mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-22 18:06:40 +00:00
Code Issues Releases Activity
1708 commits 2 branches 75 tags 6.7 MiB
Commit graph

666 commits

Author SHA1 Message Date
CTCaer
685663dcf6 nyx: Add bis key print in console 2020-12-11 17:39:30 +02:00
CTCaer
cb61e856ad hos: Fix bis keygen for keygen rev 11 (HOS 9.1.0+) 2020-12-11 17:39:05 +02:00
CTCaer
5b8fb9fb6b Various refactoring and addition of comments 2020-12-11 17:25:59 +02:00
CTCaer
b8eff953c6 nyx: Utilize full shutdown based reboot for patched Erista also 2020-12-02 22:27:22 +02:00
CTCaer
cf1f94662c sdram: Correct some dram names 2020-12-02 22:26:06 +02:00
CTCaer
d287d40208 hos: Add HOS 11.0.0 support 2020-12-02 02:41:32 +02:00
CTCaer
2aa1ce5390 nyx: Add eMMC and SD vendor id decoding into names 2020-12-02 02:11:22 +02:00
CTCaer
cf175fc00d nyx: Add alternate power saving modes 
T210:
By default max power savings is enabled.
By changing `newpowersave=` to 0, it reverts to the old behavior of smaller power savings.

This was added to mitigate some strange DRAM chips, hanging from constant frequency change of a 800 MHz - 1600 MHz back and forth.

T210B01:
Defaults to a simple loop with no power savings. That's because of untrained ram.
 2020-12-02 02:07:31 +02:00
CTCaer
0954eb2b09 nyx: Use full shutdown based reboot on T210B01 
That's because of how the system is exploited.
 2020-12-02 01:45:12 +02:00
CTCaer
a1188505e8 usb: Add XUSB support mainly for T210B01 2020-12-02 01:13:52 +02:00
CTCaer
2424ecc4f0 Disable coreboot.rom chainloading for T210B01 
Unlike all RCM payloads that are based on hekate's hwinit, coreboot does full power management before sdram init is run.

Because of that and because it doesn't support T210B01, it does not hang as expected and configures all regulators and pins which can be dangerous!
 2020-12-02 00:57:32 +02:00
CTCaer
495907b8a4 sept: Mark as ready for Mariko 2020-07-04 21:36:37 +03:00
CTCaer
f9a1935762 nyx: Fix Dump pkg1/pkg2 and cal0 for Mariko 2020-07-04 21:36:04 +03:00
CTCaer
8ef9f888f6 hos: Add PK21 decryption support for Mariko 2020-07-04 21:35:26 +03:00
CTCaer
9b3e9724b7 hos: Add Mariko PK11 decryption and unpacking 2020-07-04 21:32:36 +03:00
CTCaer
8880dfab24 eks: Disallow on Mariko 2020-07-04 21:21:48 +03:00
CTCaer
5ffbbf40a5 hos: Add Mariko keygen 2020-07-04 21:13:25 +03:00
CTCaer
7acad84932 nyx: Disable TSEC keys status for T210B01 2020-07-04 21:04:57 +03:00
CTCaer
8d2230dc51 fuse: Correct fuse array size for T210B01 2020-07-04 21:04:20 +03:00
CTCaer
e4c0756ded nyx: Add DRAM names info + Mariko new ram codes 2020-06-26 22:41:34 +03:00
CTCaer
1c9efa327c Correct RCM patched status for Mariko 
This also disallows AutoRCM for Mariko.
 2020-06-26 22:40:06 +03:00
CTCaer
cabaa6cfb8 Utilize BIT macro everywhere 2020-11-26 01:41:45 +02:00
CTCaer
a84f1e5ee5 usb: Split descriptors to object and header 2020-11-15 14:10:00 +02:00
CTCaer
e45ffab5d8 Remove stray hekate cfg set. It's handled by default. 2020-11-15 14:00:35 +02:00
CTCaer
55568b037f nyx: Properly calculate Ranks and Channels in hw info 2020-11-15 13:50:19 +02:00
CTCaer
b5df428e43 nyx: Create bootloader folder on screenshots if missing 2020-11-15 13:47:47 +02:00
CTCaer
67a03bbd85 eks: Use LOT0 for identification 2020-11-15 13:43:22 +02:00
CTCaer
32955380c7 nyx: Fix icons for backup/restore swap 2020-11-15 13:40:53 +02:00
CTCaer
485edb4883 emc: Rename Device to Rank 2020-11-15 13:23:37 +02:00
CTCaer
8f222fd0bd main: Fix update.bin creation on first boot 2020-10-27 21:27:51 +02:00
CTCaer
1f5b371608 Refactor some names 
Additionally:
- Do not retry to init sd if all modes failed in Nyx.
- Do not try to read/write if sdmmc controller and card are not initialized.
 2020-10-23 06:32:24 +03:00
CTCaer
ce156ab4e7 hos: Automate some eks and bis checks 2020-10-20 11:53:28 +03:00
CTCaer
94235dd005 bm92t30: Add proper info 
The driver will now show more charger supported profiles and will also show selected profile.
 2020-10-20 10:42:57 +03:00
CTCaer
27b1f0e843 Various small fixes 2020-10-20 10:32:32 +03:00
CTCaer
dae7be8ec4 nyx: Allow disabling of Joycon 
Setting `jcdisable=1` in nyx.ini disables the usage of Joycon completely.

This also disables the BT pairing data dumping tool.
 2020-10-20 10:21:48 +03:00
CTCaer
2f5b52223c config: Add bootloader protection 
`bootprotect=1` enables protection of the `bootloader` folder inside HOS.

This disallows any reading/writing of the folder and its contents inside HOS, preventing any corruption of it.

