+ fusee-primary's panic display was updated to automatically identify and give suggestions to resolve many of the most common errors users encounter.
+ Having been tested as well as I can alone, `mesosphere` (atmosphère's reimplementation of the Nintendo Switch kernel) is now available for users interested in trying it.
+ Beginning in this release and until it is stable and well-tested, atmosphère will distribute two zips.
+ Users may detect whether mesosphere is active in system settings.
+ When mesosphere is active, the system version string will display "M.15.0" rather than "0.15.0", and so on for future releases.
+ Crash reports and the like will contain information on whether or not the user is using mesosphere, as well.
+ There are "probably" no material user-facing benefits to using mesosphere at this time.
+ Developers may be interested in the fact that mesosphere provides many newer SVC APIs even when on lower firmware versions.
+ The primary benefit to using mesosphere is that any issues you may encounter and report to me will be fixed.
+ All users who choose to opt in to using mesosphere have my deepest gratitude.
+ **Note:** If using hekate instead of fusee-primary, you will have to wait for the next hekate release for mesosphere to function, as hekate's support has not yet been included in an official release build.
+ This will be updated in the release notes when hekate provides a new release.
+ As mentioned in previous release notes, when mesosphere is stable and well-tested, it will be enabled by default and atmosphère's version will transition to 1.0.0.
+ Having been tested sufficiently over the last half-year, Atmosphere's NCM implementation is now opt-out, rather than opt in.
+ In the unlikely event that any issues are encountered, please report them to @SciresM.
+ Users interested in opting out of using our implementation should set `stratosphere!disable_ncm = 1` in BCT.ini.
+ The NCM implementation will stop being opt-out in a future update, probably around the same time that mesosphere becomes opt-out instead of opt-in.
+ Several bugs were fixed, including:
+ Loader now sets HBL's thread priority to a higher value when loading it in applet mode.
+ This fixes an extremely-slow launch ("hang") when using applet-HBL with certain games that do not suspend while inactive (e.g. Super Mario Sunshine).
+ set.mitm now caches user language configuration much more heavily.
+ This severely reduces lag in certain games which misuse the "nn::oe::GetDesiredLanguage()" API.
+ A bug was fixed that could cause erpt to fatal when loading an official save file that had error report attachments in it.
+ General system stability improvements to enhance the user's experience.
+ Several bugs were fixed involving the official jit sysmodule added in 10.0.0.
+ A Process handle leak was fixed when JitPlugin NRRs were registered with the `ro` sysmodule.
+ This prevented processes using jit from being able to exit, causing a full system freeze.
+ The `sm` atmosphere extension to not unregister services when the server's connection is closed was special-case disabled for `jit:u`.
+ This extension is normally desirable in order to allow more concurrent processes to exist (as only 0x40 sm connections may ever be concurrently open), but official jit sysmodule relies on the behavior.
+ This would cause crashes on attempts to launch a program using jit services more than once per reboot.
+ General system stability improvements to enhance the user's experience.
+ General system stability improvements to enhance the user's experience.
## 0.14.2
+ A bug was fixed that could cause a deadlock when installing mitm services.
+ Fixing this required a breaking change to the client behavior when installing a mitm service, and so custom sysmodules which use mitm will need to be re-compiled to function properly.
+ A bug was fixed that caused atmosphere sysmodules to respond incorrectly when receiving invalid messages.
+ A bug was fixed that caused fatal auto-reboot timing to work improperly.
+ Support was added to fusee for loading binaries for `mesosphere`, atmosphère's reimplementation of the Nintendo Switch kernel.
+ 0.14.2 does not include mesosphere, but those who are especially interested can build and test mesosphere themselves.
+ In the future, to enable a sufficient testing period Atmosphère releases will distribute two zips for some time.
+ One zip will use mesosphere, and the other will not.
+ This will allow users who are interested to opt-in to mesosphere usage before it has been tested to be stable.
+ When mesosphere is stable and well-tested, it will be enabled by default and Atmosphère's version will transition to 1.0.0.
+ General system stability improvements to enhance the user's experience.
+ An API (`ams:su`) was added to allow homebrew to safely install system upgrades or downgrades.
+ This is a re-implementation of the logic that `ns` uses to install gamecard system updates.
+ Nintendo (and now atmosphère) uses an installation process that can recover no matter where a failure occurs, which should significantly improve the safety of custom system update installation.
+ Support was added to `exosphère` for running on Mariko hardware.
+ **Please note**: Atmosphère still does not support Mariko, and should not be run on Mariko yet.
+ Certain stratosphere components do not handle mariko-specific logic fully correctly yet, and may initialize or interact with hardware incorrectly.
+ This will be fixed and support will be added over the remainder of the Summer.
+ A homebrew application (`daybreak`) was added that uses the system updater API (with thanks to @Adubbz for both design and implementation).
+ `daybreak` is included with atmosphère, and functions as a safer/more accurate equivalent to e.g. ChoiDujourNX.
+ Upgrades/downgrades can be installed from a folder containing the update NCAs on the SD card.
+ Because the update logic functions identically to Nintendo's, `daybreak` will be safe to use on Mariko when the rest of atmosphère has support.
+ **Please note**: Daybreak requires that meta (.cnmt) NCAs have the correct extension `.cnmt.nca`.
+ This is because gamecard system update logic uses extension to determine whether to mount the content.
+ [Several](https://gist.github.com/HookedBehemoth/df36b5970e1c5b1b512ec7bdd9043c6e) [scripts](https://gist.github.com/antiKk/279966c27fdfd9c7fe63b4ae410f89c4) have been made by community members to automatically rename folders with incorrect extensions.
