mirrors/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate.git synced 2024-11-08 03:21:44 +00:00
Code Issues Releases Activity
1652 commits 2 branches 75 tags 6.7 MiB
Commit graph

1652 commits

This branch
This branch
All branches
Author SHA1 Message Date
CTCaer
4a24fe0b35 bdk: display: add useful functions 
- Window disable
- Window framebuffer address set
- Window framebuffer move to new address
 2024-06-06 06:27:30 +03:00
CTCaer
14c482ddce bdk: display: remove max77620 gpio 7 enable 
It is actually not used at all.
So do not configure it to save power.
 2024-06-05 15:20:27 +03:00
CTCaer
8d49bc3c33 bdk: hwinit: move LDO8 init in regulators init 
And also reorder it above I2C1 init (because of HOAG).
 2024-06-05 01:35:05 +03:00
CTCaer
39c614a3ab bdk: hwinit: move sd2 to hw init 
SD2 powers LDO0/1/8 on T210B01 so there's no need to be in display init.
Also there's not need to power it down first so configure it in one go.
 2024-06-05 01:33:15 +03:00
CTCaer
7652d9cdb1 bdk: display: use mipi cal sw war on T210 also 
As per Nvidia, the pad brick separates clock and data terminations.
This necessitates doing the calibration twice.

Nvidia/Nintendo probably never updated that part on T210 since it's from around
2015/2016. T210B01 is based on 2017 codebase so it has it.
HOS (nvservices, not boot) is probably updated to also do that.
If not, then they should fix it.

