CTCaer
ff5ee9758d
bdk: joycon: refactor some structs and comments
2022-10-11 03:49:18 +03:00
CTCaer
a33663f759
nyx: Add info about Sharp LQ055T1SW10 panel
2022-10-11 03:47:05 +03:00
CTCaer
44b429d5cd
bdk: display: Name panel 1040 to Sharp LQ055T1SW10
2022-10-11 03:45:49 +03:00
CTCaer
b891657fb6
bdk: tsec: fix regression on HOS 6.2.0 not booting
...
With the latest BDK changes on enabling always on AHB redirect with a compile time flag, TSEC fw boot was regressed because it needs it off.
Always disable redirect and if the flag is enabled, enable it on exit.
2022-07-11 22:28:09 +03:00
CTCaer
801ebd3543
bdk: xusb: fully clear device mode ctrl register on deinit
2022-07-11 22:13:13 +03:00
CTCaer
d259d6f6d6
bdk: watchdog: clear timer interrupt also in handling
2022-07-11 22:10:41 +03:00
CTCaer
70523e404f
bdk: whitespace refactor
2022-07-11 22:10:11 +03:00
CTCaer
1499f958dd
Bump hekate to v5.8.0 and Nyx to v1.3.0
2022-07-01 13:47:47 +03:00
CTCaer
b787053c2d
bdk: joycon: fixup hori pads
...
For Hori game pads:
- Restore the no power down fix
- Revert RTS signal back to active high
2022-07-01 13:47:41 +03:00
CTCaer
fe7fd6370e
hekate/nyx: push some missed changes
2022-07-01 11:33:43 +03:00
CTCaer
535ea95086
hekate/nyx: gfx: add text color defines
...
And reduce code size when using W/EPRINTF macros
2022-07-01 04:37:57 +03:00
CTCaer
eba6b285ec
hekate: utilize watchdog to catch sd based hangs
...
Utilize watchdog when configuring LP0/Minerva.
A problematic SD card connector can cause corrupted reads to happen and thus cause hekate to hang on a black screen.
By using a watchdog there, such issues can be avoided and the user can get notified visually.
2022-06-29 12:19:19 +03:00
CTCaer
e921d8f51c
bdk: update memory map with more used addresses
2022-06-29 12:13:04 +03:00
CTCaer
57c8fd1f8c
bdk: fiq: watchdog handling
...
`BDK_WATCHDOG_FIQ_ENABLE` enables watchdog handling.
`BDK_RESTART_BL_ON_WDT` causes a reload of bootloader on FIQ
These 2 are useful when wanting to detect and handle hangs.
2022-06-29 12:12:03 +03:00
CTCaer
d38ddad873
bdk: display: correct night mode value
2022-06-27 10:27:18 +03:00
CTCaer
b0c0a86108
bdk: migrate timers/sleeps to timer driver
2022-06-27 10:22:19 +03:00
CTCaer
061e10152f
bdk: timer: add timer/watchdog driver
2022-06-27 10:20:25 +03:00
CTCaer
b65b2d7f71
bdk: se: do not use heap for linked lists
2022-06-27 09:14:43 +03:00
CTCaer
3369dcd110
nyx: if no full backup, backup MWS folder also
...
When full backup is not possible, together with bootloader folder, also backup mariko warmboot storage if it exists.
2022-06-25 06:47:12 +03:00
CTCaer
677770bfee
nyx: offer wipe if partitioning can backup files
2022-06-25 06:41:34 +03:00
CTCaer
50886382bf
bdk: list: add LIST_FOREACH_INVERSE and LIST_FOREACH_ENTRY_INVERSE
2022-06-25 05:59:53 +03:00
CTCaer
2378bf2863
bdk: ini: simplify kv free
2022-06-25 05:56:11 +03:00
CTCaer
e5ddac5211
bdk: sdmmc: rename current limit to power limit
2022-06-25 05:53:04 +03:00
CTCaer
489e222aac
bdk: sdmmc: expose csd/scr functions
2022-06-25 05:48:54 +03:00
CTCaer
16af97c79a
uart: rename print to printf
2022-06-25 05:42:42 +03:00
CTCaer
bdb8f6d352
ccplex: name some flow control values
2022-06-25 05:42:19 +03:00
CTCaer
e2f6e925c4
nyx: info: show total size of fat partition
2022-06-19 12:39:02 +03:00
CTCaer
258a343e21
bdk: usb: support deconfiguration of endpoints
...