+ A bug was fixed that would cause file-based emummc to throw an error (showing a hexdump) on boot.
+ Major thanks to @hexkyz for tracking down and resolving this.
+ A number of minor issues were resolved, including:
+ fusee now prints information to the screen when an error occurs, instead of getting stuck trying to initialize the display.
+ A race condition in Horizon was worked around that could prevent boot under certain circumstances.
+ A bug was fixed that would cause atmosphère modules to open ten copies of certain filesystems instead of one.
+ This could cause object exhaustion under certain circumstances.
+ For those interested in atmosphère's future development plans, the project's [roadmap](https://github.com/Atmosphere-NX/Atmosphere/blob/ac9832c5ce7be5832f6d29f6564a9c03e7efd22f/docs/roadmap.md) was updated.
+ General system stability improvements to enhance the user's experience.
+ `exosphère`, atmosphère's secure monitor re-implementation, was completely re-written.
+ `exosphère` was the first component authored for the project in early 2018. It is written in C, and in a style very different from the rest of atmosphère's code.
+ This has made the codebase difficult to maintain as time has gone on.
+ `exosphère` was also written to conform to constraints and assumptions that simply no longer apply when cfw is not launched from the web browser, and when warmboothax is possible.
+ Even beyond these issues, `exosphère` used all but 1KB of the 64KB of space available to it. This was a problem for a few reasons:
+ Each new system update added requires additional space to support (to add new keys and reflect various changes); 10.0.0 support used up 3 of the 4KB we had left.
+ atmosphère will want to have software support for mariko hardware, and this is not possible to fit in 1 KB.
+ The `exosphère` rewrite (which was codenamed `exosphère2` during development) solves these problems.
+ The new codebase is C++20 written in atmosphère's style.
+ This solves the maintainability problem, and should make understanding how the secure monitor works *much* easier for those interested in using the code as a reference implementation.
+ In addition, the new implementation currently uses ~59.5 of the 64KB available.
+ Several potential code changes are planned that can save/grant access to an additional ~2-3 KB if needed.
+ Unlike the first codebase, the new `exosphère` actually already has space allocated for future keys/etc. It is currently expected that the reserved space will never be required.
+ The previous implementation chose not to implement a number of "unimportant" secure monitor functions due to space concerns. The new code has enough breathing room that it can implement them without worries. :)
+ Finally, the groundwork for mariko support has been laid -- there are only a few minor changes needed for the new secure monitor implementation to work on both erista and mariko hardware.
+ **Please note**: `exosphère` is only one of many components, and many more need changes to support running on mariko hardware.
+ Software-side support for executing on mariko hardware is expected some time during Summer 2020, though it should also be noted that this is not a hard deadline.
+ **Please note**: The new `exosphère` binary is not abi-compatible with the old one. Users who boot using hekate should wait for it to update before running 0.13.0 (or boot fusee-primary via hekate).
+ atmosphère's api for target firmware was changed. All minor/micro system versions are now recognized, instead of only major versions.
+ This was required in order to support firmware version 5.1.0, which made breaking changes to certain IPC APIs that caused atmosphère 0.12.0 to abort.
+ **Please note**: this is (unavoidably) a breaking change. System modules using atmosphere-libs will need to update to understand what firmware version they are running.
+ For those interested in atmosphère's future development plans, the project's [roadmap](https://github.com/Atmosphere-NX/Atmosphere/blob/f68d33b70aed8954cc2c539e5934bcaf37ba51da/docs/roadmap.md) was updated.
+ General system stability improvements to enhance the user's experience.
+ Configuration for exosphere was moved to sd:/exosphere.ini.
+ This is to facilitate BIS protection changes described below.
+ Hopefully having this outside of the Atmosphere folder will prevent accidental deletion, since this now contains important settings.
+ Atmosphere's bis protection policy for the PRODINFO partition was substantially reworked.
+ Support was added for "automatically" performing a "blanking" operation to PRODINFO without actually modifying NAND.
+ This is equivalent to using the "incognito" homebrew tool, but NAND is never actually modified.
+ This can be turned on in sysmmc by setting `blank_prodinfo_sysmmc=1` in exosphere.ini, and in emummc by setting `blank_prodinfo_emummc=1` in exosphere.ini.
+ **Please note**: This is not known to be safe. There is a lack of research on whether the information blanked out is cached elsewhere in the system.
+ Usage of this option is not encouraged for this reason.
+ Support was added for writing to the PRODINFO partition, if a verified encrypted backup has been made.
+ PRODINFO is the only system data that cannot be recovered if not backed up, and thus Atmosphere has backed it up to the SD card on boot for some time now.
+ Users who wish to modify their calibration data may now do so unconditionally in emummc, and in sysmmc if `allow_writing_to_cal_sysmmc=1` is set in exosphere.ini.
+ **Please note**: This is heavily discouraged, and the typical user will almost never want to do this.
+ Setting this option will cause Atmosphere to attempt to verify (or create) an encrypted backup of the PRODINFO data to an unused region in the partition.
+ The backup is encrypted with per-console keys that Atmosphere's developers do not know.
+ If the backup is not verified or created, writes will not work. Users who have corrupted their PRODINFO in the past are encouraged to flash a good backup to allow use of this setting.
+ Reads and writes to the region used for the securely encrypted backup will appear to succeed, but will actually read/write from a buffer filled with garbage in memory.
