access4;
u32 mc_generalized_carveout4_force_internal_access0;
u32 mc_generalized_carveout4_force_internal_access1;
u32 mc_generalized_carveout4_force_internal_access2;
u32 mc_generalized_carveout4_force_internal_access3;
u32 mc_generalized_carveout4_force_internal_access4;
u32 mc_generalized_carveout4_cfg0;
u32 mc_generalized_carveout5_bom;
u32 mc_generalized_carveout5_bom_hi;
u32 mc_generalized_carveout5_size_128kb;
u32 mc_generalized_carveout5_access0;
u32 mc_generalized_carveout5_access1;
u32 mc_generalized_carveout5_access2;
u32 mc_generalized_carveout5_access3;
u32 mc_generalized_carveout5_access4;
u32 mc_generalized_carveout5_force_internal_access0;
u32 mc_generalized_carveout5_force_internal_access1;
u32 mc_generalized_carveout5_force_internal_access2;
u32 mc_generalized_carveout5_force_internal_access3;
u32 mc_generalized_carveout5_force_internal_access4;
u32 mc_generalized_carveout5_cfg0;
/* Specifies enable for CA training */
u32 emc_ca_training_enable;
/* Set if bit 6 select is greater than bit 7 select; uses aremc.spec packet SWIZZLE_BIT6_GT_BIT7 */
u32 swizzle_rank_byte_encode;
/* Specifies enable and offset for patched boot rom write */
u32 boot_rom_patch_control;
/* Specifies data for patched boot rom write */
u32 boot_rom_patch_data;
/* Specifies the value for MC_MTS_CARVEOUT_BOM */
u32 mc_mts_carveout_bom;
/* Specifies the value for MC_MTS_CARVEOUT_ADR_HI */
u32 mc_mts_carveout_adr_hi;
/* Specifies the value for MC_MTS_CARVEOUT_SIZE_MB */
u32 mc_mts_carveout_size_mb;
/* Specifies the value for MC_MTS_CARVEOUT_REG_CTRL */
u32 mc_mts_carveout_reg_ctrl;
} sdram_params_t;
#endif
Reference in a new issue View git blame Copy permalink