* Start refactoring kernel a bit and import some changes from kernel decoupling PR
* kernel: Put output always at the start in Syscall functions
* kernel: Rewrite GetThreadContext3 to use a structure and to be accurate
* kernel: make KernelTransfer use generic types and simplify
* Fix some warning and do not use getters on MemoryInfo
* Address gdkchan's comment
* GetThreadContext3: use correct pause flag
* Add timestamp to 16-byte semaphore releases.
BOTW was reading a ulong 8 bytes after a semaphore return. Turns out this is the timestamp it was trying to do performance calculation with, so I've made it write when necessary.
This mode was also added to the DMA semaphore I added recently, as it is required by a few games. (i think quake?)
The timestamp code has been moved to GPU context. Check other games with an unusually low framerate cap or dynamic resolution to see if they have improved.
* Cast dma semaphore payload to ulong to fill the space
* Write timestamp first
Might be just worrying too much, but we don't want the applcation reading timestamp if it sees the payload before timestamp is written.
This fixes an issue where the render scale array would not be updated when technically the scales on the flat array were the same, but the start index for the vertex scales was different.
* Add support for BC1/2/3 decompression (for 3D textures)
* Optimize and clean up
* Unsafe not needed here
* Fix alpha value interpolation when a0 <= a1
As AppVeyor took our project down and deleted it without any comments, we are switching to GitHub Releases earlier than anticipated.
This isn't the most elegant design (and I would have prefered having a release manifest in place) but this will do for now.
The concept of release channel was also defined with this change.
The new base version is now 1.1.x to avoid confusion with older system.
Standard test CI was disabled temporarly and may be chained later as a CI job after the release job.
Users are expected to redownload the emulator to be sure to be up to date.
PS: If someone from AppVeyor read this, thanks again for ruining my week-end, I will be sure to NEVER recommend you to anyone.
Best Regards, Mary.
This fixes a rare bug where reporting a counter for a region containing 0 draws could deadlock the GPU. If this write overlaps with a tracking action, then the GPU could end up waiting on something that it's meant to do in the future, so it would just get stuck.
Before, this reported immediately and wrote the result to guest memory (tracked) from the backend thread.
The backend thread cannot be allowed to trigger read actions that wait on the GPU, as it will end up waiting on itself, and never advancing.
In the case of backend multithreading's `SyncMap`, it would try to wait for a backend sync object that does not yet exist, as the sync object would exist according to the GPU and tracking, but it has not yet been created by the backend (and never will be, since it's stuck).
The fix is to queue the 0 draw event just like any other, its _bufferMap value is just forced to 0.
This affects games that use Conditional Rendering: SMO, Splatoon 2, MK8. Was generally indicated by a red message in log saying that the query result timed out after 5000 tries, but not always the cause.
* Stop using glTransformFeedbackVarying and use explicit layout on the shader
* This is no longer needed
* Shader cache version bump
* Fix gl_PerVertex output for tessellation control shaders
* kernel: Fix deadlock when pinning in interrupt handler
This fix a deadlock on DoDonPachi Resurrection when starting a new game
* Address gdkchan's comment
* implement certain servicessl functions
* ssl: Implement more of SSL connection and abstract it
This adds support to non blocking SSL operations and unlink the SSL
implementation from the IPC logic.
* Rename SslDefaultSocketConnection to SslManagedSocketConnection
* Fix regression on Pokemon TV
* Address gdkchan's comment
* Simplify value read from previous commit
* ssl: some changes
- Implement builtin certificates parsing and retrieving
- Fix issues with SSL version handling
- Improve managed SSL socket error handling
- Ensure to only return a certificate on DoHandshake when actually requested
* Add missing BuiltInCertificateManager initialization call
* Address gdkchan's comment
* Address Ack's comment
Co-authored-by: InvoxiPlayGames <webmaster@invoxiplaygames.uk>
* bsd: Revamp API and make socket abstract
This part of the code was really ancient and needed some love.
As such this commit aims at separating the socket core logic from the IClient class and make it uses more modern APIs to read/write/parse data.