+ Support will be investigated in the future for supporting booting with fully blanked calibration.
+ This is desirable to allow boot to succeed for users who lost their calibration data due to bricking homebrew before bis protection was implemented.
+ `creport` has been updated to use the new screenshot APIs added in 9.0.0+.
+ On 10.0.0+, if a crash occurs in an application (not applet or sysmodule) a screenshot will now be automatically saved to the SD card.
+ If the user applies a patch to vi on 9.0.0 (as the command this uses was previously for dev-units only), this can also work on 9.0.0.
+ The new sysmodule `pgl` added in 10.0.0 was reimplemented.
+ `pgl` ("Program Launcher", probably) is responsible for managing launched user-processes, previously this was handled by NS.
+ The most exciting thing about pgl is that it finally provides an API for multiple clients to subscribe to process events.
+ Using these new APIs, system modules / other homebrew can subscribe to be notified whenever a process event occurs.
+ This means action can be taken on process launch, process exit, process crash, etc.
+ A slight concern with Nintendo's implementation is that each subscriber object uses 0x448 bytes of memory, and N only reserves 8KB for all allocations in pgl.
+ Atmosphere's implementation uses a 32KB heap, which should not be exhaustible.
+ Atmosphere's implementation has a total memory footprint roughly 0x28000 bytes smaller than Nintendo's.
+ `dmnt`'s Cheat VM was extended to add three new opcodes.
+ The first new opcode, "ReadWriteStaticRegister", allows for cheats to read from a bank of 128 read-only static registers, and write to a bank of 128 write-only static registers.
+ This can be used in concert with new IPC commands that allow a cheat manager to read or write the value of these static registers to have "dynamic" cheats.
+ As an example, a cheat manager could write a value to a static register that a cheat to control how many of an item to give in a game.
+ As another example, a cheat manager could read a static register that a cheat writes to to learn how many items a player has.
+ The second and third opcodes are a pair, "PauseProcess" and "ResumeProcess".
+ Executing pause process in a cheat will pause the game (it will be frozen) until a resume process opcode is used.
+ These are also available over IPC, for cheat managers or system modules that want to pause or resume the attached cheat process.
+ This allows a cheat to know that the game won't modify or access data the cheat is accessing.
+ For example, this can be used to prevent Pokemon from seeing a pokemon a cheat is in the middle of injecting and turning it into a bad egg.
+ A bug was fixed that could cause owls to flicker under certain circumstances.
+ For those interested in technical details, in 10.0.0 kernelldr/kernel no longer set cpuactlr_el1, assuming that it was set correctly by the secure monitor.
+ However, exosphere did not set cpuactlr_el1. This meant that the register held the reset value going into boot.
+ This caused a variety of highly erratic symptoms, including causing basically any game to crash seemingly randomly.
+ A number of other major inaccuracies in exosphere were corrected.
+ General system stability improvements to enhance the user's experience.
+ A reimplementation of the `erpt` (error reports) system module was added.
+ In previous versions of Atmosphere, a majority of error reports were prevented via a combination of custom creport, fatal, and stubbed eclct.
+ However, error reports were still generated via some system actions.
+ Most notably, any time the error applet appeared, an error report was generated.
+ By default, atmosphere disabled the *uploading* of error reports, but going online in OFW after an error report occurred in Atmosphere could lead to undesirable telemetry.
+ Atmosphere's `erpt` reimplementation allows the system to interact with existing error reports as expected.
+ However, all new error reports are instead saved to the sd card (`/atmosphere/erpt_reports`), and are not committed to the system savegame.
+ Users curious about what kind of telemetry is being prevented can view the reports as they're generated in there.
+ Reports are saved as msgpack (as this is what Nintendo uses).
+ Please note, not all telemetry is disabled. Play reports and System reports will continue to function unmodified.
+ With atmosphere's `erpt` implementation, homebrew can now use the native error applet to display errors without worrying about generating undesirable telemetry.
+ Changes were made to the way fs.mitm builds images when providing a layeredfs romfs.
+ Building romfs metadata previously had a memory cost of about ~4-5x the file table size.
+ This caused games that have particularly enormous file metadata tables (> 4 MB) to exhaust fs.mitm's 16 MB memory pool.
+ The code that creates romfs images was thus changed to be significantly more memory efficient, again.
+ Memory requirements have been lowered from ~4x file table size to ~2x file table size + 0.5 MB.
+ There is a slight speed penalty to this, but testing on Football Manager 2020 only took an extra ~1.5 seconds for the game to boot with many modded files.
+ This shouldn't be noticeable thanks to the async changes made in 0.10.2.
+ If you encounter a game that exhausts ams.mitm's memory (crashing it) when loading layeredfs mods, please contact SciresM.
+ Romfs building can be made even more memory efficient, but unless games show up with even more absurdly huge file tables it seems not worth the speed trade-off.
+ A bug was fixed that caused Atmosphere's fatal error context to not dump TLS for certain processes.
+ General system stability improvements to enhance the user's experience.
+ Up to eight specific program ids can now be specified to have their own override keys.
+ This allows designating both the album applet and a specific game as hbl by default as desired.
+ Configuration targeting a specific program is now mutually exclusive with override-any-app for that program.
+ This fixes unintuitive behavior when override key differed for an application specific program.
+ Loader's external content fileystem support was fixed (thanks @misson20000!).
+ KernelLdr was reimplemented.
+ This is the first step towards developing mesosphere, Atmosphere's planned reimplementation of the Switch's Kernel.