This of course has the side-effect of homebrew that depend on it (e.g. hekate Toolbox) to not work fully.
 2020-10-20 10:16:12 +03:00
CTCaer
85d43147ee Bump hekate to v5.3.3 and Nyx to v0.9.4 2020-09-15 20:24:56 +03:00
CTCaer
e3e5dab0fc nyx: Add USB Charger info 2020-09-15 20:14:56 +03:00
CTCaer
e7900b11b4 nyx: Allow L4T last part to be unaligned 2020-09-02 13:11:03 +03:00
CTCaer
461d14c39a di: Correct panel id for AUO A062TAN02 2020-08-28 05:26:18 +03:00
CTCaer
3d05b58856 nyx: Add eMMC NAND cells life estimation 2020-08-15 12:33:11 +03:00
CTCaer
78c4e6510d hos: Add backup bootloader support 2020-08-15 12:30:18 +03:00
CTCaer
cd76d5ac09 nyx: Fix hang on using B button after Launch window 2020-08-15 12:22:01 +03:00
CTCaer
9c2a064817 nyx: Allow SD removal without reloading Nyx 2020-08-15 12:21:25 +03:00
CTCaer
db2da89f69 nyx: Remove delay on JC calibration 
This does not help with drifting as the logged values are always changing drastically.
 2020-08-15 12:19:43 +03:00
CTCaer
4fc420616d nyx: Control UART debug completely via makefile 
Also enables LvGL log.
 2020-08-13 10:21:00 +03:00
CTCaer
5140992a7b nyx: Add proper info about SD write protect 2020-07-19 20:56:08 +03:00
CTCaer
b8ca88ee0a exo: Change fatal names and add stack overflow 2020-07-18 12:53:05 +03:00
CTCaer
adfa7c0780 fuse: Use fuse count function for burnt fuses 2020-07-18 01:15:28 +03:00
CTCaer
11df6030f9 Various fixes 2020-07-18 00:54:35 +03:00
CTCaer
45ca2938f5 pmc: Move rail power function to its own object 2020-07-18 00:42:53 +03:00
CTCaer
32e58d2bb3 hw init: Cosmetic refactoring 2020-07-17 18:08:27 +03:00
CTCaer
638a3909c5 Refactor various variables and names 2020-07-17 18:00:32 +03:00
CTCaer
3c2d86ef7b sdmmc: Add protected area info (Content Protection) 2020-07-17 17:01:40 +03:00
CTCaer
f559017aeb di: Update display panels and info 2020-07-17 16:57:45 +03:00
CTCaer
3ddd1c26ad pkg1: Fix PK11 component split in pkg1/2 dump tool 2020-07-14 23:29:48 +03:00
CTCaer
ab5b59e10d Refactor fatal/hard error names 2020-07-14 22:41:48 +03:00
CTCaer
1f67251331 nyx: Use strcat whenever possible 2020-07-14 22:26:40 +03:00
CTCaer
4eecdfa553 nyx: Add decrypted CAL0 dumping 2020-07-14 21:16:52 +03:00
CTCaer
80dd0f1580 joycon: Skip first 4 packets for calibration 2020-07-14 21:13:37 +03:00
CTCaer
4e0c70a402 nyx: Do not timeout joycon with screenshot 
Additionally, screenshots are allowed only every 2s instead per second.
 2020-07-14 21:12:09 +03:00
CTCaer
ffd5a198f9 Beautify make size prints 2020-07-14 20:56:56 +03:00
CTCaer
ddc89c9f49 hos: Reduce size of pkg1 id array 2020-06-22 12:04:49 +03:00
CTCaer
3214fc2f93 nyx: Fix validation check for emuMMC restore 
When checking a partition for enough size for emuMMC restore, always check against the extra 16MB.
 2020-06-18 01:23:06 +03:00
CTCaer
3b0925b912 touch: Check if init failed and stop parsing if yes 2020-06-17 00:41:37 +03:00
CTCaer
c5f032fcb2 Fix building on msys2 2020-06-16 12:41:42 +03:00
CTCaer
564f36fc8b hos: Fix mkey validation on BIS derivation 2020-06-15 17:31:29 +03:00
CTCaer
6159284be6 nyx: Check for huge files in part manager backup 2020-06-15 15:05:47 +03:00
CTCaer
9afc6f0a4e joycon: Add bigger deadzone for virtual mouse 2020-06-15 15:04:46 +03:00
CTCaer
f689bb253e nyx: Add simple CAL0 info 2020-06-15 15:03:14 +03:00
CTCaer
0738c96867 nyx: Fix pkg1/2 dumping with new changes 2020-06-15 15:01:18 +03:00
CTCaer
edba8ca986 hos: Add BIS keys derivation 2020-06-15 14:59:45 +03:00
CTCaer
2aa9055fae Various fixes 2020-06-15 14:58:50 +03:00
CTCaer
029d66bd95 Fix build for lvgl UART log 2020-06-14 17:33:57 +03:00
CTCaer
c73b4ad6ba nyx: Include Hoag as Mariko in fuses info 2020-06-14 16:51:06 +03:00
CTCaer
6e256d29c7 Utilize hekate's BDK for hekate main and Nyx 2020-06-14 16:45:45 +03:00
CTCaer
185526d134 Introducing Bootloader Development Kit (BDK) 
BDK will allow developers to use the full collection of drivers,
with limited editing, if any, for making payloads for Nintendo Switch.

Using a single source for everything will also help decoupling
Switch specific code and easily port it to other Tegra X1/X1+ platforms.
And maybe even to lower targets.

Everything is now centrilized into bdk folder.
Every module or project can utilize it by simply including it.

