162 commits

Author	SHA1	Message	Date
Tomasz Moń	804a40830e	Fix race conditions and misconfiguration in sdmmc ... Properly configure pull up and pull down offsets for autocal. Run autocal prior to every transfer. Prevent race conditions in sdmmc_wait_for_event() - make sure the fault handler has highest priority, then the target irq, state conditions and finally the error mask. Do not clear all bits (|=) when acknowledging fault conditions, only acknowledge the fault conditions itself. Enable interrupts before preparing command registers - if sdmmc is fast enough it can actually finish transfer before we enabled the interrupts. Enabling interrupts clears the COMMAND COMPLETE status bit. Temporarily print all the sdmmc messages in stage2 - for yet unknown reason respecting the log level results in some failures. This results in working microsd card in stage2 on my switch with Samsung EVO+ 256GB microsd card.	2018-06-09 17:37:53 +02:00
Tomasz Moń	7b9dcd2f1a	Make sdmmc autocalibration follow TRM procedure ... Sleep for 1 us, not 1 ms. Timeout after 10 ms, set driver strength code values according to TRM. Fix typo (mS) - time is in milliseconds, not milliSiemens.	2018-06-05 19:07:14 +02:00
TuxSH	0491a21a99	Fix logic bug in stage2's main function	2018-06-05 16:18:02 +02:00
Max K	6b7da2887f	package2 verification and ini1 merging fixes (#125) ... * fusee: Incremet offset while reading kip1s * fusee: Pass package2 section data along with the decrypted metadata	2018-06-04 14:04:44 -07:00
TuxSH	b2139ed182	Pass screen status and mmc struct from stage1 to 2	2018-06-04 19:17:23 +02:00
hexkyz	7e5fda86b2	Merge pull request #114 from desowin/sdmmc-errata ... Set SDMMC controller to SDR104 as a workaround	2018-06-04 16:20:19 +01:00
langerhans	41429e9120	fusee: Add kernel hash for 4.x	2018-06-03 16:59:21 +02:00
Michael Scire	968c86578a	Fusee: Add 5.x kernel patches to allow for IPC PID mitm.	2018-06-02 20:01:44 -06:00
Michael Scire	cc69079d73	Fusee: Add mechanism for branching back at end of hook.	2018-06-02 19:11:50 -06:00
Max K	8ec3a53d73	Fix CCPLEX bringup and halt the BPMP once it's done booting. (#118)	2018-06-02 17:24:02 -07:00
Michael Scire	b3a7086b7e	Fusee: Add infrastructure for applying kernel patches (needed for mitm)	2018-06-02 16:06:31 -06:00
Michael Scire	1ba8a92030	Fusee: Separate kernel patching into its own file.	2018-06-02 16:06:31 -06:00
Tomasz Moń	0534e36cf8	Set SDMMC controller to SDR104 as a workaround ... According to Tegra X1 Series Processors Silicon Errata there is possible misalignment of received data which results in a CRC error. The issue is present only in SDR50 mode.	2018-05-27 17:43:25 +02:00
TuxSH	c9723d7b68	Refactor fusee's makefile	2018-05-27 00:59:02 +02:00
TuxSH	d57f4c54a9	Fix mmc->allow_voltage_switching assignment in sdmmc_init	2018-05-24 17:39:36 +02:00
TuxSH	4d43a86b60	Copy latest sdmmc driver to stage2	2018-05-24 01:17:13 +02:00