+ The typical user won't notice anything different, as there are no extensions, but a lot of groundwork was laid for future development.
+ Improvements were made to the way Atmosphere's buildsystem detects source code files.
+ This significantly reduces compilation time (saving >30 seconds) on the machine that builds official releases.
+ Certain device code was cleaned up and made more correct in fusee/sept/exosphere (thanks @hexkyz!).
+ A number of changes were made to the way fs.mitm builds images when providing a layeredfs romfs.
+ Some games (Resident Evil 6, Football Manager 2020 Touch, possibly others) have enormous numbers of files.
+ Attempting to create a layeredfs mod for these games actually caused fs.mitm to run out of memory, causing a fatal error.
+ The code that creates these images was changed to be significantly more memory efficient.
+ However, these changes also cause a significant slowdown in the romfs building code (~2-5x).
+ This introduced a noticeable stutter when launching a game, because the UI thread would block on the romfs creation.
+ To solve this, fs.mitm now lazily initializes the image in a background thread.
+ This fixes stutter issues, however some games may be slightly slower (~1-2s in the worst cases) to transition from the "loading" GIF to gameplay now.
+ Please note: the slowdown is not noticeable in the common case where games don't have tons of files (typical is ~0.1-0.2 seconds).
+ Once the image has been built, there is no further speed penalty at runtime -- only when the game is launched.
+ A number of other bugs were fixed, including:
+ Several minor logic inversions that could have caused fatal errors when modding games.
+ Atmosphere's new-ipc code did not handle "automatic" recvlist buffers correctly, so some non-libnx homebrew could crash.
+ fs.mitm now correctly mitms sdb, which makes redirection of certain system data archives work again.
+ In 0.10.0/0.10.1, changing the system font/language did not work correctly due to this.
+ A bug was fixed in process cleanup that caused the system to hang on <5.0.0.
+ The temporary hid-mitm added in Atmosphere 0.9.0 was disabled by default.
+ Please ensure your homebrew is updated.
+ For now, users may re-enable this mitm by use of a custom setting (`atmosphere!enable_deprecated_hid_mitm`) to ease the transition process some.
+ Please note: support for this setting may be removed to save memory in a future atmosphere release.
+ General system stability improvements to enhance the user's experience.
+ A bug was fixed that caused memory reallocation to the system pool to work improperly on firmware 5.0.0 and above.
+ Atmosphere was always trying to deallocate memory away from the applet pool and towards the system pool.
+ The intent of this is to facilitate running more custom sysmodules/atmosphere binaries.
+ However, while memory was always successfully taken away from the applet pool, on 5.0.0+ granting it to the system pool did not work for technical reasons.
+ If you are interested in the technical details, talk to SciresM.
+ This has now been fixed by adding new kernel patches, and memory is correctly granted to the system pool as intended.
+ Atmosphere's library system has been overhauled:
+ libstratosphere's repository has been rebranded, more generally, to "Atmosphere-libs".
+ In addition to libstratosphere, a new general library for not-stratosphere-specific code has been added.
+ This is currently named `libvapours`.
+ In the future, kernel functionality will be available as `libmesosphere`.
+ The build system for stratosphere system modules has been similarly overhauled.
+ A number of other bugs were fixed, including:
+ A bug was fixed that could cause memory corruption when redirecting certain Romfs content.
+ A bug was fixed that could cause an infinite loop when redirecting certain Romfs content.
+ A bug was fixed that could cause certain NROs to fail to load.
+ This caused the latest version of Super Smash Bros to display "An error has occurred" on launch.
+ A bug was fixed that caused input/output array sizes for certain circumstances to be calculated incorrectly.
+ This caused cheats to fail to function properly.
+ C++ exception code is now more thoroughly removed from stratosphere executables.
+ This saves a minor amount of memory.
+ A number of minor logic inversions were fixed in libstratosphere.
+ These did not affect any code currently used by released Atmosphere binaries.
+ *Please note**: Because this update is releasing so soon after 0.10.0, the removal of the temporary hid-mitm has been postponed to 0.10.2.
+ Please ensure your homebrew is updated.
+ Random number generation now uses TinyMT instead of XorShift.
+ General system stability improvements to enhance the user's experience.
+ **Please note**: 9.0.0 made a number of changes that may cause some issues with homebrew. Details:
+ 9.0.0 changed HID in a way that causes libnx to be unable to detect button input.
+ Homebrew should be recompiled with newest libnx to fix this.
+ Atmosphere now provides a temporary hid-mitm that will cause homebrew to continue to work as expected.
+ This mitm will be removed in a future Atmosphere revision once homebrew has been updated, to allow users to use a custom hid mitm again if they desire.
+ 9.0.0 introduced an dependency in FS on the USB system module in order to launch the SD card.
+ This means the USB system module must now be launched before the SD card is initialized.
+ Correspondingly, the USB system module can no longer be IPS patched, and its settings cannot be reliably mitm'd.
+ We know this is frustrating, so we'll be looking into whether there is some way of addressing this in the future.
+ An off-by-one error was fixed in `boot` system module's pinmux initialization.
+ This could theoretically have caused issues with HdmiCec communication.
+ No users reported issues, so it's unclear if this was a problem in practice.
+ A bug was fixed that could cause webapplet launching homebrew to improperly set the accessible url whitelist.
+ BIS key generation has been fixed for newer hardware.
+ Newer hardware uses new, per-firmware device key to generate BIS keys instead of the first device key, so previously the wrong keys were generated as backup.
+ This only affects units manufactured after ~5.0.0.