This is just the start and it will continue to improve.
 2020-06-14 15:25:21 +03:00
CTCaer
9b1c61fbcf storage: Add cal0 struct 2020-06-14 14:11:15 +03:00
CTCaer
ae7ef7d79a fuse: Add get odm keygen type 2020-06-14 14:10:29 +03:00
CTCaer
273f11cd59 sdram: Extend sdram id 2020-06-14 14:07:21 +03:00
CTCaer
f5092bc981 heap: Add heap object copy 2020-06-14 14:02:13 +03:00
CTCaer
d607a8830b hos: Support new sept/exo keyslots 2020-06-14 13:53:21 +03:00
CTCaer
92d013dd65 eks: Upgrade to new version and support BIS keys 2020-06-14 13:42:48 +03:00
CTCaer
242bbdada5 storage: Better BIS support 
It now supports more than one crypto block and keys are expected to slot 0 and up to slot 5.
 2020-06-14 13:36:36 +03:00
CTCaer
d90f5b7e7c ccplex: Renable cluster object to ccplex in makefile 2020-06-14 13:34:13 +03:00
CTCaer
d95449c22d usb: Fix some issues with usb descriptors 2020-06-14 13:33:13 +03:00
CTCaer
4d8dbe068d sept: Remove support for obsolete no _00/01 suffix 2020-06-14 13:25:08 +03:00
CTCaer
157e415636 uart: Decreases timeouts to reduce latency 2020-06-14 13:21:59 +03:00
CTCaer
48f84c5cf4 gpio: Remove dependency to irq driver 2020-06-14 13:20:56 +03:00
CTCaer
1d3d1c8454 clock: Prevent PLLC4 from glitching 2020-06-14 13:19:53 +03:00
CTCaer
bb2b339b54 ianos: Remove sd (un)mount usage 2020-06-14 13:17:26 +03:00
CTCaer
5790c585f5 nyx: Reduce idle power draw by 280mW 2020-06-14 13:14:32 +03:00
CTCaer
a2655912d4 nyx: Auto center cursor based on its size 2020-06-14 13:13:27 +03:00
CTCaer
e2c905e9b2 joycon: More robust spi dumping for bd addr/ltk 2020-06-14 13:13:04 +03:00
CTCaer
9619417b07 nyx: Allow arc bits tool to work on all compat folders 2020-06-14 13:09:10 +03:00
CTCaer
b0bcdeafac nyx: Find best cluster size automatically 2020-06-14 13:07:42 +03:00
CTCaer
7b76015fd1 nyx: Fix an issue with hos partition initial size 2020-06-14 13:07:21 +03:00
CTCaer
465955c8f5 nyx: Use sd actual size for partition making 2020-06-14 13:06:43 +03:00
CTCaer
90a759b98e Use reconfig workaround for power off and reboots 2020-06-14 13:05:51 +03:00
CTCaer
0096b91146 Add corrupted bmp protection 2020-06-14 13:04:13 +03:00
CTCaer
125f000894 nyx: Use date/time for screenshot names 
Now that RTC clock can be offset in software it's good to have actual dates on screenshots.
 2020-06-14 13:02:54 +03:00
CTCaer
f9a0e6ce4f nyx: Show clock edit on boot if 0 offset 2020-06-14 13:00:55 +03:00
CTCaer
0d5a1416d0 nyx: Show SD card total blocks in info 2020-06-14 12:59:41 +03:00
CTCaer
43f3132069 nyx: Do not show SFD partitions as valid for emuMMC 2020-06-14 12:53:35 +03:00
CTCaer
3d00a1be21 nyx: Support multiple backup based emuMMC 2020-06-14 12:52:54 +03:00
CTCaer
87ce09f4b1 Some fixes 2020-06-14 12:50:54 +03:00
CTCaer
31f90a0a47 se: Fix CBC encryption 2020-06-14 03:10:30 +03:00
CTCaer
af30904624 se: Simplify oneshot execute calls 2020-06-14 03:10:04 +03:00
CTCaer
f2f995af17 se: Allow sha256 continuation without saving the msg 2020-06-14 03:08:27 +03:00
CTCaer
3dcd2ad15f hos: Header for pkg2 is now more proper 2020-06-14 02:23:02 +03:00
CTCaer
eb2c8a032f power: Enable charger unconditionally 2020-06-14 02:04:50 +03:00
CTCaer
416db840ec power: Refactor max17050 driver 2020-06-14 02:03:43 +03:00
CTCaer
b0c4cef077 power: Fix max77621 DVS voltage reg names 2020-06-14 02:02:26 +03:00
CTCaer
58d12e5754 power: Refactor bq24193 driver 2020-06-14 02:01:26 +03:00
CTCaer
bcda64a5df tsec: Decouple hos header dependency 2020-06-14 01:32:54 +03:00
CTCaer
ba77de3dc5 exo: Refactor exo_cfg context to exo_ctx 2020-06-14 01:29:41 +03:00
CTCaer
53325617bb hos: Small refactoring 2020-06-14 01:27:08 +03:00
CTCaer
8e836d958f Rename cluster to ccplex 2020-06-14 01:09:17 +03:00
CTCaer
8ce6bf82a9 Minimize make info noise during building 2020-06-13 18:39:17 +03:00
CTCaer
21548545fc Equalize hekate main and Nyx sd based functions 2020-06-13 18:32:40 +03:00
CTCaer
7dd3178d48 Equalize hekate main and Nyx common functions 2020-06-13 18:16:29 +03:00
Dave Murphy
cc54df87d7 fixes for compiling with gcc 10 
gcc 10 no longer lets you get away with not externing global variables in header files. This adds the necessary extern and adds defines in appropriate c files
 2020-05-08 23:32:44 +01:00
CTCaer
9698cbc9d7 nyx: Fix archive bits fixer and extention folders 2020-05-05 21:24:28 +03:00
CTCaer
d8b6aa3831 nyx: Correct the error message for format 2020-05-05 19:28:34 +03:00
CTCaer
3e5ef39686 nyx: Fix emummc slider when there's not enough space 2020-05-05 19:28:15 +03:00
CTCaer
bc7c65447d nyx: Add start clearing for ext4 partitions 2020-05-05 19:27:45 +03:00
CTCaer
a91378b9c1 nyx: Allow always writeable emmc via config 
The key is `umsemmcrw` and resides in nyx.ini
 2020-05-05 19:26:10 +03:00
CTCaer
5b91c54936 fatfs: Backport some fixes 2020-05-05 19:21:07 +03:00
CTCaer
322280757f nyx: Fix time offset parsing 2020-05-05 19:20:04 +03:00
CTCaer
b1636fbb96 nyx: Add unsaved config changes pop up 2020-05-05 19:19:12 +03:00
CTCaer
cc18a7b146 nyx: Allow changing Date/Time via tickers 2020-05-05 19:17:29 +03:00
CTCaer
5fe84a78ac rtc: Remove custom encoding 2020-05-05 19:16:16 +03:00
CTCaer
822e0dcd98 Various small fixes 2020-05-05 19:11:39 +03:00
CTCaer
a6be3714a3 ums: Update Nyx status bar during UMS 2020-05-05 19:02:01 +03:00
CTCaer
f56d1bad04 nyx: Allow hue icons from section names 2020-05-05 19:01:08 +03:00
CTCaer
e8f41a03f3 res: Fix name of colorized lakka icon 2020-05-03 02:52:51 +03:00
CTCaer
8edc9971f9 nyx: Refactor launch icon colorization 
The Switch and Payload icons will be colorized by default, because they are system icons.

Users can still replace them with icons named `icon_switch_custom.bmp` and `icon_payload_custom.bmp` that do not get colorized.
 2020-05-03 01:57:15 +03:00
Nichole Mattera
afb820202d Small fix to make sure icon_path is long enough. 2020-05-02 16:34:06 -04:00
Nichole Mattera
0ce973966f Add support for launch icons changing color with theme. 2020-05-02 16:16:38 -04:00
CTCaer
11ca71cbc7 joycon: Wait for disconnect cmd reply 2020-05-01 17:29:05 +03:00
CTCaer
3794c61ab2 Mitigate a L4T Joy-Cond driver issue 2020-05-01 17:28:24 +03:00
CTCaer
dde3ca2d73 sdmmc: Properly disable parent clock 2020-05-01 03:41:00 +03:00
CTCaer
4d1b59c05b Update Readme 2020-04-30 16:33:14 +03:00
CTCaer
a0c3323b7c nyx: Allow emuMMC backup now that is working 2020-04-30 16:29:03 +03:00
CTCaer
c9e53d4b1d nyx: Decrease idle power drain 2020-04-30 16:27:40 +03:00
CTCaer
4b62b1f69f nyx: Introducing Partition Manager for SD Card 
Allow you to select up to 2 emuMMC + Linux + Android.
Any combo is allowed, even if you just want to repartition it back to one FAT partition.

