Drakia
a446aca2c4
Fix a few issues in the secondary kernel_patches.c file
2018-06-17 19:28:19 -07:00
hexkyz
fca9ed2a15
Merge pull request #145 from Traiver/master
...
fusee: Add 4.1.0 kernel patch definitions
2018-06-17 16:56:36 +01:00
Traiver
33af704ee2
Update kernel_patches.c
2018-06-17 15:54:06 +02:00
Traiver
57819fa345
Update kernel_patches.c
2018-06-17 14:02:08 +02:00
Traiver
0295c8a51d
Update kernel_patches.c
2018-06-17 12:38:57 +02:00
Traiver
b211a7cf05
add kernel patches for 4.1.0
2018-06-17 11:00:42 +02:00
DavidBuchanan314
20a721a4a6
fusee: correct 4.x free_code_space_offset value
2018-06-13 22:26:00 +01:00
DavidBuchanan314
58d2f8f0a5
fusee: Add 3.0.0-3.0.1 kernel hash (and free_code_space_offset)
2018-06-13 22:08:18 +01:00
Tomasz Moń
206c10f333
Rework sdmmc clocking configuration
...
Use 204 MHz as host clock in SDR104 mode instead of 136 MHz.
Due to this, also change the frequency init divider so the
initialization frequency is below 400 kHz.
This makes the clocks for SDMMC1 in all modes to match the TRM table.
Make it clear in the code that HS200/HS400 modes in fact use PLLP_OUT0
and not PLLC4_OUT2_LJ like the comment suggest. In fact selecting the
PLLC4_OUT2_LJ as clock source results in freeze after switching to
HS200/HS400 mode. This is most likely related to the PLLC4 not being
enabled, but it should be checked later.
Set the HS200/HS400 divider to 3, as this is what the code really did
set prior to this change - so this commit does not change that.
Configure Legacy 12 MHz clock to run at 12 MHz using the SW default
configuration (as per TRM) for the SDMMC legacy timer.
Introduce initial version of sdmmc_host_clock_delay() in order to use it
in places where the wait is host clock dependent. The way it is
implemented now does not change the sleep that was used instead.
2018-06-12 17:20:15 +02:00
Max K
d8c9399cff
fusee: Run periodic autocal only on the uSD controller ( #137 )
2018-06-10 21:09:48 -07:00
hexkyz
ceb93867b4
Merge pull request #132 from tslater2006/master
...
Add sdmmc_dump_regs function
2018-06-10 16:21:18 +01:00
Tomasz Moń
804a40830e
Fix race conditions and misconfiguration in sdmmc
...
Properly configure pull up and pull down offsets for autocal.
Run autocal prior to every transfer.
Prevent race conditions in sdmmc_wait_for_event() - make sure the fault
handler has highest priority, then the target irq, state conditions and
finally the error mask.
Do not clear all bits (|=) when acknowledging fault conditions,
only acknowledge the fault conditions itself.
Enable interrupts before preparing command registers - if sdmmc is fast
enough it can actually finish transfer before we enabled the interrupts.
Enabling interrupts clears the COMMAND COMPLETE status bit.
Temporarily print all the sdmmc messages in stage2 - for yet unknown
reason respecting the log level results in some failures.
This results in working microsd card in stage2 on my switch with Samsung
EVO+ 256GB microsd card.
2018-06-09 17:37:53 +02:00
Timothy Slater
a79d3454d8
Switched to mmc_debug, and use inttypes
2018-06-08 07:50:36 -05:00
Timothy Slater
7df8ca7c4b
use printf instead of printk for secondary
2018-06-07 13:05:41 -05:00
Timothy Slater
ca907077af
Add sdmmc_dump_regs function
2018-06-07 12:55:29 -05:00
Tomasz Moń
7b9dcd2f1a
Make sdmmc autocalibration follow TRM procedure
...
Sleep for 1 us, not 1 ms.
