mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-22 18:06:40 +00:00
Code Issues Releases Activity
1631 commits 2 branches 75 tags 6.7 MiB
Commit graph

442 commits

Author SHA1 Message Date
CTCaer
7f32c6d211 bdk: sd: better removal detection handling 2023-03-31 08:31:20 +03:00
CTCaer
2f7e841b50 bdk: sdmmc: move sdr12 setup for better readability 2023-03-31 08:29:20 +03:00
CTCaer
29e32f09fb bdk: sdmmc: properly identify sdmmc1 clk config 
Remove schmitt trigger config from clock pin on sdmmc1 for identifying previous pinmuxing state.
 2023-03-31 08:27:48 +03:00
CTCaer
b123571c56 bdk: sdmmc: only allow power raise if SDR50 and up 
As per spec.
 2023-03-31 08:26:19 +03:00
CTCaer
b7164a629f bdk: sdmmc: allow max power limit to be set 
Even if it defaults to 1.44W.
Some cards' firmware maybe be bugged.

The 3.3V regulator on all SKUs allow more than 800mA current anyway.
 2023-03-31 08:24:52 +03:00
CTCaer
25be98b7e3 bdk: sdmmc: add UHS DDR50 support 
But disable it by default in the auto selection.
 2023-03-31 08:23:10 +03:00
CTCaer
76a5facbc3 bdk: clock: rename clock_t to clk_rst_t 
To avoid redefines when standard math header is used.
 2023-03-31 08:18:45 +03:00
CTCaer
502fc1ed50 bdk: sdmmc: rename ddr100 to the actual HS100 name 2023-03-31 08:15:40 +03:00
CTCaer
5e134ed54b bdk: sdmmc: refactor defines 2023-03-31 08:00:14 +03:00
CTCaer
4cfe5f241e bdk: sdmmc: remove eMMC OC 
Additionally, the flag BDK_SDMMC_OC_AND_EXTRA_PRINT is now just BDK_SDMMC_EXTRA_PRINT
 2023-03-31 07:55:17 +03:00
CTCaer
9a222e0e49 bdk: sdmmc: rename divisor param to card clock 2023-03-31 07:53:46 +03:00
CTCaer
298893f404 bdk: sdmmc: remove powersave arg from sdmmc init 2023-03-31 07:51:43 +03:00
CTCaer
1ce5bb10f8 bdk: sdmmc: refactor debug prints 2023-03-31 07:49:26 +03:00
CTCaer
107fbd1d24 bdk: gpio: add debounce set function 
The debounce time is not per pin but per bank. So software should manage proper time for sibling pins
 2023-03-31 07:43:16 +03:00
CTCaer
1edb6583ac bdk: gpio: reorder gpio config 
Since there are some bootloaders that mess with the states of some power gpios, reorder gpio configuration for input/output in order to prevent power pin glitches.
 2023-03-31 07:41:50 +03:00
CTCaer
d286ee4e9d bdk: sd: only clear inserted when requested 
Also rename var to further explain its usage
 2023-02-23 01:25:05 +02:00
CTCaer
17cdd5af0d bdk: hwdeinit: restore order of bpmp clock set 
Restore order of bpmp clock scale down in deinit, in order to decrease pressure on clock deinits.
 2023-02-22 14:48:43 +02:00
CTCaer
55e01ca735 bdk: sd: improve init error handling 
- Management of sd init done is now on sd init retry function
 Also manages inserted, since it can set the sd init done to false if failed
- Init will now always check if SD is also initialized, since it doesn't manage it anymore. Because of that, mounting is no longer forced, but checked first.
- Unmount/End will now always set the sd as unmounted, since no data residue is expected after the fact

