mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-12-22 16:12:03 +00:00
Code Issues Releases Activity

bdk: hwinit: display changes

Browse source 
Do not display ldo0 if enabled here as it's not needed.
Make sure PLLP_OUTB is properly reset in case of coming out of warmboot.
This commit is contained in:
CTCaer 2024-07-02 17:59:14 +03:00
parent acb3997a7d
commit e47b6ec19b
3 changed files with 7 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
bdk/soc/clock.h
View file

@ -47,6 +47,7 @@
#define CLK_RST_CONTROLLER_PLLM_MISC1 0x98
#define CLK_RST_CONTROLLER_PLLM_MISC2 0x9C
#define CLK_RST_CONTROLLER_PLLP_BASE 0xA0
#define CLK_RST_CONTROLLER_PLLP_OUTB 0xA8
#define CLK_RST_CONTROLLER_PLLA_BASE 0xB0
#define CLK_RST_CONTROLLER_PLLA_OUT 0xB4
#define CLK_RST_CONTROLLER_PLLA_MISC1 0xB8

6
bdk/soc/hw_init.c
View file

@ -305,9 +305,6 @@ static void _config_regulators(bool tegra_t210, bool nx_hoag)
(void)PMC(APBDEV_PMC_NO_IOPOWER);
sd_power_cycle_time_start = get_tmr_ms();
// Disable DSI AVDD to make sure it's in a reset state.
max7762x_regulator_enable(REGULATOR_LDO0, false);
// Disable backup battery charger.
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CNFGBBC, MAX77620_CNFGBBC_RESISTOR_1K);
@ -380,6 +377,9 @@ void hw_init()
if (tegra_t210)
_mbist_workaround();
// Make sure PLLP_OUT3/4 is set to 408 MHz and enabled.
CLOCK(CLK_RST_CONTROLLER_PLLP_OUTB) = 0x30003;
// Enable Security Engine clock.
clock_enable_se();

4
bdk/soc/pmc.h
View file

@ -101,7 +101,9 @@
#define PMC_RST_STATUS_LP0 4
#define PMC_RST_STATUS_AOTAG 5
#define APBDEV_PMC_IO_DPD_REQ 0x1B8
#define PMC_IO_DPD_REQ_DPD_OFF BIT(30)
#define PMC_IO_DPD_REQ_DPD_IDLE (0 << 30u)
#define PMC_IO_DPD_REQ_DPD_OFF (1 << 30u)
#define PMC_IO_DPD_REQ_DPD_ON (2 << 30u)
#define APBDEV_PMC_IO_DPD2_REQ 0x1C0
#define APBDEV_PMC_VDDP_SEL 0x1CC
#define APBDEV_PMC_DDR_CFG 0x1D0