CTCaer
c5f6837c35
bdk: display: wait 1 frame after display off cmd
2024-06-02 08:23:13 +03:00
CTCaer
72f980d0f4
bdk: display: fully streamline dc/win setup
...
As explained before, Nvidia just grabbed the whole dynamic init and made arrays
of it, without actually optimizing it.
The second part of the streamline aims to fully de-duplicate that.
- Completely remove all already set registers for DC/DISP/WIN.
- Do not touch other windows when a specific window is setup.
- Init Window D also together with A/B/C since code is made for DISPA.
- Add missing increase for syncpt 1.
2024-06-02 08:22:20 +03:00
CTCaer
b3be7e7a41
bdk: display: use the same HS exit threshold
...
No need to use minimum on T210.
Use the same byte clocks as T210B01 to simplify init.
2024-06-02 08:11:22 +03:00
CTCaer
26c6c6372d
bdk: display: rename window setup arrays
...
Add window number info and remove the fb naming
2024-06-02 08:05:50 +03:00
CTCaer
28eb3f4bcd
bdk: display: deduplicate array size macro
2024-06-02 08:02:44 +03:00
CTCaer
bd55a3e756
bdk: clock: always set DISPA source
...
No need to distinguish between LP or HS.
Setting the same value doesn't glitch.
2024-06-02 08:00:42 +03:00
CTCaer
146ff53a31
hekate: set bpmp high clock earlier
2024-06-02 07:57:22 +03:00
CTCaer
a96cac5964
hekate: adjust payload sd wait
...
hekate always waits at init, so not need to do that 2 times.
2024-06-02 07:56:07 +03:00
CTCaer
b01cc2432f
bdk: irq: remove ack source
...
HW interrupts can't be managed by FIR.
Only actual hw can clear the interrupt.
2024-06-02 07:46:18 +03:00
CTCaer
05db43a97c
bdk: hwinit: move down debug uart init
2024-06-02 07:44:22 +03:00
CTCaer
859811a154
bdk: fatfs: update copyright
...
Last edit was in 2022.
2024-06-02 07:42:35 +03:00
CTCaer
0a6521ec26
Update "about" copyrights
2024-06-02 07:41:18 +03:00
CTCaer
6b54c4a477
bdk: usb: hid: don't send a packet if no new data
...
Reduce the interrupt caused at the host side
2024-06-02 07:40:11 +03:00
CTCaer
e46f54d4e6
hekate/nyx: use static/const where it should
2024-06-02 07:38:07 +03:00
CTCaer
9d79af231e
bdk: use static where it should
2024-06-02 07:09:34 +03:00
CTCaer
d933aa80f7
hekate: use IRAM for stack
2024-06-02 07:04:17 +03:00
CTCaer
84c5439c70
bdk: usb: utilize apb relaxed clocks for init
2024-06-02 07:01:31 +03:00
CTCaer
ddd19661bd
nyx: use bpmp relaxed func
2024-06-02 06:55:25 +03:00
CTCaer
78cdb5575d
hos: use new func
2024-06-02 06:53:40 +03:00
CTCaer
8c44969afb
bdk: blz: refactor style
2024-06-02 06:51:47 +03:00
CTCaer
7a74761da9
bdk: bpmp: add and use bpmp_clk_rate_relaxed
2024-06-02 06:51:06 +03:00
CTCaer
14706cef4e
bdk: minerva: add emc src div disable
2024-06-02 06:46:28 +03:00
CTCaer
93296c2c38
bdk: joycon: add packet size checks
...
Pass the real received data size and do the proper checks for minimum info.
2024-05-19 17:42:10 +03:00
CTCaer
b744f82942
nyx: report right stick coordinates in debug
...
- Add right stick x/y
- Remove calibration x/y min/max
2024-05-19 12:19:26 +03:00
CTCaer
c4567ab2b5
nyx: set touch indev also and name them
...
Just keep it around for any reference.