The procedure is automatic on selecting sizes and offsets.

The tool is also able to backup your SD Card into Ramdisk and then get restored, if the total used size is less than 1GB.
If you have more files than that, you will be asked to copy your files to your PC via UMS.

It also allows you to flash L4T Linux images and Android Twrp images.
The Flash Android can be also used to reboot into Twrp if a file to flash is not found.
 2020-04-30 16:12:55 +03:00
CTCaer
91c2c891fd nyx: Fix verification bar/percent not updating 2020-04-30 15:13:12 +03:00
CTCaer
1ba0a7d264 nyx: Allow restoring eMMC backup of different size 
You will get a warn. If you choose to skip without reading it, then you are toasted.
 2020-04-30 15:12:34 +03:00
CTCaer
5f6bf332d3 nyx: Add emuMMC partition backup 
For now it will automatically dump the first found and the size will be based on its GPT.
 2020-04-30 15:11:18 +03:00
CTCaer
448cc49cff hwinit: Add proper deinit for new components 2020-04-30 15:09:25 +03:00
CTCaer
81f0c0a0dc touch: Add FB SRAM read function 2020-04-30 15:06:31 +03:00
CTCaer
95c1046765 nyx: Add eMMC and SD read benchmarks 2020-04-30 15:05:41 +03:00
CTCaer
2a8c27115c fatfs: Use RTC clock for date/time 2020-04-30 15:04:52 +03:00
CTCaer
b6933013be storage: Add primitive BIS support 2020-04-30 15:04:20 +03:00
CTCaer
a2bb576c03 fatfs: Add Ramdisk support 2020-04-30 15:03:25 +03:00
CTCaer
c8d6da5a23 storage: Add Ramdisk driver 2020-04-30 14:58:53 +03:00
CTCaer
f09263d3be nyx: Add Update r2p option 2020-04-30 14:56:44 +03:00
CTCaer
fdfd383c34 nyx: Add Joy-Con Bluetooth pair info dump 2020-04-30 14:55:51 +03:00
CTCaer
39a32fc83d nyx: Add Nyx Options (Theme, Homescreen, Time) 2020-04-30 14:55:15 +03:00
CTCaer
c072041039 nyx: Add time offset 
The epoch is based on HOS format.

An automatic time set will be implemented in a later version.
 2020-04-30 14:51:48 +03:00
CTCaer
6d75f96ed5 nyx: Add Home Screen selection 
You can now choose between Main menu and Launch/More Cfg as home screens.
 2020-04-30 14:49:28 +03:00
CTCaer
ab304c9178 nyx: Small fixes in init 2020-04-30 14:45:59 +03:00
CTCaer
abcb1dec46 boot cfg: Allow Launching UMS from boot. 
By using `BOOT_CFG_AUTOBOOT_EN` in `boot_cfg` and `EXTRA_CFG_NYX_UMS` in `extra_cfg` you can launch UMS from boot.

The `ums` variable must be populated with one of the following:

```
NYX_UMS_SD_CARD      0
NYX_UMS_EMMC_BOOT0   1
NYX_UMS_EMMC_BOOT1   2
NYX_UMS_EMMC_GPP     3
NYX_UMS_EMUMMC_BOOT0 4
NYX_UMS_EMUMMC_BOOT1 5
NYX_UMS_EMUMMC_GPP   6
```
 2020-04-30 14:44:27 +03:00
CTCaer
ac4bf9cf2c nyx: Add tab separator for Tools tabs 2020-04-30 14:32:52 +03:00
CTCaer
72a51f9506 nyx: Add Touch Panel Calibration tool 2020-04-30 14:31:32 +03:00
CTCaer
d50a77f861 nyx: Fix Archive bits tool v3 2020-04-30 14:30:37 +03:00
CTCaer
0ecd6b16b0 nyx: USB Gamepad emulation (Joy-Con) 
This allows you to use your joycon as a free gamepad for your PC. Often paired with tools like x360ce.
 2020-04-30 14:28:16 +03:00
CTCaer
4dcbaa8c2b Update Clocks and Fuses for USB 2020-04-30 14:25:58 +03:00
CTCaer
2261dbce83 nyx: USB Mass Storage support (SD/eMMC/emuMMC) 2020-04-30 14:25:43 +03:00
CTCaer
53ff1102df usbd: Add device descriptors 2020-04-30 14:15:50 +03:00
CTCaer
b01b49aff4 usbd: Add USB Gadget HID driver 2020-04-30 14:15:26 +03:00
CTCaer
c9a7659d93 usbd: Add USB Gadget UMS driver 2020-04-30 14:14:58 +03:00
CTCaer
4f75cd62e5 usb: Add USB Device driver 2020-04-30 14:14:16 +03:00
CTCaer
2a74715c3c Update some copyrights 2020-04-30 14:10:08 +03:00
CTCaer
1210c3e689 nyx: Add log window screenshots for debugging 2020-04-30 14:09:11 +03:00
CTCaer
a3f430c224 nyx: Add capture effect on screenshots 2020-04-30 14:08:25 +03:00
CTCaer
2f7be43ccb nyx: Allow screenshots only every 2s 2020-04-30 14:08:06 +03:00
CTCaer
f5432c734c nyx: Utilize Log Window 
- or + on Joy-Con displays the log screen.
If there are errors somewhere, they are normally also logged in there.
 2020-04-30 14:07:26 +03:00
CTCaer
5ca35aa4fc memory map: Repartition RAM based on new needs 2020-04-30 14:03:57 +03:00
CTCaer
2dd474ad26 gfx: Switch Nyx gfx prints to landscape 2020-04-30 14:01:10 +03:00
CTCaer
97e45346ea display v2: Utilize Window D as log window 2020-04-30 13:58:41 +03:00
CTCaer
6c1ce41900 display v2: Add Cursor Window 2020-04-30 13:57:43 +03:00
CTCaer
4a57901746 display v2: Always check if already initialized 2020-04-30 13:55:26 +03:00
CTCaer
c32636b8cb nyx: Fuses info is now HW and Fuses info 
Additionally add chip revision info
 2020-04-30 13:54:11 +03:00
CTCaer
190ffdaa5a nyx: Add DRAM modules info 2020-04-30 13:51:46 +03:00
CTCaer
bdd2b40c96 nyx: Add Touch panel info 2020-04-30 13:51:25 +03:00
CTCaer
53f54cf23b nyx: Add display panel info 2020-04-30 13:50:58 +03:00
CTCaer
474d531788 display v2: Add multiple panel support 2020-04-30 13:49:03 +03:00
CTCaer
3db55df0a6 display v2: Refactor everything 2020-04-30 13:45:28 +03:00
CTCaer
1483a61f11 nyx: Add joycon fallback support as a virtual mouse 
Cursor Movement: Left Stick
Click: A / ZL / ZR
Back: B
 2020-04-30 13:16:30 +03:00
CTCaer
7b715f7be9 input: Add Joy-Con UART driver 2020-04-30 13:02:14 +03:00
CTCaer
56034f9aac nyx: Ensure that close button var always gets nulled 2020-04-30 04:32:55 +03:00
CTCaer
7e96a4dd3a nyx: Keep last close button to a var 2020-04-30 04:25:51 +03:00
CTCaer
523c81f797 nyx: Add theme colors for highlight text 2020-04-30 04:04:24 +03:00
CTCaer
f540c8250b nyx: Disallow eMMC ops with low battery 2020-04-30 03:59:16 +03:00
CTCaer
e89b7f12dd nyx: Update hekate theme 2020-04-30 03:57:10 +03:00
CTCaer
11f1f65ed1 rtc: Fix hour parsing 2020-04-30 03:53:29 +03:00
CTCaer
071dfa9792 lvgl: Enable keyboard and add HEX mode 2020-04-30 03:53:04 +03:00
CTCaer
3cecb03dac nyx: Fix a long standing heap corruption issue 2020-04-30 03:51:13 +03:00
CTCaer
a7c64f8ba2 lvgl: Better heap alignment 2020-04-30 03:49:40 +03:00
CTCaer
6749dad1a4 lvgl: Fix HSV to RGB calculation 2020-04-30 03:49:10 +03:00
CTCaer
aadb88eeea regulators: Enable 5V to missing GPIO AO IO rails 2020-04-30 03:46:21 +03:00
CTCaer
2c4d6552e9 Fixes to battery charger and fuel gauge ICs 2020-04-30 03:45:19 +03:00
CTCaer
c2e8d51115 hos: Add EKS 2020-04-30 03:43:29 +03:00
CTCaer
1d69809022 sdram: Allow killing ram clock source if desired 2020-04-30 03:39:18 +03:00
CTCaer
093f14923c sdram: Document cfg and use vendor patches 2020-04-30 03:37:40 +03:00
CTCaer
63768ccc99 uart: Add rounded clocking for 1 mbaud 2020-04-30 03:34:05 +03:00
CTCaer
54faa38920 utils: Add normal CRC32 2020-04-30 03:30:51 +03:00
CTCaer
ae1bb909b6 se: Add prng128 generator and get aes keys 2020-04-30 03:29:05 +03:00
CTCaer
ecb616e411 sdram: Add MR read request 2020-04-30 03:27:39 +03:00
CTCaer
8c762c52e2 Various fixes and whitespace removal 2020-04-30 03:25:22 +03:00
CTCaer
e14a7d1d4d nyx: Clear partition start when creating emuMMC 2020-04-30 02:05:24 +03:00
CTCaer
08c81fe1f8 Move verification config to nyx config 2020-04-30 02:00:33 +03:00
CTCaer
63be93be64 nyx: Use a static color for verifying bar indicator 2020-04-30 01:35:18 +03:00
CTCaer
de4891e133 nyx: Correct label styles set 2020-04-30 01:33:14 +03:00
CTCaer
8fd398f213 nyx: Fix heap corruption while parsing emmc gpt 2020-04-30 01:31:01 +03:00
CTCaer
ec53aa86dd emmc: Use gpt struct and only add valid entries 
Additionally keep track of partition index
 2020-04-30 01:29:58 +03:00
CTCaer
51985ed2ca sdmmc v2: Bus/IO clock refactoring and fixes 
Use the exact same clocks with HOS and utilize low jitter clock parents.