* Address gdkchan's comment
* Move TryConvertSocketOption to WinSockHelper
* Allow reusing old fds and add missing locks around SocketInternal and ShutdownAllSockets
* bsd: ton of changes
- Make sockets per process
- Implement eventfds
- Rework Poll for support of eventfds
- Handle protocol auto selection by type (used by gRPC)
- Handle IPv6 socket creation
* Address most of gdkchan comments
* Fix inverted read logic for BSD socket read
* bsd: Make Poll abstract via IBsdSocketPollManager
* bsd: Improve naming of everything
* Fix build issue from last commit (missed to save on VC)
* Switch BsdContext registry to a concurrent dictionary
* bsd: Implement socket creation flags logic and the non blocking flag
* Remove unused enum from previous commit
* bsd: Fix poll logic when 0 fds are present for a given poll manager and when timeout is very small (or 0)
* Address gdkchan's comment
This fixes some regressions caused by #2971 which caused rendered 3D texture data to be lost for most slices. Fixes issues with Xenoblade 2's colour grading, probably a ton of other games.
This also removes the check from TextureCache, making it the tiniest bit smaller (any win is a win here).
* Implement IMUL shader instruction
* Implement PCNT/CONT instruction and fix FFMA32I
* Add HFMA232I to the table
* Shader cache version bump
* No Rc on Ffma32i
* Initial test for texture sync
* WIP new texture flushing setup
* Improve rules for incompatible overlaps
Fixes a lot of issues with Unreal Engine games. Still a few minor issues (some caused by dma fast path?) Needs docs and cleanup.
* Cleanup, improvements
Improve rules for fast DMA
* Small tweak to group together flushes of overlapping handles.
* Fixes, flush overlapping texture data for ASTC and BC4/5 compressed textures.
Fixes the new Life is Strange game.
* Flush overlaps before init data, fix 3d texture size/overlap stuff
* Fix 3D Textures, faster single layer flush
Note: nosy people can no longer merge this with Vulkan. (unless they are nosy enough to implement the new backend methods)
* Remove unused method
* Minor cleanup
* More cleanup
* Use the More Fun and Hopefully No Driver Bugs method for getting compressed tex too
This one's for metro
* Address feedback, ASTC+ETC to FormatClass
* Change offset to use Span slice rather than IntPtr Add
* Fix this too
* Add support for render scale to vertex stage.
Occasionally games read off textureSize on the vertex stage to inform the fragment shader what size a texture is without querying in there. Scales were not present in the vertex shader to correct the sizes, so games were providing the raw upscaled texture size to the fragment shader, which was incorrect.
One downside is that the fragment and vertex support buffer description must be identical, so the full size scales array must be defined when used. I don't think this will have an impact though. Another is that the fragment texture count must be updated when vertex shader textures are used. I'd like to correct this so that the update is folded into the update for the scales.
Also cleans up a bunch of things, like it making no sense to call CommitRenderScale for each stage.
Fixes render scale causing a weird offset bloom in Super Mario Party and Clubhouse Games. Clubhouse Games still has a pixelated look in a number of its games due to something else it does in the shader.
* Split out support buffer update, lazy updates.
* Commit support buffer before compute dispatch
* Remove unnecessary qualifier.
* Address Feedback
* ffmpeg: Add extra checks and error messages
This PR adds some checks and logging error messages related to the ffmpeg context creation, that will prevent users to open issues because they don't have the correct packages installed.
Close#2762
* Update FFmpegContext.cs
* friend: Stub IsFriendListCacheAvailable and EnsureFriendListAvailable
This PR stubs IsFriendListCacheAvailable and EnsureFriendListAvailable call of friend service which close#2896.
Sadly, Super Bomberman R Online is still stuck on the loading screen and keep calling `TryPopFromFriendInvitationStorageChannel`, probably because another issue somewhere.
* Add FW version
* Apply suggestions from gdkchan
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
* Update IFriendService.cs
Co-authored-by: gdkchan <gab.dark.100@gmail.com>
This PR stub `SetMediaPlaybackStateForApplication` of the am service. Accordingly to gdkchan it's needed by the Youtube app. This is checked by RE aswell.
* kernel: Implement Thread pinning support
This commit adds support for 8.x thread pinning changes and implement SynchronizePreemptionState syscall.
Based on kernel 13.x reverse.
* Address gdkchan's comment
* kernel: fix missing critical section leave in SetActivity
Fix Unity games
* Implement missing bits on the interrupt handler and inline update pinning function as it cannot be generic
* Fix some bugs in SetActivity and SetCoreAndAffinityMask
* Address gdkchan's comments
While I'm looking to the code, I've found some syntax issue, and a little inconsistencie between `ActivateNpad` and `ActivateNpadWithRevision`. Nothing more.