TODO: Signal that to userspace and manage it.
2022-06-14 18:48:21 +03:00
CTCaer
f6c9e636d1
bdk: usb: improve USB2/XUSB power down
...
TODO: add more power downs on XUSB stack
2022-06-14 18:46:46 +03:00
CTCaer
605f270f98
bdk: usb: fix a race condition in USB2 stack
...
When RAM is slow (no training), it's possible to have the stack failing to negotiate configuration successfully.
The race condition is caused by not flushing cache before sending a configuration packet reply.
Although, cache is write-through, this needs to happen.
2022-06-14 18:41:33 +03:00
CTCaer
3fa01a1975
hekate: fix a bug in low battery monitor
...
Do not try to deinit display if it's not enabled.
Can happen if LBM disables display to reserve power while charging and user presses both VOL buttons to exit the mode.
2022-06-04 22:03:47 +03:00
CTCaer
0e526bf9e8
nyx: tools: fix hybrid mbr changes
...
- MBR is now checked if it has GPT partition, in order to avoid revival of a dead but valid GPT
- MBR secret attributes can now be cleared even if there's no GPT
2022-05-27 04:44:42 +03:00
CTCaer
c77c741c07
bdk: sdmmc: correct lower speed mode checks
...
Both bus widths of 8 and 4 should be checked for HS200 support and host type support, instead of giving 8-bit bus width a free pass.
2022-05-26 03:04:27 +03:00
CTCaer
358896eb7d
nyx: tools: inform user on erros in archive bit fixer
2022-05-21 14:24:43 +03:00
CTCaer
10205b17dd
hekate: remove sd mount/unmout management for payload launch
...
Callers manage it anyway.
Fixes a case where missing the payload would result to Nyx not relaunching because sd was unmount.
2022-05-21 13:10:12 +03:00
CTCaer
75b7d91abf
hekate: always init sublist on section creation
...
Even if there are no edge cases here
2022-05-21 13:08:46 +03:00
CTCaer
369df25cd3
nyx: fatfs: add failsafes for wrong mkfs usage
2022-05-19 15:17:54 +03:00
CTCaer
af22085172
nyx: move emuMMC backup folder to {emmc_sn}/emummc
2022-05-19 15:15:36 +03:00
CTCaer
38010ce65e
nyx: utilize ini free and fix various memleaks
...
With the new changes the heap and heap node usage drops 95% on boot. Subsequent accesses to Launch/More config keep the counter the same.
2022-05-19 15:14:05 +03:00
CTCaer
8428ce1a2e
hekate/nyx: gfx: changes to putn
2022-05-19 15:06:37 +03:00
CTCaer
bf00c79edb
bdk: ini: add ini free
...
Additionally, fix a bug where a list could not be initialized if section type is comment or caption.
2022-05-19 15:03:00 +03:00
CTCaer
429074293a
bdk: sprintf: no support for lower case hex and base that is not 10/16
2022-05-19 15:01:10 +03:00
CTCaer
2c768db542
bdk: heap: add nodes info
2022-05-19 14:53:02 +03:00
CTCaer
889317da58
bdk: sdmmc: add missing sd block size define
2022-05-16 13:34:36 +03:00
CTCaer
e09710e3eb
bdk: fatfs: mkfs alignment changes
...
- Default data alignment is now 1MB **when it's not set**
- Default volume alignment is now based on data alignment and not hardcoded to 16MB.
- Change max allowed alignment to 64MB.
The above changes allow selecting alignments for volume and data between 1MB and 64MB.
(From the previous 1 to 16MB for data and 16MB for volume).
2022-05-16 13:33:38 +03:00
CTCaer
fb45804adf
nyx: refactor various functions and add comments
...
Emphasis on partition manager deduplication and remove of some magic numbers.
2022-05-16 13:28:38 +03:00
CTCaer
796207a41b
nyx: do not allow joycon pairing info dump on Hoag
2022-05-16 13:12:45 +03:00
CTCaer
1649d446cd
nyx: options: set min year for clock offset to 2022
2022-05-16 13:12:11 +03:00
CTCaer
7459214fed
nyx: info: add mov r1 print for patched t210
2022-05-16 13:06:40 +03:00
CTCaer
e9587a325c
bdk: fuse: add ipatch support for T210B01
2022-05-16 13:05:12 +03:00