Add back our compatibility mode and the missing timeout clock parent.

Hekate main will continue to use PLLP clock parent for all.
 2020-04-30 01:26:55 +03:00
CTCaer
67ae7b9dcb nyx: Add SD Card error report in Console Info 2020-04-30 01:09:48 +03:00
CTCaer
96654d9620 nyx: Throw a warning if SD Card in 1 bit mode 2020-04-30 01:05:22 +03:00
CTCaer
ce97b97c8d sdmmc v2: Add full SD card fallback initialization 
hekate main always runs in compatibility mode (SDR82).
This ensures speed on boot process.

Nyx will first try SDR104.
If the sd card is a sandisk U1 and fails, it will try the compatibility mode.
After that it fallbacks to lower bus speeds.

Both support 1bit mode for broken sd card readers.

Having the new error checking in the sdmmc driver, allows for all that to work.
It can now fail instead of continuing, like how HOS reacts.
 2020-04-30 00:00:00 +03:00
CTCaer
034f680a8e sd fs: Move sd init/mount/helpers to their own object 2020-04-29 23:20:18 +03:00
CTCaer
7d17e34dee sdmmc v2: Add eMMC overclocking 2020-04-29 22:11:23 +03:00
CTCaer
d0a16a49b6 sdmmc v2: Add error checking for all cases 2020-04-29 22:09:36 +03:00
CTCaer
5442547a59 sdmmc v2: Name eMMC physical partitions 2020-04-29 22:06:33 +03:00
CTCaer
10e7e06048 sdmmc v2: Move address alignment check in driver 2020-04-29 21:46:25 +03:00
CTCaer
eac6426125 sdmmc v2: Driver fixes 2020-04-29 21:43:07 +03:00
CTCaer
88b01994bd sdmmc v2: HW driver fixes 2020-04-29 21:39:03 +03:00
CTCaer
66780bb4c2 sdmmc v2: Refactor and fix registers 2020-04-29 21:23:28 +03:00
CTCaer
7f26981fa1 sdmmc v2: Refactor function names and vars 2020-04-29 21:16:44 +03:00
CTCaer
5b0a0070c7 sdmmc v2: Refactor everything 2020-04-29 18:53:29 +03:00
CTCaer
0462f3b252 Add simple exception handling 
This adds support for exception handling.
It should provide simple and fast reporting of crucial info and full restoration without powering off.
 2020-04-27 09:56:19 +03:00
CTCaer
9a5cfdff4c gpio: Upgrade GPIO driver 
Use macros to get bank addresses and add full configuration support.
 2020-04-27 09:51:25 +03:00
CTCaer
cb3b1bf6e1 irq: Add Legacy Interrupt Controller driver 2020-04-27 09:49:00 +03:00
CTCaer
b4d2df8111 Name various t210 registers 2020-04-27 09:47:47 +03:00
CTCaer
4160037c81 emummc: Add boot entry emuMMC selection 
Using the key `emupath` on a boot entry will load the selected emuMMC.
This can also be forced by using the correct boot cfg storage bit and writing the path at the emummc path offset. Check readme for these.

