mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-12-23 08:32:04 +00:00
Code Issues Releases Activity
1621 commits 2 branches 75 tags 5.5 MiB
Commit graph

47 commits

Author SHA1 Message Date
CTCaer
93296c2c38 bdk: joycon: add packet size checks 
Pass the real received data size and do the proper checks for minimum info.
 2024-05-19 17:42:10 +03:00
CTCaer
7af343dd6c bdk: input: make joycon detection more robust 
There's a hw bug on the gpio controller that can latch the last value on reads.
Mitigate that by reading once to unlatch the input value.

Also actually allow sio to be polled every 8ms.
 2024-05-19 10:19:25 +03:00
CTCaer
28960728f9 bdk: joycon: add bit numbers on the button struct 2024-04-25 04:46:27 +03:00
CTCaer
902ccede9a bdk: joycon: use proper bits for batt levels 2024-04-25 04:45:50 +03:00
CTCaer
eff55ff378 bdk: touch: rename samsung touch panel 
BH2109 is the board model and not the touch panel.
 2023-12-25 02:41:42 +02:00
CTCaer
ce137852b7 bdk: change some defines and comments 2023-10-12 06:59:15 +03:00
CTCaer
fdf0dcc636 bdk: joycon: add info about sio imu report 2023-08-22 14:36:23 +03:00
CTCaer
d7ad9b874b bdk: use the typedefs on jc calib 2023-06-11 13:27:48 +03:00
CTCaer
bc0eea11f3 bdk: joycon: add calibration struct 2023-06-08 02:44:35 +03:00
CTCaer
50811aacfa bdk: touch: reorder power on 
So touch IC reset can be properly done on a fast power cycle.
 2023-03-31 09:08:20 +03:00
CTCaer
9a98c1afb9 bdk: stylistic corrections 
And update copyrights
 2023-02-11 23:46:38 +02:00
CTCaer
5bb9a244ea bdk: utilize new gpio functions 2023-02-11 23:08:32 +02:00
CTCaer
ff5ee9758d bdk: joycon: refactor some structs and comments 2022-10-11 03:49:18 +03:00
CTCaer
70523e404f bdk: whitespace refactor 2022-07-11 22:10:11 +03:00
CTCaer
b787053c2d bdk: joycon: fixup hori pads 
For Hori game pads:
- Restore the no power down fix
- Revert RTS signal back to active high
 2022-07-01 13:47:41 +03:00
CTCaer
b0c0a86108 bdk: migrate timers/sleeps to timer driver 2022-06-27 10:22:19 +03:00
CTCaer
9e613a7600 bdk: hwinit: simplify uart debug port paths 2022-05-13 03:56:59 +03:00
CTCaer
f31170bb51 bdk: joycon: add Sio support (for Hoag) 2022-05-09 06:09:06 +03:00
CTCaer
47d06d0e8a bdk: joycon: use flow control to improve packet integrity 2022-05-09 05:55:06 +03:00
CTCaer
2aed1b3b83 bdk: joycon: add 3 mbaud support and full init 
Additionally use states for proper init
 2022-05-09 05:48:10 +03:00
CTCaer
833a115eb2 bdk: joycon: improve and streamline jc detect 2022-05-09 05:39:45 +03:00
CTCaer
9f30c51bd1 bdk: joycon: refactor driver 2022-05-09 05:32:32 +03:00
CTCaer
f7bf4af3ec bdk: uart: refactor and add new functionality 
- Allow to set CTS/RTS mode (only specific combos supported for now)
- Support the above modes in receiving
- Set 2 stop bits to decreases errors on high baudrates
 2022-05-08 05:45:16 +03:00
CTCaer
70504c295e bdk: various functionality independent changes 2022-01-16 01:03:24 +02:00
CTCaer
09b3e47ac8 bdk: touch: rename samsung touch panel 2021-10-19 09:11:58 +03:00
CTCaer
6992ece762 bdk: touch: add samsung touch model name 2021-10-15 16:09:25 +03:00
CTCaer
3e15eb44ab touch: rename 4th panel so it's not confused with errors 2021-08-28 16:39:38 +03:00
CTCaer
1f4f41b6e6 als: Update ambient light sensor driver to use integers 
Additionally separate calibration so later Aula one can be used
 2021-06-08 05:49:16 +03:00
CTCaer
c29db97f73 hwinit/joycon: move uart clock deinits to joycon driver 2021-05-11 10:24:48 +03:00
CTCaer
d7ce2a81db bpmp: return previous fid when setting a new one 2021-05-11 09:21:12 +03:00
CTCaer
dbe431095a touch: report gpio info in case of unknown panel 2021-03-17 08:53:23 +02:00
CTCaer
513f77a2ad uart: use proper interrupt decoding 2021-03-17 08:51:49 +02:00
CTCaer
7a27a7b3b5 joycon: Disable regulators before sending the sleep cmd 2021-02-08 03:49:04 +02:00
CTCaer
c6c396ce2a reg5V: Manage battery source based on charger status 2021-01-11 21:30:59 +02:00
CTCaer
0959dc3a2d nyx: Add touch panel info 
This can probably also show if the panel is paired to the firmware.
In case it's not, an error will show up.
 2021-01-04 02:49:07 +02:00
CTCaer
745ac609d2 max7762x: Update everything to use the improved pmic management 2021-01-04 02:41:15 +02:00
CTCaer
adf2045896 joycon: Do not send CRC if nxpad + some refactoring 2021-01-03 15:37:44 +02:00
Franz-Josef Haider
e491a4cf57 joycon: add support for the hori split pad pro 2020-12-31 13:54:00 +02:00
CTCaer
5b8fb9fb6b Various refactoring and addition of comments 2020-12-11 17:25:59 +02:00
CTCaer
202540c7f7 joycon: Disable driver for Switch Lite 2020-12-02 00:51:29 +02:00
CTCaer
cabaa6cfb8 Utilize BIT macro everywhere 2020-11-26 01:41:45 +02:00
CTCaer
bbc3f41493 joycon: Fix controller button masking 
Previously if the Right JC was missing it would clear the Capture button that's on the Left one
 2020-11-15 13:10:44 +02:00
CTCaer
dae7be8ec4 nyx: Allow disabling of Joycon 
Setting `jcdisable=1` in nyx.ini disables the usage of Joycon completely.

This also disables the BT pairing data dumping tool.
 2020-10-20 10:21:48 +03:00
CTCaer
4fc420616d nyx: Control UART debug completely via makefile 
Also enables LvGL log.
 2020-08-13 10:21:00 +03:00
CTCaer
638a3909c5 Refactor various variables and names 2020-07-17 18:00:32 +03:00
CTCaer
6e256d29c7 Utilize hekate's BDK for hekate main and Nyx 2020-06-14 16:45:45 +03:00
CTCaer
185526d134 Introducing Bootloader Development Kit (BDK) 
BDK will allow developers to use the full collection of drivers,
with limited editing, if any, for making payloads for Nintendo Switch.

Using a single source for everything will also help decoupling
Switch specific code and easily port it to other Tegra X1/X1+ platforms.
And maybe even to lower targets.

Everything is now centrilized into bdk folder.
Every module or project can utilize it by simply including it.

This is just the start and it will continue to improve.
 2020-06-14 15:25:21 +03:00