There are 0 known issue reports with that on T210, but well.
 2024-06-05 01:11:04 +03:00
CTCaer
21d782587f hekate/nyx: adhere to display function renames 2024-06-05 01:03:46 +03:00
CTCaer
48ef1826e9 bdk: display: rename functions 
display_init_framebuffer_pitch -> display_init_window_a_pitch
display_init_framebuffer_pitch_vic -> display_init_window_a_pitch_vic
display_init_framebuffer_pitch_inv -> display_init_window_a_pitch_inv
display_init_framebuffer_block -> display_init_window_a_block
display_init_framebuffer_log -> display_init_window_d_console
display_activate_console -> display_window_d_console_enable
display_deactivate_console -> display_window_d_console_disable
display_init_cursor -> display_cursor_init
display_set_pos_cursor -> display_cursor_set_pos
display_deinit_cursor -> display_cursor_deinit
 2024-06-05 01:00:58 +03:00
CTCaer
4fef1890aa bdk: rename exec_cfg to reg_write_array 
And cfg_op_t to reg_cfg_t.
 2024-06-05 00:49:15 +03:00
CTCaer
320b91a767 bdk: display: return duty for oled panel properly 
For display_get_backlight_brightness.
 2024-06-02 08:23:58 +03:00
CTCaer
c5f6837c35 bdk: display: wait 1 frame after display off cmd 2024-06-02 08:23:13 +03:00
CTCaer
72f980d0f4 bdk: display: fully streamline dc/win setup 
As explained before, Nvidia just grabbed the whole dynamic init and made arrays
of it, without actually optimizing it.
The second part of the streamline aims to fully de-duplicate that.
- Completely remove all already set registers for DC/DISP/WIN.
- Do not touch other windows when a specific window is setup.
- Init Window D also together with A/B/C since code is made for DISPA.
- Add missing increase for syncpt 1.
 2024-06-02 08:22:20 +03:00
CTCaer
b3be7e7a41 bdk: display: use the same HS exit threshold 
No need to use minimum on T210.
Use the same byte clocks as T210B01 to simplify init.
 2024-06-02 08:11:22 +03:00
CTCaer
26c6c6372d bdk: display: rename window setup arrays 
Add window number info and remove the fb naming
 2024-06-02 08:05:50 +03:00
CTCaer
28eb3f4bcd bdk: display: deduplicate array size macro 2024-06-02 08:02:44 +03:00
CTCaer
bd55a3e756 bdk: clock: always set DISPA source 
No need to distinguish between LP or HS.
Setting the same value doesn't glitch.
 2024-06-02 08:00:42 +03:00
CTCaer
146ff53a31 hekate: set bpmp high clock earlier 2024-06-02 07:57:22 +03:00
CTCaer
a96cac5964 hekate: adjust payload sd wait 
hekate always waits at init, so not need to do that 2 times.
 2024-06-02 07:56:07 +03:00
CTCaer
b01cc2432f bdk: irq: remove ack source 
HW interrupts can't be managed by FIR.
Only actual hw can clear the interrupt.
 2024-06-02 07:46:18 +03:00
CTCaer
05db43a97c bdk: hwinit: move down debug uart init 2024-06-02 07:44:22 +03:00
CTCaer
859811a154 bdk: fatfs: update copyright 
Last edit was in 2022.
 2024-06-02 07:42:35 +03:00
CTCaer
0a6521ec26 Update "about" copyrights 2024-06-02 07:41:18 +03:00
CTCaer
6b54c4a477 bdk: usb: hid: don't send a packet if no new data 
Reduce the interrupt caused at the host side
 2024-06-02 07:40:11 +03:00
CTCaer
e46f54d4e6 hekate/nyx: use static/const where it should 2024-06-02 07:38:07 +03:00
CTCaer
9d79af231e bdk: use static where it should 2024-06-02 07:09:34 +03:00
CTCaer
d933aa80f7 hekate: use IRAM for stack 2024-06-02 07:04:17 +03:00
CTCaer
84c5439c70 bdk: usb: utilize apb relaxed clocks for init 2024-06-02 07:01:31 +03:00
CTCaer
ddd19661bd nyx: use bpmp relaxed func 2024-06-02 06:55:25 +03:00
CTCaer
78cdb5575d hos: use new func 2024-06-02 06:53:40 +03:00
CTCaer
8c44969afb bdk: blz: refactor style 2024-06-02 06:51:47 +03:00
CTCaer
7a74761da9 bdk: bpmp: add and use bpmp_clk_rate_relaxed 2024-06-02 06:51:06 +03:00
CTCaer
14706cef4e bdk: minerva: add emc src div disable 2024-06-02 06:46:28 +03:00
CTCaer
93296c2c38 bdk: joycon: add packet size checks 
Pass the real received data size and do the proper checks for minimum info.
 2024-05-19 17:42:10 +03:00
CTCaer
b744f82942 nyx: report right stick coordinates in debug 
- Add right stick x/y
- Remove calibration x/y min/max
 2024-05-19 12:19:26 +03:00
CTCaer
c4567ab2b5 nyx: set touch indev also and name them 
Just keep it around for any reference.
 2024-05-19 12:08:47 +03:00
CTCaer
0544f9143f nyx: tools: allow dynamic size for boot partitions 
Let UMS driver set the size in case the partition is bigger.
That doesn't affect anything other than allowing the host to see the whole
physical partition.
 2024-05-19 10:58:53 +03:00
CTCaer
a070d2e394 bdk: ums: allow real sizes for boot partitions 
Since that's eMMC, do not clamp the size to 4MB.
That doesn't affect anything other than allowing the host to see the whole
physical partition .
 2024-05-19 10:57:20 +03:00
CTCaer
927489d2da bdk: add missed defines 2024-05-19 10:50:25 +03:00
CTCaer
5453c593a3 hekate/nyx: adhere to hw_deinit change 2024-05-19 10:49:46 +03:00
CTCaer
ae29f359ee bdk: hwinit: rename reinit_workaround to deinit 2024-05-19 10:49:25 +03:00
CTCaer
7af343dd6c bdk: input: make joycon detection more robust 
There's a hw bug on the gpio controller that can latch the last value on reads.
Mitigate that by reading once to unlatch the input value.

Also actually allow sio to be polled every 8ms.
 2024-05-19 10:19:25 +03:00
CTCaer
547a3542ee bdk: display: add more defines 2024-05-19 10:16:52 +03:00
CTCaer
4bc0a0591c bdk: display: wait 2us for bl pwm config to take 
Fixes the tiny blink showing up while pwm is still at max.
 2024-05-19 10:15:52 +03:00
CTCaer
1214ab0e02 ldr/bl: manage arbiter 2024-05-19 10:12:18 +03:00
CTCaer
985c513770 bdk: hwinit: add arbiter config 2024-05-19 10:07:06 +03:00
CTCaer
16eb6a3c44 bdk: types: do not overflow on byte swaps 
Addresses warning message.
 2024-04-25 16:57:43 +03:00
CTCaer
ef1e328e11 bdk: info: revamp eMMC partition table info 
Allow a max of 20 partitions to be shown
 2024-04-25 04:57:31 +03:00
CTCaer
856994e4f4 bdk: sprintf: add right padding support 2024-04-25 04:56:38 +03:00
CTCaer
77782b974c nyx: info: report oem id for eMMC 2024-04-25 04:55:17 +03:00
CTCaer
38f4902e1d nyx: info: change touch fw version format 2024-04-25 04:54:58 +03:00
CTCaer
90b9f9f589 hos: add comments about autonogc 2024-04-25 04:53:06 +03:00