This can only be used if the emuMMC was created via Nyx. because of the raw_based and file_based files that have emuMMC info.
(emupath=emuMMC/RAW1, emupath=emuMMC/SD00, etc)
 2020-04-27 09:30:53 +03:00
CTCaer
3fa537e54a nyx: Move emummc cfg load function 2020-04-27 09:18:31 +03:00
CTCaer
f35c18a0c2 nyx: Refresh emuMMC status after a creation 2020-04-27 09:13:22 +03:00
CTCaer
aff137ac34 nyx: Allow partition selection for emuMMC raw 2020-04-27 09:09:52 +03:00
CTCaer
6236b0ab00 nyx: Use mbr context for emuMMC partition 2020-04-27 09:06:53 +03:00
CTCaer
ae656a0f81 types: User a proper struct for MBR partition table 2020-04-27 08:58:37 +03:00
CTCaer
6a6648d3b3 nyx: Change many lvgl static labels to dynamic 2020-04-27 08:47:00 +03:00
CTCaer
da149c296f touch: Reinitialize up to 3 times if failed 2020-04-14 17:52:22 +03:00
CTCaer
9af4c717a8 util: Add btn_read_vol 2020-04-14 17:51:42 +03:00
CTCaer
281e5a138e sept: Create sept folder if missing 2020-04-14 17:45:34 +03:00
CTCaer
e7f8b2c6c2 hos: Add HOS 10.0.0 support 2020-04-14 17:43:43 +03:00
CTCaer
3d9c64d548 hos: Use a new method to get kernel/ini1 offsets 2020-04-14 17:40:41 +03:00
CTCaer
5f142b4c86 main: Add empty battery screen 
This disables low battery monitor shutdown (LBM shutdown) on boot and checks if battery is enough.

The logic is as follows:

If battery is not enough:
- If not charging and 15s pass, it will re enable LBM shutdown and power off.
- If charging, it will wait until it is charged above the limit.
 Screen will auto turn off to save power. A press on Power button or a change on charger, will enable it for another 15s.

If battery is enough:
- Enables LBM shutdown and continues with the boot process.
 2020-04-06 05:54:45 +03:00
CTCaer
dc9c7fd95c touch: Do a panel HW test before calibration 
In case the panel or the panel connection has issues, abort the calibration.
 2020-03-25 01:38:16 +02:00
CTCaer
4ec7befe82 touch: Small refactor 2020-03-25 01:31:58 +02:00
CTCaer
a39ba2cd71 lvgl: Fix edge case in lv_label_set_text 
This fixes an edge case where the original label set was done with set_static_text, the next one with set_text and the text is at the same address.

The incomplete check would think that the text resides on heap and it would reallocate it as such, effectively corrupting .data on the next sets.
 2020-03-22 04:48:50 +02:00
CTCaer
9c6931a17c Bugfixes 
The fan driver change ensures power off in any situation where a chainload software re-enables the 5V regulator.
 2020-03-21 22:28:50 +02:00
CTCaer
976925c697 nyx: Allow cancellation of emuMMC creation 2020-03-21 22:27:17 +02:00
CTCaer
d50af46b03 chnldr: Support variable sizes of coreboot.rom 2020-03-21 22:18:40 +02:00
CTCaer
52874f9113 minerva: More protections 2020-03-21 22:10:06 +02:00
CTCaer
91a241dafa touch: Add Tuning Calibration 
This, for now, can be done at Nyx boot by holding VOL- and VOL+.

Make sure that you don't touch the touchscreen.
 2020-03-21 22:03:51 +02:00
CTCaer
76676f3a2e nyx: Allow for big filepaths for archive bit fixer 
It also fixes corruptions/hangs when path is bigger than 255 chars
 2020-03-18 06:30:11 +02:00
CTCaer
f5040f1e41 Update and add missing copyrights 
Probably more need to change.
 2020-03-14 09:24:24 +02:00
CTCaer
c9c3c8f716 touch: Add context based ready checks on init 2020-03-13 17:36:44 +02:00
CTCaer
144d6fd3f6 i2c: Update drivers 
Adds support for 8 byte transfers needed by touch driver changes.
 2020-03-13 10:25:27 +02:00
CTCaer
9697067466 touch: Add fw info 2020-03-13 08:48:20 +02:00
CTCaer
8539095bdb touch: Proper init 
This patch applies the simpler init from HOS driver.

The most important change is enabling a feature that the fw supports:
Automatic tuning and calibration based on saved tuning values (running HOS only once saves these).
 2020-03-13 08:39:38 +02:00
CTCaer
95e3159fe9 touch: Correct pressure calculation 
Fingertip S for Nintendo Switch uses a custom spatial calculation. It now allows to identify area of touch.
 2020-03-13 08:34:16 +02:00
CTCaer
8d5c52f087 lvgl heap: Fix critical issue with node header size 
This fixes a critical issue where the node header was 28 bytes instead of 32, causing misalignment and heap corruption.
 2020-03-09 08:39:31 +02:00
CTCaer
e6c1d9bf66 nyx: Simplify label sets 
- Use only lv_label_set_text to simplify label sets
- Fix an issue with a label cut
- Add more maintenance functions for DRAM training
 2020-03-09 08:37:41 +02:00
CTCaer
a52af1bf41 Fix building on make 4.3 2020-03-04 01:34:35 +02:00
CTCaer
ac92ca220f fan: Better thermal logic based on HOS patterns 2020-03-03 04:37:59 +02:00
CTCaer
ab8801d0de touch: Add edge compensation 
Switch touch panels have a 10-15px offset around the edges.
(10-1269, 10-709) / (15-1264, 15-704)
This allows touch driver to report a max of 0-1279, 0-719.
 2020-03-03 04:28:12 +02:00
CTCaer
f3802ec464 lists: Fix list member iteration with no entries 2020-03-03 04:24:38 +02:00
CTCaer
bc7a7bcfa0 info: Allow dumping of battery characterization table 2020-03-03 04:22:59 +02:00
CTCaer
6a52d44da6 heap: Fix edge case of reusing first node 
There is an edge case fixed where the whole would be freed and this would make use of a nullptr.

Additionally, remove usage of reserved names for vars and add comments on how it works.
 2020-03-03 04:16:20 +02:00
CTCaer
03a8a11933 Small fixes and changes 
- Allow printing of more log on HOS boot when LOGS are OFF.
- A small name refactoring
- Add battery warning symbol when battery < 3200mV
 2020-03-03 04:11:13 +02:00
CTCaer
4c1f67d022 Fix build errors 2020-01-19 15:22:59 +02:00
CTCaer
2a161b572b sdmmc: Set power cycle wait to 0 at boot 2020-01-17 09:19:58 +02:00
CTCaer
422852795f ini: Remove \r stripping as is done by FatFS 2020-01-17 09:18:31 +02:00
CTCaer
4d53f21387 mtc: Clear init magic on chainload 
Fixes a hang caused when rebooting 2 payload from L4T with old hekate in vendor partition.