The above will improve handling of faulty SD cards or faulty SD readers.
 2023-02-22 13:19:12 +02:00
CTCaer
c279fa2521 bdk: max77621: ckkadv is basically an enum 2023-02-22 13:00:36 +02:00
CTCaer
9a98c1afb9 bdk: stylistic corrections 
And update copyrights
 2023-02-11 23:46:38 +02:00
CTCaer
72abe60a3b bdk: hw init: remove support for broken hwinits 
It's 2023 already.
 2023-02-11 23:19:56 +02:00
CTCaer
ee682fdf24 bdk: l4t: minerva: don't rely on UB 2023-02-11 23:17:27 +02:00
CTCaer
42859a2373 bdk: usb: ums: print errors when sdmmc init fails 2023-02-11 23:16:37 +02:00
CTCaer
22bdd0e0ff bdk: sdmmc: remove unused power limits 
Also name some magic numbers
 2023-02-11 23:15:28 +02:00
CTCaer
114abba815 bdk: hw init: do not touch audio clocks on t210b01 2023-02-11 23:13:41 +02:00
CTCaer
ec8c04db8a bdk: bpmp: add 563MHz clock for worst binnings 2023-02-11 23:12:14 +02:00
CTCaer
4d7eb6a647 bdk: clock: improve pllc deinit 2023-02-11 23:11:24 +02:00
CTCaer
fd3cf1b7f8 bdk: reg-5v: remove X3 pin 
X3 is vbus enable on mariko.
 2023-02-11 23:10:43 +02:00
CTCaer
47f0734ba0 bdk: display: add more oled color mode info 2023-02-11 23:09:38 +02:00
CTCaer
5bb9a244ea bdk: utilize new gpio functions 2023-02-11 23:08:32 +02:00
CTCaer
05b5e4f297 bdk: gpio: add simple gpio direction functions 2023-02-11 22:55:22 +02:00
CTCaer
4e15e034b8 bdk: sdram: remove (lp)ddr2/3 support 2023-02-11 22:44:31 +02:00
CTCaer
ee3fc499cd bdk: bm92t36: add sanity checks 
If bm92t i2c comms are broken, it can hang hekate. So sanitize buffer and max profile print supported.
 2023-02-11 22:40:47 +02:00
CTCaer
cfbfe403c6 bdk: di: wait 8ms before setting window for vic 2022-12-22 12:32:05 +02:00
CTCaer
50dd458cfd bdk: ums: use emmc_end instead of sdmmc_storage_end 2022-12-20 16:55:16 +02:00
CTCaer
0b1bb521d8 bdk: ini: add l4t key parsing 2022-12-19 05:38:03 +02:00
CTCaer
0e1eece04f bdk: hw-init: remove charger forced enable 
Anything that doesn't manage it properly should fix itself.
(Like for example disabling charging on sleep or something. They should use the gpio equivalent.)
 2022-12-19 05:35:04 +02:00
CTCaer
c9ab6352f6 bdk: rtc: add T210B01 R2P 2022-12-19 05:30:23 +02:00
CTCaer
09ca75dd8c bdk: max77812: exit if RAM reg and not 211 phase 2022-12-19 05:28:35 +02:00
CTCaer
560f077196 bdk: sdram: rename new dram chips 2022-12-19 05:25:26 +02:00
CTCaer
4d823d5909 bdk: slight refactor 2022-12-19 05:22:55 +02:00
CTCaer
a1fde0d9b6 bdk: display: disable LCD DVDD on display deinit 2022-12-19 05:16:35 +02:00
CTCaer
d0b22bf374 bdk: manage host1x only in hw init 2022-12-19 05:14:39 +02:00
CTCaer
6257d20db9 bdk: emmc: add emmc_set_partition 
Additionally, add SDMMC index info to errors.
 2022-12-19 04:53:50 +02:00
CTCaer
c0cc9c9f4f bdk: vic: ease stress to APB when enabling VIC clk 2022-10-13 00:16:08 +03:00
CTCaer
fe0bd89c4c bdk: pmc: extend pmc scratch locker 2022-10-11 14:41:42 +03:00
CTCaer
f534d5e316 bdk: i2c: fix send packet mode 2022-10-11 14:40:58 +03:00
CTCaer
2ea595e98d bdk: sdram: add new dram ids/configs 
On T210B01 dram ids 7 and 16 got removed.
29 to 34 were added.

