CTCaer
c4567ab2b5
nyx: set touch indev also and name them
...
Just keep it around for any reference.
2024-05-19 12:08:47 +03:00
CTCaer
0544f9143f
nyx: tools: allow dynamic size for boot partitions
...
Let UMS driver set the size in case the partition is bigger.
That doesn't affect anything other than allowing the host to see the whole
physical partition.
2024-05-19 10:58:53 +03:00
CTCaer
5453c593a3
hekate/nyx: adhere to hw_deinit change
2024-05-19 10:49:46 +03:00
CTCaer
ef1e328e11
bdk: info: revamp eMMC partition table info
...
Allow a max of 20 partitions to be shown
2024-04-25 04:57:31 +03:00
CTCaer
77782b974c
nyx: info: report oem id for eMMC
2024-04-25 04:55:17 +03:00
CTCaer
38f4902e1d
nyx: info: change touch fw version format
2024-04-25 04:54:58 +03:00
CTCaer
9cfe1d2162
nyx: add info about 6.2" oem panel clone
2024-03-29 16:34:08 +02:00
CTCaer
cfbbafe72f
nyx: change imu cal warning message
2024-03-29 13:42:41 +02:00
CTCaer
5607fd18ea
hos: 18.0.0 support
2024-03-29 13:21:53 +02:00
CTCaer
06b7a38d47
nyx: retry to dump imu cal and skip it failed
...
On devices with mangled cal0 imu calibration can now be skipped (still mandatory on Lite).
2024-03-29 13:21:53 +02:00
CTCaer
4effaab241
hekate/nyx: use zalloc where appropriate
2024-03-27 09:16:06 +02:00
CTCaer
0100c11757
nyx: info: show unknown for relevant eMMC vendors
2024-03-13 02:02:09 +02:00
CTCaer
cdf0f30b17
hekate/nyx: smmu refactor
2024-03-13 01:56:31 +02:00
CTCaer
e341cf39f2
hekate/nyx: apply ccplex changes
...
HOS procedure can now launch secmon from coldboot again when HOS is 6.2.0.
And update L4T for the function signature change.
2024-03-13 01:49:31 +02:00
CTCaer
82925845e3
hekate/nyx: utilize existing block size defines
2024-03-12 15:53:05 +02:00
CTCaer
7d1600b85c
bdk: consolidate ffsystem into bdk
2024-03-12 15:16:18 +02:00
CTCaer
b1e6661a7a
nyx: get rtc adjustments via driver
2024-03-12 15:11:32 +02:00
CTCaer
2ff2a5df2f
nyx: add error code info on lite gamepad dumping
2024-02-22 11:44:43 +02:00
CTCaer
5f8814311e
nyx: info: add panel clone info
2024-02-21 10:42:28 +02:00
Thomas Makin
f37ae083ae
nyx: add android dynamic partition support
...
Will be used in Android >=13 for larger capacity and future-proofing.
New full system size: 6 GiB.
Partitions:
- boot
- recovery
- dtb
- misc
- cache
- super
- userdata
2024-02-16 17:17:12 +02:00
CTCaer
e96e74c72a
nyx: finer control of fan when temp is high
2024-02-16 16:07:27 +02:00
CTCaer
35c36908a1
hekate/nyx: change fs/clock year to 2024
2024-02-16 16:03:54 +02:00
CTCaer
6c518435ec
nyx: add info about 3rd gen micron lpddr4x
2024-02-14 02:18:01 +02:00
CTCaer
25e48472c8
nyx: add info about oem 5.5" panel
2024-02-14 02:17:45 +02:00
CTCaer
38a792e564
nyx: add penel rev and change some labels
2024-02-12 04:14:14 +02:00
CTCaer
8c5fdf52d4
nyx: correct dram info
...
Parse per module info on channel A, rank 0.
It was channel info on chip 0, rank0 before.
2024-02-12 04:13:39 +02:00
CTCaer
d1bae553ec
nyx: info: use the updated define for micron wtc
2024-01-06 22:06:21 +02:00
CTCaer
1522f1ee92
nyx: info: add max bus speed info for sd
2023-12-27 15:02:00 +02:00
CTCaer
e23d469f06
nyx: revamp jc/sio cal info dumping
...
Hoag:
- Add stick types
- Add imu type
All the rest:
- Add imu calibration info
- Add BT mac
2023-12-25 04:17:59 +02:00
CTCaer
39abeb9a28
nyx: improve fuses info
...
Correct the Chip ID Revision and also add actual (derived) iddq values.
2023-12-25 03:33:37 +02:00
CTCaer
80a32304cb
nyx: rename 3rd gen hynix ram chips
2023-12-25 03:21:17 +02:00
CTCaer
2e1a773a08
nyx: relax joycon calibration init
...
Wait a bit before actually doing stick calibration in order to avoid bad values.
2023-12-25 02:36:27 +02:00
CTCaer
d3d3768c8f
hos: correct max KB
2023-10-12 08:07:46 +03:00
CTCaer
697bde8667
hos: 17.0.0 support
2023-10-12 07:41:12 +03:00
CTCaer
533fb08a1c
nyx: info: K4U6E3S4AB-MGCL is now validated
2023-10-12 07:28:28 +03:00
CTCaer
c828539544
hos: pkg2: rename ini1 value offset
...
And simplify the logic a bit.
2023-10-12 07:26:55 +03:00
CTCaer
d1be18821d
hos: reduce pkg1 id to 8 chars to save space
2023-10-12 07:16:23 +03:00
CTCaer
613fdf621d
hos: rename KB defines
...
From KB_FIRMWARE_VERSION to HOS_KB_VERSION
2023-10-12 07:11:22 +03:00
CTCaer
5b13e81141
Adjust about-screens copyright year
2023-10-12 07:01:28 +03:00
CTCaer
e84367e302
nyx: swap and fix config save text
2023-08-23 00:10:10 +03:00
CTCaer
01a8f30925
nyx: add contact me for unknown ram chips
2023-08-22 16:44:03 +03:00
CTCaer
976a02f8bc
nyx: clock: fix year off-by-one
2023-08-07 21:12:18 +03:00
CTCaer
187b6d843e
nyx: emummc: allow migrating emummc backup
...
Now if an eMMC backup is not found, emuMMC backup will be used.
2023-08-07 21:11:17 +03:00
CTCaer
6de29094fe
nyx: gfx: add column control
...
gfx_getpos/setpos can now get/set column offset.
setpos column can be fully custom. Otherwise GFX_COL_KEEP or GFX_COL_AUTO (2 columns) can be used.
Additionally, always restore column when printing debug info in log screen.
2023-08-07 21:09:37 +03:00
CTCaer
09b1efe2a4
nyx: info: use updated defines
2023-07-31 17:09:04 +03:00
CTCaer
91393700ff
nyx: use restore/emummc folder for restoring
...
In order to avoid mistakes, emuMMC can now only be restored from `backup/{emmc_sn}/restore/emummc`.
2023-07-28 04:07:43 +03:00
CTCaer
b5fcdad33f
nyx: info: improve ram channel/rank detection
2023-07-28 03:40:32 +03:00
CTCaer
6061bb5213
nyx: info: add public key info
...
And remove LOT Code 1 since it's not used.
2023-07-28 03:38:40 +03:00
CTCaer
221614212a
nyx: info: add more cal0 info
...
Touch vendor, IMU type/mount and analog stick types.
2023-07-28 03:36:10 +03:00
CTCaer
5b94e8cf8a
nyx: info: use fuel gauge reg dump function
2023-07-28 03:35:08 +03:00