Timeout after 10 ms, set driver strength code values according to TRM.
Fix typo (mS) - time is in milliseconds, not milliSiemens.
2018-06-05 19:07:14 +02:00
TuxSH
0491a21a99
Fix logic bug in stage2's main function
2018-06-05 16:18:02 +02:00
Max K
6b7da2887f
package2 verification and ini1 merging fixes ( #125 )
...
* fusee: Incremet offset while reading kip1s
* fusee: Pass package2 section data along with the decrypted metadata
2018-06-04 14:04:44 -07:00
TuxSH
b2139ed182
Pass screen status and mmc struct from stage1 to 2
2018-06-04 19:17:23 +02:00
hexkyz
7e5fda86b2
Merge pull request #114 from desowin/sdmmc-errata
...
Set SDMMC controller to SDR104 as a workaround
2018-06-04 16:20:19 +01:00
langerhans
41429e9120
fusee: Add kernel hash for 4.x
2018-06-03 16:59:21 +02:00
Michael Scire
968c86578a
Fusee: Add 5.x kernel patches to allow for IPC PID mitm.
2018-06-02 20:01:44 -06:00
Michael Scire
cc69079d73
Fusee: Add mechanism for branching back at end of hook.
2018-06-02 19:11:50 -06:00
Max K
8ec3a53d73
Fix CCPLEX bringup and halt the BPMP once it's done booting. ( #118 )
2018-06-02 17:24:02 -07:00
Michael Scire
b3a7086b7e
Fusee: Add infrastructure for applying kernel patches (needed for mitm)
2018-06-02 16:06:31 -06:00
Michael Scire
1ba8a92030
Fusee: Separate kernel patching into its own file.
2018-06-02 16:06:31 -06:00
Tomasz Moń
0534e36cf8
Set SDMMC controller to SDR104 as a workaround
...
According to Tegra X1 Series Processors Silicon Errata there is possible
misalignment of received data which results in a CRC error. The issue is
present only in SDR50 mode.
2018-05-27 17:43:25 +02:00
TuxSH
c9723d7b68
Refactor fusee's makefile
2018-05-27 00:59:02 +02:00
TuxSH
d57f4c54a9
Fix mmc->allow_voltage_switching assignment in sdmmc_init
2018-05-24 17:39:36 +02:00
TuxSH
4d43a86b60
Copy latest sdmmc driver to stage2
2018-05-24 01:17:13 +02:00
TuxSH
fd77e5543e
Add debug comment for exosphère
2018-05-23 18:46:39 +02:00
TuxSH
16ad355f45
Unstub "Validate section hashes."
2018-05-23 18:45:53 +02:00
Kate J. Temkin
eaf8e559d6
fusee: work around some dual-init SDMMC issues
2018-05-23 07:47:02 -06:00
TuxSH
a4b1cf8b50
Stage1: fix SE issue too
2018-05-21 21:18:30 +02:00
Michael Scire
c64d7904b4
Fusee: Fix se_calculate_sha256
2018-05-21 13:07:46 -06:00
TuxSH
561fa90669
Use uintX_t for the SE & copy bugfixed SE struct definition
2018-05-21 19:05:00 +02:00
TuxSH
f39622c421
Stage2: Fix bug, add more debug printfs to nxboot. The CCPLEX doesn't turn on
2018-05-21 18:42:42 +02:00
TuxSH
5920f5a4b0
Stage2: fix various bugs in package2.c
2018-05-21 18:18:12 +02:00
TuxSH
ffd0b5df6a
Fix bug in stratosphere_get_ini1, etc.