+ General system stability improvements to enhance the user's experience.
+ A number of emummc bugfixes were added (all thanks to @m4xw's hard work). The following is a summary of emummc changes:
+ Support for file-based emummc instances was fixed.
+ Please note: file-based emummc is still unoptimized, and so may be much slower than partition-based.
+ This speed differential should hopefully be made better in a future emummc update.
+ The way emummc handles power management was completely overhauled.
+ Emummc now properly handles init/de-init, and now supports low voltage mode.
+ Much better support for shutdown was added, which should assuage corruption/synchronization problems.
+ This should also improve support for more types of SD cards.
+ A bug was fixed that caused emummc to not work on lower system versions due to missing SVC access.
+ **Please note**: The configuration entries used for emummc have been changed.
+ `emummc_` prefixes have been removed, since they are superfluous given the `emummc` category they are under.
+ As an example, `emummc!emummc_enabled` is now `emummc!enabled`.
+ INI configurations made by @CTCaer's [tool](https://github.com/ctcaer/hekate/releases/latest) (which is the recommended way to manage emummc) should automatically work as expected/be corrected.
+ **If you do not wish to use the above, you will need to manually correct your configuration file**.
+ General system stability improvements to enhance the user's experience.
+ Stratosphere is currently in the process of being re-written/refactored.
+ Stratosphere was my (SciresM's) first C++ project, ever -- the code written for it a year ago when I was learning C++ is/was of much lower quality than code written more recently.
+ Code is thus being re-rwitten for clarity/stlye/to de-duplicate functionality, with much being moved into libstratosphere.
+ Stratosphere will, after the rewrite, globally use the `sts::` namespace -- this should greatly enhancing libstratosphere's ability to provide functionality for system modules.
+ The rewritten modules consistently have lower memory footprints, and should be easier to maintain going forwards.
+ The `sm`, `boot`, `spl`, `ro`, and `loader` modules have been tackled so far.
+ General system stability improvements to enhance the user's experience.
+ Please note, emummc is still considered **beta/experimental** -- this is not the inevitable bugfix update for it, although some number of bugs have been fixed. :)
+ General system stability improvements to enhance the user's experience.
+ Thread names are now dumped on crash in addition to 0x100 of TLS from each thread.
+ This significantly aids debugging efforts for crashes.
+ Support was added for 32-bit stackframes, so reports can now be generated for 32-bit games.
+ `dmnt`'s Cheat VM was extended to add a new debug opcode.
+ With thanks to/collaboration with @m4xw and @CTCaer, support was added for redirecting NAND to the SD card (emummc).
+ Please note, this support is very much **beta/experimental**.
+ It is quite likely we have not identified all bugs -- those will be fixed as they are reported over the next few days/weeks.
+ In addition, some niceties (e.g. having a separate Atmosphere folder per emummc instance) still need some thought put in before they can be implemented in a way that makes everyone happy.
+ If you are not an advanced user, you may wish to think about waiting for the inevitable 0.9.1 bugfix update before using emummc as your default boot option.
+ You may especially wish to consider waiting if you are using Atmosphere on a unit with the RCM bug patched.
+ Emummc is managed by editing the emummc section of "emummc/emummc.ini".
+ To enable emummc, set `emummc!emummc_enabled` = 1.
+ Support is included for redirecting NAND to a partition on the SD card.
+ This can be done by setting `emummc!emummc_sector` to the start sector of your partition (e.g., `emummc_sector = 0x1A010000`).
+ Support is also included for redirecting NAND to a collection of loose files on the SD card.
+ This can be done by setting `emummc!emummc_path` to the folder (with archive bit set) containing the NAND boot partitions' files "boot0" and "boot1", and the raw NAND image files "00", "01", "02", etc. (single "00" file with the whole NAND image requires exFAT mode while multipart NAND can be used in both exFAT and FAT32 modes).
+ A data abort was fixed when mounting certain partitions on NAND.
+ All Stratosphère system modules now only maintain a connection to `sm` when actively using it.
+ This helps mitigate the scenario where sm hits the limit of 64 active connections and crashes.
+ This sometimes caused crashes when custom non-Atmosphère sysmodules were active and the user played certain games (ex: Smash's Stage Builder).
+ fatal now uses the 8.0.0 clkrst API, instead of silently failing to adjust clock rates on that firmware version.
+ A wait loop is now performed when trying to get a session to `sm`, in the case where `sm:` is not yet registered.
+ This fixes a race condition that could cause a failure to boot under certain circumstances.
+ libstratosphere's handling of domain object closing has been improved.
+ Previously, this code could cause crashes/extremely odd behavior (misinterpreting what object a service is) under certain circumstances.
+ An optional automatic reboot timer was added to fatal.
+ By setting the system setting `atmosphere!fatal_auto_reboot_interval` to a non-zero u64 value, fatal can be made to automatically reboot after a certain number of milliseconds.
+ If the setting is zero or not present, fatal will wait for user input as usual.
+ Atmosphère now provides a reimplementation of the `ro` system module.
+ `ro` is responsible for loading dynamic libraries (NROs) on 3.0.0+.
+ On 1.0.0-2.3.0, this is handled by `loader`.
+ Atmosphere's `ro` provides this functionality (`ldr:ro`, `ro:dmnt`) on all firmware versions.
+ An extension was implemented to provide support for applying IPS patches to NROs.
+ All patches at paths like /atmosphere/nro_patches/<user-definedpatchname>/<HexBuild-IDforNROtopatch>.ips will be applied, allowing for easy distribution of patches.