Additionally, remove all deprecated and unused dram id enums.
 2022-10-11 10:38:43 +03:00
CTCaer
1a8075669d bdk: lvgl: allow theme to take a bg color value 2022-10-11 08:22:48 +03:00
CTCaer
9d889e2c3e bdk: Add driver for VIC 
VIC is a HW engine that allows for frame/texture buffer manipulation.
 2022-10-11 06:41:38 +03:00
CTCaer
bfad719fcd bdk: small refactor 2022-10-11 06:16:38 +03:00
CTCaer
07695196cb bdk: emmc: utilize emmc_end 2022-10-11 04:12:04 +03:00
CTCaer
8bbe403e41 bdk: util: replace strtol/atoi w/ custom versions 
To get rid of reentrancy baggage (which is not needed) and save binary space
 2022-10-11 04:11:21 +03:00
CTCaer
d08fac5a08 bdk: xusb: improve clock deinit 
Allows L4T to use XUSB on T210B01 after a UMS usage.
T210 somehow was fine.
 2022-10-11 04:07:24 +03:00
CTCaer
197ce4c76f bdk: sdmmc: timing changes 
- Correct HS102 naming to DDR100
- Fix clock for DDR50 (even if it's unused)
 2022-10-11 04:05:12 +03:00
CTCaer
eaa25114ad bdk: lvgl: do not do unneeded invalidations 
A bug was fixed that was causing full parent object invalidations when tapping into a window.

Now if the object is already on top the invalidation is skipped and the whole rerender/draw is skipped, saving valuable cpu time.
 2022-10-11 04:00:41 +03:00
CTCaer
0b2c2aa564 bdk: regulator 5V: improve management per SKU 2022-10-11 03:57:17 +03:00
CTCaer
2aa251c44f bdk: max77812: uncomment RAM regulator 2022-10-11 03:53:17 +03:00
CTCaer
c52c11e7bc bdk: mem: improve emc MRR reading 2022-10-11 03:51:12 +03:00
CTCaer
ff5ee9758d bdk: joycon: refactor some structs and comments 2022-10-11 03:49:18 +03:00
CTCaer
44b429d5cd bdk: display: Name panel 1040 to Sharp LQ055T1SW10 2022-10-11 03:45:49 +03:00
CTCaer
b891657fb6 bdk: tsec: fix regression on HOS 6.2.0 not booting 
With the latest BDK changes on enabling always on AHB redirect with a compile time flag, TSEC fw boot was regressed because it needs it off.

Always disable redirect and if the flag is enabled, enable it on exit.
 2022-07-11 22:28:09 +03:00
CTCaer
801ebd3543 bdk: xusb: fully clear device mode ctrl register on deinit 2022-07-11 22:13:13 +03:00
CTCaer
d259d6f6d6 bdk: watchdog: clear timer interrupt also in handling 2022-07-11 22:10:41 +03:00
CTCaer
70523e404f bdk: whitespace refactor 2022-07-11 22:10:11 +03:00
CTCaer
b787053c2d bdk: joycon: fixup hori pads 
For Hori game pads:
- Restore the no power down fix
- Revert RTS signal back to active high
 2022-07-01 13:47:41 +03:00
CTCaer
e921d8f51c bdk: update memory map with more used addresses 2022-06-29 12:13:04 +03:00
CTCaer
57c8fd1f8c bdk: fiq: watchdog handling 
`BDK_WATCHDOG_FIQ_ENABLE` enables watchdog handling.
`BDK_RESTART_BL_ON_WDT` causes a reload of bootloader on FIQ

These 2 are useful when wanting to detect and handle hangs.
 2022-06-29 12:12:03 +03:00
CTCaer
d38ddad873 bdk: display: correct night mode value 2022-06-27 10:27:18 +03:00
CTCaer
b0c0a86108 bdk: migrate timers/sleeps to timer driver 2022-06-27 10:22:19 +03:00
CTCaer
061e10152f bdk: timer: add timer/watchdog driver 2022-06-27 10:20:25 +03:00
CTCaer
b65b2d7f71 bdk: se: do not use heap for linked lists 2022-06-27 09:14:43 +03:00
CTCaer
50886382bf bdk: list: add LIST_FOREACH_INVERSE and LIST_FOREACH_ENTRY_INVERSE 2022-06-25 05:59:53 +03:00
CTCaer
2378bf2863 bdk: ini: simplify kv free 2022-06-25 05:56:11 +03:00
CTCaer
e5ddac5211 bdk: sdmmc: rename current limit to power limit 2022-06-25 05:53:04 +03:00
CTCaer
489e222aac bdk: sdmmc: expose csd/scr functions 2022-06-25 05:48:54 +03:00
CTCaer
16af97c79a uart: rename print to printf 2022-06-25 05:42:42 +03:00
CTCaer
bdb8f6d352 ccplex: name some flow control values 2022-06-25 05:42:19 +03:00
CTCaer
258a343e21 bdk: usb: support deconfiguration of endpoints 
TODO: Signal that to userspace and manage it.
 2022-06-14 18:48:21 +03:00
CTCaer
f6c9e636d1 bdk: usb: improve USB2/XUSB power down 
TODO: add more power downs on XUSB stack
 2022-06-14 18:46:46 +03:00
CTCaer
605f270f98 bdk: usb: fix a race condition in USB2 stack 
When RAM is slow (no training), it's possible to have the stack failing to negotiate configuration successfully.

