mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-12-28 02:46:02 +00:00
Code Issues Releases Activity
454 commits 2 branches 75 tags 5.5 MiB
Commit graph

112 commits

Author SHA1 Message Date
CTCaer
52874f9113 minerva: More protections 2020-03-21 22:10:06 +02:00
CTCaer
91a241dafa touch: Add Tuning Calibration 
This, for now, can be done at Nyx boot by holding VOL- and VOL+.

Make sure that you don't touch the touchscreen.
 2020-03-21 22:03:51 +02:00
CTCaer
76676f3a2e nyx: Allow for big filepaths for archive bit fixer 
It also fixes corruptions/hangs when path is bigger than 255 chars
 2020-03-18 06:30:11 +02:00
CTCaer
f5040f1e41 Update and add missing copyrights 
Probably more need to change.
 2020-03-14 09:24:24 +02:00
CTCaer
c9c3c8f716 touch: Add context based ready checks on init 2020-03-13 17:36:44 +02:00
CTCaer
144d6fd3f6 i2c: Update drivers 
Adds support for 8 byte transfers needed by touch driver changes.
 2020-03-13 10:25:27 +02:00
CTCaer
9697067466 touch: Add fw info 2020-03-13 08:48:20 +02:00
CTCaer
8539095bdb touch: Proper init 
This patch applies the simpler init from HOS driver.

The most important change is enabling a feature that the fw supports:
Automatic tuning and calibration based on saved tuning values (running HOS only once saves these).
 2020-03-13 08:39:38 +02:00
CTCaer
95e3159fe9 touch: Correct pressure calculation 
Fingertip S for Nintendo Switch uses a custom spatial calculation. It now allows to identify area of touch.
 2020-03-13 08:34:16 +02:00
CTCaer
8d5c52f087 lvgl heap: Fix critical issue with node header size 
This fixes a critical issue where the node header was 28 bytes instead of 32, causing misalignment and heap corruption.
 2020-03-09 08:39:31 +02:00
CTCaer
e6c1d9bf66 nyx: Simplify label sets 
- Use only lv_label_set_text to simplify label sets
- Fix an issue with a label cut
- Add more maintenance functions for DRAM training
 2020-03-09 08:37:41 +02:00
CTCaer
a52af1bf41 Fix building on make 4.3 2020-03-04 01:34:35 +02:00
CTCaer
ac92ca220f fan: Better thermal logic based on HOS patterns 2020-03-03 04:37:59 +02:00
CTCaer
ab8801d0de touch: Add edge compensation 
Switch touch panels have a 10-15px offset around the edges.
(10-1269, 10-709) / (15-1264, 15-704)
This allows touch driver to report a max of 0-1279, 0-719.
 2020-03-03 04:28:12 +02:00
CTCaer
f3802ec464 lists: Fix list member iteration with no entries 2020-03-03 04:24:38 +02:00
CTCaer
bc7a7bcfa0 info: Allow dumping of battery characterization table 2020-03-03 04:22:59 +02:00
CTCaer
6a52d44da6 heap: Fix edge case of reusing first node 
There is an edge case fixed where the whole would be freed and this would make use of a nullptr.

Additionally, remove usage of reserved names for vars and add comments on how it works.
 2020-03-03 04:16:20 +02:00
CTCaer
03a8a11933 Small fixes and changes 
- Allow printing of more log on HOS boot when LOGS are OFF.
- A small name refactoring
- Add battery warning symbol when battery < 3200mV
 2020-03-03 04:11:13 +02:00
CTCaer
4c1f67d022 Fix build errors 2020-01-19 15:22:59 +02:00
CTCaer
2a161b572b sdmmc: Set power cycle wait to 0 at boot 2020-01-17 09:19:58 +02:00
CTCaer
422852795f ini: Remove \r stripping as is done by FatFS 2020-01-17 09:18:31 +02:00
CTCaer
4d53f21387 mtc: Clear init magic on chainload 
Fixes a hang caused when rebooting 2 payload from L4T with old hekate in vendor partition.