+ Both the IPS and IPS32 formats are supported.
+ Atmosphère now provides a reimplementation of the `spl` system module.
+ `spl` (Secure Platform Services) is responsible for cryptographic operations, including all communications with the secure monitor (exosphère).
+ In the future, this may be used to provide extensions to the API for interacting with exosphère from userland.
+ General system stability improvements to enhance the user's experience.
+ A few bugs were fixed that could cause fatal to fail to show an error under certain circumstances.
+ A bug was fixed that caused an error when launching certain games (e.g. Hellblade: Senua's Sacrifice).
+ Loader had support added in ams-0.8.4 for a new (7.0.0+) flag bit in NPDMs during process creation, but forgot to allow this bit to be set when validating the NPDM.
+ dmnt's cheat virtual machine received new instructions.
+ These allow for saving, restoring, or clearing registers to a secondary bank, effectively doubling the number of values that can be stored.
+ SHA256 code has been swapped from linux code to libnx's new hw-accelerated cryptography API.
+ Extensions were added to smcGetInfo:
+ A ConfigItem was added to detect whether the current unit has the RCM bug patched.
+ A ConfigItem was added to retrieve the current Atmosphère build hash.
+ Exosphère now tells the kernel to enable user-mode exception handlers, which should allow for better crash reporting/detection from Atmosphère's modules in the future..
+ Opt-in support was added for redirecting game save files to directories on the SD card.
+ Please note, this feature is **experimental**, and may cause problems. Please use at your own risk (and back up your saves before enabling it), as it still needs testing.
+ This can be enabled by setting `atmosphere!fsmitm_redirect_saves_to_sd` to 1 in `system_settings.ini`.
+ General system stability improvements to enhance the user's experience.
+ A case of inverted logic was fixed in fs.mitm which prevented the flags system from working correctly.
+ Time service access was corrected in both creport/fatal.
+ This fixes the timestamps used in fatal/crash report filenames.
+ A coherency issue was fixed in exosphère's Security Engine driver.
+ This fixes some instability issues encountered when overclocking the CPU.
+ Loader now unmaps NROs correctly, when ldr:ro is used.
+ This fixes a crash when repeatedly launching the web applet on <3.0.0.
+ Usage of hidKeysDown was corrected to hidKeysHeld in several modules.
+ This fixes a rare issue where keypresses may have been incorrectly detected.
+ An issue with code filesystem unmounting was fixed in loader.
+ This issue could occasionally cause a fatal error 0x1015 to be thrown on boot.
+ Two bugs were fixed in the implementations of dmnt's cheat virtual machine.
+ These could cause cheats to work incorrectly under certain circumstances.
+ PM now uses a static buffer instead of a dynamically allocated one during process launch.
+ This fixes a memory exhaustion problem when building with gcc 8.3.0.
+ A workaround for a deadlock bug in Horizon's kernel on >= 6.0.0 was added in dmnt.
+ This prevents a system hang when booting certain titles with cheats enabled (ex: Mario Kart 8 Deluxe).
+ set.mitm now reads the system firmware version directly from the system version archive, instead of calling into set:sys.
+ This fixes compatibility with 1.0.0, which now successfully boots again.
+ dmnt's cheat virtual machine had some instruction set changes.
+ A new opcode was added for beginning conditional blocks based on register contents.
+ More addressing modes were added to the StoreRegisterToAddress opcode.
+ These should allow for more complex cheats to be implemented.
+ A new system for saving the state of cheat toggles between game boots was added.
+ Toggles are now saved to `atmosphere/titles/<title id>/cheats/toggles.txt` when either toggles were successfully loaded from that file or the system setting `atmosphere!dmnt_always_save_cheat_toggles` is non-zero.
+ This removes the need for manually setting cheats from all-on or all-off to the desired state on each game boot.
+ The default behavior for loader's HBL support was changed.
+ Instead of launching HBL when album is launched without R held, loader now launches HBL when album or any game is launched with R held.
+ Loader will now override any app in addition to a specific title id when `hbl_config!override_any_app` is true in `loader.ini`.
+ Accordingly, the `hbl_config!title_id=app` setting was deprecated. Support will be removed in Atmosphère 0.9.0.
+ First-class support was added to loader and fs.mitm for enabling homebrew to launch web applets.
+ Loader will now cause the "HtmlDocument" NCA path to resolve for whatever title HBL is taking over, even if it would not normally do so.
+ fs.mitm will also now cause requests to mount the HtmlDocument content for HBL's title to open the `sdmc:/atmosphere/hbl_html` folder.
+ By default, this just contains a URL whitelist.
+ General system stability improvements to enhance the user's experience.
+ Support was added for overriding content on a per-title basis, separate from HBL override.
+ This allows for using mods on the same title that one uses to launch HBL.
+ By default, `!L` is used for title content override (this is configurable by editing `default_config!override_key` in `loader.ini`)
+ This key combination can be set on a per-title basis by creating a `atmosphere/titles/<title id>/config.ini`, and editing `override_config!override_key`.
+ Content headers were added for the embedded files inside of fusee-secondary.
+ This will allow non-fusee bootloaders (like `hekate`) to extract the components bundled inside release binaries.
+ This should greatly simplify the update process in the future, for users who do not launch Atmosphère using fusee.
+ Support for cheat codes was added.
+ These are handled by a new `dmnt` sysmodule, which will also reimplement Nintendo's Debug Monitor in the future.
+ For details, please see the [cheat loading documentation](https://github.com/Atmosphere-NX/Atmosphere/blob/master/docs/cheats.md#cheat-loating-process).