2018-05-21 17:45:05 +02:00
TuxSH
0e9a304533
stage2: package2: bypass hash checks for now
2018-05-21 17:42:10 +02:00
TuxSH
ecb83903c0
Stage1: fix potential alignment issue
2018-05-21 14:18:03 +02:00
Kate J. Temkin
ac7ee45493
fusee: improve SDR104 frequency and support AUTOCMD23
2018-05-21 04:24:50 -06:00
TuxSH
bf2c6dff25
Stage2: Add exception handlers
2018-05-21 03:50:53 +02:00
TuxSH
c1687905a3
Fix stack overflow when chainloading stage2
2018-05-21 03:42:05 +02:00
TuxSH
ea2693dd2d
Fix exception handlers (thanks @fincs)
2018-05-21 03:39:18 +02:00
TuxSH
43d1816ac2
[stage1] Add exception handlers... which somehow don't work?
2018-05-21 02:24:41 +02:00
TuxSH
83d9d874e6
Fusee use CAR reboot for fatal errors
2018-05-20 23:52:09 +02:00
TuxSH
4ec7d0fc82
Remove packed when not needed
2018-05-20 22:57:25 +02:00
TuxSH
57ff5e694a
Don't check for panics in stage2
2018-05-20 22:00:11 +02:00
TuxSH
3dd6ec5f6c
wtf pmc reboot doesn't fully work -- display doesn't reinitialize
2018-05-20 16:56:15 +02:00
TuxSH
f45bc83bc4
Introduce fatal_error
2018-05-20 16:18:48 +02:00
Kate J. Temkin
add03d5774
fusee: correct computation of tuning block size
2018-05-20 07:21:49 -06:00
Kate J. Temkin
d5411b5b1f
fusee: begin adding support for MMC HS modes
2018-05-20 07:05:35 -06:00
Kate J. Temkin
5f3fc8156c
fusee: SD: implement tuning, allowing for all SD UHS-I speed
2018-05-20 07:05:35 -06:00
Kate J. Temkin
38350e769c
fusee: SD driver: implement everything necessary for UHS except tuning
2018-05-20 07:05:35 -06:00
Kate J. Temkin
633c5e95ed
fusee: correct constants in CAR
2018-05-20 07:05:35 -06:00
Kate J. Temkin
817c42efc2
fusee: handle SDMMC speeds sanely
2018-05-20 07:05:35 -06:00
TuxSH
ec7e0d923d
Add custom panic driver
2018-05-20 14:11:46 +02:00
TuxSH
c820375a86
Make struct tegra_pmc not packed
2018-05-20 01:40:23 +02:00
TuxSH
64cdd2e63f
Actually don't use memcpy in sdmmc
2018-05-19 03:10:06 +02:00
TuxSH
2a98e2e3b8
Sync sdmmc changes between stage1 and 2
2018-05-19 02:50:50 +02:00
TuxSH
2bc2fe1452
Use memcpy instead of raw casts in sdmmc.c
2018-05-19 01:33:07 +02:00
TuxSH
b4eeddd7e1
Revamp all the Makefiles (thanks @fincs @WinterMute)
...
... dependencies are now properly handled (e.g. header changes, etc.)
2018-05-19 01:07:27 +02:00
Kate J. Temkin
7bfdf63a71
fusee sdmmc: don't time out on long reads
2018-05-18 07:43:09 -06:00
TuxSH
e0a5acd0ba
[stage2] Add more debugging printfs to package2.c, etc.
2018-05-18 00:24:06 +02:00
TuxSH
993db7ee95
Fix nxboot mkey rev misconception
2018-05-18 00:11:44 +02:00
TuxSH
ec6d05892c
Refactor nxboot package2 reading, work around sdmmc issue, other changes
2018-05-17 23:18:33 +02:00
TuxSH
9ed2f92cdc
[stage2] Fix some FS bugs
2018-05-17 19:53:42 +02:00
TuxSH
3dac6c9268
Fix bug in fusee: package2.c, etc.
2018-05-17 16:11:10 +02:00
TuxSH
1b07a07353
Fusee: Change package2 loading logic (untested)
2018-05-17 15:56:02 +02:00
Michael Scire
5088851de4
Fusee: fix unused var
2018-05-17 07:15:55 -06:00
Michael Scire
bb1dcb2655
Fusee: Implement BIS crypto functions.