The race condition is caused by not flushing cache before sending a configuration packet reply.
Although, cache is write-through, this needs to happen.
 2022-06-14 18:41:33 +03:00
CTCaer
c77c741c07 bdk: sdmmc: correct lower speed mode checks 
Both bus widths of 8 and 4 should be checked for HS200 support and host type support, instead of giving 8-bit bus width a free pass.
 2022-05-26 03:04:27 +03:00
CTCaer
bf00c79edb bdk: ini: add ini free 
Additionally, fix a bug where a list could not be initialized if section type is comment or caption.
 2022-05-19 15:03:00 +03:00
CTCaer
429074293a bdk: sprintf: no support for lower case hex and base that is not 10/16 2022-05-19 15:01:10 +03:00
CTCaer
2c768db542 bdk: heap: add nodes info 2022-05-19 14:53:02 +03:00
CTCaer
889317da58 bdk: sdmmc: add missing sd block size define 2022-05-16 13:34:36 +03:00
CTCaer
e09710e3eb bdk: fatfs: mkfs alignment changes 
- Default data alignment is now 1MB **when it's not set**
- Default volume alignment is now based on data alignment and not hardcoded to 16MB.
- Change max allowed alignment to 64MB.

The above changes allow selecting alignments for volume and data between 1MB and 64MB.
(From the previous 1 to 16MB for data and 16MB for volume).
 2022-05-16 13:33:38 +03:00
CTCaer
e9587a325c bdk: fuse: add ipatch support for T210B01 2022-05-16 13:05:12 +03:00
CTCaer
331f1926d1 bdk: display: remove unneeded pinmuxing on Aula 2022-05-16 10:16:24 +03:00
CTCaer
87fe374b3b bdk: uart: use 2 STOP bits based on baudrate 2022-05-14 12:25:02 +03:00
CTCaer
b56e788d12 bdk: pinmux: more proper uart pinmuxing 2022-05-14 12:20:57 +03:00
CTCaer
9e613a7600 bdk: hwinit: simplify uart debug port paths 2022-05-13 03:56:59 +03:00
CTCaer
b6384d5da5 bdk: utils: Set format attribute for s_printf 
This allows the custom sprintf to be recognized as printf by gcc and effectively doing format checking.

NOTE: 64bit formatting is not supported for now, even if gcc asks to be set.
 2022-05-12 16:40:34 +03:00
CTCaer
54b054c940 bdk: usb: add Sio support to hid gadget 2022-05-09 06:10:49 +03:00
CTCaer
f31170bb51 bdk: joycon: add Sio support (for Hoag) 2022-05-09 06:09:06 +03:00
CTCaer
f452d916c9 bdk: clock: add ext peripheral clock control 2022-05-09 06:08:39 +03:00
CTCaer
47d06d0e8a bdk: joycon: use flow control to improve packet integrity 2022-05-09 05:55:06 +03:00
CTCaer
2aed1b3b83 bdk: joycon: add 3 mbaud support and full init 
Additionally use states for proper init
 2022-05-09 05:48:10 +03:00
CTCaer
12aac3a0fc bdk: clock: add 3 megabaud support for UART 2022-05-09 05:47:08 +03:00
CTCaer
833a115eb2 bdk: joycon: improve and streamline jc detect 2022-05-09 05:39:45 +03:00
CTCaer
9f30c51bd1 bdk: joycon: refactor driver 2022-05-09 05:32:32 +03:00
CTCaer
f7bf4af3ec bdk: uart: refactor and add new functionality 
- Allow to set CTS/RTS mode (only specific combos supported for now)
- Support the above modes in receiving
- Set 2 stop bits to decreases errors on high baudrates
 2022-05-08 05:45:16 +03:00
CTCaer
ebe7b5a603 bdk: utils: add approx. square root calc for u64 2022-05-08 05:27:05 +03:00
CTCaer
ebf0db77ee bdk: sprintf: add negative number support for %d 
This will now force a number as negative if bit31 is set and properly create the relevant string.