L4T does not overwrite the nyx storage where the Minerva configuration is stored.
This makes new Minerva parse the wrong tables from old hekate and eventually hang the RAM, which causes an exception on BPMP.
 2020-01-14 23:41:15 +02:00
CTCaer
9263e2192f nyx: Fix low battery voltage color 2020-01-07 06:50:33 +02:00
CTCaer
c99a87dd09 clock: Move PLLC config from bpmp.c to clock.c 2020-01-07 06:46:22 +02:00
CTCaer
009db77426 bpmp: Switch to PLLC for SCLK/BPMP clock source 2020-01-07 06:26:29 +02:00
CTCaer
2f43145131 uart: Add invert, get/set IIR and fifo empty functions 2019-12-16 22:16:40 +02:00
CTCaer
e3fca2bce5 uart: Add timeout and len report to uart receive 2019-12-16 22:15:21 +02:00
CTCaer
da112a0ae9 uart: Proper uart init 2019-12-16 22:12:09 +02:00
CTCaer
90060d1d83 mtc: Don't rely on clean BSS for Minerva lib 2019-12-16 22:06:13 +02:00
CTCaer
1ccce5f1a2 gfx: Fix off-by-one in right half of 16px rendering 2019-12-16 21:49:54 +02:00
CTCaer
2aaa0331ac rtc: Add epoch convertion functions 
Thanks @shchmue for the HOS conversion
 2019-12-14 22:27:07 +02:00
CTCaer
7604239237 bpmp: Update driver to latest 2019-12-14 22:21:42 +02:00
CTCaer
1e4d63731b nyx: Fix about screen 2nd pane left margin 2019-12-12 00:20:14 +02:00
CTCaer
a664118fc7 r2p: Update r2p payload 
2 modes:
- With updater2p; Forces the reboot to payload binary to be hekate
- Without; Checks if hekate and then if old
 2019-12-12 00:13:32 +02:00
CTCaer
c6e92311f9 Add error printing for issues with libraries 
It will now show erros for the following:
- Missing or old libsys_minerva.bso (DRAM training).
- Missing libsys_lp0.bso (LP0 sleep mode).
- Missing or old Nyx version
 2019-12-11 11:22:11 +02:00
CTCaer
24d30a40f9 hos: Add Atmosphere's system mem increase patches 2019-12-10 19:20:02 +02:00
CTCaer
e4f7928513 minerva: Fix compatibility check for hekate main 
Init now also returns status.
 2019-12-09 22:27:01 +02:00
CTCaer
bd8a5ece58 heap: Fix type for heap monitor memset size 2019-12-09 19:30:45 +02:00
CTCaer
d0850516ab Bump hekate to v5.1.0 and Nyx to v0.8.3 2019-12-08 18:59:00 +02:00
CTCaer
4c5a78de6f hos: Fix pkg2 keygen with newer sept 
This change also adds support for older sept binaries.
 2019-12-08 18:32:09 +02:00
CTCaer
c12c696e53 hos: Add 9.1.0 support 2019-12-08 03:01:21 +02:00
CTCaer
f256bd5909 Move all I/DRAM addresses into a memory map 
Many addresses were moved around to pack the memory usage!
 2019-12-08 02:23:03 +02:00
CTCaer
0290892b23 nyx hw reconfig: Add fan and 5V regulators deinit 
Additionally re-arrange minerva and mmu after these.
 2019-12-08 01:41:57 +02:00
CTCaer
643a8ea8f9 fan: Update driver 
Make use of 5V regulator driver and fixe some bugs
 2019-12-08 01:38:12 +02:00
CTCaer
a6d8854499 power: Add 5V regulator driver 2019-12-08 01:36:35 +02:00
CTCaer
96bafd8bd7 nyx: Use color when battery voltage < 3200mV 
For status bar and Battery Info.
 2019-12-08 01:32:26 +02:00
CTCaer
65ee728939 nyx: Enable fan when temps are high 2019-12-08 01:26:26 +02:00
CTCaer
e1748a0727 nyx: Boost eMMC backup/restore verification times 
This change allows SE to start verifying the first buffer while the 2nd is populated. Effectively cutting verification down to almost half.
 2019-12-08 01:20:05 +02:00
CTCaer
35e853fd03 touch: Change I2C4 pinmuxing as per HOS 2019-12-07 23:23:01 +02:00
CTCaer
7e26be6587 lvgl: Optimize color blending 
The manual optimization done dramatically increases performance in software color blending.
Isolated gains reach 20-30%.

Color blending calculates 2 +1 color channels instead of the expensive 1+1+1 calculations.

This is as best as it gets without going in asm optimizations.
 2019-12-07 20:47:19 +02:00