2018-05-17 07:15:29 -06:00
TuxSH
5631b27449
Fix out-of-bounds partition r/w bugs in raw_dev.c
2018-05-17 14:39:16 +02:00
TuxSH
858b40e5fb
GPT entry LBA range is inclusive
2018-05-17 14:38:19 +02:00
TuxSH
85bfbeccc3
Fix latest commit
2018-05-17 02:07:11 +02:00
TuxSH
52d2af86b6
Fix BCT version parsing
2018-05-17 01:54:19 +02:00
TuxSH
9309b0bed5
Don't overflow devoptabs, etc.
2018-05-17 01:53:32 +02:00
TuxSH
468a063c03
Load the appropriate package1 key. The warmboot fw is now properly read.
2018-05-16 23:19:55 +02:00
TuxSH
348b2457e0
Fix key derivation regression
2018-05-16 23:04:54 +02:00
TuxSH
c71e7c8c2e
[stage2] Add "hexdump"
2018-05-16 19:59:14 +02:00
TuxSH
0d5796fa0b
Align crypto buffers to 16 bytes in key_derivation.c
2018-05-16 19:57:36 +02:00
TuxSH
ab4518b9c1
Simplify some logic in derive_nx_keydata
2018-05-16 18:41:16 +02:00
TuxSH
c0617982b8
Fix typo in decrypting all keyblobs (thanks @tslater2006 !)
2018-05-16 16:45:44 +02:00
Michael Scire
1182ea23a5
Fusee: Fix typo when decrypting keyblobs.
2018-05-16 02:39:13 -06:00
Michael Scire
fa71e9cb15
Fusee: Decrypt all keyblobs during key derivation.
2018-05-16 02:06:59 -06:00
TuxSH
f84645e91f
Simplify package1_get_encrypted_package1
2018-05-16 02:55:48 +02:00
TuxSH
34a658ce4c
Fix package1_read_and_parse_boot0
...
Key derivation is now working
2018-05-16 01:46:08 +02:00
TuxSH
db929925f3
Fix TSEC key fetching, thanks to @rajkosto
2018-05-16 00:37:07 +02:00
TuxSH
6c50723209
Fix tsec.c (thanks @rajkosto @tslater2006), fixes #106
2018-05-15 23:59:20 +02:00
TuxSH
9a86ffec68
Fix diskio.c, etc.
2018-05-15 23:54:33 +02:00
TuxSH
42fd4f73cf
Remove stray debug printf in gpt.c
2018-05-15 22:10:45 +02:00
TuxSH
60dbc7c9d7
┬┴┬┴┤( ͡° ͜ʖ├┬┴┬┴
2018-05-15 21:08:57 +02:00
Luke Street
f5ab896343
[stage2] Invert a few checks
2018-05-15 14:40:18 -04:00
TuxSH
62ebf20e25
Fix typo in nxboot.c
2018-05-15 20:24:37 +02:00
TuxSH
1288f54965
Finish writing stratosphere_get_ini1
2018-05-15 19:50:20 +02:00
TuxSH
3c0436b98f
Write more code for stratosphere_get_ini1, make it and its caller take target_firmware
2018-05-15 16:09:06 +02:00
TuxSH
4e1a368b43
Write more of stratosphere_get_ini1
2018-05-15 12:38:07 +02:00
TuxSH
af2de57fdc
Embed exosphere, thermosphere, loader, pm, sm into fusee-secondary
...
Still needs boot and boot2 to be built as proper KIPs
2018-05-15 02:45:31 +02:00
TuxSH
d9c2a54464
Make a top-level make build everything in order
2018-05-15 01:30:56 +02:00
TuxSH
172a2b679c
Fix strncpy bugs in fusée, etc.
2018-05-15 01:18:05 +02:00