+ Cheat codes are fully backwards compatible with the pre-existing format, although a number of bugs have been fixed and some new features have been added.
+ For details, please see [the compatibility documentation](https://github.com/Atmosphere-NX/Atmosphere/blob/master/docs/cheats.md#cheat-code-compatibility).
+ An HIPC service API was added (`dmnt:cht`), that will allow user homebrew to interface with and control Atmosphère's cheat manager.
+ Please see [the relevant documentation](https://github.com/Atmosphere-NX/Atmosphere/blob/master/docs/modules/dmnt.md).
+ Full client code can be found in [libstratosphere](https://github.com/Atmosphere-NX/libstratosphere/blob/master/include/stratosphere/services/dmntcht.h).
+ Users interested in interfacing should see [EdiZon](https://github.com/WerWolv/EdiZon), which should have support for interfacing with Atmosphère's API shortly after 0.8.5 releases.
+ A bug was fixed that would cause Atmosphère's fatal screen to not show on 1.0.0-2.3.0.
+ A custom warmboot firmware was implemented, which does not perform anti-downgrade fuse checks.
+ This fixes sleep mode when using a downgraded NAND.
+ This also removes Atmosphère's final dependency on Nintendo's encrypted PK11 binary; all components are now re-implemented.
+ The ExternalContentSource API was changed to not clear on failure.
+ Content override now supports an "app" setting, that causes all applications to be overridden with HBL instead of a specific title.
+ Note: because override keys are system-wide, using this setting will prevent using mods in games (as every game will be HBL).
+ A bug was fixed causing incorrect fatal-error output when svcBreak was called on 5.0.0+.
+ An extension was added to set.mitm to support customization of system settings.
+ These are controlled by `atmosphere/system_settings.ini`, see [here](https://github.com/Atmosphere-NX/Atmosphere/blob/master/docs/modules/set_mitm.md) for documentation.
+ A bug was fixed in the MitM API that could sometimes cause a system hang during boot.
+ A change was made to the MitM API: in cases where sm would have returned 0xE15 when installing a mitm service, it now defers the result (following GetService semantics).
+ Support for booting into maintenance mode by holding +/- was added to PM.
+ An extension was added to exosphere, adding a custom SMC that allows for DMA to IRAM.
+ In addition, smcGetConfig was extended to reboot to a payload in IRAM at 0x40010000 when ConfigItem 65001 is set to 2.
+ Fatal will now use this to reboot to sdmc:/atmosphere/reboot_payload.bin if present, when a vol button is pressed.
+ An example homebrew ("reboot_to_payload") was also written and is now included with Atmosphère.
+ General system stability improvements to enhance the user's experience.
+ DRAM training was added to fusee-secondary, courtesy @hexkyz.
+ This greatly improves the speed of memory accesses during boot, resulting in a boot time that is ~200-400% faster.
+ creport has had its code region detection improved.
+ Instead of only checking one of the crashing thread's PC/LR for code region presence, creport now checks both + every address in the stacktrace. This is also now done for every thread.
+ This matches the improvement Nintendo added to official creport in 6.1.0.
+ The code region detection heuristic was further improved by checking whether an address points to .rodata or .rwdata, instead of just .text.
+ This means that a crash appears in a loaded NRO (or otherwise discontiguous) code region, creport will be able to detect all active code regions, and not just that one.
+ [libstratosphere](https://github.com/Atmosphere-NX/libstratosphere) has been completely refactored/rewritten, and split into its own, separate submodule.
+ While this is mostly "under the hood" for end-users, the refactor is faster (improving both boot-time and runtime performance), more accurate (many of the internal IPC structures are now bug-for-bug compatible with Nintendo's implementations), and significantly more stable (it fixes a large number of bugs present in the old library).
+ The refactored API is significantly cleaner and easier to write system module code for, which should improve/speed up development of stratosphere.
+ Developers looking to write their own custom system modules for the Switch can now easily include libstratosphere as a submodule in their projects.
+ Loader was extended to add a new generic way to redirect content (ExternalContentSources), courtesy @misson20000:
+ A new command was added to ldr:shel, taking in a tid to redirect and returning a session handle.
+ When the requested TID is loading, Loader will query the handle as though it were an IFileSystem.
+ This allows clients to generically define their own filesystems, and override content with them in loader.
+ fs.mitm has gotten several optimizations that should improve its performance and stability:
+ RomFS redirection now only occurs when there is content to redirect, even if the title is being mitm'd elsewhere.
+ A cache is now maintained of the active data storage, if any, for all opened title IDs. This means if two processes both try to open the same archive, fs.mitm won't duplicate any of its work.
+ RomFS metadata is now cached to the SD card on build instead of being persisted in memory -- this greatly reduces memory footprint and allows fs.mitm to redirect more titles simultaneously than before.
+ A number of bugs were fixed, including:
+ A resource leak was fixed in process creation. This fixes crashes that occur when a large number (>32) games have been launched since the last reboot.
+ fs.mitm no longer errors when receiving a zero-sized buffer. This fixes crashes in some games, including The Messenger.
+ Multi-threaded server semantics should no longer cause deadlocks in certain circumstances. This fixes crashes in some games, including NES Classics.
+ PM now only gives full FS permissions to the active KIPs. This fixes a potential crash where new processes might be unable to be registered with FS.
+ The `make dist` target now includes the branch in the generated zip name.
+ General system stability improvements to enhance the user's experience.