That means that external handling in order to show sign is now not needed.
 2022-05-08 05:26:01 +03:00
CTCaer
81730c5f7e bdk: pinmux/pmc: add more defines 2022-05-08 05:22:41 +03:00
CTCaer
76d1b4e221 bdk: sdmmc: refactor defines 
And fix a bug with tuning trim values
 2022-05-08 05:21:29 +03:00
CTCaer
4a1cb1f2ea bdk: fan: add Hoag and Aula SKUs support 
Now that what was hanging Aula is found (using PWM with its clock disabled), add full support for fan control on both SKUs.
 2022-05-08 05:07:38 +03:00
CTCaer
58a2094448 bdk: reg 5v: add support for Hoag and Aula SKUs 
Add support back and make it more proper.
Also add fan regulator support also.
 2022-05-08 05:05:39 +03:00
CTCaer
37de367fef bdk: sdram: deduplicate dram configs 
Additionally add info about new hynix chip and correct ids 3 and 5 on T210B01 based Switch.
 2022-05-08 04:58:36 +03:00
CTCaer
450d95e573 bdk: di: correct samsung backlight set 
Now that vblank writes are fixed we can return to proper backlight set.

Additionally, account for the pwm smoothing when backlight is turned off. That's to avoid visible green tint glitches when display is also turned off.
 2022-05-08 04:53:13 +03:00
CTCaer
969a49edba bdk: di: reselect winA when done with winD config 2022-05-08 04:49:28 +03:00
CTCaer
9908eb8bb3 bdk: di: samsung panel: better init 
- Set display color profile to natural (it's still vivid but not overblown.)
- Enable PWM slope and set it to 6 frames in order to have smooth backlight transitions
 2022-05-08 04:48:55 +03:00
CTCaer
56dcbb2b23 bdk: di: cleanup configs 
Nintendo or Nvidia copied pasted the dynamic display code into static arrays in order to do the static hw init in bootloader and boot sysmodule.

Ofc that does double the work that is not needed at all, making it suboptimal.