L4T does not overwrite the nyx storage where the Minerva configuration is stored.
This makes new Minerva parse the wrong tables from old hekate and eventually hang the RAM, which causes an exception on BPMP.
 2020-01-14 23:41:15 +02:00
CTCaer
9263e2192f nyx: Fix low battery voltage color 2020-01-07 06:50:33 +02:00
CTCaer
c99a87dd09 clock: Move PLLC config from bpmp.c to clock.c 2020-01-07 06:46:22 +02:00
CTCaer
009db77426 bpmp: Switch to PLLC for SCLK/BPMP clock source 2020-01-07 06:26:29 +02:00
CTCaer
2f43145131 uart: Add invert, get/set IIR and fifo empty functions 2019-12-16 22:16:40 +02:00
CTCaer
e3fca2bce5 uart: Add timeout and len report to uart receive 2019-12-16 22:15:21 +02:00
CTCaer
da112a0ae9 uart: Proper uart init 2019-12-16 22:12:09 +02:00
CTCaer
90060d1d83 mtc: Don't rely on clean BSS for Minerva lib 2019-12-16 22:06:13 +02:00
CTCaer
1ccce5f1a2 gfx: Fix off-by-one in right half of 16px rendering 2019-12-16 21:49:54 +02:00
CTCaer
2aaa0331ac rtc: Add epoch convertion functions 
Thanks @shchmue for the HOS conversion
 2019-12-14 22:27:07 +02:00
CTCaer
7604239237 bpmp: Update driver to latest 2019-12-14 22:21:42 +02:00
CTCaer
1e4d63731b nyx: Fix about screen 2nd pane left margin 2019-12-12 00:20:14 +02:00
CTCaer
a664118fc7 r2p: Update r2p payload 
2 modes:
- With updater2p; Forces the reboot to payload binary to be hekate
- Without; Checks if hekate and then if old
 2019-12-12 00:13:32 +02:00
CTCaer
c6e92311f9 Add error printing for issues with libraries 
It will now show erros for the following:
- Missing or old libsys_minerva.bso (DRAM training).
- Missing libsys_lp0.bso (LP0 sleep mode).
- Missing or old Nyx version
 2019-12-11 11:22:11 +02:00
CTCaer
24d30a40f9 hos: Add Atmosphere's system mem increase patches 2019-12-10 19:20:02 +02:00
CTCaer
e4f7928513 minerva: Fix compatibility check for hekate main 
Init now also returns status.
 2019-12-09 22:27:01 +02:00
CTCaer
bd8a5ece58 heap: Fix type for heap monitor memset size 2019-12-09 19:30:45 +02:00
CTCaer
d0850516ab Bump hekate to v5.1.0 and Nyx to v0.8.3 2019-12-08 18:59:00 +02:00
CTCaer
4c5a78de6f hos: Fix pkg2 keygen with newer sept 
This change also adds support for older sept binaries.
 2019-12-08 18:32:09 +02:00
CTCaer
c12c696e53 hos: Add 9.1.0 support 2019-12-08 03:01:21 +02:00
CTCaer
f256bd5909 Move all I/DRAM addresses into a memory map 
Many addresses were moved around to pack the memory usage!
 2019-12-08 02:23:03 +02:00
CTCaer
0290892b23 nyx hw reconfig: Add fan and 5V regulators deinit 
Additionally re-arrange minerva and mmu after these.
 2019-12-08 01:41:57 +02:00
CTCaer
643a8ea8f9 fan: Update driver 
Make use of 5V regulator driver and fixe some bugs
 2019-12-08 01:38:12 +02:00
CTCaer
a6d8854499 power: Add 5V regulator driver 2019-12-08 01:36:35 +02:00
CTCaer
96bafd8bd7 nyx: Use color when battery voltage < 3200mV 
For status bar and Battery Info.
 2019-12-08 01:32:26 +02:00
CTCaer
65ee728939 nyx: Enable fan when temps are high 2019-12-08 01:26:26 +02:00
CTCaer
e1748a0727 nyx: Boost eMMC backup/restore verification times 
This change allows SE to start verifying the first buffer while the 2nd is populated. Effectively cutting verification down to almost half.
 2019-12-08 01:20:05 +02:00
CTCaer
35e853fd03 touch: Change I2C4 pinmuxing as per HOS 2019-12-07 23:23:01 +02:00
CTCaer
7e26be6587 lvgl: Optimize color blending 
The manual optimization done dramatically increases performance in software color blending.
Isolated gains reach 20-30%.

Color blending calculates 2 +1 color channels instead of the expensive 1+1+1 calculations.

This is as best as it gets without going in asm optimizations.
 2019-12-07 20:47:19 +02:00
CTCaer
733da0f4d5 nyx: Remove compiler flags to gain extra perf 
- Removing no-inline produces 30-50% performance gains on specific real time sensitive functions used for rendering.
On overall, this will give 5-10% observed performance gains.

- Strict aliasing produces some extra small gains.
 2019-12-07 20:35:17 +02:00
Kostas Missos
a357395cc6 nyx: Remove LTO in order to increase performance 
Perf gains from removing LTO linker flag amounts to actually more than 5% average in real usage scenarios in Nyx.
(These include overall timings with static waits included. So basically as observed by user.)

Gains observed, on many isolated cases, were between 15-35%.

Additionally, this will make compiling fast again.
 2019-12-07 20:26:51 +02:00
Kostas Missos
48c15a8fde nyx: Release the shackles 2019-12-07 20:16:38 +02:00
Kostas Missos
0b45a5a11a bpmp: Reduce freq to 589MHz 
3 users had issues with 602MHz.
This will probably bring the SoC binning compatibility to 100%.

Additionally, make it easy to change default boost frequency.

The tiny loss in perf, will be mitigated in Nyx. (It's actually even faster)
 2019-12-07 02:01:29 +02:00
Kostas Missos
bc7dec2e61 bpmp: Add forcable maintenance 
+ Fix build issues
 2019-12-07 01:47:44 +02:00
CTCaer
9811ba53e0 pmic: Enable Low Battery Shutdown for 2.8V 
There's an increasing ammount of users that kill their batteries when forgetting their devices into AutoRCM / RCM mode.

This will now force a shutdown the moment the battery reaches 2.8V. Even if device is inside RCM mode.