TuxSH	fd77e5543e	Add debug comment for exosphère	2018-05-23 18:46:39 +02:00
TuxSH	16ad355f45	Unstub "Validate section hashes."	2018-05-23 18:45:53 +02:00
Michael Scire	c64d7904b4	Fusee: Fix se_calculate_sha256	2018-05-21 13:07:46 -06:00
TuxSH	561fa90669	Use uintX_t for the SE & copy bugfixed SE struct definition	2018-05-21 19:05:00 +02:00
TuxSH	f39622c421	Stage2: Fix bug, add more debug printfs to nxboot. The CCPLEX doesn't turn on	2018-05-21 18:42:42 +02:00
TuxSH	5920f5a4b0	Stage2: fix various bugs in package2.c	2018-05-21 18:18:12 +02:00
TuxSH	ffd0b5df6a	Fix bug in stratosphere_get_ini1, etc.	2018-05-21 17:45:05 +02:00
TuxSH	0e9a304533	stage2: package2: bypass hash checks for now	2018-05-21 17:42:10 +02:00
TuxSH	bf2c6dff25	Stage2: Add exception handlers	2018-05-21 03:50:53 +02:00
TuxSH	83d9d874e6	Fusee use CAR reboot for fatal errors	2018-05-20 23:52:09 +02:00
TuxSH	4ec7d0fc82	Remove packed when not needed	2018-05-20 22:57:25 +02:00
TuxSH	57ff5e694a	Don't check for panics in stage2	2018-05-20 22:00:11 +02:00
TuxSH	3dd6ec5f6c	wtf pmc reboot doesn't fully work -- display doesn't reinitialize	2018-05-20 16:56:15 +02:00
TuxSH	f45bc83bc4	Introduce fatal_error	2018-05-20 16:18:48 +02:00
TuxSH	ec7e0d923d	Add custom panic driver	2018-05-20 14:11:46 +02:00
TuxSH	c820375a86	Make struct tegra_pmc not packed	2018-05-20 01:40:23 +02:00
TuxSH	64cdd2e63f	Actually don't use memcpy in sdmmc	2018-05-19 03:10:06 +02:00
TuxSH	2a98e2e3b8	Sync sdmmc changes between stage1 and 2	2018-05-19 02:50:50 +02:00
TuxSH	2bc2fe1452	Use memcpy instead of raw casts in sdmmc.c	2018-05-19 01:33:07 +02:00
TuxSH	b4eeddd7e1	Revamp all the Makefiles (thanks @fincs @WinterMute) ... ... dependencies are now properly handled (e.g. header changes, etc.)	2018-05-19 01:07:27 +02:00
TuxSH	e0a5acd0ba	[stage2] Add more debugging printfs to package2.c, etc.	2018-05-18 00:24:06 +02:00
TuxSH	993db7ee95	Fix nxboot mkey rev misconception	2018-05-18 00:11:44 +02:00
TuxSH	ec6d05892c	Refactor nxboot package2 reading, work around sdmmc issue, other changes	2018-05-17 23:18:33 +02:00
TuxSH	9ed2f92cdc	[stage2] Fix some FS bugs	2018-05-17 19:53:42 +02:00
TuxSH	3dac6c9268	Fix bug in fusee: package2.c, etc.	2018-05-17 16:11:10 +02:00
TuxSH	1b07a07353	Fusee: Change package2 loading logic (untested)	2018-05-17 15:56:02 +02:00
Michael Scire	5088851de4	Fusee: fix unused var	2018-05-17 07:15:55 -06:00
Michael Scire	bb1dcb2655	Fusee: Implement BIS crypto functions.	2018-05-17 07:15:29 -06:00
TuxSH	5631b27449	Fix out-of-bounds partition r/w bugs in raw_dev.c	2018-05-17 14:39:16 +02:00
TuxSH	858b40e5fb	GPT entry LBA range is inclusive	2018-05-17 14:38:19 +02:00
TuxSH	85bfbeccc3	Fix latest commit	2018-05-17 02:07:11 +02:00
TuxSH	52d2af86b6	Fix BCT version parsing	2018-05-17 01:54:19 +02:00
TuxSH	9309b0bed5	Don't overflow devoptabs, etc.	2018-05-17 01:53:32 +02:00
TuxSH	468a063c03	Load the appropriate package1 key. The warmboot fw is now properly read.	2018-05-16 23:19:55 +02:00