+ Fixed a bug preventing consoles on 4.0.0-4.1.0 from going to sleep and waking back up.
+ Fixed a bug preventing consoles on <4.0.0frombootingwithoutspecificKIPsontheSDcard.
+ An API was added to Atmosphère's Service Manager for deferring acquisition of all handles for specific services until after early initialization is completed.
+ General system stability improvements to enhance the user's experience.
+ Supports loading/customizing of arbitrary KIPs from the SD card.
+ Supports loading a custom kernel from the SD card ("/atmosphere/kernel.bin").
+ Supports compile-time defined kernel patches on a per-firmware basis.
+ All patches at paths like /atmosphere/kip_patches/<user-definedpatchname>/<SHA256ofKIP>.ips will be applied to the relevant KIPs, allowing for easy distribution of patches supporting multiple versions.
+ Both the IPS and IPS32 formats are supported.
+ All patches at paths like /atmosphere/kernel_patches/<user-definedpatchname>/<SHA256ofKernel>.ips will be applied to the kernel, allowing for easy distribution of patches supporting multiple versions.
+ Both the IPS and IPS32 formats are supported.
+ Configurable by editing BCT.ini on the SD card.
+ Atmosphère should also be launchable by the alternative hekate bootloader, for those who prefer it.
+ Exosphère, a fully-featured custom secure monitor.
+ Exosphere is a re-implementation of Nintendo's TrustZone firmware, fully replicating all of its features.
+ In addition, it has been extended to provide information on current Atmosphere API version, for homebrew wishing to make use of it.
+ Stratosphère, a set of custom system modules. This includes:
+ A loader system module.
+ Reimplementation of Nintendo's loader, fully replicating all original functionality.
+ Configurable by editing /atmosphere/loader.ini
+ First class support for the Homebrew Loader.
+ An exefs NSP (default "/atmosphere/hbl.nsp") will be used in place of the victim title's exefs.
+ By default, HBL will replace the album applet, but any application should also be supported.
+ Extended to support arbitrary redirection of executable content to the SD card.
+ Files will be preferentially loaded from /atmosphere/titles/<titleid>/exefs/, if present.
+ Files present in the original exefs a user wants to mark as not present may be "stubbed" by creating a .stub file on the SD.
+ If present, a PFS0 at /atmosphere/titles/<titleid>/exefs.nsp will fully replace the original exefs.
+ Redirection is optionally toggleable by holding down certain buttons (by default, holding R disables redirection).
+ Full support for patching NSO content is implemented.
+ All patches at paths like /atmosphere/exefs_patches/<user-definedpatchname>/<HexBuild-IDforNSOtopatch>.ips will be applied, allowing for easy distribution of patches supporting multiple firmware versions and/or titles.
+ Both the IPS and IPS32 formats are supported.
+ Extended to support launching content from loose executable files on the SD card, without requiring any official installation.
+ This is done by specifying FsStorageId_None on launch.
+ A service manager system module.
+ Reimplementation of Nintendo's service manager, fully replicating all original functionality.
+ Compile-time support for reintroduction of "smhax", allowing clients to optionally skip service access verification by skipping initialization.
+ Extended to allow homebrew to acquire more handles to privileged services than Nintendo natively allows.
+ Extended to add a new API for installing Man-In-The-Middle listeners for arbitrary services.
+ API can additionally be used to safely detect whether a service has been registered in a non-blocking way with no side-effects.
+ Full API documentation to come.
+ A process manager system module.
+ Reimplementation of Nintendo's process manager, fully replicating all original functionality.
+ Extended to allow homebrew to acquire handles to arbitrary processes, and thus read/modify system memory without blocking execution.
+ Extended to allow homebrew to retrieve information about system resource limits.
+ Extended by embedding a full, extended implementation of Nintendo's boot2 system module.
+ Title launch order has been optimized in order to grant access to the SD card faster.
+ The error-collection system module is intentionally not launched, preventing many system telemetry error reports from being generated at all.
+ Users may place their own custom sysmodules on the SD card and flag them for automatic boot2 launch by creating a /atmosphere/titles/<titleID>/boot2.flag file on their SD card.
+ A custom fs.mitm system module.
+ Uses Atmosphère's MitM API in order to provide an easy means for users to modify game content.
+ Intercepts all FS commands sent by games, with special handling for commands used to mount RomFS/DLC content to enable easy creation and distribution of game/DLC mods.
+ fs.mitm will parse the base RomFS image for a game, a RomFS image located at /atmosphere/titles/<titleID>/romfs.bin, and all loose files in /atmosphere/titles/<titleID>/romfs/, and merge them together into a single RomFS image.
+ When merging, loose files are preferred to content in the SD card romfs.bin image, and files from the SD card image are preferred to those in the base image.
+ Can additionally be used to intercept commands sent by arbitrary system titles (excepting those launched before SD card is active), by creating a /atmosphere/titles/<titleID>/fsmitm.flag file on the SD card.
+ Can be forcibly disabled for any title, by creating a /atmosphere/titles/<titleID>/fsmitm_disable.flag file on the SD card.
+ Redirection is optionally toggleable by holding down certain buttons (by default, holding R disables redirection).
+ A custom crash report system module.
+ Serves as a drop-in replacement for Nintendo's own creport system module.
+ Generates detailed, human-readable reports on system crashes, saving to /atmosphere/crash_reports/<timestamp>_<titleID>.log.
+ Because reports are not sent to the erpt sysmodule, this disables all crash report related telemetry.
+ General system stability improvements to enhance the user's experience.