Notice: We might need to increase the limit.
 2019-12-04 22:06:34 +02:00
CTCaer
a16b1af698 pmic: Always ensure that values were written 2019-12-04 22:02:17 +02:00
CTCaer
641a57a4f6 hos/mtc: Add FSP WAR and boost HOS booting times 
By implementing FSP WAR we can allow HOS to boot in 1600MHz and be able to switch frequency without hanging.
 2019-12-04 21:59:58 +02:00
CTCaer
84328aa676 minerva: Make use of new minerva 
- Training and switch is now faster
- Compatibility checks: New Minerva does not allow old binaries. New binaries do not allow old Minerva
- MTC table is now in a safe region
- Periodic training period increased to every 250ms
 2019-12-04 21:56:45 +02:00
CTCaer
dd8ec0d28b clock: Always wait 2us before deasserting reset 2019-12-04 21:32:51 +02:00
CTCaer
0b1eebefe1 Small refactor and bugfixes 2019-12-04 21:31:39 +02:00
CTCaer
168de9ddd8 sdmmc: Ensure aligned DMA buffers 2019-12-04 19:42:25 +02:00
CTCaer
b61b212218 lvgl heap: Align addresses & sizes to cache line size 2019-12-04 19:04:11 +02:00
CTCaer
ec10b572d1 heap: Quality updates to heap management 
- Allow reuse of unused sections that fit exactly to selected allocation size. Decreases fragmentation dramatically.
- Always allocate and align mapped memory to selected alignment. Avoids having fragmented unused maps that are not aligned.
- Use a static alignment based on BPMP and generally average cache line size. Boosts performance when MMU is used.
 2019-12-04 19:02:28 +02:00
CTCaer
d1e50c558e sdram: Refactor and fix some bugs in init 2019-12-04 18:53:36 +02:00
CTCaer
2c1da3a97d se: Upgrade SE and allow SHA calc continue 
- Allow SHA to calculate sizes > 16MB and refactor sha function
- Name various registers and magic numbers
- Fix various key access bugs

In a later commit this new design will boost verification times significantly and also allow full SHA256 hashes.
 2019-12-04 17:18:16 +02:00
CTCaer
29a51124fd Simplify string ops with already compiled-in functions 2019-12-04 15:56:53 +02:00
Kostas Missos
598073e50c ext patches: Remove patches_template.ini load 
Remove patches_template.ini load.
- It has useless patches, which some times, users confuse them for "bad" patches, even though they aren't.
- No one reads on how it works and it's constantly mishandled when there's no patches.ini (which completely overrides it).
- It was not supposed to be edited.

Also release will not include it anymore.
Template will still exist for demonstrating the syntax of `patches.ini`

This commit also corrects the patches.ini encoding note as ASCII.
 2019-10-31 16:26:46 +02:00
shchmue
426c86182d heap: Prevent node chain collapse on free 2019-10-25 11:20:38 -06:00
CTCaer
65fbdfddbf kfuse: Ensure that kfuse is ready 100% for tsec 2019-10-22 18:57:51 +03:00
Kostas Missos
7c42f72b8a refactor: Remove all unwanted whitespace 2019-10-18 18:02:06 +03:00
CTCaer
fe339120e2 Bump hekate to v5.0.2 and Nyx to v0.8.2 
Also rip hekate main's menu logo.

(It will be back :P)
 2019-09-12 23:55:48 +03:00
CTCaer
e24bb44adf hos: Add full 9.0.0 support 2019-09-12 23:41:08 +03:00
CTCaer
40afcfd686 hos: Support pkg2 encrypted with newer mkeys 2019-09-12 23:39:47 +03:00
CTCaer
658c3c112f hos: automatically find new kernel ini1 offset 2019-09-12 23:37:00 +03:00
CTCaer
8033ba461f SE: Boost its speed while BPMP cache is on 
Plus add se_aes_crypt_ecb().

Thanks @shchmue for pointing out that speed bump
 2019-09-12 23:27:04 +03:00
CTCaer
8cef81c901 nyx: Fix some inconsistencies with transparency 2019-09-12 23:20:38 +03:00
CTCaer
08d212d4da FatFS: Update to R0.13c (p4) and fix some crit issues 2019-09-12 23:18:39 +03:00
CTCaer
252a57ef6a util: Utilize BPMP sleep when usleep is out of bounds 2019-09-12 23:12:17 +03:00
CTCaer
23e246f224 i2c: Add missing clocks + more refactoring 2019-09-12 23:11:17 +03:00
CTCaer
3028568019 pmc-ccplex: Have proper Power Domain toggling 2019-09-12 23:09:38 +03:00
CTCaer
a8d529cf6a Refactoring and comment adding 2019-09-12 23:08:38 +03:00
CTCaer
c5b64a2b58 tsec: Don't disable HOST1x clock because it's used 
Tsec keys function always disabled host1x clock after running.
This interferes with display interface and disables further window frame syncing.
Display_end code already handles disable and reset of said clock.

It also fixes an ancient bug that was mitigated by removing the 5 frame sync on HOST1X_SYNC_SYNCPT_9 at channel 0:
5fd9daa364 (diff-6b0c56eab8515465d559ff0ea73a22c3L152)
 2019-09-11 02:19:41 +03:00
CTCaer
4c09454bca nyx options: Do not hide delay time if AutoBoot is off 2019-09-10 23:53:45 +03:00
CTCaer
29b86ce92b nyx: Refactor Options to a separate object 2019-09-10 23:35:17 +03:00
Kostas Missos
50ebcee45d nyx: Fix stray color tags (lvgl heap corruption) 2019-09-10 17:05:52 +03:00
Kostas Missos
718e502983 Add more register names + refactoring 2019-09-09 16:56:37 +03:00
Kostas Missos
c1e072986d Fix build issues 2019-09-09 15:48:49 +03:00
CTCaer
8045d7992b hwinit: FIx CPU/GPU on warmboot reboot from Linux 
Thanks @Stary2001 for all the testing!
 2019-09-01 03:55:43 +03:00
CTCaer
02826dd9a6 sdmmc: Streamline power cycle wait for Sandisks U1 2019-08-28 02:39:43 +03:00
CTCaer
c50e61f961 nyx: Support fixing archive bits for emuMMC 2019-08-28 02:27:13 +03:00
CTCaer
deb9c94bcd nyx: Check if split restore files are 4MB aligned 
This is a mitigation for cluster version of FastFS.
During a split restore, it is allowed only once to write a cluster that is not full.
 2019-08-28 02:25:48 +03:00
CTCaer
6cc3d9df67 nyx: Fix eMMC split restore when < 10 parts 
Now it properly follows the double digit scheme.
(rawnand.bin.##)
 2019-08-28 02:23:46 +03:00
CTCaer
92a60a1e89 nyx: Various fixes 2019-08-28 02:20:48 +03:00
CTCaer
f3d071ca69 mem: Remove memalign 
It doesn't do what it should anyway.
 2019-08-28 02:08:12 +03:00
CTCaer
9533dea124 nyx: Update AutoRCM status on eMMC restore 2019-08-28 02:06:19 +03:00