Clean up every single config based on how tegra display interface hw works in order to save up space and make the process a bit faster.
 2022-05-08 04:45:03 +03:00
CTCaer
b9f40fed7a bdk: di: move plld setup code out of display obj 2022-05-08 04:41:05 +03:00
CTCaer
6ae4904c8f bdk: di: make dsi normal/vblank writes more robust 2022-05-08 04:36:20 +03:00
CTCaer
dd2bb0f555 bdk: di: refractor configs 2022-05-08 04:34:44 +03:00
CTCaer
0b8cdaf0ea bdk: di: split normal and vblank dsi reads 
And also make vblank reads more robust
 2022-05-08 04:23:31 +03:00
CTCaer
83c95d8a3b bdk: sdram: update 20/21/22 ids for new dram 
Dram chip is Samsung 4GB built on 1z-nm that allows for 40% lower power usage.
 2022-03-23 02:20:55 +02:00
CTCaer
ff214f25c1 bdk: update l4t hekatf prep functions 2022-03-23 00:58:20 +02:00
CTCaer
0fef90dc4c bdk: sd: return proper error for sd file save 2022-02-15 00:36:23 +02:00
CTCaer
ee465b98af bdk: sdmmc correct exit on eMMC < 4.0 modules 2022-02-15 00:24:53 +02:00
CTCaer
83b895a062 bdk: heap: improvements 
Correct types everywhere.
Add BDK_MALLOC_NO_DEFRAG that disables defragmentation on the heap.
 2022-02-15 00:22:38 +02:00
CTCaer
ce8d1eca91 bdk: remove sd mounts from ianos and check if sd is mounted in sd ops 2022-02-15 00:17:53 +02:00
CTCaer
3f65a30b2e bdk: more atf prep 2022-02-15 00:14:53 +02:00
CTCaer
7c74391754 bdk: bpmp: do not use full maintenance 
Instead use proper clean/invalidation of dcache.
 2022-02-15 00:14:14 +02:00
CTCaer
52bb6a96e5 bdk: nx emmc bis: fix out of cluster bounds accesses 2022-01-29 01:40:38 +02:00
CTCaer
6666dd4b46 bdk: fatfs: better PrFILE2 SAFE record creation 2022-01-29 01:40:05 +02:00
CTCaer
3fdb72ce37 bdk: i2c: correct order of spinlock wait 2022-01-29 01:34:01 +02:00
CTCaer
9a80f8b4b5 bdk: minerva: fix fsp op/wr check for l4t 2022-01-29 01:31:28 +02:00
CTCaer
ef5790cc2c bdk: mc: always on ahb arbitration 
- Removed disables
- SDMMC code now just checks if it has access
 2022-01-29 01:29:02 +02:00
CTCaer
7bb8b1da62 di: restore window config wait for inv pitch and block linear 2022-01-29 01:26:00 +02:00
CTCaer
192a936a31 bdk: add NX eMMC BIS driver 2022-01-20 13:21:04 +02:00
CTCaer
8327de8e2e bdk: replace NYX flag with proper flags 
- BDK_MINERVA_CFG_FROM_RAM: enables support for getting minerva configuration from nyx storage
- BDK_HW_EXTRA_DEINIT: enables extra deinit in hw_reinit_workaround
- BDK_SDMMC_OC_AND_EXTRA_PRINT: enables eMMC OC support (533 MB/s) and extra error printing
 2022-01-20 13:19:48 +02:00
CTCaer
960f3b23e7 bdk: ums: adhere to emmc ops changes also 2022-01-20 13:17:55 +02:00
CTCaer
b08e36a7b0 bdk: add emmc ops 
- Add support for lower eMMC bus speed init in case of failures
- Add error count reporting
- Function names and defines changed from nx_emmc to emmc (except autorcm helper function)
- Enabling emuMMC support needs BDK_EMUMMC_ENABLE flag passed over
 2022-01-20 13:14:38 +02:00
CTCaer
00110a8863 bdk: move sd ops into bdk 2022-01-20 12:48:41 +02:00
CTCaer
7ae4fd03c2 bdk: minerva: prep for ATF direct boot support 2022-01-20 12:43:24 +02:00
CTCaer
e071fe44b0 bdk: ini: reduce heap fragmentation/pressure 2022-01-20 12:41:20 +02:00
CTCaer
39d411dc68 bdk: uart: add uart va print 2022-01-20 12:39:32 +02:00
CTCaer
82f90fae28 bdk: utils: add vprintf 2022-01-20 12:37:41 +02:00
CTCaer
10e1f67dc5 bdk: utils: add strcpy with head/tail whitespace removal 2022-01-20 12:36:25 +02:00
CTCaer
10b479dc1c bdk: clock: add apb/ahb clock control 2022-01-20 12:32:57 +02:00
CTCaer
3dd12321f8 bdk: add activity monitor driver 2022-01-20 12:32:02 +02:00
CTCaer
c1441a64c7 bdk: se: expose xts functions and add nx xts 2022-01-20 12:28:26 +02:00
CTCaer
0e35e68fd5 bdk: se: add t210b01 data coherency WAR 2022-01-20 12:27:25 +02:00
CTCaer
853f10f774 bdk: pmc: update tzram defines 2022-01-20 12:13:35 +02:00
CTCaer
4628ee6dc5 bdk: di: window fb changes 
- Get fb address from in window regs
- Remove 2 frames wait
 2022-01-20 12:12:19 +02:00
CTCaer
3bb46c6470 bdk: di: allocate fifo buffer once 2022-01-20 12:09:29 +02:00
CTCaer
5e6a7c486b bdk: btn: enable HOME button as input 2022-01-16 01:05:42 +02:00
CTCaer
1a9c6bf983 bdk: correct reg init as per TRM 2022-01-16 01:04:52 +02:00