2024-05-19 12:08:47 +03:00
CTCaer
0544f9143f
nyx: tools: allow dynamic size for boot partitions
...
Let UMS driver set the size in case the partition is bigger.
That doesn't affect anything other than allowing the host to see the whole
physical partition.
2024-05-19 10:58:53 +03:00
CTCaer
a070d2e394
bdk: ums: allow real sizes for boot partitions
...
Since that's eMMC, do not clamp the size to 4MB.
That doesn't affect anything other than allowing the host to see the whole
physical partition .
2024-05-19 10:57:20 +03:00
CTCaer
927489d2da
bdk: add missed defines
2024-05-19 10:50:25 +03:00
CTCaer
5453c593a3
hekate/nyx: adhere to hw_deinit change
2024-05-19 10:49:46 +03:00
CTCaer
ae29f359ee
bdk: hwinit: rename reinit_workaround to deinit
2024-05-19 10:49:25 +03:00
CTCaer
7af343dd6c
bdk: input: make joycon detection more robust
...
There's a hw bug on the gpio controller that can latch the last value on reads.
Mitigate that by reading once to unlatch the input value.
Also actually allow sio to be polled every 8ms.
2024-05-19 10:19:25 +03:00
CTCaer
547a3542ee
bdk: display: add more defines
2024-05-19 10:16:52 +03:00
CTCaer
4bc0a0591c
bdk: display: wait 2us for bl pwm config to take
...
Fixes the tiny blink showing up while pwm is still at max.
2024-05-19 10:15:52 +03:00
CTCaer
1214ab0e02
ldr/bl: manage arbiter
2024-05-19 10:12:18 +03:00
CTCaer
985c513770
bdk: hwinit: add arbiter config
2024-05-19 10:07:06 +03:00
CTCaer
16eb6a3c44
bdk: types: do not overflow on byte swaps
...
Addresses warning message.
2024-04-25 16:57:43 +03:00
CTCaer
ef1e328e11
bdk: info: revamp eMMC partition table info
...
Allow a max of 20 partitions to be shown
2024-04-25 04:57:31 +03:00
CTCaer
856994e4f4
bdk: sprintf: add right padding support
2024-04-25 04:56:38 +03:00
CTCaer
77782b974c
nyx: info: report oem id for eMMC
2024-04-25 04:55:17 +03:00
CTCaer
38f4902e1d
nyx: info: change touch fw version format
2024-04-25 04:54:58 +03:00
CTCaer
90b9f9f589
hos: add comments about autonogc
2024-04-25 04:53:06 +03:00
CTCaer
ec2e62236a
bdk: pinmux: add i2s pin config
2024-04-25 04:52:13 +03:00
CTCaer
2648a2655c
bdk: sdram: add info about custom 8GB T210 config
...
That's a suggestion on which 4GB modules are certainly fine to use.
2024-04-25 04:50:07 +03:00
CTCaer
62153fdfbb
bdk: types: add likely/unlikely global macros
2024-04-25 04:48:09 +03:00
CTCaer
28960728f9
bdk: joycon: add bit numbers on the button struct
2024-04-25 04:46:27 +03:00
CTCaer
902ccede9a
bdk: joycon: use proper bits for batt levels
2024-04-25 04:45:50 +03:00
CTCaer
96efa7a002
bdk: vic: add support for P8 and R5G5B5
2024-04-25 04:44:22 +03:00
CTCaer
d92906db5e
bdk: display: correct some reg names and add more
2024-04-25 04:44:08 +03:00
CTCaer
e8d6516f43
bdk: display: use basic profile for OLED
...
That's the one with the accurate sRGB colors.
Anything else is over saturated.
2024-04-25 04:38:57 +03:00
CTCaer
a6727f6e32
bdk: display: update active regs on vsync for WinD
...
Doing that on hsync can cause issues on disable without actually syncing to it.
2024-04-25 04:38:04 +03:00
